dmesg

pe=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 843776 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups
[ 0.000000] Memory: 412MB = 412MB total
[ 0.000000] Memory: 411112k/411112k available, 10776k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xda000000 - 0xff000000 ( 592 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd9c00000 ( 412 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc050daec (5143 kB)
[ 0.000000] .init : 0xc050e000 - 0xc052ee40 ( 132 kB)
[ 0.000000] .data : 0xc0530000 - 0xc05661a0 ( 217 kB)
[ 0.000000] .bss : 0xc05661c4 - 0xc060e8cc ( 674 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4 294967ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001056] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060137] pid_max: default: 32768 minimum: 301
[ 0.060468] Mount-cache hash table entries: 512
[ 0.061271] Initializing cgroup subsys cpuacct
[ 0.061332] Initializing cgroup subsys memory
[ 0.061410] Initializing cgroup subsys devices
[ 0.061446] Initializing cgroup subsys freezer
[ 0.061477] Initializing cgroup subsys blkio
[ 0.061586] CPU: Testing write buffer coherency: ok
[ 0.061947] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.062096] Setting up static identity map for 0x3ad718 - 0x3ad774
[ 0.063745] devtmpfs: initialized
[ 0.072572] NET: Registered protocol family 16
[ 0.077428] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.078629] bcm2708.uart_clock = 0
[ 0.080130] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.080308] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.080353] mailbox: Broadcom VideoCore Mailbox driver
[ 0.080460] bcm2708_vcio: mailbox at f200b880
[ 0.080565] bcm_power: Broadcom power driver
[ 0.080605] bcm_power_open() -> 0
[ 0.080632] bcm_power_request(0, 8)
[ 0.581318] bcm_mailbox_read -> 00000080, 0
[ 0.581360] bcm_power_request -> 0
[ 0.581387] Serial: AMBA PL011 UART driver
[ 0.581538] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.602037] bio: create slab <bio-0> at 0
[ 0.602983] SCSI subsystem initialized
[ 0.603247] usbcore: registered new interface driver usbfs
[ 0.603383] usbcore: registered new interface driver hub
[ 0.603688] usbcore: registered new device driver usb
[ 0.605086] Switching to clocksource stc
[ 0.605355] FS-Cache: Loaded
[ 0.605651] CacheFiles: Loaded
[ 0.618567] NET: Registered protocol family 2
[ 0.619438] TCP established hash table entries: 16384 (order: 5, 131072 bytes )
[ 0.620209] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.620646] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.620749] TCP: reno registered
[ 0.620798] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.620869] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.621260] NET: Registered protocol family 1
[ 0.621970] RPC: Registered named UNIX socket transport module.
[ 0.622033] RPC: Registered udp transport module.
[ 0.622064] RPC: Registered tcp transport module.
[ 0.622093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.622789] bcm2708_dma: DMA manager at f2007000
[ 0.622924] bcm2708_gpio: bcm2708_gpio_probe c053de68
[ 0.623321] vc-mem: phys_addr:0x00000000 mem_base=0x19c00000 mem_size:0x20000 000(512 MiB)
[ 0.624338] audit: initializing netlink socket (disabled)
[ 0.624443] type=2000 audit(0.600:1): initialized
[ 0.744500] VFS: Disk quotas dquot_6.5.2
[ 0.744642] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.745111] FS-Cache: Netfs 'nfs' registered for caching
[ 0.745644] NFS: Registering the id_resolver key type
[ 0.745775] Key type id_resolver registered
[ 0.745813] Key type id_legacy registered
[ 0.746209] msgmni has been set to 802
[ 0.748361] io scheduler noop registered
[ 0.748426] io scheduler deadline registered
[ 0.748483] io scheduler cfq registered (default)
[ 0.753780] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.753820] crc32: self tests passed, processed 225944 bytes in 2575000 nsec
[ 0.755924] crc32c: CRC_LE_BITS = 64
[ 0.755966] crc32c: self tests passed, processed 225944 bytes in 928000 nsec
[ 0.796421] Console: switching to colour frame buffer device 240x67
[ 0.834642] brd: module loaded
[ 0.840312] loop: module loaded
[ 0.840890] vcos: [1]: vchiq_init_state: slot_zero = 0xda004000, is_master = 0
[ 0.841656] vcos: [1]: vchiq_init_state: called
[ 0.842506] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
[ 0.843172] usbcore: registered new interface driver smsc95xx
[ 0.843578] usbcore: registered new interface driver cdc_ncm
[ 0.843787] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.049354] Core Release: 2.80a
[ 1.049496] Setting default values for core params
[ 1.049676] Finished setting default values for core params
[ 1.254966] Using Buffer DMA mode
[ 1.255102] Periodic Transfer Interrupt Enhancement - disabled
[ 1.255306] Multiprocessor Interrupt Enhancement - disabled
[ 1.255472] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.255603] Dedicated Tx FIFOs mode
[ 1.255936] dwc_otg: Microframe scheduler enabled
[ 1.255998] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.256212] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.256486] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.256716] Init: Port Power? op_state=1
[ 1.256834] Init: Power Port (0)
[ 1.257071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.257282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.257485] usb usb1: Product: DWC OTG Controller
[ 1.257626] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[ 1.257786] usb usb1: SerialNumber: bcm2708_usb
[ 1.258816] hub 1-0:1.0: USB hub found
[ 1.259004] hub 1-0:1.0: 1 port detected
[ 1.259478] dwc_otg: FIQ enabled
[ 1.259497] dwc_otg: NAK holdoff enabled
[ 1.259518] Module dwc_common_port init
[ 1.259770] Initializing USB Mass Storage driver...
[ 1.260165] usbcore: registered new interface driver usb-storage
[ 1.260342] USB Mass Storage support registered.
[ 1.260634] usbcore: registered new interface driver libusual
[ 1.268132] mousedev: PS/2 mouse device common for all mice
[ 1.276044] bcm2835-cpufreq: min=700000 max=900000 cur=700000
[ 1.276329] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq : switching to governor performance
[ 1.284506] cpuidle: using governor ladder
[ 1.295613] cpuidle: using governor menu
[ 1.301300] sdhci: Secure Digital Host Controller Interface driver
[ 1.307027] sdhci: Copyright© Pierre Ossman
[ 1.312793] sdhci: Enable low-latency mode
[ 1.318809] Registered led device: mmc0::
[ 1.355458] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platfor m's DMA
[ 1.361274] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.367309] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.378799] usbcore: registered new interface driver usbhid
[ 1.386687] usbhid: USB HID core driver
[ 1.397585] TCP: cubic registered
[ 1.405380] Initializing XFRM netlink socket
[ 1.413274] NET: Registered protocol family 17
[ 1.419260] Key type dns_resolver registered
[ 1.428445] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.435051] registered taskstats version 1
[ 1.441292] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.447592] Waiting for root device /dev/mmcblk0p2...
[ 1.455431] Indeed it is in host mode hprt0 = 00021501
[ 1.507188] mmc0: could read SD Status register (SSR) at the 3th attempt
[ 1.527278] mmc0: new high speed SDHC card at address 0002
[ 1.545483] mmcblk0: mmc0:0002 00000 14.9 GiB
[ 1.553216] mmcblk0: p1 p2
[ 1.685252] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.691254] Indeed it is in host mode hprt0 = 00001101
[ 1.851285] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
[ 1.857491] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.867298] devtmpfs: mounted
[ 1.873976] Freeing init memory: 128K
[ 1.975493] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.981501] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.988599] hub 1-1:1.0: USB hub found
[ 1.994644] hub 1-1:1.0: 3 ports detected
[ 2.275566] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.395690] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.401697] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 2.424868] smsc95xx v1.0.4
[ 2.489723] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cb:7b:0a
[ 2.595480] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 2.708040] usb 1-1.3: New USB device found, idVendor=0471, idProduct=0815
[ 2.718093] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[ 2.724422] usb 1-1.3: Product: eHome Infrared Transceiver
[ 2.734256] usb 1-1.3: Manufacturer: Philips
[ 2.740612] usb 1-1.3: SerialNumber: PH00WhqK
[ 3.216448] udevd[142]: starting version 175
[ 4.325260] Registered IR keymap rc-rc6-mce
[ 4.332135] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0 815) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
[ 4.586974] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:081 5) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0
[ 4.634804] IR NEC protocol handler initialized
[ 4.675748] IR RC5(x) protocol handler initialized
[ 4.723563] IR RC6 protocol handler initialized
[ 4.760923] IR JVC protocol handler initialized
[ 4.798513] IR Sony protocol handler initialized
[ 4.898948] IR SANYO protocol handler initialized
[ 4.940820] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/i nput1
[ 4.955590] IR MCE Keyboard/mouse protocol handler initialized
[ 4.991337] lirc_dev: IR Remote Control driver registered, major 250
[ 5.010432] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at min or = 0
[ 5.025314] IR LIRC bridge handler initialized
[ 5.145371] mceusb 1-1.3:1.0: Registered Philips eHome Infrared Transceiver w ith mce emulator interface version 1
[ 5.152358] mceusb 1-1.3:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 a ctive)
[ 5.304409] usbcore: registered new interface driver mceusb
[ 9.284399] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.742515] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.371898] bcm2835 ALSA card created!
[ 10.387562] bcm2835 ALSA chip created!
[ 10.402532] bcm2835 ALSA chip created!
[ 10.414286] bcm2835 ALSA chip created!
[ 10.426155] bcm2835 ALSA chip created!
[ 10.435569] bcm2835 ALSA chip created!
[ 10.444879] bcm2835 ALSA chip created!
[ 10.454274] bcm2835 ALSA chip created!
[ 17.352111] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 17.952423] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45 E1