Desktop PC dmesg

[21646.667074] usb 1-1.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[21646.667731] em28xx: New device   @ 480 Mbps (eb1a:2861, interface 0, class 0)
[21646.667739] em28xx: Video interface 0 found: isoc
[21646.667904] em28xx: chip ID is em2860
[21646.759147] em2860 #0: board has no eeprom
[21646.818747] em2860 #0: No sensor detected
[21646.835329] em2860 #0: found i2c device @ 0x4a on bus 0 [saa7113h]
[21646.875154] em2860 #0: Your board has no unique USB ID.
[21646.875158] em2860 #0: A hint were successfully done, based on i2c devicelist hash.
[21646.875159] em2860 #0: This method is not 100% failproof.
[21646.875161] em2860 #0: If the board were missdetected, please email this log to:
[21646.875162] em2860 #0:   V4L Mailing List  <linux-media@vger.kernel.org>
[21646.875163] em2860 #0: Board detected as EM2860/SAA711X Reference Design
[21646.954474] em2860 #0: Identified as EM2860/SAA711X Reference Design (card=19)
[21647.339045] saa7115 19-0025: saa7113 found @ 0x4a (em2860 #0)
[21648.106214] em2860 #0: Config register raw data: 0x10
[21648.130083] em2860 #0: AC97 vendor ID = 0x83847652
[21648.142081] em2860 #0: AC97 features = 0x6a90
[21648.142085] em2860 #0: Sigmatel audio processor detected(stac 9752)
[21648.613911] em2860 #0: v4l2 driver version 0.2.0
[21650.549499] em2860 #0: V4L2 video device registered as video1
[21650.549506] em2860 #0: V4L2 VBI device registered as vbi0
[21650.549511] em2860 #0: analog set to isoc mode.
[21650.549676] em28xx audio device (eb1a:2861): interface 1, class 1
[21650.549770] em2860 #0: Registering snapshot button...
[21650.549886] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.2/input/input22
[21650.550106] em2860 #0: Remote control support is not available for this card.