Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 723) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 123) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 51714506
- 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2151
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 103795349
- 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7888
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 5
- 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2083
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 084 084 000 Old_age Always - 16
- 188 Command_Timeout 0x0032 100 092 000 Old_age Always - 17180133514
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 057 046 045 Old_age Always - 43 (Min/Max 24/43)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 771
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 99
- 193 Load_Cycle_Count 0x0032 027 027 000 Old_age Always - 146821
- 194 Temperature_Celsius 0x0022 043 054 000 Old_age Always - 43 (0 14 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 053 048 000 Old_age Always - 51714506
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 16 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 16 occurred at disk power-on lifetime: 6798 hours (283 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e2 03 43 01 Error: UNC at LBA = 0x014303e2 = 21169122
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 30 de 03 43 41 00 05:26:07.622 READ FPDMA QUEUED
- 60 00 42 9c 03 43 41 00 05:26:07.422 READ FPDMA QUEUED
- 60 00 2b 71 03 43 41 00 05:26:07.222 READ FPDMA QUEUED
- 60 00 41 30 03 43 41 00 05:26:07.023 READ FPDMA QUEUED
- 61 00 02 60 02 5b 42 00 05:26:06.922 WRITE FPDMA QUEUED
- Error 15 occurred at disk power-on lifetime: 5666 hours (236 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 96 bd db 03 Error: UNC at LBA = 0x03dbbd96 = 64732566
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 80 50 ba db 43 00 02:17:13.303 READ FPDMA QUEUED
- 60 00 80 d0 b9 db 43 00 02:17:13.299 READ FPDMA QUEUED
- 60 00 01 00 f8 47 4c 00 02:17:13.286 READ FPDMA QUEUED
- 60 00 01 00 08 36 49 00 02:17:13.285 READ FPDMA QUEUED
- 60 00 01 00 a0 98 48 00 02:17:13.285 READ FPDMA QUEUED
- Error 14 occurred at disk power-on lifetime: 5666 hours (236 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 98 bd db 03 Error: UNC at LBA = 0x03dbbd98 = 64732568
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 98 bd db 43 00 02:17:10.743 READ FPDMA QUEUED
- 60 00 01 00 f8 47 4c 00 02:17:10.532 READ FPDMA QUEUED
- 60 00 01 00 08 36 49 00 02:17:10.531 READ FPDMA QUEUED
- 60 00 01 00 a0 98 48 00 02:17:10.531 READ FPDMA QUEUED
- 60 00 01 00 00 00 40 00 02:17:10.410 READ FPDMA QUEUED
- Error 13 occurred at disk power-on lifetime: 5666 hours (236 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 98 bd db 03 Error: UNC at LBA = 0x03dbbd98 = 64732568
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 98 bd db 43 00 02:17:08.008 READ FPDMA QUEUED
- 60 00 01 00 f8 47 4c 00 02:17:07.800 READ FPDMA QUEUED
- 60 00 01 00 08 36 49 00 02:17:07.800 READ FPDMA QUEUED
- 60 00 01 00 a0 98 48 00 02:17:07.799 READ FPDMA QUEUED
- 60 00 01 00 00 00 40 00 02:17:07.678 READ FPDMA QUEUED
- Error 12 occurred at disk power-on lifetime: 5666 hours (236 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 98 bd db 03 Error: UNC at LBA = 0x03dbbd98 = 64732568
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 98 bd db 43 00 02:17:05.290 READ FPDMA QUEUED
- 60 00 01 00 f8 47 4c 00 02:17:05.090 READ FPDMA QUEUED
- 60 00 01 00 08 36 49 00 02:17:05.090 READ FPDMA QUEUED
- 60 00 01 00 a0 98 48 00 02:17:05.090 READ FPDMA QUEUED
- 60 00 01 00 00 00 40 00 02:17:04.969 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement