Guest User

ForceWare 1.2

a guest
Jan 17th, 2015
484
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.18 KB | None | 0 0
  1. ▒▒Flash: 16 MB
  2. Starting LZMA Uncompression Algorithm.
  3. Compressed file is LZMA format.
  4. Linux version 2.6.18_pro500 ([email protected]) (gcc version 4.2.0 TI-Puma5 20100224) #247 PREEMPT Sun Oct 21 13:26:49 EDT 2012
  5. CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
  6. Machine: puma5
  7. Ignoring unrecognised tag 0x00000000
  8. Memory policy: ECC disabled, Data cache writethrough
  9. Reserved 1024k DSP memory starting from Physical 0x83f00000
  10. CPU0: D VIPT write-back cache
  11. CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  12. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  13. Real-Time Preemption Support (C) 2004-2006 Ingo Molnar
  14. Built 1 zonelists. Total pages: 16128
  15. Kernel command line: root=/dev/mtdblock3 mtdparts=spansion:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x280000@0xe0000(fWare-FS),0x50000@0xFB0000(nvram),0x7B0000@0x40000(UBFI1),0x7B0000@0x7F0000(UBFI2) console=ttyS0,115200n8
  16. WARNING: experimental RCU implementation.
  17. Interrupt controller revision : 4e822100
  18. PID hash table entries: 256 (order: 8, 1024 bytes)
  19. Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
  20. USB PHY POR Bypass enabled
  21. WARN: boardtype variable was not set, using default (tnetc550)
  22. Board type: tnetc550
  23. Initialized Peripheral Port Remap Register to base : 0x50000000
  24. Puma5 Timer0 initialized
  25. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  26. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. Memory: 63MB = 63MB total
  28. Memory: 61948KB available (1556K code, 334K data, 68K init)
  29. Mount-cache hash table entries: 512
  30. CPU: Testing write buffer coherency: ok
  31. NET: Registered protocol family 16
  32. PAL_cppi4Init : There is a room for 1314 more descriptors
  33. Off chip memory allocated: 349184
  34. QMgr Init: buffer after alignment: 83e00000
  35. avalanche_ppd_init: PP system initialized successfully.
  36. avalanche_ppd_init(729):return code 0x00
  37. HIL Core: Profile static has been Loaded.
  38. NET: Registered protocol family 2
  39. IP route cache hash table entries: 512 (order: -1, 2048 bytes)
  40. TCP established hash table entries: 2048 (order: 4, 65536 bytes)
  41. TCP bind hash table entries: 1024 (order: 2, 28672 bytes)
  42. TCP: Hash tables configured (established 2048 bind 1024)
  43. TCP reno registered
  44. squashfs: version 3.3 (2007/10/31) Phillip Lougher
  45. squashfs: LZMA suppport for slax.org by jro
  46. JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
  47. io scheduler noop registered (default)
  48. watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
  49. TI LED driver initialized [major=254]
  50. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
  51. serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
  52. serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
  53. loop: loaded (max 8 devices)
  54. Loading cpgmac driver for puma5
  55. Cpmac: Error getting mac from Boot enviroment for eth0
  56. Cpmac: Using default mac address: 08.00.28.32.06.02
  57. Pass kernel parameter ethaddr0=xx.xx.xx.xx.xx.xx
  58. to set mac address
  59. TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
  60. Cpmac: Installed 1 instances.
  61. Cpmac driver is allocating buffer memory at init time.
  62. i2c /dev entries driver
  63. Serial Flash [Bus:0 CS:0] : s25fl128p 16384KB, 256 sectors each 64KB
  64. 7 cmdlinepart partitions found on MTD device spansion
  65. partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
  66. partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
  67. partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
  68. partitions[3] = {.name = fWare-FS, .offset = 0x000e0000,.size = 0x00280000 (2560K) }
  69. partitions[4] = {.name = nvram, .offset = 0x00fb0000,.size = 0x00050000 (320K) }
  70. partitions[5] = {.name = UBFI1, .offset = 0x00040000,.size = 0x007b0000 (7872K) }
  71. partitions[6] = {.name = UBFI2, .offset = 0x007f0000,.size = 0x007b0000 (7872K) }
  72. Creating 7 MTD partitions on "spansion":
  73. 0x00000000-0x00020000 : "U-Boot"
  74. 0x00020000-0x00030000 : "env1"
  75. 0x00030000-0x00040000 : "env2"
  76. 0x000e0000-0x00360000 : "fWare-FS"
  77. 0x00fb0000-0x01000000 : "nvram"
  78. 0x00040000-0x007f0000 : "UBFI1"
  79. 0x007f0000-0x00fa0000 : "UBFI2"
  80. Serial Flash [Bus:0 CS:1] : No device found
  81. ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
  82. ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
  83. TCP bic registered
  84. NET: Registered protocol family 1
  85. NET: Registered protocol family 17
  86. VFS: Mounted root (squashfs filesystem) readonly.
  87. Freeing init memory: 68K
  88.  
  89. ____________________________________________________________________________
  90. ____________________________________________________________________________
  91. __ __ __
  92. / _| ___ _ __ ___ __\ \ / /_ _ _ __ ___
  93. | |_ / _ \| `_// _// _ \ \ /\ / / _` | `__/ _ \
  94. | _| (_) | | | (_| __/\ V V / (_| | | | __/
  95. |_| \___/|_| \___\___| \_/\_/ \__,_|_| \___| (v1.2) by mforce
  96. ____________________________________________________________________________
  97. ____________________________________________________________________________
  98.  
  99.  
  100.  
  101.  
  102.  
  103. Please press Enter to activate this console. netlink_open: initialized fd 6
  104. 1970-01-01 00:00:14: (log.c.166) server started
Advertisement
Add Comment
Please, Sign In to add comment