Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.5.3-00284-g20bb2a4-dirty (liar@liar-desktop2) (gcc version 4.7.3 (GCC) ) #85 PREEMPT Sat Jan 25 17:52:54 CET 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: Nokia RM-680 board
- <6>[ 0.000000] Reserving 6291456 bytes SDRAM for VRAM
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 258816
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c06df624, node_mem_map c0c14000
- <7>[ 0.000000] Normal zone: 1520 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 189712 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 528 pages used for memmap
- <7>[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
- <6>[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- <6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>[ 0.000000] pcpu-alloc: [0] 0
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256768
- <5>[ 0.000000] Kernel command line: init=/sbin/preinit root=/dev/mmcblk0p1 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=01234142460010005011 imei=357923041053317 g_nokia.iSerialNumber=357923041053317 serialnumber=CCM955238 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1501 vram=6m omapfb.vram=0:6M console=ttyS0,115200n8 omap3_die_id
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] allocated 2097152 bytes of page_cgroup
- <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>[ 0.000000] Memory: 747MB 264MB = 1011MB total
- <5>[ 0.000000] Memory: 1011760k/1011760k available, 36816k reserved, 270336K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc064be98 (6416 kB)
- <5>[ 0.000000] .init : 0xc064c000 - 0xc067c3dc ( 193 kB)
- <5>[ 0.000000] .data : 0xc067e000 - 0xc06e0380 ( 393 kB)
- <5>[ 0.000000] .bss : 0xc06e03a4 - 0xc0c13870 (5326 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>[ 0.000000] NR_IRQS:474
- <6>[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- <6>[ 0.000000] Total of 96 interrupts on 1 active controller
- <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- <6>[ 0.000000] Console: colour dummy device 80x30
- <4>[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- <4>[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- <4>[ 0.000000] ... MAX_LOCK_DEPTH: 48
- <4>[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- <4>[ 0.000000] ... CLASSHASH_SIZE: 4096
- <4>[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- <4>[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- <4>[ 0.000000] ... CHAINHASH_SIZE: 16384
- <4>[ 0.000000] memory used by lock dependency info: 3695 kB
- <4>[ 0.000000] per task-struct memory footprint: 1152 bytes
- <6>[ 0.000427] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- <6>[ 0.085906] pid_max: default: 32768 minimum: 301
- <6>[ 0.086334] Security Framework initialized
- <6>[ 0.086456] Mount-cache hash table entries: 512
- <6>[ 0.090454] Initializing cgroup subsys cpuacct
- <6>[ 0.090484] Initializing cgroup subsys memory
- <6>[ 0.090667] Initializing cgroup subsys devices
- <6>[ 0.090698] Initializing cgroup subsys freezer
- <6>[ 0.090881] CPU: Testing write buffer coherency: ok
- <6>[ 0.091735] Setting up static identity map for 0x80495330 - 0x80495388
- <6>[ 0.095092] devtmpfs: initialized
- <6>[ 0.108062] dummy:
- <6>[ 0.109771] NET: Registered protocol family 16
- <6>[ 0.110992] GPMC revision 5.0
- <3>[ 0.111206] gpmc: irq-20 could not claim: err -22
- <7>[ 0.115600] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
- <6>[ 0.116058] OMAP GPIO hardware version 2.5
- <7>[ 0.116668] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
- <7>[ 0.117675] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
- <7>[ 0.118591] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
- <7>[ 0.119476] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
- <7>[ 0.120391] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
- <6>[ 0.122955] RM-680/696 board, rev 1501
- <6>[ 0.122985] omap_mux_init: Add partition: #1: core, flags: 0
- <3>[ 0.126495] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
- <6>[ 0.127899] Reprogramming SDRC clock to 390400000 Hz
- <6>[ 0.128295] wl1271 SDIO
- <6>[ 0.133453] hw-breakpoint: debug architecture 0x4 unsupported.
- <4>[ 0.139862] omap-mcbsp.2: alias fck already exists
- <4>[ 0.140228] omap-mcbsp.3: alias fck already exists
- <6>[ 0.142608] Reserving DMA channels 0 and 1 for HS ROM code
- <6>[ 0.142608] OMAP DMA hardware revision 5.0
- <6>[ 0.157470] bio: create slab <bio-0> at 0
- <6>[ 0.159423] vwl1271: 1800 mV
- <6>[ 0.160034] vbat: 3700 mV
- <6>[ 0.160736] rm680_vemmc: 2900 mV normal standby
- <5>[ 0.162048] SCSI subsystem initialized
- <6>[ 0.162658] usbcore: registered new interface driver usbfs
- <6>[ 0.162811] usbcore: registered new interface driver hub
- <6>[ 0.163116] usbcore: registered new device driver usb
- <6>[ 0.163940] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2900 kHz
- <6>[ 0.171722] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
- <6>[ 0.172332] twl 1-0048: power (irq 325) chaining IRQs 328..335
- <6>[ 0.174713] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
- <7>[ 0.175537] gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
- <6>[ 0.177337] VUSB1V5: 1500 mV normal standby
- <6>[ 0.178741] VUSB1V8: 1800 mV normal standby
- <6>[ 0.179962] VUSB3V1: 3100 mV normal standby
- <7>[ 0.183624] twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <6>[ 0.184265] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- <6>[ 0.186431] rm696_vio: 1800 mV normal standby
- <6>[ 0.187927] vdd_mpu_iva: 600 <--> 1450 mV normal
- <6>[ 0.188995] vdd_core: 600 <--> 1450 mV normal
- <6>[ 0.190032] VDAC: 1800 mV normal standby
- <6>[ 0.191284] VPLL2: 1800 mV normal standby
- <6>[ 0.192596] rm696_vmmc2: 3000 mV normal standby
- <6>[ 0.193878] rm696_vaux1: 2800 mV normal standby
- <6>[ 0.195129] rm696_vaux4: 2800 mV normal standby
- <6>[ 0.196166] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- <6>[ 0.211242] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz
- <6>[ 0.212432] Linux video capture interface: v2.00
- <6>[ 0.213378] omap-iommu omap-iommu.0: isp registered
- <6>[ 0.213836] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.216247] Bluetooth: Core ver 2.16
- <6>[ 0.216400] NET: Registered protocol family 31
- <6>[ 0.216400] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.216491] Bluetooth: HCI socket layer initialized
- <6>[ 0.216522] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.216613] Bluetooth: SCO socket layer initialized
- <6>[ 0.216644] nfc: nfc_init: NFC Core ver 0.1
- <6>[ 0.216888] NET: Registered protocol family 39
- <6>[ 0.217651] Switching to clocksource 32k_counter
- <6>[ 0.248291] NET: Registered protocol family 2
- <6>[ 0.248962] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.250701] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.254394] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
- <6>[ 0.294677] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.294769] TCP: reno registered
- <6>[ 0.294830] UDP hash table entries: 512 (order: 3, 40960 bytes)
- <6>[ 0.295471] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
- <6>[ 0.296722] NET: Registered protocol family 1
- <6>[ 0.299713] omap_dsp_init: 600000 bytes @ aec00000
- <6>[ 0.303680] audit: initializing netlink socket (disabled)
- <5>[ 0.304046] type=2000 audit(0.296:1): initialized
- <4>[ 0.448089] highmem bounce pool size: 64 pages
- <6>[ 0.474945] fuse init (API version 7.19)
- <6>[ 0.479125] Btrfs loaded
- <6>[ 0.479187] msgmni has been set to 1448
- <6>[ 0.486114] io scheduler noop registered
- <6>[ 0.486145] io scheduler deadline registered
- <6>[ 0.486267] io scheduler cfq registered (default)
- <6>[ 0.546234] OMAP DSS rev 2.0
- <6>[ 0.546447] OMAP DISPC rev 3.0
- <6>[ 0.546813] OMAP VENC rev 2
- <6>[ 0.547515] OMAP DSI rev 1.0
- <6>[ 0.563415] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- <6>[ 0.567687] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- <6>[ 0.569152] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- <6>[ 0.570312] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- <6>[ 0.571380] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- <6>[ 0.590087] brd: module loaded
- <6>[ 0.600494] loop: module loaded
- <6>[ 0.623687] lis3lv02d: 8 bits sensor found
- <6>[ 0.679840] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
- <6>[ 0.691436] OneNAND driver initializing
- <6>[ 0.692047] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- <7>[ 0.692413] OneNAND Manufacturer: Samsung (0xec)
- <6>[ 0.692413] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- <6>[ 0.692443] OneNAND version = 0x0232
- <7>[ 0.692443] Chip support all block unlock
- <7>[ 0.692443] Chip has 4KiB pagesize
- <7>[ 0.692474] Chip has cache program feature
- <6>[ 0.692504] Scanning device for bad blocks
- <7>[ 0.704742] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x4f addr8 0x0
- <6>[ 0.704772] OneNAND eraseblock 79 is an initial bad block
- <7>[ 0.704864] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x50 addr8 0x0
- <6>[ 0.704895] OneNAND eraseblock 80 is an initial bad block
- <7>[ 0.705749] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x56 addr8 0x0
- <6>[ 0.705749] OneNAND eraseblock 86 is an initial bad block
- <5>[ 0.999145] 6 cmdlinepart partitions found on MTD device omap2-onenand
- <5>[ 0.999176] Creating 6 MTD partitions on "omap2-onenand":
- <5>[ 0.999206] 0x000000000000-0x000000100000 : "bootloader"
- <5>[ 1.001342] 0x000000100000-0x0000003c0000 : "config"
- <5>[ 1.002471] 0x0000003c0000-0x0000013c0000 : "kernel"
- <5>[ 1.004211] 0x0000013c0000-0x0000015c0000 : "log"
- <7>[ 1.007629] mtdoops: ready 28, 116 (no erase)
- <6>[ 1.007629] mtdoops: Attached to MTD device 3
- <5>[ 1.007659] 0x0000015c0000-0x00001e000000 : "var"
- <5>[ 1.032043] 0x00001e000000-0x000020000000 : "moslo"
- <6>[ 1.039916] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.039916] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.040771] usbcore: registered new interface driver asix
- <6>[ 1.040893] usbcore: registered new interface driver cdc_ether
- <6>[ 1.041046] usbcore: registered new interface driver smsc95xx
- <6>[ 1.041168] usbcore: registered new interface driver net1080
- <6>[ 1.041259] usbcore: registered new interface driver cdc_subset
- <6>[ 1.041381] usbcore: registered new interface driver zaurus
- <6>[ 1.041564] usbcore: registered new interface driver cdc_ncm
- <6>[ 1.042480] usbcore: registered new interface driver cdc_wdm
- <6>[ 1.042510] Initializing USB Mass Storage driver...
- <6>[ 1.042663] usbcore: registered new interface driver usb-storage
- <6>[ 1.042663] USB Mass Storage support registered.
- <6>[ 1.043090] usbcore: registered new interface driver libusual
- <6>[ 1.043121] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- <7>[ 1.051055] twl4030_usb twl4030_usb: twl4030_phy_resume
- <7>[ 1.051391] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 1.051391] musb-hdrc: MHDRC RTL version 1.800
- <7>[ 1.051422] musb-hdrc: setup fifo_mode 4
- <7>[ 1.051422] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 1.053283] musb-hdrc musb-hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- <7>[ 1.056152] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <4>[ 1.069549] i2c-core: driver [atmel_mxt] using legacy suspend method
- <4>[ 1.069580] i2c-core: driver [atmel_mxt] using legacy resume method
- <6>[ 1.071350] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
- <6>[ 1.074035] twl_rtc twl_rtc: Enabling TWL-RTC
- <6>[ 1.078521] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>[ 1.079528] i2c /dev entries driver
- <6>[ 1.082092] Driver for 1-wire Dallas network protocol.
- <6>[ 1.086425] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- <6>[ 1.087615] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.087646] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.087646] Bluetooth: HCI BCSP protocol initialized
- <6>[ 1.087677] Bluetooth: HCILL protocol initialized
- <6>[ 1.087799] hci_h4p hci_h4p: Registering HCI H4P device
- <6>[ 1.090576] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- <6>[ 1.092712] cpuidle: using governor ladder
- <6>[ 1.092742] cpuidle: using governor menu
- <4>[ 1.093841] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
- <6>[ 1.140319] input: Atmel mXT Touchscreen as /devices/platform/omap_i2c.2/i2c-2/2-004b/input/input2
- <6>[ 1.141326] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- <4>[ 1.142883] omap_hsmmc omap_hsmmc.2: Failed to get debounce clk
- <6>[ 1.194824] omap_sham_mod_init: loading omap-sham driver
- <6>[ 1.195098] omap-sham omap-sham: hw accel on OMAP rev 0.9
- <6>[ 1.197814] usbcore: registered new interface driver usbhid
- <6>[ 1.197845] usbhid: USB HID core driver
- <6>[ 1.210784] DSP Bridge driver loaded
- <6>[ 1.212890] ashmem: initialized
- <6>[ 1.213500] logger: created 256K log 'log_main'
- <6>[ 1.214050] logger: created 256K log 'log_events'
- <6>[ 1.214569] logger: created 256K log 'log_radio'
- <6>[ 1.215057] logger: created 256K log 'log_system'
- <6>[ 1.226379] ALSA SoC for TWL4030 on Nokia DFL61 init
- <4>[ 1.284606] twl4030-codec twl4030-codec: ASoC: Failed to create Capture debugfs file
- <6>[ 1.293121] asoc: twl4030-hifi <-> omap-mcbsp.3 mapping ok
- <6>[ 1.297790] input: dfl61-twl4030 Jack as /devices/platform/dfl61audio-twl4030/sound/card0/input3
- <6>[ 1.300384] DFL61 TWL SoC init done (config 4)
- <6>[ 1.300781] ALSA for WL1273 on Nokia DFL61 init
- <3>[ 1.301208] Error: -517
- <6>[ 1.301269] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- <6>[ 1.301849] ALSA for TLV320DAC33 on Nokia DFL61 init
- <6>[ 1.304931] mmc0: new high speed MMC card at address 0001
- <6>[ 1.307189] mmcblk0: mmc0:0001 MMC64G 59.7 GiB
- <6>[ 1.307983] mmcblk0boot0: mmc0:0001 MMC64G partition 1 2.00 MiB
- <6>[ 1.312499] asoc: tlv320dac33-hifi <-> omap-mcbsp.2 mapping ok
- <6>[ 1.313354] mmcblk0boot1: mmc0:0001 MMC64G partition 2 2.00 MiB
- <6>[ 1.319702] mmcblk0: p1 p2 p3 p4
- <6>[ 1.321746] DFL61 TLV320DAC33 init done
- <6>[ 1.321990] oprofile: hardware counters not available
- <6>[ 1.321990] oprofile: using timer interrupt.
- <6>[ 1.322814] TCP: cubic registered
- <6>[ 1.322845] NET: Registered protocol family 17
- <6>[ 1.323089] NET: Registered protocol family 15
- <6>[ 1.326660] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.326721] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.326751] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.326751] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.326751] Bluetooth: BNEP filters: protocol multicast
- <5>[ 1.327606] Key type dns_resolver registered
- <6>[ 1.328308] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- <6>[ 1.337738] mmcblk0boot1: unknown partition table
- <6>[ 1.340789] mmcblk0boot0: unknown partition table
- <4>[ 1.349487] sr_init: No PMIC hook to init smartreflex
- <6>[ 1.349853] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>[ 1.350402] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>[ 1.351013] SmartReflex Class3 initialized
- <4>[ 1.358886] mmc1: card claims to support voltages below the defined range. These will be ignored.
- <4>[ 1.371032] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- <6>[ 1.373443] mmc1: new SDIO card at address 0001
- <6>[ 1.390563] clock: disabling unused clocks to save power
- <6>[ 1.476623] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- <6>[ 1.481567] ALSA for WL1273 on Nokia DFL61 init
- <3>[ 1.481994] Error: -517
- <6>[ 1.482086] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- <6>[ 1.484588] ALSA for WL1273 on Nokia DFL61 init
- <3>[ 1.484832] Error: -517
- <6>[ 1.484893] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- <6>[ 1.485717] ALSA for WL1273 on Nokia DFL61 init
- <6>[ 1.488708] asoc: wl1273-fm <-> omap-mcbsp.4 mapping ok
- <6>[ 1.489471] ALSA device list:
- <6>[ 1.489501] #0: dfl61-twl4030
- <6>[ 1.489501] #1: dfl61-dac33
- <4>[ 1.490234] Warning: unable to open an initial console.
- <6>[ 1.494323] DFL61 WL1273 init done
- <4>[ 1.516357] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
- <6>[ 1.537139] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- <6>[ 1.537322] VFS: Mounted root (ext4 filesystem) on device 179:1.
- <6>[ 1.546905] devtmpfs: mounted
- <6>[ 1.547454] Freeing init memory: 192K
- <30>[ 3.084075] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP; other)
- <6>[ 3.616180] NET: Registered protocol family 10
- <30>[ 3.629028] systemd[1]: Inserted module 'ipv6'
- <30>[ 3.631286] systemd[1]: No hostname configured.
- <30>[ 3.631805] systemd[1]: Set hostname to <localhost>.
- <30>[ 3.881683] systemd[1]: [/lib/systemd/system/boardname.service:10] Unknown lvalue 'ConditionFileNotEmpty' in section 'Unit'. Ignoring.
- <28>[ 4.302886] systemd[1]: Cannot add dependency job for unit serial-getty@getty.service, ignoring: Unit serial-getty@getty.service failed to load: No such file or directory. See system logs and 'systemctl status serial-getty@getty.service' for details.
- <27>[ 4.655639] systemd-readahead[88]: Failed to mark /: Invalid argument
- <46>[ 4.880065] systemd-journald[93]: Fixed max_use=20.0M max_size=2.5M min_size=64.0K keep_free=24.7M
- <30>[ 4.891204] systemd-udevd[91]: starting version 187
- <46>[ 4.895111] systemd-journald[93]: Reserving 4551 entries in hash table.
- <46>[ 4.921386] systemd-journald[93]: Vacuuming...
- <6>[ 5.277648] SGX clock rate 195 MHz
- <6>[ 6.437316] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
- <5>[ 7.500518] CMT driver
- <6>[ 7.878112] input: SPI vibrator as /devices/platform/omap2_mcspi.2/spi_master/spi2/input4
- <6>[ 8.363372] OMAP SSI hw driver loaded
- <4>[ 8.799011] unwind: Index not found bf0cead4
- <4>[ 8.799316] unwind: Index not found bf0cead4
- <4>[ 8.799346] unwind: Index not found bf0cead4
- <4>[ 8.799377] unwind: Index not found bf0cead4
- <4>[ 8.799468] unwind: Index not found bf0cead4
- <4>[ 8.800598] unwind: Index not found bf0cead4
- <4>[ 8.800872] unwind: Index not found bf0ceb88
- <4>[ 8.800903] unwind: Index not found bf0ceb88
- <4>[ 8.800903] unwind: Index not found bf0ceb88
- <4>[ 8.800933] unwind: Index not found bf0ceb88
- <6>[ 8.810211] kjournald starting. Commit interval 5 seconds
- <4>[ 8.810607] EXT3-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fsck is recommended
- <6>[ 8.814666] EXT3-fs (mmcblk0p3): using internal journal
- <6>[ 8.814697] EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
- <46>[ 9.082244] systemd-journald[93]: Received SIGUSR1
- <6>[ 9.507415] HSI/SSI char device loaded
- <6>[ 9.556396] NET: Registered protocol family 35
- <6>[ 9.586486] SSI protocol aka McSAAB added
- <5>[ 13.127990] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 13.174530] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 13.179687] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 13.179809] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 13.182342] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <5>[ 13.509033] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 13.510040] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 13.510681] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 13.510772] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 13.513305] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <3>[ 20.242462] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 20.242736] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 20.243286] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 20.243377] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 75.946411] pvr: lipstick: IOCTL 70 failed (13)
- <3>[ 80.244110] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 80.244201] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 140.245727] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 140.245971] cmt_speech cmt_speech: Unable to initialize HSI
- <6>[ 153.964416] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 155.049591] wl12xx: loaded
- <5>[ 155.455902] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 155.456909] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 155.457550] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 155.457641] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 155.460510] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <6>[ 155.779144] wl12xx: firmware booted (Rev 6.3.5.0.98)
- <6>[ 155.815429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <5>[ 155.826171] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 155.833862] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 155.834716] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 155.834838] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 155.838775] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <5>[ 156.059814] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 156.061035] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 156.065277] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 156.065399] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 156.067962] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <5>[ 156.098693] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- <5>[ 156.099700] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- <3>[ 156.100341] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <3>[ 156.100433] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- <5>[ 156.111328] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- <4>[ 180.840148] pvr: maliit-server: IOCTL 7 failed (1)
- <3>[ 200.247711] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 200.247955] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 217.762023] panel-nokia-dsi display0: warning, slow update: p01(13092) p12(6469) p23(2593) p34(7965)
- <7>[ 217.814483] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 217.910614] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 217.924255] wlan0: authenticated
- <7>[ 217.981292] wlan0: associating with AP with corrupt beacon
- <7>[ 217.986419] wlan0: associate with 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 217.992401] wlan0: RX AssocResp from 00:24:01:c9:48:b6 (capab=0xc31 status=0 aid=3)
- <4>[ 218.022644] unwind: Index not found bf17c334
- <4>[ 218.022674] unwind: Index not found bf17c334
- <4>[ 218.022705] unwind: Index not found bf17c334
- <4>[ 218.022735] unwind: Index not found bf17c334
- <4>[ 218.022918] unwind: Index not found bf17c334
- <4>[ 218.026458] unwind: Index not found bf17c334
- <4>[ 218.087280] unwind: Index not found bf17c3a4
- <6>[ 218.090637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <7>[ 218.093597] wlan0: associated
- <6>[ 219.258575] wl12xx: Association completed.
- <4>[ 219.313140] panel-nokia-dsi display0: warning, slow update: p01(3723) p12(6469) p23(2593) p34(8331)
- <7>[ 222.060668] wlan0: deauthenticated from 00:24:01:c9:48:b6 (Reason: 2)
- <7>[ 222.312408] wlan0: deauthenticating from 00:24:01:c9:48:b6 by local choice (reason=1)
- <6>[ 222.327575] cfg80211: Calling CRDA for country: GB
- <4>[ 222.431335] panel-nokia-dsi display0: warning, slow update: p01(16510) p12(6469) p23(3784) p34(7446)
- <7>[ 232.841552] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 232.884918] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 232.889221] wlan0: authenticated
- <7>[ 232.985412] wlan0: associating with AP with corrupt beacon
- <7>[ 232.992584] wlan0: associate with 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 232.997253] wlan0: RX AssocResp from 00:24:01:c9:48:b6 (capab=0xc31 status=0 aid=3)
- <7>[ 233.151275] wlan0: associated
- <6>[ 233.152740] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <6>[ 234.062316] wl12xx: Association completed.
- <4>[ 244.258239] pvr: fingerterm: IOCTL 7 failed (1)
- <3>[ 260.249664] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 260.249786] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 320.250793] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 320.251037] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 342.874053] pvr: fingerterm: IOCTL 7 failed (1)
- <6>[ 363.080169] wl12xx: Beacon loss detected.
- <6>[ 363.469757] wl12xx: Beacon regained.
- <4>[ 374.380126] pvr: fingerterm: IOCTL 7 failed (1)
- <3>[ 380.252960] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 380.253173] cmt_speech cmt_speech: Unable to initialize HSI
- <6>[ 395.436462] wl12xx: Beacon loss detected.
- <6>[ 395.828979] wl12xx: Beacon regained.
- <6>[ 396.975341] wl12xx: Beacon loss detected.
- <6>[ 397.877075] wl12xx: Beacon regained.
- <4>[ 409.693725] pvr: fingerterm: IOCTL 7 failed (1)
- <3>[ 440.255126] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 440.255401] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 500.257324] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 500.257568] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 550.890624] pvr: fingerterm: IOCTL 7 failed (1)
- <3>[ 560.259490] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 560.259704] cmt_speech cmt_speech: Unable to initialize HSI
- <7>[ 617.495178] twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- <7>[ 617.500274] twl4030_usb twl4030_usb: twl4030_phy_resume
- <7>[ 617.524322] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <3>[ 617.580444] DCD succeeded
- <3>[ 620.260925] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 620.261047] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 621.047424] gadget: No serial-number string provided!
- <6>[ 621.052917] gadget: File-backed Storage Gadget, version: 1 September 2010
- <6>[ 621.052917] gadget: NOTE: This driver is deprecated. Consider using g_mass_storage instead.
- <6>[ 621.052947] gadget: Number of LUNs=1
- <7>[ 621.074829] twl4030_usb twl4030_usb: twl4030_phy_resume
- <6>[ 621.509765] gadget: high-speed config #1
- <7>[ 677.205444] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <4>[ 677.285034] gadget: No serial-number string provided!
- <6>[ 677.295013] gadget: File-backed Storage Gadget, version: 1 September 2010
- <6>[ 677.295074] gadget: NOTE: This driver is deprecated. Consider using g_mass_storage instead.
- <6>[ 677.295104] gadget: Number of LUNs=1
- <7>[ 677.307861] twl4030_usb twl4030_usb: twl4030_phy_resume
- <6>[ 677.740905] gadget: high-speed config #1
- <7>[ 678.095855] twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>[ 678.097564] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <7>[ 679.291595] twl4030_usb twl4030_usb: twl4030_phy_resume
- <7>[ 679.293975] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <7>[ 679.321228] twl4030_usb twl4030_usb: twl4030_phy_resume
- <7>[ 679.323547] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <3>[ 680.262176] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 680.262298] cmt_speech cmt_speech: Unable to initialize HSI
- <6>[ 716.164794] wl12xx: Beacon loss detected.
- <6>[ 716.246643] wl12xx: Beacon regained.
- <6>[ 724.132080] wl12xx: Beacon regained.
- <6>[ 728.350219] wl12xx: Beacon loss detected.
- <6>[ 729.352355] wl12xx: Connection loss work.
- <7>[ 729.353607] wlan0: Connection to AP 00:24:01:c9:48:b6 lost.
- <6>[ 729.426605] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 729.513427] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <7>[ 732.802764] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 732.831451] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 733.030456] wlan0: send auth to 00:24:01:c9:48:b6 (try 2/3)
- <7>[ 733.233734] wlan0: send auth to 00:24:01:c9:48:b6 (try 3/3)
- <7>[ 733.436706] wlan0: authentication with 00:24:01:c9:48:b6 timed out
- <3>[ 740.263580] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 740.263824] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 742.118286] pvr: fingerterm: IOCTL 7 failed (1)
- <6>[ 748.217529] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <7>[ 751.493865] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 751.530609] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <6>[ 779.009185] wl12xx: Scan completed due to error.
- <6>[ 779.009704] wl12xx: Reading FW panic log
- <6>[ 779.011932] wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
- <6>[ 779.012023] wl12xx: down
- <6>[ 779.015441] ieee80211 phy0: Hardware restart was requested
- <6>[ 779.479644] wl12xx: firmware booted (Rev 6.3.5.0.98)
- <3>[ 800.265563] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 800.265808] cmt_speech cmt_speech: Unable to initialize HSI
- <7>[ 807.978851] twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- <7>[ 807.981567] twl4030_usb twl4030_usb: twl4030_phy_resume
- <7>[ 807.982971] twl4030_usb twl4030_usb: twl4030_phy_suspend
- <3>[ 808.192749] DCD succeeded
- <4>[ 810.074371] gadget: No serial-number string provided!
- <6>[ 810.076904] gadget: File-backed Storage Gadget, version: 1 September 2010
- <6>[ 810.076965] gadget: NOTE: This driver is deprecated. Consider using g_mass_storage instead.
- <6>[ 810.076965] gadget: Number of LUNs=1
- <3>[ 860.267730] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 860.267944] cmt_speech cmt_speech: Unable to initialize HSI
- <7>[ 902.206573] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 902.241424] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <3>[ 920.269866] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 920.270080] cmt_speech cmt_speech: Unable to initialize HSI
- <6>[ 931.007476] wl12xx: Scan completed due to error.
- <6>[ 931.007629] wl12xx: Reading FW panic log
- <6>[ 931.013671] wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
- <6>[ 931.013763] wl12xx: down
- <6>[ 931.019378] ieee80211 phy0: Hardware restart was requested
- <6>[ 931.493682] wl12xx: firmware booted (Rev 6.3.5.0.98)
- <7>[ 934.243225] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 934.280120] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <6>[ 961.632476] wl12xx: Scan completed due to error.
- <6>[ 961.632598] wl12xx: Reading FW panic log
- <6>[ 961.634521] wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
- <6>[ 961.634582] wl12xx: down
- <6>[ 961.636077] ieee80211 phy0: Hardware restart was requested
- <6>[ 962.143798] wl12xx: firmware booted (Rev 6.3.5.0.98)
- <7>[ 974.887817] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 974.928680] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <3>[ 980.271606] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 980.271881] cmt_speech cmt_speech: Unable to initialize HSI
- <6>[ 1003.132659] wl12xx: Scan completed due to error.
- <6>[ 1003.132812] wl12xx: Reading FW panic log
- <6>[ 1003.134704] wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
- <6>[ 1003.134765] wl12xx: down
- <6>[ 1003.136260] ieee80211 phy0: Hardware restart was requested
- <6>[ 1003.761230] wl12xx: firmware booted (Rev 6.3.5.0.98)
- <3>[ 1040.273956] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1040.274169] cmt_speech cmt_speech: Unable to initialize HSI
- <7>[ 1052.736999] wlan0: authenticate with 00:24:01:c9:48:b6
- <7>[ 1052.755889] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 1052.759735] wlan0: authenticated
- <7>[ 1052.783264] wlan0: associating with AP with corrupt beacon
- <7>[ 1052.788879] wlan0: associate with 00:24:01:c9:48:b6 (try 1/3)
- <7>[ 1052.793701] wlan0: RX AssocResp from 00:24:01:c9:48:b6 (capab=0xc31 status=0 aid=3)
- <6>[ 1052.940948] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <7>[ 1052.945037] wlan0: associated
- <6>[ 1053.859588] wl12xx: Association completed.
- <3>[ 1100.276062] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1100.276336] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 1160.278167] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1160.278442] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 1220.280364] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1220.280731] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 1280.282714] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1280.282958] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 1340.285003] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1340.285247] cmt_speech cmt_speech: Unable to initialize HSI
- <3>[ 1400.287231] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1400.287506] cmt_speech cmt_speech: Unable to initialize HSI
- <4>[ 1408.333282] pvr: fingerterm: IOCTL 7 failed (1)
- <3>[ 1460.289154] cmt_speech cmt_speech: HSI port not initialized
- <3>[ 1460.289398] cmt_speech cmt_speech: Unable to initialize HSI
- <7>[ 1482.568878] wlan0: deauthenticating from 00:24:01:c9:48:b6 by local choice (reason=3)
- <6>[ 1483.315826] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 1483.680694] wl12xx: down
- <6>[ 1484.044647] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <29>[ 1484.463287] systemd[1]: usb-moded.service: main process exited, code=exited, status=1
- <29>[ 1484.469146] systemd[1]: Unit usb-moded.service entered failed state.
- <29>[ 1484.581115] systemd[1]: Requested transaction contradicts existing jobs: Transaction is destructive.
- <28>[ 1484.581207] systemd[1]: usb-moded.service failed to schedule restart job: Transaction is destructive.
- <29>[ 1484.581726] systemd[1]: Unit usb-moded.service entered failed state.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement