Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

dhkmesg

By: a guest on Jul 17th, 2010  |  syntax: None  |  size: 48.94 KB  |  views: 67  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 2.6.35-rc5-next-20100716 (adam@QuoNos.KlingonEmpire) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Sat Jul 17 11:10:26 EDT 2010
  4. Command line: ro root=UUID=09fa5fcc-4a87-4d2a-bdf2-a0a5cc837bff  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
  5. BIOS-provided physical RAM map:
  6.  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  7.  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  8.  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
  9.  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
  10.  BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
  11.  BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
  12.  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
  13.  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
  14.  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
  15. NX (Execute Disable) protection: active
  16. DMI present.
  17. AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  18. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  19. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
  20. e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  21. No AGP bridge found
  22. last_pfn = 0x120000 max_arch_pfn = 0x400000000
  23. MTRR default type: uncachable
  24. MTRR fixed ranges enabled:
  25.   00000-9FFFF write-back
  26.   A0000-EFFFF uncachable
  27.   F0000-FFFFF write-protect
  28. MTRR variable ranges enabled:
  29.   0 base 000000000000 mask FFFF80000000 write-back
  30.   1 base 000080000000 mask FFFFC0000000 write-back
  31.   2 base 0000C0000000 mask FFFFF0000000 write-back
  32.   3 disabled
  33.   4 disabled
  34.   5 disabled
  35.   6 disabled
  36.   7 disabled
  37. TOM2: 0000000130000000 aka 4864M
  38. x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  39. e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
  40. last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
  41. initial memory mapped : 0 - 20000000
  42. found SMP MP-table at [ffff8800000ff780] ff780
  43. Using GB pages for direct mapping
  44. init_memory_mapping: 0000000000000000-00000000cffb0000
  45.  0000000000 - 00c0000000 page 1G
  46.  00c0000000 - 00cfe00000 page 2M
  47.  00cfe00000 - 00cffb0000 page 4k
  48. kernel direct mapping tables up to cffb0000 @ 16000-19000
  49. init_memory_mapping: 0000000100000000-0000000120000000
  50.  0100000000 - 0120000000 page 2M
  51. kernel direct mapping tables up to 120000000 @ 18000-1a000
  52. RAMDISK: 371be000 - 37ff0000
  53. ACPI: RSDP 00000000000faa40 00024 (v02 ACPIAM)
  54. ACPI: XSDT 00000000cffb0100 0005C (v01 032410 XSDT1458 20100324 MSFT 00000097)
  55. ACPI: FACP 00000000cffb0290 000F4 (v04 032410 FACP1458 20100324 MSFT 00000097)
  56. ACPI: DSDT 00000000cffb0450 054D4 (v02  1AAAA 1AAAA000 00000000 INTL 20051117)
  57. ACPI: FACS 00000000cffbe000 00040
  58. ACPI: APIC 00000000cffb0390 0007C (v02 032410 APIC1458 20100324 MSFT 00000097)
  59. ACPI: MCFG 00000000cffb0410 0003C (v01 032410 OEMMCFG  20100324 MSFT 00000097)
  60. ACPI: OEMB 00000000cffbe040 00072 (v01 032410 OEMB1458 20100324 MSFT 00000097)
  61. ACPI: SRAT 00000000cffb5930 00108 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
  62. ACPI: HPET 00000000cffb5a40 00038 (v01 032410 OEMHPET  20100324 MSFT 00000097)
  63. ACPI: SSDT 00000000cffb5a80 00CC0 (v01 A M I  POWERNOW 00000001 AMD  00000001)
  64. ACPI: Local APIC address 0xfee00000
  65. SRAT: PXM 0 -> APIC 0x00 -> Node 0
  66. SRAT: PXM 0 -> APIC 0x01 -> Node 0
  67. SRAT: PXM 0 -> APIC 0x02 -> Node 0
  68. SRAT: PXM 0 -> APIC 0x03 -> Node 0
  69. SRAT: PXM 0 -> APIC 0x04 -> Node 0
  70. SRAT: PXM 0 -> APIC 0x05 -> Node 0
  71. SRAT: Node 0 PXM 0 0-a0000
  72. SRAT: Node 0 PXM 0 100000-d0000000
  73. SRAT: Node 0 PXM 0 100000000-130000000
  74. SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
  75. SRAT: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000)
  76. NUMA: Using 63 for the hash shift.
  77. Initmem setup node 0 0000000000000000-0000000120000000
  78.   NODE_DATA [0000000100000000 - 0000000100013fff]
  79.  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880100200000-ffff8801037fffff] on node 0
  80. Zone PFN ranges:
  81.   DMA      0x00000010 -> 0x00001000
  82.   DMA32    0x00001000 -> 0x00100000
  83.   Normal   0x00100000 -> 0x00120000
  84. Movable zone start PFN for each node
  85. early_node_map[3] active PFN ranges
  86.     0: 0x00000010 -> 0x0000009f
  87.     0: 0x00000100 -> 0x000cffb0
  88.     0: 0x00100000 -> 0x00120000
  89. On node 0 totalpages: 982847
  90.   DMA zone: 56 pages used for memmap
  91.   DMA zone: 0 pages reserved
  92.   DMA zone: 3927 pages, LIFO batch:0
  93.   DMA32 zone: 14280 pages used for memmap
  94.   DMA32 zone: 833512 pages, LIFO batch:31
  95.   Normal zone: 1792 pages used for memmap
  96.   Normal zone: 129280 pages, LIFO batch:31
  97. ACPI: PM-Timer IO Port: 0x808
  98. ACPI: Local APIC address 0xfee00000
  99. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  100. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  101. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  102. ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  103. ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
  104. ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
  105. ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
  106. IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
  107. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  108. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  109. ACPI: IRQ0 used by override.
  110. ACPI: IRQ2 used by override.
  111. ACPI: IRQ9 used by override.
  112. Using ACPI (MADT) for SMP configuration information
  113. ACPI: HPET id: 0x8300 base: 0xfed00000
  114. SMP: Allowing 6 CPUs, 0 hotplug CPUs
  115. nr_irqs_gsi: 40
  116. early_res array is doubled to 64 at [19000 - 197ff]
  117. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  118. PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
  119. PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
  120. PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
  121. PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
  122. PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
  123. PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
  124. PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
  125. Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
  126. Booting paravirtualized kernel on bare hardware
  127. setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
  128. PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90560 r8192 d24128 u262144
  129. pcpu-alloc: s90560 r8192 d24128 u262144 alloc=1*2097152
  130. pcpu-alloc: [0] 0 1 2 3 4 5 - -
  131. Built 1 zonelists in Node order, mobility grouping on.  Total pages: 966719
  132. Policy zone: Normal
  133. Kernel command line: ro root=UUID=09fa5fcc-4a87-4d2a-bdf2-a0a5cc837bff  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
  134. PID hash table entries: 4096 (order: 3, 32768 bytes)
  135. Checking aperture...
  136. No AGP bridge found
  137. Node 0: aperture @ 140000000 size 32 MB
  138. Aperture beyond 4GB. Ignoring.
  139. Your BIOS doesn't leave a aperture memory hole
  140. Please enable the IOMMU option in the BIOS setup
  141. This costs you 64 MB of RAM
  142. Mapping aperture over 65536 KB of RAM @ 20000000
  143. PM: Registered nosave memory: 0000000020000000 - 0000000024000000
  144. early_res array is doubled to 128 at [19800 - 1a7ff]
  145. Subtract (59 early reservations)
  146.   #1 [0001000000 - 0001dca668]   TEXT DATA BSS
  147.   #2 [00371be000 - 0037ff0000]         RAMDISK
  148.   #3 [0001dcb000 - 0001dcb0f1]             BRK
  149.   #4 [00000ff790 - 0000100000]   BIOS reserved
  150.   #5 [00000ff780 - 00000ff790]    MP-table mpf
  151.   #6 [000009f400 - 00000fcce0]   BIOS reserved
  152.   #7 [00000fce9c - 00000ff780]   BIOS reserved
  153.   #8 [00000fcce0 - 00000fce9c]    MP-table mpc
  154.   #9 [0000010000 - 0000012000]      TRAMPOLINE
  155.   #10 [0000012000 - 0000016000]     ACPI WAKEUP
  156.   #11 [0000016000 - 0000018000]         PGTABLE
  157.   #12 [0000018000 - 0000019000]         PGTABLE
  158.   #13 [0100000000 - 0100014000]       NODE_DATA
  159.   #14 [0001dcb100 - 0001dcc100]         BOOTMEM
  160.   #15 [0100014000 - 01000142d0]         BOOTMEM
  161.   #16 [0100015000 - 0100016000]         BOOTMEM
  162.   #17 [0100016000 - 0100017000]         BOOTMEM
  163.   #18 [0100200000 - 0103800000]        MEMMAP 0
  164.   #19 [0001dcc100 - 0001de4100]         BOOTMEM
  165.   #20 [0001de4100 - 0001dfc100]         BOOTMEM
  166.   #21 [0001dfc100 - 0001e14100]         BOOTMEM
  167.   #22 [0001e15000 - 0001e16000]         BOOTMEM
  168.   #23 [0001dca680 - 0001dca6c1]         BOOTMEM
  169.   #24 [0001dca700 - 0001dca743]         BOOTMEM
  170.   #25 [0001dca780 - 0001dca9b0]         BOOTMEM
  171.   #26 [0001dca9c0 - 0001dcaa28]         BOOTMEM
  172.   #27 [0001dcaa40 - 0001dcaaa8]         BOOTMEM
  173.   #28 [0001dcaac0 - 0001dcab28]         BOOTMEM
  174.   #29 [0001dcab40 - 0001dcaba8]         BOOTMEM
  175.   #30 [0001dcabc0 - 0001dcac28]         BOOTMEM
  176.   #31 [0001dcac40 - 0001dcaca8]         BOOTMEM
  177.   #32 [0001dcacc0 - 0001dcad28]         BOOTMEM
  178.   #33 [0001dcad40 - 0001dcada8]         BOOTMEM
  179.   #34 [0001dcadc0 - 0001dcae28]         BOOTMEM
  180.   #35 [0001dcae40 - 0001dcae60]         BOOTMEM
  181.   #36 [0001dcae80 - 0001dcaea0]         BOOTMEM
  182.   #37 [0001dcaec0 - 0001dcaf45]         BOOTMEM
  183.   #38 [0001e14100 - 0001e14185]         BOOTMEM
  184.   #39 [0002000000 - 000201e000]         BOOTMEM
  185.   #40 [0002040000 - 000205e000]         BOOTMEM
  186.   #41 [0002080000 - 000209e000]         BOOTMEM
  187.   #42 [00020c0000 - 00020de000]         BOOTMEM
  188.   #43 [0002100000 - 000211e000]         BOOTMEM
  189.   #44 [0002140000 - 000215e000]         BOOTMEM
  190.   #45 [0001dcaf80 - 0001dcaf88]         BOOTMEM
  191.   #46 [0001dcafc0 - 0001dcafc8]         BOOTMEM
  192.   #47 [0001e141c0 - 0001e141d8]         BOOTMEM
  193.   #48 [0001e14200 - 0001e14230]         BOOTMEM
  194.   #49 [0001e14240 - 0001e14360]         BOOTMEM
  195.   #50 [0001e14380 - 0001e143c8]         BOOTMEM
  196.   #51 [0001e14400 - 0001e14448]         BOOTMEM
  197.   #52 [0001e16000 - 0001e1e000]         BOOTMEM
  198.   #53 [0020000000 - 0024000000]         BOOTMEM
  199.   #54 [0001e14480 - 0001e144a0]         BOOTMEM
  200.   #55 [000215e000 - 000615e000]         BOOTMEM
  201.   #56 [0001e1e000 - 0001e3e000]         BOOTMEM
  202.   #57 [0001e3e000 - 0001e7e000]         BOOTMEM
  203.   #58 [000001a800 - 0000022800]         BOOTMEM
  204. Memory: 3714760k/4718592k available (4295k kernel code, 787204k absent, 216628k reserved, 7506k data, 740k init)
  205. SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  206. Hierarchical RCU implementation.
  207.         RCU-based detection of stalled CPUs is disabled.
  208.         Verbose stalled-CPUs detection is disabled.
  209. NR_IRQS:16640 nr_irqs:728
  210. Extended CMOS year: 2000
  211. Console: colour VGA+ 80x25
  212. console [tty0] enabled
  213. allocated 39321600 bytes of page_cgroup
  214. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  215. hpet clockevent registered
  216. Fast TSC calibration using PIT
  217. Detected 3592.051 MHz processor.
  218. Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.86 BogoMIPS (lpj=3192930)
  219. pid_max: default: 32768 minimum: 301
  220. Security Framework initialized
  221. SELinux:  Initializing.
  222. SELinux:  Starting in permissive mode
  223. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  224. Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  225. Mount-cache hash table entries: 256
  226. Initializing cgroup subsys ns
  227. Initializing cgroup subsys cpuacct
  228. Initializing cgroup subsys memory
  229. Initializing cgroup subsys devices
  230. Initializing cgroup subsys freezer
  231. Initializing cgroup subsys net_cls
  232. Initializing cgroup subsys blkio
  233. tseg: 0000000000
  234. CPU: Physical Processor ID: 0
  235. CPU: Processor Core ID: 0
  236. mce: CPU supports 6 MCE banks
  237. Performance Events: AMD PMU driver.
  238. ... version:                0
  239. ... bit width:              48
  240. ... generic registers:      4
  241. ... value mask:             0000ffffffffffff
  242. ... max period:             00007fffffffffff
  243. ... fixed-purpose events:   0
  244. ... event mask:             000000000000000f
  245. ACPI: Core revision 20100702
  246. Setting APIC routing to flat
  247. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  248. CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
  249. Booting Node   0, Processors  #1 #2 #3 #4 #5 Ok.
  250. Brought up 6 CPUs
  251. Total of 6 processors activated (38316.73 BogoMIPS).
  252. devtmpfs: initialized
  253. regulator: core version 0.5
  254. Time: 18:18:30  Date: 07/17/10
  255. NET: Registered protocol family 16
  256. node 0 link 0: io port [1000, ffffff]
  257. TOM: 00000000d0000000 aka 3328M
  258. Fam 10h mmconf [e0000000, efffffff]
  259. node 0 link 0: mmio [a0000, bffff]
  260. node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
  261. node 0 link 0: mmio [f0000000, fe5fffff]
  262. node 0 link 0: mmio [fe600000, fe7fffff]
  263. node 0 link 0: mmio [fe800000, ffefffff]
  264. TOM2: 0000000130000000 aka 4864M
  265. bus: [00, 07] on node 0 link 0
  266. bus: 00 index 0 [io  0x0000-0xffff]
  267. bus: 00 index 1 [mem 0x000a0000-0x000bffff]
  268. bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
  269. bus: 00 index 3 [mem 0xf0000000-0xffffffff]
  270. bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
  271. ACPI: bus type pci registered
  272. PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  273. PCI: not using MMCONFIG
  274. PCI: Using configuration type 1 for base access
  275. PCI: Using configuration type 1 for extended access
  276. bio: create slab <bio-0> at 0
  277. ACPI: EC: Look up EC in DSDT
  278. ACPI Error (dswload-0677): [PCI0] Namespace lookup failure, AE_NOT_FOUND
  279. ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20100702/psloop-231)
  280. ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81d5adb0), AE_NOT_FOUND
  281. ACPI: Executed 4 blocks of module-level executable AML code
  282. ACPI: Interpreter enabled
  283. ACPI: (supports S0 S3 S4 S5)
  284. ACPI: Using IOAPIC for interrupt routing
  285. PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  286. PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  287. ACPI: No dock devices found.
  288. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  289. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  290. pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
  291. pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
  292. pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
  293. pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
  294. pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
  295. pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
  296. pci 0000:00:11.0: reg 10: [io  0xb000-0xb007]
  297. pci 0000:00:11.0: reg 14: [io  0xa000-0xa003]
  298. pci 0000:00:11.0: reg 18: [io  0x9000-0x9007]
  299. pci 0000:00:11.0: reg 1c: [io  0x8000-0x8003]
  300. pci 0000:00:11.0: reg 20: [io  0x7000-0x700f]
  301. pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
  302. pci 0000:00:11.0: set SATA to AHCI mode
  303. pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
  304. pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
  305. pci 0000:00:12.2: supports D1 D2
  306. pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  307. pci 0000:00:12.2: PME# disabled
  308. pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
  309. pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
  310. pci 0000:00:13.2: supports D1 D2
  311. pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  312. pci 0000:00:13.2: PME# disabled
  313. pci 0000:00:14.0: reg 30: [mem 0x00000000-0x000007ff pref]
  314. pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
  315. pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
  316. pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
  317. pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
  318. pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
  319. pci 0000:00:14.2: reg 10: [mem 0xfe5f8000-0xfe5fbfff 64bit]
  320. pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  321. pci 0000:00:14.2: PME# disabled
  322. pci 0000:00:14.5: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
  323. pci 0000:00:15.0: supports D1 D2
  324. pci 0000:00:15.1: supports D1 D2
  325. pci 0000:00:16.0: reg 10: [mem 0xfe5f7000-0xfe5f7fff]
  326. pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
  327. pci 0000:00:16.2: supports D1 D2
  328. pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
  329. pci 0000:00:16.2: PME# disabled
  330. pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
  331. pci 0000:01:05.0: reg 14: [io  0xc000-0xc0ff]
  332. pci 0000:01:05.0: reg 18: [mem 0xfe7f0000-0xfe7fffff]
  333. pci 0000:01:05.0: reg 24: [mem 0xfe600000-0xfe6fffff]
  334. pci 0000:01:05.0: supports D1 D2
  335. pci 0000:01:05.1: reg 10: [mem 0xfe7e8000-0xfe7ebfff]
  336. pci 0000:01:05.1: supports D1 D2
  337. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  338. pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
  339. pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe7fffff]
  340. pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  341. pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
  342. pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
  343. pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
  344. pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  345. pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  346. pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  347. pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  348. pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  349. pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
  350. pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
  351. pci 0000:03:00.0: reg 10: [io  0xd800-0xd8ff]
  352. pci 0000:03:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
  353. pci 0000:03:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
  354. pci 0000:03:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
  355. pci 0000:03:00.0: supports D1 D2
  356. pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  357. pci 0000:03:00.0: PME# disabled
  358. pci 0000:00:15.0: PCI bridge to [bus 03-03]
  359. pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
  360. pci 0000:00:15.0:   bridge window [mem 0xfe800000-0xfe8fffff]
  361. pci 0000:00:15.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
  362. pci 0000:04:00.0: reg 10: [io  0xe800-0xe8ff]
  363. pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
  364. pci 0000:04:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
  365. pci 0000:04:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
  366. pci 0000:04:00.0: supports D1 D2
  367. pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  368. pci 0000:04:00.0: PME# disabled
  369. pci 0000:00:15.1: PCI bridge to [bus 04-04]
  370. pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
  371. pci 0000:00:15.1:   bridge window [mem 0xfe900000-0xfe9fffff]
  372. pci 0000:00:15.1:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
  373. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  374. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  375. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
  376. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
  377. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
  378. Unable to assume PCIe control: Disabling ASPM
  379. ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15)
  380. ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
  381. ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
  382. ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15)
  383. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 10 11 14 15) *0
  384. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
  385. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
  386. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
  387. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
  388. vgaarb: loaded
  389. SCSI subsystem initialized
  390. libata version 3.00 loaded.
  391. usbcore: registered new interface driver usbfs
  392. usbcore: registered new interface driver hub
  393. usbcore: registered new device driver usb
  394. PCI: Using ACPI for IRQ routing
  395. PCI: pci_cache_line_size set to 64 bytes
  396. reserve RAM buffer: 000000000009f400 - 000000000009ffff
  397. reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
  398. NetLabel: Initializing
  399. NetLabel:  domain hash size = 128
  400. NetLabel:  protocols = UNLABELED CIPSOv4
  401. NetLabel:  unlabeled traffic allowed by default
  402. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  403. hpet0: 3 comparators, 32-bit 14.318180 MHz counter
  404. Switching to clocksource tsc
  405. pnp: PnP ACPI init
  406. ACPI: bus type pnp registered
  407. pnp: PnP ACPI: found 12 devices
  408. ACPI: ACPI bus type pnp unregistered
  409. system 00:06: [io  0x0e00-0x0e0f] has been reserved
  410. system 00:06: [io  0x0e80-0x0e8f] has been reserved
  411. system 00:06: [io  0x0f40-0x0f4f] has been reserved
  412. system 00:06: [io  0x0a30-0x0a3f] has been reserved
  413. system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  414. system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
  415. system 00:09: [io  0x04d0-0x04d1] has been reserved
  416. system 00:09: [io  0x040b] has been reserved
  417. system 00:09: [io  0x04d6] has been reserved
  418. system 00:09: [io  0x0c00-0x0c01] has been reserved
  419. system 00:09: [io  0x0c14] has been reserved
  420. system 00:09: [io  0x0c50-0x0c51] has been reserved
  421. system 00:09: [io  0x0c52] has been reserved
  422. system 00:09: [io  0x0c6c] has been reserved
  423. system 00:09: [io  0x0c6f] has been reserved
  424. system 00:09: [io  0x0cd0-0x0cd1] has been reserved
  425. system 00:09: [io  0x0cd2-0x0cd3] has been reserved
  426. system 00:09: [io  0x0cd4-0x0cd5] has been reserved
  427. system 00:09: [io  0x0cd6-0x0cd7] has been reserved
  428. system 00:09: [io  0x0cd8-0x0cdf] has been reserved
  429. system 00:09: [io  0x0800-0x089f] has been reserved
  430. system 00:09: [io  0x0b00-0x0b1f] has been reserved
  431. system 00:09: [io  0x0b20-0x0b3f] has been reserved
  432. system 00:09: [io  0x0900-0x090f] has been reserved
  433. system 00:09: [io  0x0910-0x091f] has been reserved
  434. system 00:09: [io  0xfe00-0xfefe] has been reserved
  435. system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
  436. system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
  437. system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
  438. system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  439. system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  440. system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
  441. system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  442. system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
  443. system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
  444. pci 0000:00:14.0: BAR 6: assigned [mem 0xf0000000-0xf00007ff pref]
  445. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  446. pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
  447. pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe7fffff]
  448. pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  449. pci 0000:00:14.4: PCI bridge to [bus 02-02]
  450. pci 0000:00:14.4:   bridge window [io  disabled]
  451. pci 0000:00:14.4:   bridge window [mem disabled]
  452. pci 0000:00:14.4:   bridge window [mem pref disabled]
  453. pci 0000:00:15.0: PCI bridge to [bus 03-03]
  454. pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
  455. pci 0000:00:15.0:   bridge window [mem 0xfe800000-0xfe8fffff]
  456. pci 0000:00:15.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
  457. pci 0000:00:15.1: PCI bridge to [bus 04-04]
  458. pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
  459. pci 0000:00:15.1:   bridge window [mem 0xfe900000-0xfe9fffff]
  460. pci 0000:00:15.1:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
  461.   alloc irq_desc for 17 on node 0
  462.   alloc kstat_irqs on node 0
  463. pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  464. pci 0000:00:15.0: setting latency timer to 64
  465. pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  466. pci 0000:00:15.1: setting latency timer to 64
  467. pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  468. pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  469. pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  470. pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  471. pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
  472. pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
  473. pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
  474. pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
  475. pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  476. pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
  477. pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
  478. pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
  479. pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
  480. pci_bus 0000:02: resource 8 [mem 0xd0000000-0xdfffffff]
  481. pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
  482. pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
  483. pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
  484. pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
  485. pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
  486. pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
  487. pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
  488. NET: Registered protocol family 2
  489. IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
  490. TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  491. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  492. TCP: Hash tables configured (established 524288 bind 65536)
  493. TCP reno registered
  494. UDP hash table entries: 2048 (order: 4, 65536 bytes)
  495. UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  496. NET: Registered protocol family 1
  497. pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
  498. pci 0000:01:05.0: Boot video device
  499. PCI: CLS 64 bytes, default 64
  500. Trying to unpack rootfs image as initramfs...
  501. Freeing initrd memory: 14536k freed
  502. PCI-DMA: Disabling AGP.
  503. PCI-DMA: aperture base @ 20000000 size 65536 KB
  504. PCI-DMA: using GART IOMMU.
  505. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
  506. audit: initializing netlink socket (disabled)
  507. type=2000 audit(1279390709.775:1): initialized
  508. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  509. VFS: Disk quotas dquot_6.5.2
  510. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  511. msgmni has been set to 7412
  512. SELinux:  Registering netfilter hooks
  513. alg: No test for stdrng (krng)
  514. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  515. io scheduler noop registered
  516. io scheduler deadline registered
  517. io scheduler cfq registered (default)
  518. pcieport 0000:00:15.0: setting latency timer to 64
  519.   alloc irq_desc for 40 on node 0
  520.   alloc kstat_irqs on node 0
  521. pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
  522. pcieport 0000:00:15.1: setting latency timer to 64
  523.   alloc irq_desc for 41 on node 0
  524.   alloc kstat_irqs on node 0
  525. pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
  526. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  527. pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  528. acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  529. pci-stub: invalid id string ""
  530. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  531. ACPI: Power Button [PWRB]
  532. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  533. ACPI: Power Button [PWRF]
  534. ACPI: acpi_idle registered with cpuidle
  535. thermal LNXTHERM:01: registered as thermal_zone0
  536. ACPI: Thermal Zone [THRM] (30 C)
  537. Non-volatile memory driver v1.3
  538. Linux agpgart interface v0.103
  539. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  540. brd: module loaded
  541. loop: module loaded
  542. ahci 0000:00:11.0: version 3.0
  543.   alloc irq_desc for 19 on node 0
  544.   alloc kstat_irqs on node 0
  545. ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  546.   alloc irq_desc for 42 on node 0
  547.   alloc kstat_irqs on node 0
  548. ahci 0000:00:11.0: irq 42 for MSI/MSI-X
  549. ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  550. ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
  551. scsi0 : ahci
  552. scsi1 : ahci
  553. scsi2 : ahci
  554. scsi3 : ahci
  555. ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 42
  556. ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 42
  557. ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 42
  558. ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 42
  559. Fixed MDIO Bus: probed
  560. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  561. ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  562. ehci_hcd 0000:00:12.2: EHCI Host Controller
  563. ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  564. ehci_hcd 0000:00:12.2: debug port 1
  565. ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
  566. ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  567. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  568. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  569. usb usb1: Product: EHCI Host Controller
  570. usb usb1: Manufacturer: Linux 2.6.35-rc5-next-20100716 ehci_hcd
  571. usb usb1: SerialNumber: 0000:00:12.2
  572. hub 1-0:1.0: USB hub found
  573. hub 1-0:1.0: 5 ports detected
  574. ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  575. ehci_hcd 0000:00:13.2: EHCI Host Controller
  576. ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
  577. ehci_hcd 0000:00:13.2: debug port 1
  578. ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400
  579. ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  580. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  581. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  582. usb usb2: Product: EHCI Host Controller
  583. usb usb2: Manufacturer: Linux 2.6.35-rc5-next-20100716 ehci_hcd
  584. usb usb2: SerialNumber: 0000:00:13.2
  585. hub 2-0:1.0: USB hub found
  586. hub 2-0:1.0: 5 ports detected
  587. ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  588. ehci_hcd 0000:00:16.2: EHCI Host Controller
  589. ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
  590. ehci_hcd 0000:00:16.2: debug port 1
  591. ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000
  592. ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
  593. usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  594. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  595. usb usb3: Product: EHCI Host Controller
  596. usb usb3: Manufacturer: Linux 2.6.35-rc5-next-20100716 ehci_hcd
  597. usb usb3: SerialNumber: 0000:00:16.2
  598. hub 3-0:1.0: USB hub found
  599. hub 3-0:1.0: 4 ports detected
  600. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  601.   alloc irq_desc for 18 on node 0
  602.   alloc kstat_irqs on node 0
  603. ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  604. ohci_hcd 0000:00:12.0: OHCI Host Controller
  605. ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
  606. ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
  607. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  608. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  609. usb usb4: Product: OHCI Host Controller
  610. usb usb4: Manufacturer: Linux 2.6.35-rc5-next-20100716 ohci_hcd
  611. usb usb4: SerialNumber: 0000:00:12.0
  612. hub 4-0:1.0: USB hub found
  613. hub 4-0:1.0: 5 ports detected
  614. ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  615. ohci_hcd 0000:00:13.0: OHCI Host Controller
  616. ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
  617. ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
  618. usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  619. usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  620. usb usb5: Product: OHCI Host Controller
  621. usb usb5: Manufacturer: Linux 2.6.35-rc5-next-20100716 ohci_hcd
  622. usb usb5: SerialNumber: 0000:00:13.0
  623. hub 5-0:1.0: USB hub found
  624. hub 5-0:1.0: 5 ports detected
  625. ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  626. ohci_hcd 0000:00:14.5: OHCI Host Controller
  627. ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
  628. ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fc000
  629. usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  630. usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  631. usb usb6: Product: OHCI Host Controller
  632. usb usb6: Manufacturer: Linux 2.6.35-rc5-next-20100716 ohci_hcd
  633. usb usb6: SerialNumber: 0000:00:14.5
  634. hub 6-0:1.0: USB hub found
  635. hub 6-0:1.0: 2 ports detected
  636. ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  637. ohci_hcd 0000:00:16.0: OHCI Host Controller
  638. ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
  639. ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5f7000
  640. usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  641. usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  642. usb usb7: Product: OHCI Host Controller
  643. usb usb7: Manufacturer: Linux 2.6.35-rc5-next-20100716 ohci_hcd
  644. usb usb7: SerialNumber: 0000:00:16.0
  645. hub 7-0:1.0: USB hub found
  646. hub 7-0:1.0: 4 ports detected
  647. uhci_hcd: USB Universal Host Controller Interface driver
  648. PNP: No PS/2 controller found. Probing ports directly.
  649. serio: i8042 KBD port at 0x60,0x64 irq 1
  650. serio: i8042 AUX port at 0x60,0x64 irq 12
  651. mice: PS/2 mouse device common for all mice
  652. rtc_cmos 00:03: RTC can wake from S4
  653. rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  654. rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  655. device-mapper: uevent: version 1.0.3
  656. device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
  657. cpuidle: using governor ladder
  658. cpuidle: using governor menu
  659. usbcore: registered new interface driver hiddev
  660. usbcore: registered new interface driver usbhid
  661. usbhid: USB HID core driver
  662. nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  663. ip_tables: (C) 2000-2006 Netfilter Core Team
  664. TCP cubic registered
  665. Initializing XFRM netlink socket
  666. NET: Registered protocol family 17
  667. PM: Resume from disk failed.
  668. registered taskstats version 1
  669. IMA: No TPM chip found, activating TPM-bypass!
  670.   Magic number: 2:464:342
  671. rtc_cmos 00:03: setting system clock to 2010-07-17 18:18:31 UTC (1279390711)
  672. Initalizing network drop monitor service
  673. ata2: SATA link down (SStatus 0 SControl 300)
  674. usb 1-2: new high speed USB device using ehci_hcd and address 3
  675. ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  676. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  677. ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  678. ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
  679. ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  680. usb 1-2: New USB device found, idVendor=0424, idProduct=2504
  681. usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  682. hub 1-2:1.0: USB hub found
  683. hub 1-2:1.0: 2 ports detected
  684. ata4.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
  685. ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  686. ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
  687. ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  688. ata1.00: configured for UDMA/133
  689. scsi 0:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
  690. sd 0:0:0:0: Attached scsi generic sg0 type 0
  691. sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
  692. sd 0:0:0:0: [sda] Write Protect is off
  693. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  694. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  695.  sda:
  696. ata4.00: configured for UDMA/133
  697. ata3.00: configured for UDMA/133
  698.  sda1 sda2 sda3 sda4 <
  699. scsi 2:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
  700. sd 2:0:0:0: Attached scsi generic sg1 type 0
  701. sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  702. scsi 3:0:0:0: Direct-Access     ATA      ST3250820AS      3.AA PQ: 0 ANSI: 5
  703. sd 2:0:0:0: [sdb] Write Protect is off
  704. sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  705. sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  706. sd 3:0:0:0: Attached scsi generic sg2 type 0
  707. sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  708.  sdb:
  709. sd 3:0:0:0: [sdc] Write Protect is off
  710. sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  711. sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  712.  sdc: sda5 sda6 sda7 >
  713. sd 0:0:0:0: [sda] Attached SCSI disk
  714.  sdc1 sdc4
  715. sd 3:0:0:0: [sdc] Attached SCSI disk
  716.  sdb1
  717. sd 2:0:0:0: [sdb] Attached SCSI disk
  718. Freeing unused kernel memory: 740k freed
  719. Write protecting the kernel read-only data: 10240k
  720. Freeing unused kernel memory: 1828k freed
  721. Freeing unused kernel memory: 1936k freed
  722. dracut: dracut-005-3.fc13
  723. udev: starting version 151
  724. [drm] Initialized drm 1.1.0 20060810
  725. [drm] radeon defaulting to kernel modesetting.
  726. [drm] radeon kernel modesetting enabled.
  727. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  728. radeon 0000:01:05.0: setting latency timer to 64
  729. [drm] initializing kernel modesetting (RS880 0x1002:0x9714).
  730. [drm] register mmio base: 0xFE7F0000
  731. [drm] register mmio size: 65536
  732. ATOM BIOS: B43106
  733. [drm] Clocks initialized !
  734. radeon 0000:01:05.0: VRAM: 368M 0xC0000000 - 0xD6FFFFFF (368M used)
  735. radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
  736. [drm] Detected VRAM RAM=368M, BAR=256M
  737. [drm] RAM width 32bits DDR
  738. [TTM] Zone  kernel: Available graphics memory: 1899874 kiB.
  739. [TTM] Initializing pool allocator.
  740. [drm] radeon: 368M of VRAM memory ready
  741. [drm] radeon: 512M of GTT memory ready.
  742. [drm] radeon: irq initialized.
  743. [drm] GART: num cpu pages 131072, num gpu pages 131072
  744. [drm] Loading RS780 Microcode
  745. usb 4-1: new low speed USB device using ohci_hcd and address 2
  746. [drm] ring test succeeded in 1 usecs
  747. [drm] radeon: ib pool ready.
  748. [drm] ib test succeeded in 0 usecs
  749. [drm] Enabling audio support
  750. [drm] Unknown TV standard; defaulting to NTSC
  751. [drm] Radeon Display Connectors
  752. [drm] Connector 0:
  753. [drm]   VGA
  754. [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
  755. [drm]   Encoders:
  756. [drm]     CRT1: INTERNAL_KLDSCP_DAC1
  757. [drm] Connector 1:
  758. [drm]   HDMI-A
  759. [drm]   HPD3
  760. [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
  761. [drm]   Encoders:
  762. [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
  763. [drm] Connector 2:
  764. [drm]   DisplayPort
  765. [drm]   HPD1
  766. [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
  767. [drm]   Encoders:
  768. [drm]     DFP1: INTERNAL_UNIPHY
  769. [drm] radeon: power management initialized
  770. usb 4-1: New USB device found, idVendor=046d, idProduct=c01d
  771. usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  772. usb 4-1: Product: USB-PS/2 Optical Mouse
  773. usb 4-1: Manufacturer: Logitech
  774. input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2
  775. generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
  776. usb 3-2: new high speed USB device using ehci_hcd and address 3
  777. usb 3-2: New USB device found, idVendor=0bda, idProduct=0111
  778. usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  779. usb 3-2: Product: USB2.0-CRW
  780. usb 3-2: Manufacturer: Generic
  781. usb 3-2: SerialNumber: 20021111153705700
  782. Initializing USB Mass Storage driver...
  783. scsi4 : usb-storage 3-2:1.0
  784. usbcore: registered new interface driver usb-storage
  785. USB Mass Storage support registered.
  786. [drm] fb mappable at 0xD0141000
  787. [drm] vram apper at 0xD0000000
  788. [drm] size 9216000
  789. [drm] fb depth is 24
  790. [drm]    pitch is 7680
  791. fbcon: radeondrmfb (fb0) is primary device
  792. usb 7-1: new low speed USB device using ohci_hcd and address 2
  793. usb 7-1: New USB device found, idVendor=147a, idProduct=e00d
  794. usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  795. usb 7-1: Product: IR  Receiver
  796. usb 7-1: Manufacturer: Acer
  797. input: Acer IR  Receiver as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input3
  798. generic-usb 0003:147A:E00D.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Acer IR  Receiver] on usb-0000:00:16.0-1/input0
  799. usb 1-2.2: new low speed USB device using ehci_hcd and address 4
  800. usb 1-2.2: New USB device found, idVendor=046d, idProduct=c30f
  801. usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  802. usb 1-2.2: Product: Logitech USB Keyboard
  803. usb 1-2.2: Manufacturer: Logitech
  804. input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input4
  805. generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.2-2.2/input0
  806. input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input5
  807. generic-usb 0003:046D:C30F.0004: input,hidraw3: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.2-2.2/input1
  808. Console: switching to colour frame buffer device 240x75
  809. fb0: radeondrmfb frame buffer device
  810. drm: registered panic notifier
  811. Slow work thread pool: Starting up
  812. Slow work thread pool: Ready
  813. [drm] Initialized radeon 2.6.0 20080528 for 0000:01:05.0 on minor 0
  814. scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
  815. dracut: Starting plymouth daemon
  816. scsi 4:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
  817. scsi 4:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
  818. scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
  819. sd 4:0:0:0: Attached scsi generic sg3 type 0
  820. sd 4:0:0:1: Attached scsi generic sg4 type 0
  821. sd 4:0:0:2: Attached scsi generic sg5 type 0
  822. sd 4:0:0:3: Attached scsi generic sg6 type 0
  823. sd 4:0:0:0: [sdd] Attached SCSI removable disk
  824. sd 4:0:0:1: [sde] Attached SCSI removable disk
  825. sd 4:0:0:2: [sdf] Attached SCSI removable disk
  826. sd 4:0:0:3: [sdg] Attached SCSI removable disk
  827. pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  828. pata_atiixp 0000:00:14.1: setting latency timer to 64
  829. scsi5 : pata_atiixp
  830. scsi6 : pata_atiixp
  831. ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
  832. ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
  833. ata5.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.09, max UDMA/66
  834. ata5.00: limited to UDMA/33 due to 40-wire cable
  835. ata5.00: configured for UDMA/33
  836. scsi 5:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.09 PQ: 0 ANSI: 5
  837. sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  838. cdrom: Uniform CD-ROM driver Revision: 3.20
  839. sr 5:0:0:0: Attached scsi CD-ROM sr0
  840. sr 5:0:0:0: Attached scsi generic sg7 type 5
  841. EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  842. dracut: Remounting /dev/disk/by-uuid/09fa5fcc-4a87-4d2a-bdf2-a0a5cc837bff with -o noatime,ro
  843. EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  844. dracut: Mounted root filesystem /dev/sda2
  845. dracut: Loading SELinux policy
  846. SELinux: 2048 avtab hash slots, 196917 rules.
  847. SELinux: 2048 avtab hash slots, 196917 rules.
  848. SELinux:  9 users, 13 roles, 3276 types, 160 bools, 1 sens, 1024 cats
  849. SELinux:  77 classes, 196917 rules
  850. SELinux:  Completing initialization.
  851. SELinux:  Setting up existing superblocks.
  852. SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  853. SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  854. SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
  855. SELinux: initialized (dev proc, type proc), uses genfs_contexts
  856. SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  857. SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  858. SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  859. SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  860. SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  861. SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
  862. SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  863. SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  864. SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
  865. SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  866. SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
  867. SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
  868. SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  869. SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  870. SELinux: initialized (dev sda2, type ext4), uses xattr
  871. type=1403 audit(1279390714.806:2): policy loaded auid=4294967295 ses=4294967295
  872. dracut: Switching root
  873. readahead-collector: starting
  874. udev: starting version 151
  875. microcode: CPU0: patch_level=0x10000bf
  876. microcode: CPU1: patch_level=0x10000bf
  877. microcode: CPU2: patch_level=0x10000bf
  878. microcode: CPU3: patch_level=0x10000bf
  879. microcode: CPU4: patch_level=0x10000bf
  880. microcode: CPU5: patch_level=0x10000bf
  881. microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  882. input: PC Speaker as /devices/platform/pcspkr/input/input6
  883. microcode: AMD microcode update via /dev/cpu/microcode not supported
  884. microcode: AMD microcode update via /dev/cpu/microcode not supported
  885. microcode: AMD microcode update via /dev/cpu/microcode not supported
  886. microcode: AMD microcode update via /dev/cpu/microcode not supported
  887. microcode: AMD microcode update via /dev/cpu/microcode not supported
  888. microcode: AMD microcode update via /dev/cpu/microcode not supported
  889. microcode: AMD microcode update via /dev/cpu/microcode not supported
  890. microcode: AMD microcode update via /dev/cpu/microcode not supported
  891. microcode: AMD microcode update via /dev/cpu/microcode not supported
  892. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  893. piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  894. EDAC MC: Ver: 2.1.0 Jul 17 2010
  895. EDAC amd64_edac:  Ver: 3.3.0 Jul 17 2010
  896. EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
  897. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  898.  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  899.  (Note that use of the override may cause unknown side effects.)
  900. amd64_edac: probe of 0000:00:18.2 failed with error -22
  901. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  902.   alloc irq_desc for 16 on node 0
  903.   alloc kstat_irqs on node 0
  904. r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  905. r8169 0000:03:00.0: setting latency timer to 64
  906.   alloc irq_desc for 43 on node 0
  907.   alloc kstat_irqs on node 0
  908. r8169 0000:03:00.0: irq 43 for MSI/MSI-X
  909. r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90012ba8000, 44:87:fc:5e:4c:15, XID 081000c0 IRQ 43
  910. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  911. r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  912. r8169 0000:04:00.0: setting latency timer to 64
  913.   alloc irq_desc for 44 on node 0
  914.   alloc kstat_irqs on node 0
  915. r8169 0000:04:00.0: irq 44 for MSI/MSI-X
  916. r8169 0000:04:00.0: eth1: RTL8168d/8111d at 0xffffc900110ae000, 44:87:fc:7a:b9:56, XID 081000c0 IRQ 44
  917. udev: renamed network interface eth0 to eth3
  918. udev: renamed network interface eth1 to eth4
  919. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  920. ALSA sound/pci/hda/patch_realtek.c:1350: SKU: Nid=0x1d sku_cfg=0x4005e601
  921. ALSA sound/pci/hda/patch_realtek.c:1352: SKU: port_connectivity=0x1
  922. ALSA sound/pci/hda/patch_realtek.c:1353: SKU: enable_pcbeep=0x0
  923. ALSA sound/pci/hda/patch_realtek.c:1354: SKU: check_sum=0x00000005
  924. ALSA sound/pci/hda/patch_realtek.c:1355: SKU: customization=0x000000e6
  925. ALSA sound/pci/hda/patch_realtek.c:1356: SKU: external_amp=0x0
  926. ALSA sound/pci/hda/patch_realtek.c:1357: SKU: platform_type=0x0
  927. ALSA sound/pci/hda/patch_realtek.c:1358: SKU: swap=0x0
  928. ALSA sound/pci/hda/patch_realtek.c:1359: SKU: override=0x1
  929. hda_codec: ALC892: BIOS auto-probing.
  930. ALSA sound/pci/hda/hda_codec.c:4445: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0)
  931. ALSA sound/pci/hda/hda_codec.c:4449:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  932. ALSA sound/pci/hda/hda_codec.c:4453:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  933. ALSA sound/pci/hda/hda_codec.c:4454:    mono: mono_out=0x0
  934. ALSA sound/pci/hda/hda_codec.c:4457:    dig-out=0x11/0x1e
  935. ALSA sound/pci/hda/hda_codec.c:4465:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
  936. ALSA sound/pci/hda/patch_realtek.c:1400: realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
  937. ALSA sound/pci/hda/patch_realtek.c:1416: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
  938. ALSA sound/pci/hda/hda_codec.c:407: Too many connections
  939. HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  940. HDA Intel 0000:01:05.1: setting latency timer to 64
  941. EXT4-fs (sda2): re-mounted. Opts: (null)
  942. EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  943. SELinux: initialized (dev sda1, type ext4), uses xattr
  944. EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  945. SELinux: initialized (dev sda7, type ext4), uses xattr
  946. EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  947. SELinux: initialized (dev sda5, type ext4), uses xattr
  948. EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  949. SELinux: initialized (dev sda3, type ext4), uses xattr
  950. EXT3-fs: barriers not enabled
  951. kjournald starting.  Commit interval 5 seconds
  952. EXT3-fs (sdc4): warning: maximal mount count reached, running e2fsck is recommended
  953. EXT3-fs (sdc4): using internal journal
  954. EXT3-fs (sdc4): mounted filesystem with ordered data mode
  955. SELinux: initialized (dev sdc4, type ext3), uses xattr
  956. Adding 1048568k swap on /dev/sda6.  Priority:-1 extents:1 across:1048568k
  957. SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
  958. powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
  959. powernow-k8: Core Performance Boosting: on.
  960. powernow-k8:    0 : pstate 0 (3200 MHz)
  961. powernow-k8:    1 : pstate 1 (2400 MHz)
  962. powernow-k8:    2 : pstate 2 (1600 MHz)
  963. powernow-k8:    3 : pstate 3 (800 MHz)
  964. NET: Registered protocol family 10
  965. lo: Disabled Privacy Extensions
  966. r8169 0000:03:00.0: eth3: link down
  967. ADDRCONF(NETDEV_UP): eth3: link is not ready
  968. r8169 0000:04:00.0: eth4: link up
  969. r8169 0000:04:00.0: eth4: link up
  970. RPC: Registered udp transport module.
  971. RPC: Registered tcp transport module.
  972. RPC: Registered tcp NFSv4.1 backchannel transport module.
  973. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
  974. NET: Registered protocol family 15
  975. padlock: VIA PadLock not detected.
  976. padlock: VIA PadLock Hash Engine not detected.
  977. Intel AES-NI instructions are not detected.
  978. padlock: VIA PadLock not detected.
  979. alg: No test for cipher_null (cipher_null-generic)
  980. alg: No test for ecb(cipher_null) (ecb-cipher_null)
  981. alg: No test for digest_null (digest_null-generic)
  982. alg: No test for compress_null (compress_null-generic)
  983. eth4: no IPv6 routers present
  984. hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
  985. readahead-collector: sorting
  986. readahead-collector: finished
  987. fuse init (API version 7.15)
  988. SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  989. ISO 9660 Extensions: Microsoft Joliet Level 3
  990. ISO 9660 Extensions: RRIP_1991A
  991. SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
clone this paste RAW Paste Data