API tools faq
paste
Guest User

pcduino-13012015

a guest
Jan 12th, 2015
303
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.93 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.01.13 03:11:38 =~=~=~=~=~=~=~=~=~=~=~=
  2. HELLO! BOOT0 is starting!
  3. boot0 version : 2.0.0˜
  4. read dram para.
  5. dram driver version: 1.15
  6. dram size =1024MB
  7. 0xffffffff
  8. super_standby_flag = 0
  9. Succeed in opening nand flash.
  10. block from 2 to 6
  11. deal block 2
  12. Succeed in reading Boot1 file head.
  13. The size of Boot1 is 0x0006c000.
  14. The file stored in 0x00000000 of block 2 is perfect.
  15. Check is correct.
  16. Ready to disable icache.
  17. Succeed in loading Boot1.
  18. Jump to Boot1.
  19. [ 0.147] boot1 version : 2.0.0
  20. [ 0.147] DEBUG:L350(start/eGon2_start.c):total boot1 file length = 442368
  21.  
  22. [ 0.151] DEBUG:L351(start/eGon2_start.c):boot1 length = 376832
  23.  
  24. [ 0.157] DEBUG:L352(start/eGon2_start.c):script start addr = 0x4245c000, size = 65536
  25.  
  26. [ 0.166] DEBUG:L354(start/eGon2_start.c):script dest buffer = 0x43000000
  27.  
  28. [ 0.173] DEBUG:L356(start/eGon2_start.c):size=65536
  29.  
  30. [ 0.179] script installed early ok
  31. [ 0.182] pmu type = 3
  32. [ 0.286] bat vol = 0 mv
  33. [ 0.286] DEBUG:L274(standby/power_ops.c):core_para->vol_threshold =0
  34.  
  35. [ 0.289] DEBUG:L275(standby/power_ops.c):core_para->user_set_core_vol =1400
  36.  
  37. [ 0.297] DEBUG:L276(standby/power_ops.c):core_para->user_set_clock =912
  38.  
  39. [ 0.304] DEBUG:L334(standby/power_ops.c):no baterry ratio flag,dcin_exist,set BATTERY_RATIO_ENOUGH
  40.  
  41. [ 0.313] DEBUG:L354(standby/power_ops.c):after set,power_step_level=3
  42.  
  43. [ 0.333] axi:ahb:apb=4:2:2
  44. [ 0.333] set dcdc2=1400mv, clock=912M successed
  45. [ 0.335] key
  46. [ 0.348] no key found
  47. [ 0.348] flash init start
  48. [ 0.348] NB1 : enter NFB_Init
  49.  
  50. [ 0.351] NB1 : enter phy init
  51.  
  52. [ 0.354] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
  53.  
  54. [ 0.362] get the good blk ratio from hwscan : 840
  55.  
  56. [ 0.367] NB1 : nand phy init ok
  57.  
  58. [ 1.051] _RepairLogBlkTbl start
  59.  
  60. [ 1.053] Log Block Index 0x00000000, LogicBlockNum: 0x00000219, LogBlockType: 0x00000000
  61.  
  62. [ 1.057] log0: 0x00000321, Log1: 0x0000ffff, WriteIndex: 0x00000000
  63.  
  64. [ 1.064] datablock: 0x00000322, lastusedpage: 0x00000001
  65.  
  66. [ 1.071] Log Block Index 0x00000001, LogicBlockNum: 0x00000218, LogBlockType: 0x00000000
  67.  
  68. [ 1.078] log0: 0x00000327, Log1: 0x0000ffff, WriteIndex: 0x00000000
  69.  
  70. [ 1.084] datablock: 0x00000328, lastusedpage: 0x00000000
  71.  
  72. [ 1.092] Log Block Index 0x00000002, LogicBlockNum: 0x00000217, LogBlockType: 0x00000000
  73.  
  74. [ 1.098] log0: 0x0000032b, Log1: 0x0000ffff, WriteIndex: 0x00000000
  75.  
  76. [ 1.105] datablock: 0x0000032c, lastusedpage: 0x00000001
  77.  
  78. [ 1.113] Log Block Index 0x00000003, LogicBlockNum: 0x0000001b, LogBlockType: 0x00000000
  79.  
  80. [ 1.119] log0: 0x0000031f, Log1: 0x0000ffff, WriteIndex: 0x00000000
  81.  
  82. [ 1.125] datablock: 0x00000332, lastusedpage: 0x00000005
  83.  
  84. [ 1.133] Log Block Index 0x00000004, LogicBlockNum: 0x00000216, LogBlockType: 0x00000000
  85.  
  86. [ 1.139] log0: 0x00000333, Log1: 0x0000ffff, WriteIndex: 0x00000000
  87.  
  88. [ 1.146] datablock: 0x00000336, lastusedpage: 0x00000000
  89.  
  90. [ 1.154] Log Block Index 0x00000005, LogicBlockNum: 0x00000014, LogBlockType: 0x00000000
  91.  
  92. [ 1.160] log0: 0x00000334, Log1: 0x0000ffff, WriteIndex: 0x00000000
  93.  
  94. [ 1.167] datablock: 0x00000345, lastusedpage: 0x00000042
  95.  
  96. [ 1.174] Log Block Index 0x00000006, LogicBlockNum: 0x000000d4, LogBlockType: 0x00000000
  97.  
  98. [ 1.181] log0: 0x00000346, Log1: 0x0000ffff, WriteIndex: 0x00000000
  99.  
  100. [ 1.187] datablock: 0x00000347, lastusedpage: 0x000000eb
  101.  
  102. [ 1.195] Log Block Index 0x00000007, LogicBlockNum: 0x00000037, LogBlockType: 0x00000000
  103.  
  104. [ 1.201] log0: 0x00000341, Log1: 0x0000ffff, WriteIndex: 0x00000000
  105.  
  106. [ 1.208] datablock: 0x00000349, lastusedpage: 0x0000001f
  107.  
  108. [ 1.215] Log Block Index 0x00000008, LogicBlockNum: 0x00000173, LogBlockType: 0x00000000
  109.  
  110. [ 1.222] log0: 0x0000034d, Log1: 0x0000ffff, WriteIndex: 0x00000000
  111.  
  112. [ 1.229] datablock: 0x0000017a, lastusedpage: 0x00000035
  113.  
  114. [ 1.237] Log Block Index 0x00000009, LogicBlockNum: 0x00000018, LogBlockType: 0x00000000
  115.  
  116. [ 1.243] log0: 0x0000034a, Log1: 0x0000ffff, WriteIndex: 0x00000000
  117.  
  118. [ 1.249] datablock: 0x0000034f, lastusedpage: 0x00000008
  119.  
  120. [ 1.257] Log Block Index 0x0000000a, LogicBlockNum: 0x0000018e, LogBlockType: 0x00000000
  121.  
  122. [ 1.263] log0: 0x00000398, Log1: 0x0000ffff, WriteIndex: 0x00000000
  123.  
  124. [ 1.270] datablock: 0x00000195, lastusedpage: 0x00000022
  125.  
  126. [ 1.278] Log Block Index 0x0000000b, LogicBlockNum: 0x00000036, LogBlockType: 0x00000000
  127.  
  128. [ 1.284] log0: 0x000003d6, Log1: 0x0000ffff, WriteIndex: 0x00000000
  129.  
  130. [ 1.290] datablock: 0x00000323, lastusedpage: 0x0000000f
  131.  
  132. [ 1.298] Log Block Index 0x0000000c, LogicBlockNum: 0x00000020, LogBlockType: 0x00000000
  133.  
  134. [ 1.304] log0: 0x0000034e, Log1: 0x0000ffff, WriteIndex: 0x00000000
  135.  
  136. [ 1.311] datablock: 0x000003ec, lastusedpage: 0x00000053
  137.  
  138. [ 1.319] Log Block Index 0x0000000d, LogicBlockNum: 0x0000021a, LogBlockType: 0x00000000
  139.  
  140. [ 1.325] log0: 0x00000324, Log1: 0x0000ffff, WriteIndex: 0x00000000
  141.  
  142. [ 1.332] datablock: 0x000003ed, lastusedpage: 0x00000048
  143.  
  144. [ 1.339] Log Block Index 0x0000000e, LogicBlockNum: 0x0000001a, LogBlockType: 0x00000000
  145.  
  146. [ 1.346] log0: 0x00000344, Log1: 0x0000ffff, WriteIndex: 0x00000000
  147.  
  148. [ 1.352] datablock: 0x000003f2, lastusedpage: 0x00000022
  149.  
  150. [ 1.360] Log Block Index 0x0000000f, LogicBlockNum: 0x0000018d, LogBlockType: 0x00000000
  151.  
  152. [ 1.366] log0: 0x000003f8, Log1: 0x0000ffff, WriteIndex: 0x00000000
  153.  
  154. [ 1.373] datablock: 0x0000032e, lastusedpage: 0x0000000f
  155.  
  156. [ 1.379] _RepairLogBlkTbl end
  157.  
  158. [ 1.392] NB1 : init ok
  159.  
  160. [ 1.392] flash init finish
  161. [ 1.393] fs init ok
  162. [ 1.395] fattype FAT16
  163. [ 1.397] fs mount ok
  164. [ 1.401] DEBUG:L376(start/eGon2_start.c):dram_para_set start
  165.  
  166. [ 1.405] DEBUG:L397(start/eGon2_start.c):dram_para_set end
  167.  
  168. [ 1.411] nand good_block_ratio=840
  169. [ 1.415] storage_type=0
  170. [ 1.425] 0
  171.  
  172. [ 1.453] video_config, vic:19
  173.  
  174. [ 1.453] HDMI RGB444 output mode
  175.  
  176. [ 1.460] video_config, vic:19
  177.  
  178. [ 1.460] HDMI RGB444 output mode
  179.  
  180. [ 1.467] video_config, vic:19
  181.  
  182. [ 1.467] HDMI RGB444 output mode
  183.  
  184. [ 1.468] boot_disp.output_type=3
  185.  
  186. [ 1.471] boot_disp.output_mode=5
  187.  
  188. [ 1.475] WRN:L291(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail
  189.  
  190. [ 1.485] hdmi open
  191.  
  192. [ 1.487] DRV_hdmi_set_display_mode,mode:5
  193.  
  194. [ 1.492] DRV_hdmi_open
  195.  
  196. [ 1.500] video_config, vic:4
  197.  
  198. [ 1.500] HDMI RGB444 output mode
  199.  
  200. [ 1.509] video_config, vic:4
  201.  
  202. [ 1.509] HDMI RGB444 output mode
  203.  
  204. [ 1.518] video_config, vic:4
  205.  
  206. [ 1.518] HDMI RGB444 output mode
  207.  
  208. [ 1.521] key value = 0
  209.  
  210. [ 1.521] recovery key high 6, low 4
  211.  
  212. [ 1.725] show pic finish
  213.  
  214. [ 1.725] load kernel start
  215.  
  216. [ 1.742] load kernel successed
  217.  
  218. [ 1
  219.  
  220.  
  221. U-Boot 2011.09-rc1 (Jul 03 2013 - 17:40:47) Allwinner Technology
  222.  
  223. CPU: SUNXI Family
  224. Board: SUN7I-EVB
  225. DRAM: 1 GiB
  226. NAND: [NAND] set nand_good_block_ratio 840
  227. 3360 MiB
  228. In: serial
  229. Out: serial
  230. Err: serial
  231. --------fastboot partitions--------
  232. -total partitions:5-
  233. -name- -start- -size-
  234. bootloader : 8000 10000
  235. env : 18000 8000
  236. boot : 20000 8000
  237. linaro : 28000 740000
  238. UDISK : 768000 728000
  239. -----------------------------------
  240. no misc partition is found
  241. Hit any key to stop autoboot: 1  0
  242. reading script.bin
  243.  
  244. 50660 bytes read
  245. reading uImage
  246.  
  247. 5013760 bytes read
  248. ## Booting kernel from Legacy Image at 48000000 ...
  249. Image Name: Linux-3.4.79+
  250. Image Type: ARM Linux Kernel Image (uncompressed)
  251. Data Size: 5013696 Bytes = 4.8 MiB
  252. Load Address: 40008000
  253. Entry Point: 40008000
  254. Verifying Checksum ... OK
  255. Loading Kernel Image ... OK
  256. OK
  257.  
  258. Starting kernel ...
  259.  
  260. [ 0.000000] Booting Linux on physical CPU 0
  261. [ 0.000000] Initializing cgroup subsys cpuset
  262. [ 0.000000] Linux version 3.4.79+ (root@ubuntu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Thu Dec 25 05:47:38 PST 2014
  263. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  264. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  265. [ 0.000000] Machine: sun7i
  266. [ 0.000000] Memory Reserved:
  267. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  268. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  269. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  270. [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  271. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  272. [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  273. [ 0.000000] On node 0 totalpages: 262144
  274. [ 0.000000] free_area_init_node: node 0, pgdat c097cb00, node_mem_map d0000000
  275. [ 0.000000] DMA zone: 512 pages used for memmap
  276. [ 0.000000] DMA zone: 0 pages reserved
  277. [ 0.000000] DMA zone: 65024 pages, LIFO batch:15
  278. [ 0.000000] Normal zone: 1008 pages used for memmap
  279. [ 0.000000] Normal zone: 128016 pages, LIFO batch:31
  280. [ 0.000000] HighMem zone: 528 pages used for memmap
  281. [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
  282. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s6656 r8192 d13824 u32768
  283. [ 0.000000] pcpu-alloc: s6656 r8192 d13824 u32768 alloc=8*4096
  284. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  285. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  286. [ 0.000000] Kernel command line: coherent_pool=2M console=ttyS0,115200 console=tty1 root=/dev/nandd init=/sbin/init loglevel=8 partitions=bootloader@nanda:env@nandb:boot@nandc:linaro@nandd:UDISK@nande
  287. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  288. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  289. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  290. [ 0.000000] Memory: 1024MB = 1024MB total
  291. [ 0.000000] Memory: 896752k/896752k available, 151824k reserved, 270336K highmem
  292. [ 0.000000] Virtual kernel memory layout:
  293. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  294. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  295. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  296. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  297. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  298. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  299. [ 0.000000] .text : 0xc0008000 - 0xc08cb5a8 (8974 kB)
  300. [ 0.000000] .init : 0xc08cc000 - 0xc08fca00 ( 195 kB)
  301. [ 0.000000] .data : 0xc08fe000 - 0xc0988d98 ( 556 kB)
  302. [ 0.000000] .bss : 0xc0988dbc - 0xc0b54908 (1839 kB)
  303. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  304. [ 0.000000] Preemptible hierarchical RCU implementation.
  305. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  306. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  307. [ 0.000000] NR_IRQS:192
  308. [ 0.000000] Architected local timer running at 24.00MHz.
  309. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  310. [ 0.000000] start_kernel(): bug: interrupts were enabled early
  311. [ 0.000000] Console: colour dummy device 80x30
  312. [ 0.000000] console [tty1] enabled
  313. [ 0.000774] Calibrating delay loop... 1810.43 BogoMIPS (lpj=9052160)
  314. [ 0.059965] pid_max: default: 32768 minimum: 301
  315. [ 0.060191] Mount-cache hash table entries: 512
  316. [ 0.061089] Initializing cgroup subsys cpuacct
  317. [ 0.061129] Initializing cgroup subsys devices
  318. [ 0.061153] Initializing cgroup subsys freezer
  319. [ 0.061172] Initializing cgroup subsys blkio
  320. [ 0.061277] CPU: Testing write buffer coherency: ok
  321. [ 0.061532] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  322. [ 0.061601] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  323. [ 0.061687] Setting up static identity map for 0x40607e28 - 0x40607e5c
  324. [ 0.174627] CPU1: Booted secondary processor
  325. [ 0.231874] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  326. [ 0.231961] Brought up 2 CPUs
  327. [ 0.232018] SMP: Total of 2 processors activated (3633.97 BogoMIPS).
  328. [ 0.232958] devtmpfs: initialized
  329. [ 0.237676] dummy:
  330. [ 0.237960] NET: Registered protocol family 16
  331. [ 0.239852] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  332. [ 0.240569] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  333. [ 0.240612] hw-breakpoint: maximum watchpoint size is 8 bytes.
  334. [ 0.240651] [ccu-inf] aw clock manager init
  335. [ 0.240671] [ccu-inf] aw_ccu_init
  336. [ 0.240912] [ccu-inf] script config pll3 to 297MHz
  337. [ 0.240943] [ccu-inf] script config pll4 to 300MHz
  338. [ 0.240968] [ccu-inf] script config pll6 to 600MHz
  339. [ 0.240992] [ccu-inf] script config pll7 to 297MHz
  340. [ 0.241018] [ccu-inf] script config pll8 to 336MHz
  341. [ 0.241180] Init eGon pin module V2.0
  342. [ 0.251009] bio: create slab <bio-0> at 0
  343. [ 0.251632] sunxi disp driver loaded (/dev/disp api 1.0)
  344. [ 0.252121] SCSI subsystem initialized
  345. [ 0.252356] libata version 3.00 loaded.
  346. [ 0.252621] usbcore: registered new interface driver usbfs
  347. [ 0.252738] usbcore: registered new interface driver hub
  348. [ 0.252884] usbcore: registered new device driver usb
  349. [ 0.253031] Linux media interface: v0.10
  350. [ 0.253088] Linux video capture interface: v2.00
  351. [ 0.253372] Advanced Linux Sound Architecture Driver Version 1.0.25.
  352. [ 0.253908] Bluetooth: Core ver 2.16
  353. [ 0.253985] NET: Registered protocol family 31
  354. [ 0.254007] Bluetooth: HCI device and connection manager initialized
  355. [ 0.254036] Bluetooth: HCI socket layer initialized
  356. [ 0.254058] Bluetooth: L2CAP socket layer initialized
  357. [ 0.254097] Bluetooth: SCO socket layer initialized
  358. [ 0.254559] Switching to clocksource arch_sys_counter
  359. [ 0.254874] FS-Cache: Loaded
  360. [ 0.255046] CacheFiles: Loaded
  361. [ 0.262864] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_DEVICE_ONLY
  362. [ 0.263010] [sw_hcd0]: usb host driver initialize........
  363. [ 0.263314] [mmc-msg] sw_mci_init
  364. [ 0.263401] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  365. [ 0.263636] [mmc-msg] sdc0 set round clock 400000, src 24000000
  366. [ 0.263891] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  367. [ 0.265145] [mmc-msg] sdc0 Probe: base:0xf0212000 irq:64 sg_cpu:f0214000(4fc00000) ret 0.
  368. [ 0.265456] NET: Registered protocol family 2
  369. [ 0.265725] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  370. [ 0.266312] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  371. [ 0.268303] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  372. [ 0.269369] TCP: Hash tables configured (established 131072 bind 65536)
  373. [ 0.269395] TCP: reno registered
  374. [ 0.269419] UDP hash table entries: 512 (order: 2, 16384 bytes)
  375. [ 0.269471] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  376. [ 0.269809] NET: Registered protocol family 1
  377. [ 0.270337] RPC: Registered named UNIX socket transport module.
  378. [ 0.270371] RPC: Registered udp transport module.
  379. [ 0.270392] RPC: Registered tcp transport module.
  380. [ 0.270411] RPC: Registered tcp NFSv4.1 backchannel transport module.
  381. [ 0.271287] audit: initializing netlink socket (disabled)
  382. [ 0.271360] type=2000 audit(0.250:1): initialized
  383. [ 0.272365] highmem bounce pool size: 64 pages
  384. [ 0.281405] VFS: Disk quotas dquot_6.5.2
  385. [ 0.281714] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  386. [ 0.284276] NFS: Registering the id_resolver key type
  387. [ 0.285667] NTFS driver 2.1.30 [Flags: R/W].
  388. [ 0.286080] fuse init (API version 7.18)
  389. [ 0.286687] msgmni has been set to 1223
  390. [ 0.290894] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  391. [ 0.291065] alg: No test for stdrng (krng)
  392. [ 0.291449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  393. [ 0.291502] io scheduler noop registered
  394. [ 0.291523] io scheduler deadline registered
  395. [ 0.291570] io scheduler cfq registered (default)
  396. [ 0.291977] I2C: i2c-10: HDMI I2C adapter
  397. [ 0.314842] disp clks: lcd 25200000 pre_scale 1 hdmi 25200000 pll 252000000 2x 0
  398. [ 1.583655] Console: switching to colour frame buffer device 80x30
  399. [ 1.638309] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  400. [ 1.642326] [uart]: used uart info.: 0x05
  401. [ 1.645267] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  402. [ 1.648682] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  403. [ 2.425659] console [ttyS0] enabled
  404. [ 2.432259] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  405. [ 2.441402] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  406. [ 2.452049] G2D: drv_g2d_init
  407. [ 2.457970] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  408. [ 2.466674] G2D: head:c9000000,tail:ca000000
  409. [ 2.473877] G2D: Module initialized.major:248
  410. [ 2.482107] brd: module loaded
  411. [ 2.491264] loop: module loaded
  412. [ 2.497304] [NAND] nand driver version: 0x2 0x9
  413. [ 2.559272] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
  414. [ 3.880810] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
  415. [ 3.890818] Dev Sunxi softw311 nand magic does not match for MBR 2:
  416. [ 3.900629] Dev Sunxi softw311 nand magic does not match for MBR 3:
  417. [ 3.910354] Dev Sunxi softw311 nand magic does not match for MBR 4:
  418. [ 3.920054] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  419. [ 3.942927] Dev Sunxi softw411 nand: part 1, start 32768, size 65536
  420. [ 3.952093] Dev Sunxi softw411 nand: part 2, start 98304, size 32768
  421. [ 3.961061] Dev Sunxi softw411 nand: part 3, start 131072, size 32768
  422. [ 3.970040] Dev Sunxi softw411 nand: part 4, start 163840, size 7602176
  423. [ 3.979106] Dev Sunxi softw411 nand: part 5, start 7766016, size -245760
  424. [ 3.988181] nand: nanda nandb nandc nandd nande
  425. [ 3.995723] nand: p4 size 7602176 extends beyond EOD, truncated
  426. [ 4.004222] nand: p5 start 7766016 is beyond EOD, truncated
  427. [ 4.012586] [NAND]nand driver, ok.
  428. [ 4.018794] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  429. [ 4.028175] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  430. [ 4.035848] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  431. [ 4.048912] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  432. [ 4.061942] scsi0 : sw_ahci_platform
  433. [ 4.068360] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  434. [ 4.081579] [spi]: sw spi init !!
  435. [ 4.087459] [spi]: Found 2 spi devices in config files
  436. [ 4.095203] [spi]: boards num modalias max_spd_hz bus_num cs mode
  437. [ 4.108195] [spi]: spi_board0 irq gpio not used
  438. [ 4.115540] [spi]: 0 spidev 12000000 0 0 0x3
  439. [ 4.128648] [spi]: spi_board1 irq gpio not used
  440. [ 4.135924] [spi]: 1 spidev 12000000 2 0 0x0
  441. [ 4.149419] [spi]: bus num = 0, spi used = 1
  442. [ 4.156898] [spi]: source = sdram_pll_p, src_clk = 408000000, mclk 81600000
  443. [ 4.166914] sun7i-spi sun7i-spi.0: master is unqueued, this is deprecated
  444. [ 4.176670] spi_sunxi_setup 1315
  445. [ 4.182770] spi_sunxi_setup 1352
  446. [ 4.189032] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-0 with 2 Slaves attached
  447. [ 4.202798] [spi]: [spi-0]: driver probe succeed, base f02ea000, irq 42, dma_tx_id 27, dma_rx_id 26!
  448. [ 4.217852] [spi]: bus num = 2, spi used = 1
  449. [ 4.225285] [spi]: source = sdram_pll_p, src_clk = 408000000, mclk 81600000
  450. [ 4.240281] sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
  451. [ 4.250065] spi_sunxi_setup 1315
  452. [ 4.256167] spi_sunxi_setup 1352
  453. [ 4.262324] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-2 with 2 Slaves attached
  454. [ 4.276126] [spi]: [spi-2]: driver probe succeed, base f02ec000, irq 44, dma_tx_id 29, dma_rx_id 26!
  455. [ 4.291232] tun: Universal TUN/TAP device driver, 1.6
  456. [ 4.299313] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  457. [ 4.308961] eth%d: device MAC address ea:09:16:d4:ae:b2
  458. [ 4.317843] [gmac]: sun6i_gmac platform driver registration completed
  459. [ 4.327524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  460. [ 4.337335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  461. [ 4.347029] [sw-ehci1]: open clock
  462. [ 4.373650] [sw-ehci1]: Set USB Power ON
  463. [ 4.380674] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  464. [ 4.394452] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  465. [ 4.404965] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  466. [ 4.414691] ata1: SATA link down (SStatus 0 SControl 300)
  467. [ 4.424657] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  468. [ 4.433203] ehci_irq: port change detect
  469. [ 4.440301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  470. [ 4.450275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  471. [ 4.463611] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  472. [ 4.477398] usb usb1: Manufacturer: Linux 3.4.79+ ehci_hcd
  473. [ 4.486159] usb usb1: SerialNumber: sw-ehci
  474. [ 4.494038] hub 1-0:1.0: USB hub found
  475. [ 4.500905] hub 1-0:1.0: 1 port detected
  476. [ 4.508232] [sw-ohci1]: open clock
  477. [ 4.534612] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  478. [ 4.549827] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  479. [ 4.559911] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  480. [ 4.628740] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  481. [ 4.638522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  482. [ 4.651513] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  483. [ 4.661742] usb usb2: Manufacturer: Linux 3.4.79+ ohci_hcd
  484. [ 4.670271] usb usb2: SerialNumber: sw-ohci
  485. [ 4.677897] hub 2-0:1.0: USB hub found
  486. [ 4.684518] hub 2-0:1.0: 1 port detected
  487. [ 4.691712] [sw-ehci2]: open clock
  488. [ 4.704737] ehci_irq: port change detect
  489. [ 4.724713] [sw-ehci2]: Set USB Power ON
  490. [ 4.731323] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  491. [ 4.744281] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  492. [ 4.754297] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  493. [ 4.764709] The port change to OHCI now!
  494. [ 4.784698] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  495. [ 4.792846] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  496. [ 4.802426] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  497. [ 4.815183] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  498. [ 4.828464] usb usb3: Manufacturer: Linux 3.4.79+ ehci_hcd
  499. [ 4.836928] usb usb3: SerialNumber: sw-ehci
  500. [ 4.844483] hub 3-0:1.0: USB hub found
  501. [ 4.856164] hub 3-0:1.0: 1 port detected
  502. [ 4.863314] [sw-ohci2]: open clock
  503. [ 4.889586] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  504. [ 4.899599] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  505. [ 4.909450] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  506. [ 4.978724] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  507. [ 4.988388] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  508. [ 5.001303] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  509. [ 5.011508] usb usb4: Manufacturer: Linux 3.4.79+ ohci_hcd
  510. [ 5.020112] usb usb4: SerialNumber: sw-ohci
  511. [ 5.024695] usb 2-1: new low-speed USB device number 2 using sw-ohci
  512. [ 5.037131] hub 4-0:1.0: USB hub found
  513. [ 5.043797] hub 4-0:1.0: 1 port detected
  514. [ 5.051071] usbcore: registered new interface driver cdc_acm
  515. [ 5.059660] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  516. [ 5.073449] Initializing USB Mass Storage driver...
  517. [ 5.081435] usbcore: registered new interface driver usb-storage
  518. [ 5.090399] USB Mass Storage support registered.
  519. [ 5.098014] usbcore: registered new interface driver libusual
  520. [ 5.106673] usbcore: registered new interface driver ums-alauda
  521. [ 5.115425] usbcore: registered new interface driver ums-cypress
  522. [ 5.124190] usbcore: registered new interface driver ums-datafab
  523. [ 5.132925] usbcore: registered new interface driver ums_eneub6250
  524. [ 5.141824] usbcore: registered new interface driver ums-freecom
  525. [ 5.150565] usbcore: registered new interface driver ums-isd200
  526. [ 5.164059] usbcore: registered new interface driver ums-jumpshot
  527. [ 5.172644] usbcore: registered new interface driver ums-karma
  528. [ 5.180937] usbcore: registered new interface driver ums-onetouch
  529. [ 5.189356] usbcore: registered new interface driver ums-sddr09
  530. [ 5.197522] usbcore: registered new interface driver ums-sddr55
  531. [ 5.205545] usbcore: registered new interface driver ums-usbat
  532. [ 5.213473] usbcore: registered new interface driver usbserial
  533. [ 5.221264] usbcore: registered new interface driver usbserial_generic
  534. [ 5.229699] USB Serial support registered for generic
  535. [ 5.246707] usb 2-1: New USB device found, idVendor=05af, idProduct=0807
  536. [ 5.255267] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  537. [ 5.264279] usb 2-1: Product: USB K/B
  538. [ 5.273344] usbserial: USB Serial Driver core
  539. [ 5.279664] usbcore: registered new interface driver aircable
  540. [ 5.287229] USB Serial support registered for aircable
  541. [ 5.294163] usbcore: registered new interface driver ark3116
  542. [ 5.301619] USB Serial support registered for ark3116
  543. [ 5.308483] usbcore: registered new interface driver belkin
  544. [ 5.315842] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
  545. [ 5.327898] usbcore: registered new interface driver ch341
  546. [ 5.335487] USB Serial support registered for ch341-uart
  547. [ 5.342976] usbcore: registered new interface driver cp210x
  548. [ 5.350807] USB Serial support registered for cp210x
  549. [ 5.358141] usbcore: registered new interface driver cyberjack
  550. [ 5.366396] USB Serial support registered for Reiner SCT Cyberjack USB card reader
  551. [ 5.379031] usbcore: registered new interface driver cypress
  552. [ 5.387453] USB Serial support registered for DeLorme Earthmate USB
  553. [ 5.396592] USB Serial support registered for HID->COM RS232 Adapter
  554. [ 5.405841] USB Serial support registered for Nokia CA-42 V2 Adapter
  555. [ 5.415209] usbcore: registered new interface driver debug
  556. [ 5.423678] USB Serial support registered for debug
  557. [ 5.431554] usbcore: registered new interface driver digi_acceleport
  558. [ 5.440886] USB Serial support registered for Digi 2 port USB adapter
  559. [ 5.450340] USB Serial support registered for Digi 4 port USB adapter
  560. [ 5.464719] usbcore: registered new interface driver io_edgeport
  561. [ 5.473646] USB Serial support registered for Edgeport 2 port adapter
  562. [ 5.483073] USB Serial support registered for Edgeport 4 port adapter
  563. [ 5.492397] USB Serial support registered for Edgeport 8 port adapter
  564. [ 5.501623] USB Serial support registered for EPiC device
  565. [ 5.509763] usbcore: registered new interface driver io_ti
  566. [ 5.517967] USB Serial support registered for Edgeport TI 1 port adapter
  567. [ 5.527407] USB Serial support registered for Edgeport TI 2 port adapter
  568. [ 5.536735] usbcore: registered new interface driver empeg
  569. [ 5.544789] USB Serial support registered for empeg
  570. [ 5.552235] usbcore: registered new interface driver f81232
  571. [ 5.560376] USB Serial support registered for f81232
  572. [ 5.567917] usbcore: registered new interface driver ftdi_sio
  573. [ 5.576233] USB Serial support registered for FTDI USB Serial Device
  574. [ 5.585291] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  575. [ 5.593669] usbcore: registered new interface driver funsoft
  576. [ 5.601861] USB Serial support registered for funsoft
  577. [ 5.609442] usbcore: registered new interface driver garmin_gps
  578. [ 5.617972] USB Serial support registered for Garmin GPS usb/tty
  579. [ 5.626658] usbcore: registered new interface driver hp4X
  580. [ 5.634677] USB Serial support registered for hp4X
  581. [ 5.642086] usbcore: registered new interface driver ipaq
  582. [ 5.650075] USB Serial support registered for PocketPC PDA
  583. [ 5.658198] ipaq: v1.0:USB PocketPC PDA driver
  584. [ 5.665308] usbcore: registered new interface driver ipwtty
  585. [ 5.673522] USB Serial support registered for IPWireless converter
  586. [ 5.682390] usbcore: registered new interface driver ir-usb
  587. [ 5.690714] USB Serial support registered for IR Dongle
  588. [ 5.698748] ir_usb: v0.5:USB IR Dongle driver
  589. [ 5.705963] usbcore: registered new interface driver iuu_phoenix
  590. [ 5.714876] USB Serial support registered for iuu_phoenix
  591. [ 5.723150] usbcore: registered new interface driver keyspan
  592. [ 5.731786] USB Serial support registered for Keyspan - (without firmware)
  593. [ 5.741677] USB Serial support registered for Keyspan 1 port adapter
  594. [ 5.750981] USB Serial support registered for Keyspan 2 port adapter
  595. [ 5.760192] USB Serial support registered for Keyspan 4 port adapter
  596. [ 5.774348] usbcore: registered new interface driver keyspan_pda
  597. [ 5.783132] USB Serial support registered for Keyspan PDA
  598. [ 5.791269] USB Serial support registered for Keyspan PDA - (prerenumeration)
  599. [ 5.801123] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
  600. [ 5.814349] usbcore: registered new interface driver kl5kusb105d
  601. [ 5.823124] USB Serial support registered for KL5KUSB105D / PalmConnect
  602. [ 5.832533] usbcore: registered new interface driver kobil
  603. [ 5.840769] USB Serial support registered for KOBIL USB smart card terminal
  604. [ 5.850571] usbcore: registered new interface driver mct_u232
  605. [ 5.859131] USB Serial support registered for MCT U232
  606. [ 5.867117] usbcore: registered new interface driver metro-usb
  607. [ 5.875783] USB Serial support registered for Metrologic USB to serial converter.
  608. [ 5.888900] usbcore: registered new interface driver moschip7720
  609. [ 5.897837] USB Serial support registered for Moschip 2 port adapter
  610. [ 5.907169] usbcore: registered new interface driver mos7840
  611. [ 5.915809] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
  612. [ 5.929174] usbcore: registered new interface driver moto-modem
  613. [ 5.938140] USB Serial support registered for moto-modem
  614. [ 5.946493] usbcore: registered new interface driver navman
  615. [ 5.955142] USB Serial support registered for navman
  616. [ 5.963282] usbcore: registered new interface driver omninet
  617. [ 5.972200] USB Serial support registered for ZyXEL - omni.net lcd plus usb
  618. [ 5.982518] usbcore: registered new interface driver opticon
  619. [ 5.991476] USB Serial support registered for opticon
  620. [ 5.999895] usbcore: registered new interface driver option
  621. [ 6.008850] USB Serial support registered for GSM modem (1-port)
  622. [ 6.018526] usbcore: registered new interface driver oti6858
  623. [ 6.027545] USB Serial support registered for oti6858
  624. [ 6.035945] usbcore: registered new interface driver pl2303
  625. [ 6.044848] USB Serial support registered for pl2303
  626. [ 6.053075] usbcore: registered new interface driver qcaux
  627. [ 6.061779] USB Serial support registered for qcaux
  628. [ 6.074925] usbcore: registered new interface driver qcserial
  629. [ 6.083874] USB Serial support registered for Qualcomm USB modem
  630. [ 6.093065] safe_serial: v0.1:USB Safe Encapsulated Serial
  631. [ 6.101713] usbcore: registered new interface driver safe_serial
  632. [ 6.110851] USB Serial support registered for safe_serial
  633. [ 6.119412] usbcore: registered new interface driver siemens_mpi
  634. [ 6.128541] USB Serial support registered for siemens_mpi
  635. [ 6.137040] usbcore: registered new interface driver sierra
  636. [ 6.145658] USB Serial support registered for Sierra USB modem
  637. [ 6.154529] usbcore: registered new interface driver spcp8x5
  638. [ 6.163197] USB Serial support registered for SPCP8x5
  639. [ 6.171272] usbcore: registered new interface driver ssu100
  640. [ 6.179876] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
  641. [ 6.193420] usbcore: registered new interface driver symbol
  642. [ 6.202055] USB Serial support registered for symbol
  643. [ 6.210090] usbcore: registered new interface driver ti_usb_3410_5052
  644. [ 6.219684] USB Serial support registered for TI USB 3410 1 port adapter
  645. [ 6.229506] USB Serial support registered for TI USB 5052 2 port adapter
  646. [ 6.239194] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
  647. [ 6.248435] usbcore: registered new interface driver visor
  648. [ 6.256974] USB Serial support registered for Handspring Visor / Palm OS
  649. [ 6.266799] USB Serial support registered for Sony Clie 5.0
  650. [ 6.275396] USB Serial support registered for Sony Clie 3.5
  651. [ 6.283861] visor: USB HandSpring Visor / Palm OS driver
  652. [ 6.292120] usbcore: registered new interface driver whiteheat
  653. [ 6.300893] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
  654. [ 6.314967] USB Serial support registered for Connect Tech - WhiteHEAT
  655. [ 6.324567] usbcore: registered new interface driver vivopay-serial
  656. [ 6.333888] USB Serial support registered for vivopay-serial
  657. [ 6.342612] usbcore: registered new interface driver zio
  658. [ 6.350970] USB Serial support registered for zio
  659. [ 6.358723] usbcore: registered new interface driver trancevibrator
  660. [ 6.368316] mousedev: PS/2 mouse device common for all mice
  661. [ 6.382870] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  662. [ 6.392120] i2c /dev entries driver
  663. [ 6.399178] config i2c gpio with gpio_config api
  664. [ 6.408069] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  665. [ 6.416918] I2C: i2c-0: AW16XX I2C adapter
  666. [ 6.424165] I2C: i2c-1: AW16XX I2C adapter
  667. [ 6.431323] I2C: i2c-2: AW16XX I2C adapter
  668. [ 6.438215] lirc_dev: IR Remote Control driver registered, major 247
  669. [ 6.447452] IR NEC protocol handler initialized
  670. [ 6.454705] IR RC5(x) protocol handler initialized
  671. [ 6.462171] IR RC6 protocol handler initialized
  672. [ 6.469329] IR JVC protocol handler initialized
  673. [ 6.476449] IR Sony protocol handler initialized
  674. [ 6.483711] IR RC5 (streamzap) protocol handler initialized
  675. [ 6.491951] IR SANYO protocol handler initialized
  676. [ 6.499290] IR MCE Keyboard/mouse protocol handler initialized
  677. [ 6.507750] IR LIRC bridge handler initialized
  678. [ 6.514899] usbcore: registered new interface driver uvcvideo
  679. [ 6.523176] USB Video Class driver (1.1.1)
  680. [ 6.529805] [cedar dev]: install start!!!
  681. [ 6.536668] [cedar dev]: install end!!!
  682. [ 6.542862] [tt]----- avs_dev driver load... ----
  683. [ 6.549955] [tt]----- register iomem ----
  684. [ 6.557146] Cannot reserve region for ccmu
  685. [ 6.563621] [tt]--- avs_dev driver load ok!! -----
  686. [ 6.570660] [ace_drv] start!!!
  687. [ 6.576194] [ace_drv] init end!!!
  688. [ 6.581624] [pa_drv] start!!!
  689. [ 6.586929] [pa_drv] init end!!!
  690. [ 6.592262] axp20_ldo1: 1300 mV
  691. [ 6.598721] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  692. [ 6.607028] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  693. [ 6.615199] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  694. [ 6.623370] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  695. [ 6.631533] axp20_buck3: 700 <--> 3500 mV at 1250 mV
  696. [ 6.639193] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  697. [ 6.647006] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  698. [ 6.674500] axp20_ldo2: Failed to create debugfs directory
  699. [ 6.687922] Bluetooth: HCI UART driver ver 2.2
  700. [ 6.694502] Bluetooth: HCI H4 protocol initialized
  701. [ 6.701392] Bluetooth: HCI BCSP protocol initialized
  702. [ 6.708391] Bluetooth: HCILL protocol initialized
  703. [ 6.715073] Bluetooth: HCIATH3K protocol initialized
  704. [ 6.722161] usbcore: registered new interface driver btusb
  705. [ 6.729729] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  706. [ 6.737545] [mmc_pm]: failed to fetch sdio card configuration!
  707. [ 6.758716] input: USB K/B as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input1
  708. [ 6.771573] generic-usb 0003:05AF:0807.0001: input,hidraw0: USB HID v1.10 Keyboard [USB K/B] on usb-sw-ohci-1/input0
  709. [ 6.808928] input: USB K/B as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.1/input/input2
  710. [ 6.822615] generic-usb 0003:05AF:0807.0002: input,hidraw1: USB HID v1.10 Device [USB K/B] on usb-sw-ohci-1/input1
  711. [ 6.838821] usbcore: registered new interface driver usbhid
  712. [ 6.847384] usbhid: USB HID core driver
  713. [ 6.854701] logger: created 256K log 'log_main'
  714. [ 6.862374] logger: created 256K log 'log_events'
  715. [ 6.870221] logger: created 256K log 'log_radio'
  716. [ 6.877900] logger: created 256K log 'log_system'
  717. [ 6.885930] usbcore: registered new interface driver snd-usb-audio
  718. [ 6.896933] pktgen: Packet Generator for packet performance testing. Version: 2.74
  719. [ 6.910585] nf_conntrack version 0.5.0 (14011 buckets, 56044 max)
  720. [ 6.920192] IPVS: Registered protocols ()
  721. [ 6.927311] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
  722. [ 6.940968] IPVS: Creating netns size=880 id=0
  723. [ 6.948637] IPVS: ipvs loaded.
  724. [ 6.954951] IPv4 over IPv4 tunneling driver
  725. [ 6.963039] ip_tables: (C) 2000-2006 Netfilter Core Team
  726. [ 6.971603] arp_tables: (C) 2002 David S. Miller
  727. [ 6.979271] TCP: cubic registered
  728. [ 6.990472] Initializing XFRM netlink socket
  729. [ 6.998176] NET: Registered protocol family 10
  730. [ 7.006371] IPv6 over IPv4 tunneling driver
  731. [ 7.013792] NET: Registered protocol family 17
  732. [ 7.020964] NET: Registered protocol family 15
  733. [ 7.027958] Bridge firewalling registered
  734. [ 7.034608] Bluetooth: RFCOMM TTY layer initialized
  735. [ 7.041906] Bluetooth: RFCOMM socket layer initialized
  736. [ 7.049448] Bluetooth: RFCOMM ver 1.11
  737. [ 7.055555] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  738. [ 7.063285] Bluetooth: BNEP filters: protocol multicast
  739. [ 7.070983] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  740. [ 7.079540] 8021q: 802.1Q VLAN Support v1.8
  741. [ 7.086183] [mmc_pm]: No sdio card, please check your config !!
  742. [ 7.094490] Registering the dns_resolver key type
  743. [ 7.101857] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  744. [ 7.114299] Registering SWP/SWPB emulation handler
  745. [ 7.121901] registered taskstats version 1
  746. [ 7.128946] axp20_buck3: incomplete constraints, leaving on
  747. [ 7.137169] axp20_buck2: incomplete constraints, leaving on
  748. [ 7.145312] axp20_ldo4: incomplete constraints, leaving on
  749. [ 7.153346] axp20_ldo3: incomplete constraints, leaving on
  750. [ 7.161294] axp20_ldo2: incomplete constraints, leaving on
  751. [ 7.169189] axp20_ldo1: incomplete constraints, leaving on
  752. [ 7.177010] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:19:42 UTC (1262305182)
  753. [ 7.189985] ALSA device list:
  754. [ 7.195123] #0: sunxi-CODEC Audio Codec
  755. [ 7.412314] EXT3-fs (nandd): error: couldn't mount because of unsupported optional features (240)
  756. [ 7.434945] EXT2-fs (nandd): error: couldn't mount because of unsupported optional features (244)
  757. [ 8.325437] EXT4-fs (nandd): recovery complete
  758. [ 8.332671] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
  759. [ 8.345843] VFS: Mounted root (ext4 filesystem) on device 93:4.
  760. [ 8.355766] devtmpfs: mounted
  761. [ 8.361701] Freeing init memory: 192K
  762. [ 9.383653] init: plymouth-upstart-bridge main process (61) terminated with status 1
  763. [ 9.397365] init: plymouth-upstart-bridge main process ended, respawning
  764. [ 9.460076] init: plymouth-upstart-bridge main process (71) terminated with status 1
  765. [ 9.477071] init: plymouth-upstart-bridge main process ended, respawning
  766. [ 9.525350] init: plymouth-upstart-bridge main process (74) terminated with status 1
  767. [ 9.539527] init: plymouth-upstart-bridge main process ended, respawning
  768. [ 9.574950] init: plymouth-upstart-bridge main process (77) terminated with status 1
  769. [ 9.589738] init: plymouth-upstart-bridge main process ended, respawning
  770. [ 9.623644] init: plymouth-upstart-bridge main process (79) terminated with status 1
  771. [ 9.641051] init: plymouth-upstart-bridge main process ended, respawning
  772. [ 9.674608] init: plymouth-upstart-bridge main process (81) terminated with status 1
  773. [ 9.692068] init: plymouth-upstart-bridge main process ended, respawning
  774. [ 9.704285] init: ureadahead main process (64) terminated with status 5
  775. * Stopping Send an event to indicate plymouth is up[ OK ]
  776.  
  777. * Starting Mount filesystems on boot[ OK ]
  778.  
  779. * Starting Signal sysvinit that the rootfs is mounted[ OK ]
  780.  
  781. * Starting Populate /dev filesystem[ OK ]
  782.  
  783. * Stopping Populate /dev filesystem[ OK ]
  784.  
  785. * Starting Fix-up /sys/kernel/debug filesystem[ OK ]
  786.  
  787. * Stopping Fix-up /sys/kernel/debug filesystem[ OK ]
  788.  
  789. * Starting Clean /tmp directory[ OK ]
  790.  
  791. * Stopping Clean /tmp directory[ OK ]
  792.  
  793. * Starting Populate and link to /run filesystem[ OK ]
  794.  
  795. * Stopping Populate and link to /run filesystem[ OK ]
  796.  
  797. * Stopping Track if upstart is running in a container[ OK ]
  798.  
  799. * Starting Initialize or finalize resolvconf[ OK ]
  800.  
  801. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  802.  
  803. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  804.  
  805. * Starting Bridge udev events into upstart[ OK ]
  806.  
  807. * Starting Signal sysvinit that local filesystems are mounted[ OK ]
  808.  
  809. * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
  810.  
  811. * Starting device node and kernel event manager[ OK ]
  812.  
  813. * Starting flush early job output to logs[ OK ]
  814.  
  815. * Stopping Mount filesystems on boot[ OK ]
  816.  
  817. * Stopping flush early job output to logs[ OK ]
  818.  
  819. * Starting load modules from /etc/modules[ OK ]
  820.  
  821. * Starting cold plug devices[ OK ]
  822.  
  823. * Starting log initial device creation[ OK ]
  824.  
  825. * Starting D-Bus system message bus[ OK ]
  826.  
  827. * Starting SystemD login management service[ OK ]
  828.  
  829. * Starting set console font[ OK ]
  830.  
  831. * Stopping set console font[ OK ]
  832.  
  833. * Starting userspace bootsplash[ OK ]
  834.  
  835. * Starting bluetooth daemon[ OK ]
  836.  
  837. * Starting Send an event to indicate plymouth is up[ OK ]
  838.  
  839. * Starting system logging daemon[ OK ]
  840.  
  841. * Stopping load modules from /etc/modules[ OK ]
  842.  
  843. * Stopping userspace bootsplash[ OK ]
  844.  
  845. * Starting mDNS/DNS-SD daemon[ OK ]
  846.  
  847. * Stopping Send an event to indicate plymouth is up[ OK ]
  848.  
  849. * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  850.  
  851. * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[fail]
  852.  
  853. * Starting configure network device security[ OK ]
  854.  
  855. * Starting configure network device[ OK ]
  856.  
  857. * Starting configure network device security[ OK ]
  858.  
  859. * Starting configure network device security[ OK ]
  860.  
  861. * Starting configure network device security[ OK ]
  862.  
  863. * Starting configure network device[ OK ]
  864.  
  865. * Starting configure network device[ OK ]
  866.  
  867. * Starting Mount network filesystems[ OK ]
  868.  
  869. * Starting Failsafe Boot Delay[ OK ]
  870.  
  871. * Stopping Mount network filesystems[ OK ]
  872.  
  873. * Stopping cold plug devices[ OK ]
  874.  
  875. * Starting configure network device[ OK ]
  876.  
  877. * Stopping Failsafe Boot Delay[ OK ]
  878.  
  879. * Starting System V initialisation compatibility[ OK ]
  880.  
  881. * Stopping log initial device creation[ OK ]
  882.  
  883. * Setting up X socket directories... 
  884. [ OK ]
  885.  
  886. * Starting configure network device security[ OK ]
  887.  
  888. * Starting save udev log and update rules[ OK ]
  889.  
  890. * Stopping save udev log and update rules[ OK ]
  891.  
  892. * Stopping System V initialisation compatibility[ OK ]
  893.  
  894. [ 24.040399] EDID mode used without valid EDID info
  895.  
  896.  
  897. Last login: Fri Jan 1 00:16:30 UTC 2010 on tty1
  898. Welcome to Linaro 14.04 (GNU/Linux 3.4.79+ armv7l)
  899.  
  900. * Documentation: https://wiki.linaro.org/
  901. root@linaro-alip:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!