Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.036475] ... value mask: 0000ffffffffffff
- [ 0.036476] ... max period: 0000ffffffffffff
- [ 0.036476] ... fixed-purpose events: 3
- [ 0.036477] ... event mask: 000000070000000f
- [ 0.042491] x86: Booting SMP configuration:
- [ 0.056469] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.042492] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
- [ 0.140373] x86: Booted up 1 node, 8 CPUs
- [ 0.140376] smpboot: Total of 8 processors activated (55967.29 BogoMIPS)
- [ 0.147051] devtmpfs: initialized
- [ 0.149161] EVM: security.selinux
- [ 0.149162] EVM: security.SMACK64
- [ 0.149163] EVM: security.ima
- [ 0.149163] EVM: security.capability
- [ 0.149187] PM: Registering ACPI NVS region [mem 0x86383000-0x86389fff] (28672 bytes)
- [ 0.149188] PM: Registering ACPI NVS region [mem 0x9d996000-0x9ded7fff] (5513216 bytes)
- [ 0.149699] pinctrl core: initialized pinctrl subsystem
- [ 0.149748] regulator-dummy: no parameters
- [ 0.149771] RTC time: 7:44:47, date: 05/28/14
- [ 0.149797] NET: Registered protocol family 16
- [ 0.149854] cpuidle: using governor ladder
- [ 0.149855] cpuidle: using governor menu
- [ 0.149875] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.149876] ACPI: bus type PCI registered
- [ 0.149877] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.149908] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
- [ 0.149910] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
- [ 0.159410] PCI: Using configuration type 1 for base access
- [ 0.160030] bio: create slab <bio-0> at 0
- [ 0.160167] ACPI: Added _OSI(Module Device)
- [ 0.160168] ACPI: Added _OSI(Processor Device)
- [ 0.160169] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.160170] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.163532] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.165523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.190116] ACPI: SSDT 000000009d972c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
- [ 0.190519] ACPI: Dynamic OEM Table Load:
- [ 0.190521] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
- [ 0.195217] ACPI: SSDT 000000009d972618 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
- [ 0.195669] ACPI: Dynamic OEM Table Load:
- [ 0.195670] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
- [ 0.200144] ACPI: SSDT 000000009d971d98 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
- [ 0.200547] ACPI: Dynamic OEM Table Load:
- [ 0.200548] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
- [ 0.206908] ACPI: Interpreter enabled
- [ 0.206912] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
- [ 0.206916] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
- [ 0.206927] ACPI: (supports S0 S3 S4 S5)
- [ 0.206928] ACPI: Using IOAPIC for interrupt routing
- [ 0.206943] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.207075] ACPI: No dock devices found.
- [ 0.212180] ACPI: Power Resource [FN00] (off)
- [ 0.212225] ACPI: Power Resource [FN01] (off)
- [ 0.212271] ACPI: Power Resource [FN02] (off)
- [ 0.212313] ACPI: Power Resource [FN03] (off)
- [ 0.212356] ACPI: Power Resource [FN04] (off)
- [ 0.212985] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
- [ 0.212988] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.213136] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
- [ 0.213219] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
- [ 0.213728] PCI host bridge to bus 0000:00
- [ 0.213730] pci_bus 0000:00: root bus resource [bus 00-7e]
- [ 0.213731] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.213732] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.213733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.213734] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.213735] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.213736] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.213737] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.213738] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
- [ 0.213743] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
- [ 0.213801] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.213825] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.213862] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.213897] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.213912] pci 0000:00:14.0: reg 0x10: [mem 0xec420000-0xec42ffff 64bit]
- [ 0.213962] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.213992] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.214011] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.214027] pci 0000:00:16.0: reg 0x10: [mem 0xec437000-0xec43700f 64bit]
- [ 0.214080] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.214131] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
- [ 0.214147] pci 0000:00:19.0: reg 0x10: [mem 0xec400000-0xec41ffff]
- [ 0.214154] pci 0000:00:19.0: reg 0x14: [mem 0xec435000-0xec435fff]
- [ 0.214160] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
- [ 0.214209] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.214240] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.214262] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.214279] pci 0000:00:1a.0: reg 0x10: [mem 0xec434000-0xec4343ff]
- [ 0.214354] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.214395] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.214414] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.214466] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.214499] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.214515] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
- [ 0.214697] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.214730] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.214748] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
- [ 0.214800] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.214833] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.214848] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
- [ 0.214901] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.214933] pci 0000:00:1c.4: System wakeup disabled by ACPI
- [ 0.214956] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.214973] pci 0000:00:1d.0: reg 0x10: [mem 0xec433000-0xec4333ff]
- [ 0.215050] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.215089] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.215111] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
- [ 0.215244] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- [ 0.215256] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
- [ 0.215262] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
- [ 0.215268] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
- [ 0.215273] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
- [ 0.215279] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
- [ 0.215284] pci 0000:00:1f.2: reg 0x24: [mem 0xec432000-0xec4327ff]
- [ 0.215314] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.215356] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.215367] pci 0000:00:1f.3: reg 0x10: [mem 0xec431000-0xec4310ff 64bit]
- [ 0.215383] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
- [ 0.215464] pci 0000:01:00.0: [10de:1184] type 00 class 0x030000
- [ 0.215472] pci 0000:01:00.0: reg 0x10: [mem 0xeb000000-0xebffffff]
- [ 0.215481] pci 0000:01:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
- [ 0.215490] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- [ 0.215496] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
- [ 0.215502] pci 0000:01:00.0: reg 0x30: [mem 0xec000000-0xec07ffff pref]
- [ 0.215674] pci 0000:01:00.0: System wakeup disabled by ACPI
- [ 0.215695] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
- [ 0.215703] pci 0000:01:00.1: reg 0x10: [mem 0xec080000-0xec083fff]
- [ 0.217151] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.217153] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.217155] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff]
- [ 0.217157] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
- [ 0.217203] acpiphp: Slot [1] registered
- [ 0.217206] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.217270] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.217283] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
- [ 0.217293] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
- [ 0.217303] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
- [ 0.217312] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
- [ 0.217322] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
- [ 0.217332] pci 0000:03:00.0: reg 0x24: [mem 0xec300000-0xec3001ff]
- [ 0.217402] pci 0000:03:00.0: System wakeup disabled by ACPI
- [ 0.219382] pci 0000:00:1c.1: PCI bridge to [bus 03]
- [ 0.219384] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.219387] pci 0000:00:1c.1: bridge window [mem 0xec300000-0xec3fffff]
- [ 0.219447] pci 0000:04:00.0: [10b5:8605] type 01 class 0x060400
- [ 0.219464] pci 0000:04:00.0: reg 0x10: [mem 0xec200000-0xec203fff]
- [ 0.219563] pci 0000:04:00.0: supports D1 D2
- [ 0.219564] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.221407] pci 0000:00:1c.3: PCI bridge to [bus 04-08]
- [ 0.221411] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec2fffff]
- [ 0.221505] pci 0000:05:01.0: [10b5:8605] type 01 class 0x060400
- [ 0.221621] pci 0000:05:01.0: supports D1 D2
- [ 0.221622] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.221679] pci 0000:05:02.0: [10b5:8605] type 01 class 0x060400
- [ 0.221796] pci 0000:05:02.0: supports D1 D2
- [ 0.221797] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.221854] pci 0000:05:03.0: [10b5:8605] type 01 class 0x060400
- [ 0.221971] pci 0000:05:03.0: supports D1 D2
- [ 0.221972] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.222052] pci 0000:04:00.0: PCI bridge to [bus 05-08]
- [ 0.222062] pci 0000:04:00.0: bridge window [mem 0xec100000-0xec1fffff]
- [ 0.222130] pci 0000:05:01.0: PCI bridge to [bus 06]
- [ 0.222209] pci 0000:05:02.0: PCI bridge to [bus 07]
- [ 0.222312] pci 0000:08:00.0: [168c:0034] type 00 class 0x028000
- [ 0.222340] pci 0000:08:00.0: reg 0x10: [mem 0xec100000-0xec17ffff 64bit]
- [ 0.222397] pci 0000:08:00.0: reg 0x30: [mem 0xec180000-0xec18ffff pref]
- [ 0.222479] pci 0000:08:00.0: supports D1 D2
- [ 0.222480] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.224420] pci 0000:05:03.0: PCI bridge to [bus 08]
- [ 0.224430] pci 0000:05:03.0: bridge window [mem 0xec100000-0xec1fffff]
- [ 0.224511] acpiphp: Slot [1-1] registered
- [ 0.224515] pci 0000:00:1c.4: PCI bridge to [bus 09-41]
- [ 0.224518] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff]
- [ 0.224522] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
- [ 0.224557] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- [ 0.225062] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.225095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.225126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
- [ 0.225156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.225188] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.225220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 0.225250] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.225281] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- [ 0.225591] ACPI: Enabled 6 GPEs in block 00 to 3F
- [ 0.225595] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.225647] Found 1 acpi root devices
- [ 0.225696] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.225697] vgaarb: loaded
- [ 0.225698] vgaarb: bridge control possible 0000:01:00.0
- [ 0.225786] SCSI subsystem initialized
- [ 0.225816] libata version 3.00 loaded.
- [ 0.225837] ACPI: bus type USB registered
- [ 0.225845] usbcore: registered new interface driver usbfs
- [ 0.225849] usbcore: registered new interface driver hub
- [ 0.225860] usbcore: registered new device driver usb
- [ 0.225932] PCI: Using ACPI for IRQ routing
- [ 0.228299] PCI: pci_cache_line_size set to 64 bytes
- [ 0.228350] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
- [ 0.228351] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
- [ 0.228352] e820: reserve RAM buffer [mem 0x86383000-0x87ffffff]
- [ 0.228353] e820: reserve RAM buffer [mem 0x867d8000-0x87ffffff]
- [ 0.228354] e820: reserve RAM buffer [mem 0x9d774000-0x9fffffff]
- [ 0.228355] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
- [ 0.228355] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff]
- [ 0.228408] NetLabel: Initializing
- [ 0.228409] NetLabel: domain hash size = 128
- [ 0.228409] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.228419] NetLabel: unlabeled traffic allowed by default
- [ 0.228449] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.228452] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.230488] Switched to clocksource hpet
- [ 0.233737] AppArmor: AppArmor Filesystem Enabled
- [ 0.233746] pnp: PnP ACPI init
- [ 0.233753] ACPI: bus type PNP registered
- [ 0.233789] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.233790] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.233797] pnp 00:01: [dma 4]
- [ 0.233804] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.233813] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.233870] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.233895] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.233962] system 00:05: [io 0x0680-0x069f] has been reserved
- [ 0.233963] system 00:05: [io 0xffff] has been reserved
- [ 0.233964] system 00:05: [io 0xffff] has been reserved
- [ 0.233965] system 00:05: [io 0xffff] has been reserved
- [ 0.233966] system 00:05: [io 0x1c00-0x1cfe] has been reserved
- [ 0.233967] system 00:05: [io 0x1d00-0x1dfe] has been reserved
- [ 0.233968] system 00:05: [io 0x1e00-0x1efe] has been reserved
- [ 0.233969] system 00:05: [io 0x1f00-0x1ffe] has been reserved
- [ 0.233971] system 00:05: [io 0x1800-0x18fe] could not be reserved
- [ 0.233972] system 00:05: [io 0x164e-0x164f] has been reserved
- [ 0.233973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.233985] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.234011] system 00:07: [io 0x1854-0x1857] has been reserved
- [ 0.234012] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.234057] system 00:08: [io 0x0290-0x029f] has been reserved
- [ 0.234058] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.234083] system 00:09: [io 0x04d0-0x04d1] has been reserved
- [ 0.234084] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.234357] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.234358] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.234360] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.234361] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.234362] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved
- [ 0.234363] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.234364] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.234365] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.234366] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.234368] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.234369] system 00:0a: [mem 0xeffdf000-0xeffdffff] has been reserved
- [ 0.234370] system 00:0a: [mem 0xeffe0000-0xeffeffff] has been reserved
- [ 0.234371] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.234512] pnp: PnP ACPI: found 11 devices
- [ 0.234513] ACPI: bus type PNP unregistered
- [ 0.239690] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 09-41] add_size 1000
- [ 0.239693] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.239695] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
- [ 0.239696] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.239697] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.239700] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff]
- [ 0.239701] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
- [ 0.239704] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.239712] pci 0000:00:1c.1: PCI bridge to [bus 03]
- [ 0.239713] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.239717] pci 0000:00:1c.1: bridge window [mem 0xec300000-0xec3fffff]
- [ 0.239722] pci 0000:05:01.0: PCI bridge to [bus 06]
- [ 0.239737] pci 0000:05:02.0: PCI bridge to [bus 07]
- [ 0.239753] pci 0000:05:03.0: PCI bridge to [bus 08]
- [ 0.239759] pci 0000:05:03.0: bridge window [mem 0xec100000-0xec1fffff]
- [ 0.239769] pci 0000:04:00.0: PCI bridge to [bus 05-08]
- [ 0.239775] pci 0000:04:00.0: bridge window [mem 0xec100000-0xec1fffff]
- [ 0.239785] pci 0000:00:1c.3: PCI bridge to [bus 04-08]
- [ 0.239789] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec2fffff]
- [ 0.239794] pci 0000:00:1c.4: PCI bridge to [bus 09-41]
- [ 0.239796] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
- [ 0.239799] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff]
- [ 0.239801] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
- [ 0.239805] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.239806] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.239808] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.239808] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.239809] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.239810] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.239811] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.239812] pci_bus 0000:00: resource 11 [mem 0xa0000000-0xfeafffff]
- [ 0.239813] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.239814] pci_bus 0000:01: resource 1 [mem 0xeb000000-0xec0fffff]
- [ 0.239815] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xd1ffffff 64bit pref]
- [ 0.239816] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.239817] pci_bus 0000:03: resource 1 [mem 0xec300000-0xec3fffff]
- [ 0.239818] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec2fffff]
- [ 0.239819] pci_bus 0000:05: resource 1 [mem 0xec100000-0xec1fffff]
- [ 0.239820] pci_bus 0000:08: resource 1 [mem 0xec100000-0xec1fffff]
- [ 0.239821] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
- [ 0.239822] pci_bus 0000:09: resource 1 [mem 0xd4000000-0xea0fffff]
- [ 0.239823] pci_bus 0000:09: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
- [ 0.239839] NET: Registered protocol family 2
- [ 0.239944] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.240085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.240182] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.240192] TCP: reno registered
- [ 0.240205] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.240242] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.240299] NET: Registered protocol family 1
- [ 0.255576] PCI: CLS mismatch (64 != 128), using 64 bytes
- [ 0.270593] pci 0000:01:00.0: Boot video device
- [ 0.270626] Trying to unpack rootfs image as initramfs...
- [ 0.440950] Freeing initrd memory: 15864K (ffff8800360f4000 - ffff880037072000)
- [ 0.440953] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.440955] software IO TLB [mem 0x8b97b000-0x8f97b000] (64MB) mapped at [ffff88008b97b000-ffff88008f97afff]
- [ 0.441112] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441115] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441118] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441123] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441127] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441131] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441135] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441139] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x12
- [ 0.441168] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.441170] Scanning for low memory corruption every 60 seconds
- [ 0.441319] Initialise system trusted keyring
- [ 0.441343] audit: initializing netlink socket (disabled)
- [ 0.441350] type=2000 audit(1401263087.421:1): initialized
- [ 0.454803] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.455688] VFS: Disk quotas dquot_6.5.2
- [ 0.455709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.455916] fuse init (API version 7.22)
- [ 0.455947] msgmni has been set to 31970
- [ 0.455977] Key type big_key registered
- [ 0.456121] Key type asymmetric registered
- [ 0.456122] Asymmetric key parser 'x509' registered
- [ 0.456144] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.456174] io scheduler noop registered
- [ 0.456176] io scheduler deadline registered
- [ 0.456193] io scheduler cfq registered
- [ 0.456196] io scheduler bfq registered (default)
- [ 0.456197] BFQ I/O-scheduler version: v7
- [ 0.456325] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.456675] pcieport 0000:04:00.0: irq 41 for MSI/MSI-X
- [ 0.456802] pcieport 0000:05:01.0: irq 42 for MSI/MSI-X
- [ 0.456925] pcieport 0000:05:02.0: irq 43 for MSI/MSI-X
- [ 0.457045] pcieport 0000:05:03.0: irq 44 for MSI/MSI-X
- [ 0.457124] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.457131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.457155] efifb: probing for efifb
- [ 0.457758] efifb: framebuffer at 0xd1000000, mapped to 0xffffc90009c00000, using 7552k, total 7552k
- [ 0.457759] efifb: mode is 1600x1200x32, linelength=6400, pages=1
- [ 0.457760] efifb: scrolling: redraw
- [ 0.457761] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.460458] Console: switching to colour frame buffer device 200x75
- [ 0.463075] fb0: EFI VGA frame buffer device
- [ 0.463082] intel_idle: MWAIT substates: 0x42120
- [ 0.463083] intel_idle: v0.4 model 0x3C
- [ 0.463084] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.463193] ipmi message handler version 39.2
- [ 0.463233] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.463236] ACPI: Power Button [PWRB]
- [ 0.463255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.463257] ACPI: Power Button [PWRF]
- [ 0.463291] ACPI: Fan [FAN0] (off)
- [ 0.463304] ACPI: Fan [FAN1] (off)
- [ 0.463317] ACPI: Fan [FAN2] (off)
- [ 0.463328] ACPI: Fan [FAN3] (off)
- [ 0.463341] ACPI: Fan [FAN4] (off)
- [ 0.463605] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.463606] ACPI: Thermal Zone [TZ00] (28 C)
- [ 0.463741] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.463742] ACPI: Thermal Zone [TZ01] (30 C)
- [ 0.463758] GHES: HEST is not enabled!
- [ 0.463803] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.464425] Linux agpgart interface v0.103
- [ 0.465023] brd: module loaded
- [ 0.465318] loop: module loaded
- [ 0.465505] libphy: Fixed MDIO Bus: probed
- [ 0.465547] tun: Universal TUN/TAP device driver, 1.6
- [ 0.465548] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.465563] PPP generic driver version 2.4.2
- [ 0.465579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.465582] ehci-pci: EHCI PCI platform driver
- [ 0.465655] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.465659] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.465669] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.469576] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.469587] ehci-pci 0000:00:1a.0: irq 16, io mem 0xec434000
- [ 0.474705] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.474732] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.474734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.474735] usb usb1: Product: EHCI Host Controller
- [ 0.474736] usb usb1: Manufacturer: Linux 3.13.9-bf ehci_hcd
- [ 0.474737] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.474788] hub 1-0:1.0: USB hub found
- [ 0.474791] hub 1-0:1.0: 2 ports detected
- [ 0.474913] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.474915] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.474924] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.478830] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.478840] ehci-pci 0000:00:1d.0: irq 23, io mem 0xec433000
- [ 0.484716] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.484738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.484739] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.484740] usb usb2: Product: EHCI Host Controller
- [ 0.484741] usb usb2: Manufacturer: Linux 3.13.9-bf ehci_hcd
- [ 0.484742] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.484786] hub 2-0:1.0: USB hub found
- [ 0.484789] hub 2-0:1.0: 2 ports detected
- [ 0.484851] ehci-platform: EHCI generic platform driver
- [ 0.484855] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.484856] ohci-pci: OHCI PCI platform driver
- [ 0.484861] ohci-platform: OHCI generic platform driver
- [ 0.484864] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.484931] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.484934] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 0.485000] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.485012] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
- [ 0.485051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.485052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.485053] usb usb3: Product: xHCI Host Controller
- [ 0.485054] usb usb3: Manufacturer: Linux 3.13.9-bf xhci_hcd
- [ 0.485055] usb usb3: SerialNumber: 0000:00:14.0
- [ 0.485101] hub 3-0:1.0: USB hub found
- [ 0.485114] hub 3-0:1.0: 14 ports detected
- [ 0.487438] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.487439] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 0.487470] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.487471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.487472] usb usb4: Product: xHCI Host Controller
- [ 0.487473] usb usb4: Manufacturer: Linux 3.13.9-bf xhci_hcd
- [ 0.487474] usb usb4: SerialNumber: 0000:00:14.0
- [ 0.487514] hub 4-0:1.0: USB hub found
- [ 0.487524] hub 4-0:1.0: 6 ports detected
- [ 0.501754] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.504185] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.504192] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.504229] mousedev: PS/2 mouse device common for all mice
- [ 0.504282] rtc_cmos 00:06: RTC can wake from S4
- [ 0.504367] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 0.504389] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.504421] device-mapper: uevent: version 1.0.3
- [ 0.504445] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 0.504448] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.504449] EFI Variables Facility v0.08 2004-May-17
- [ 0.507666] TCP: cubic registered
- [ 0.507717] NET: Registered protocol family 10
- [ 0.507818] NET: Registered protocol family 17
- [ 0.507825] Key type dns_resolver registered
- [ 0.507960] Loading compiled-in X.509 certificates
- [ 0.508459] Loaded X.509 cert 'Magrathea: Glacier signing key: 5cd6ffe4c03170004e441e62d0dc622fd5138a54'
- [ 0.508471] registered taskstats version 1
- [ 0.509796] Key type trusted registered
- [ 0.510645] Key type encrypted registered
- [ 0.511519] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.511521] IMA: No TPM chip found, activating TPM-bypass!
- [ 0.511914] regulator-dummy: disabling
- [ 0.511928] Magic number: 14:522:724
- [ 0.511933] block loop4: hash matches
- [ 0.512023] rtc_cmos 00:06: setting system clock to 2014-05-28 07:44:47 UTC (1401263087)
- [ 0.512906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.512907] EDD information not available.
- [ 0.512950] PM: Hibernation image not present or could not be loaded.
- [ 0.513510] Freeing unused kernel memory: 1312K (ffffffff81d19000 - ffffffff81e61000)
- [ 0.513511] Write protecting the kernel read-only data: 12288k
- [ 0.514886] Freeing unused kernel memory: 928K (ffff880002718000 - ffff880002800000)
- [ 0.515900] Freeing unused kernel memory: 744K (ffff880002b46000 - ffff880002c00000)
- [ 0.515901] BFS CPU scheduler v0.446 by Con Kolivas.
- [ 0.521501] systemd-udevd[127]: starting version 204
- [ 0.531926] pps_core: module verification failed: signature and/or required key missing - tainting kernel
- [ 0.532098] pps_core: LinuxPPS API ver. 1 registered
- [ 0.532100] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.532317] PTP clock support registered
- [ 0.532610] ahci 0000:00:1f.2: version 3.0
- [ 0.532728] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
- [ 0.532778] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
- [ 0.532781] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
- [ 0.532904] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 0.532905] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 0.535408] scsi0 : ahci
- [ 0.535484] scsi1 : ahci
- [ 0.535545] scsi2 : ahci
- [ 0.535619] scsi3 : ahci
- [ 0.535677] scsi4 : ahci
- [ 0.535747] scsi5 : ahci
- [ 0.535807] ata1: SATA max UDMA/133 abar m2048@0xec432000 port 0xec432100 irq 46
- [ 0.535809] ata2: DUMMY
- [ 0.535811] ata3: SATA max UDMA/133 abar m2048@0xec432000 port 0xec432200 irq 46
- [ 0.535812] ata4: DUMMY
- [ 0.535813] ata5: DUMMY
- [ 0.535814] ata6: DUMMY
- [ 0.535904] ahci 0000:03:00.0: irq 47 for MSI/MSI-X
- [ 0.535942] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
- [ 0.535990] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.535992] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
- [ 0.536014] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 0.536031] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
- [ 0.536208] scsi6 : ahci
- [ 0.536260] scsi7 : ahci
- [ 0.536309] ata7: SATA max UDMA/133 abar m512@0xec300000 port 0xec300100 irq 47
- [ 0.536312] ata8: SATA max UDMA/133 abar m512@0xec300000 port 0xec300180 irq 47
- [ 0.703017] e1000e 0000:00:19.0 eth0: registered PHC clock
- [ 0.703019] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:3f:51:fb
- [ 0.703020] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 0.703055] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
- [ 0.718007] systemd-udevd[129]: renamed network interface eth0 to em1
- [ 0.777008] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.841067] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.841080] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.841101] ata7: SATA link down (SStatus 0 SControl 300)
- [ 0.842964] ata3.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
- [ 0.842966] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.842982] ata1.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
- [ 0.842983] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.843923] ata1.00: configured for UDMA/133
- [ 0.843994] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
- [ 0.844075] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.844087] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 0.844089] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 0.844149] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.844151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.844159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.852930] ata3.00: configured for UDMA/133
- [ 0.852991] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
- [ 0.853069] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 0.853073] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 0.853153] sd 2:0:0:0: [sdb] Write Protect is off
- [ 0.853155] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.853162] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.853420] sda: sda1 sda2 sda3
- [ 0.853572] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.853923] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
- [ 0.854095] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 0.891521] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 0.891523] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.891651] hub 1-1:1.0: USB hub found
- [ 0.891770] hub 1-1:1.0: 6 ports detected
- [ 0.952635] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
- [ 0.994172] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.108736] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 1.108739] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.108893] hub 2-1:1.0: USB hub found
- [ 1.108985] hub 2-1:1.0: 8 ports detected
- [ 1.158357] ata8: SATA link down (SStatus 0 SControl 300)
- [ 1.303084] random: nonblocking pool is initialized
- [ 1.365529] usb 3-3: new high-speed USB device number 3 using xhci_hcd
- [ 1.378483] usb 3-3: New USB device found, idVendor=174c, idProduct=2074
- [ 1.378485] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 1.378486] usb 3-3: Product: ASM107x
- [ 1.378487] usb 3-3: Manufacturer: Asmedia
- [ 1.378488] usb 3-3: SerialNumber: 00000000A001
- [ 1.378780] hub 3-3:1.0: USB hub found
- [ 1.378942] hub 3-3:1.0: 4 ports detected
- [ 1.442593] tsc: Refined TSC clocksource calibration: 3497.972 MHz
- [ 1.451354] init: plymouth-upstart-bridge main process (205) terminated with status 1
- [ 1.451360] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.452699] init: plymouth-upstart-bridge main process (214) terminated with status 1
- [ 1.452705] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.453620] init: plymouth-upstart-bridge main process (216) terminated with status 1
- [ 1.453626] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.454555] init: plymouth-upstart-bridge main process (217) terminated with status 1
- [ 1.454561] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.455516] init: plymouth-upstart-bridge main process (218) terminated with status 1
- [ 1.455521] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.481422] init: plymouth-upstart-bridge main process (219) terminated with status 1
- [ 1.481428] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.482756] init: plymouth-upstart-bridge main process (226) terminated with status 1
- [ 1.482762] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.483612] init: plymouth-upstart-bridge main process (228) terminated with status 1
- [ 1.483617] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.484453] init: plymouth-upstart-bridge main process (229) terminated with status 1
- [ 1.484458] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.485298] init: plymouth-upstart-bridge main process (230) terminated with status 1
- [ 1.485303] init: plymouth-upstart-bridge main process ended, respawning
- [ 1.486184] init: plymouth-upstart-bridge main process (231) terminated with status 1
- [ 1.486190] init: plymouth-upstart-bridge respawning too fast, stopped
- [ 1.532676] usb 3-4: new full-speed USB device number 4 using xhci_hcd
- [ 1.545182] usb 3-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
- [ 1.547016] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0
- [ 1.547018] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.753950] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
- [ 1.765275] usb 4-2: New USB device found, idVendor=8564, idProduct=1000
- [ 1.765277] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.765278] usb 4-2: Product: Mass Storage Device
- [ 1.765279] usb 4-2: Manufacturer: JetFlash
- [ 1.765280] usb 4-2: SerialNumber: 1215485291
- [ 1.971167] usb 4-3: new SuperSpeed USB device number 3 using xhci_hcd
- [ 1.983895] usb 4-3: New USB device found, idVendor=174c, idProduct=3074
- [ 1.983897] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 1.983898] usb 4-3: Product: ASM107x
- [ 1.983899] usb 4-3: Manufacturer: Asmedia
- [ 1.983900] usb 4-3: SerialNumber: 00000000A001
- [ 1.984747] hub 4-3:1.0: USB hub found
- [ 1.984873] hub 4-3:1.0: 4 ports detected
- [ 2.169308] usb 3-3.1: new high-speed USB device number 5 using xhci_hcd
- [ 2.180348] usb 3-3.1: New USB device found, idVendor=0424, idProduct=2504
- [ 2.180350] usb 3-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.180655] hub 3-3.1:1.0: USB hub found
- [ 2.180680] hub 3-3.1:1.0: 4 ports detected
- [ 2.394437] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
- [ 2.401789] systemd-udevd[363]: starting version 204
- [ 2.443507] Switched to clocksource tsc
- [ 2.454485] usb 3-3.1.1: new full-speed USB device number 6 using xhci_hcd
- [ 2.454559] usb 3-3.1.1: Device not responding to set address.
- [ 2.515117] kvm: module has bad taint, not creating trace events
- [ 2.542424] lp: driver loaded but no devices found
- [ 2.618142] ppdev: user-space parallel port driver
- [ 2.655746] usb 3-3.1.1: Device not responding to set address.
- [ 2.856836] usb 3-3.1.1: device not accepting address 6, error -71
- [ 2.856892] hub 3-3.1:1.0: cannot disable port 1 (err = -71)
- [ 2.856968] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857048] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857128] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857208] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857288] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857301] hub 3-3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
- [ 2.857368] hub 3-3.1:1.0: cannot disable port 1 (err = -71)
- [ 2.857448] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857528] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857608] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857688] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857768] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.857781] hub 3-3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
- [ 2.857849] hub 3-3.1:1.0: cannot disable port 1 (err = -71)
- [ 2.857928] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.858008] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.858088] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.858168] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.858248] hub 3-3.1:1.0: cannot reset port 1 (err = -71)
- [ 2.858262] hub 3-3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
- [ 2.858329] hub 3-3.1:1.0: cannot disable port 1 (err = -71)
- [ 2.858345] hub 3-3.1:1.0: unable to enumerate USB device on port 1
- [ 2.858409] hub 3-3.1:1.0: cannot disable port 1 (err = -71)
- [ 2.858489] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.858649] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.858729] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.858819] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.858889] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.858969] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859129] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859209] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859291] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859371] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859450] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859610] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859690] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859770] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859851] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.859934] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860094] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860174] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860253] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860334] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860414] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860574] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860653] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860731] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860811] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.860891] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861088] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861144] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861224] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861302] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861382] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861542] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861622] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861702] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861782] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.861862] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862022] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862102] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862183] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862263] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862343] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862503] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862583] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862663] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862741] xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
- [ 2.862745] hub 3-3.1:1.0: hub_port_status failed (err = 0)
- [ 2.862824] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.862983] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.863063] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.863143] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.863401] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.863651] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.864042] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.864276] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.864515] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.864749] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.864990] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.865373] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.865583] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.865787] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.865990] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.866192] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.866538] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.866739] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.866941] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.867134] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.867334] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.867664] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.867848] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.868032] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.868216] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.868404] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.868726] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.868910] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.869074] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.869241] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.869403] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.869703] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.869860] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870020] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870175] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870339] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870645] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870805] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.870967] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.871129] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.871292] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.871598] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.871760] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.871922] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.872084] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.872248] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.872555] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.872716] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.872881] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.873043] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.873208] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.873517] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.873679] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.873841] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874003] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874168] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874477] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874639] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874802] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.874966] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.875131] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.875442] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.875605] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.875769] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.875933] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.876101] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.876411] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.876576] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.876740] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.876912] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.877082] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.877393] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.877559] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.877724] xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
- [ 2.877727] hub 3-3.1:1.0: hub_port_status failed (err = 0)
- [ 2.877896] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.878065] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.878377] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.878543] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.878709] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.878877] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.879045] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.879357] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.879528] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.879695] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.879862] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.880034] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.880347] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.880514] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.880681] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.880849] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.881017] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.881331] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.881499] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.881668] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.881835] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882005] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882319] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882486] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882656] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882822] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.882992] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.883304] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.883473] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.883641] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.883808] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.883979] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.884292] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.884460] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.884628] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.884796] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.884973] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.885292] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.885459] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.885626] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.885794] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.885965] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.886277] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.886444] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.886611] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.886777] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.886948] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.887260] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.887427] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.887594] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.887761] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.887932] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.888244] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.888416] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.888582] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.888749] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.888922] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.889234] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.889402] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.889568] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.889736] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.889906] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.890218] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.890385] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.890552] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.890719] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.890890] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.891203] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.891370] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.891539] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.891706] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.891877] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.892190] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.892356] xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
- [ 2.892360] hub 3-3.1:1.0: hub_port_status failed (err = 0)
- [ 2.892527] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.892694] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.892865] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.893177] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.893344] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.893511] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.893678] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.893847] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.894160] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.894327] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.894494] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.894660] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.894829] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.895143] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.895310] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.895477] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.895644] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.895812] hub 3-3.1:1.0: hub_port_status failed (err = -71)
- [ 2.896045] xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
- [ 2.957855] wmi: Mapper loaded
- [ 3.061551] asus_wmi: ASUS WMI generic driver loaded
- [ 3.062104] asus_wmi: Initialization: 0x0
- [ 3.062119] asus_wmi: BIOS WMI version: 0.9
- [ 3.062142] asus_wmi: SFUN value: 0x0
- [ 3.062328] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
- [ 3.062843] asus_wmi: Disabling ACPI video driver
- [ 3.175687] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
- [ 3.175693] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.175696] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
- [ 3.175699] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
- [ 3.175702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.175703] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
- [ 3.175706] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
- [ 3.175708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.175710] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 3.428054] drm: module has bad taint, not creating trace events
- [ 3.428528] [drm] Initialized drm 1.1.0 20060810
- [ 3.470828] usb-storage 4-2:1.0: USB Mass Storage device detected
- [ 3.470849] scsi8 : usb-storage 4-2:1.0
- [ 3.471106] usbcore: registered new interface driver usb-storage
- [ 3.472583] Bluetooth: Core ver 2.17
- [ 3.472592] NET: Registered protocol family 31
- [ 3.472593] Bluetooth: HCI device and connection manager initialized
- [ 3.472599] Bluetooth: HCI socket layer initialized
- [ 3.472600] Bluetooth: L2CAP socket layer initialized
- [ 3.472602] Bluetooth: SCO socket layer initialized
- [ 3.545940] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
- [ 3.630622] nvidia: module license 'NVIDIA' taints kernel.
- [ 3.630624] Disabling lock debugging due to kernel taint
- [ 3.635620] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
- [ 3.635729] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 3.635736] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
- [ 3.646553] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
- [ 3.646631] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
- [ 3.710105] usbcore: registered new interface driver btusb
- [ 3.738256] cfg80211: module has bad taint, not creating trace events
- [ 3.738620] cfg80211: Calling CRDA to update world regulatory domain
- [ 3.742600] mac80211: module has bad taint, not creating trace events
- [ 3.747039] ath9k 0000:08:00.0: enabling device (0000 -> 0002)
- [ 3.758195] ath: EEPROM regdomain: 0x60
- [ 3.758196] ath: EEPROM indicates we should expect a direct regpair map
- [ 3.758197] ath: Country alpha2 being used: 00
- [ 3.758198] ath: Regpair used: 0x60
- [ 3.778368] cfg80211: World regulatory domain updated:
- [ 3.778369] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3.778370] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3.778371] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3.778372] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3.778373] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3.778374] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3.780704] snd_hda_codec: module has bad taint, not creating trace events
- [ 3.781553] snd_hda_intel: module has bad taint, not creating trace events
- [ 3.781811] hda_intel: Disabling MSI
- [ 3.781815] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 3.781839] hda-intel 0000:01:00.1: Disabling 64bit DMA
- [ 3.785081] hda-intel 0000:01:00.1: Enable delay in RIRB handling
- [ 3.805479] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
- [ 3.805521] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 3.805702] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc9000a480000, irq=18
- [ 3.959841] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input9
- [ 3.959888] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
- [ 3.959920] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
- [ 3.959945] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
- [ 4.007119] init: udev-fallback-graphics main process (612) terminated with status 1
- [ 4.473978] scsi 8:0:0:0: Direct-Access JetFlash Transcend 8GB 1.00 PQ: 0 ANSI: 6
- [ 4.489371] sd 8:0:0:0: Attached scsi generic sg2 type 0
- [ 4.490039] sd 8:0:0:0: [sdc] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB)
- [ 4.490155] sd 8:0:0:0: [sdc] Write Protect is off
- [ 4.490156] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
- [ 4.490284] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
- [ 4.491370] sdc: sdc1
- [ 4.492085] sd 8:0:0:0: [sdc] Attached SCSI removable disk
- [ 4.663778] EXT4-fs (sdb6): re-mounted. Opts: discard,errors=remount-ro
- [ 4.756207] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.172443] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- [ 5.172447] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
- [ 5.172482] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
- [ 5.520879] init: cups main process (766) killed by HUP signal
- [ 5.520884] init: cups main process ended, respawning
- [ 6.316903] init: failsafe main process (689) killed by TERM signal
- [ 7.287021] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
- [ 7.623474] init: plymouth-stop pre-start process (1144) terminated with status 1
- [ 7.843770] NVRM: Your system is not currently configured to drive a VGA console
- [ 7.843774] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
- [ 7.843775] NVRM: requires the use of a text-mode VGA console. Use of other console
- [ 7.843777] NVRM: drivers including, but not limited to, vesafb, may result in
- [ 7.843778] NVRM: corruption and stability problems, and is not supported.
- [ 16.934971] init: nvidia-persistenced main process (1549) terminated with status 1
- [ 16.936476] init: nvidia-prime main process (969) terminated with status 1
- [ 46.477815] usb 4-2: USB disconnect, device number 2
- [ 49.103216] usb 4-1: new SuperSpeed USB device number 4 using xhci_hcd
- [ 49.114759] usb 4-1: New USB device found, idVendor=8564, idProduct=1000
- [ 49.114762] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 49.114763] usb 4-1: Product: Mass Storage Device
- [ 49.114764] usb 4-1: Manufacturer: JetFlash
- [ 49.114765] usb 4-1: SerialNumber: 1215485291
- [ 49.115465] usb-storage 4-1:1.0: USB Mass Storage device detected
- [ 49.115490] scsi9 : usb-storage 4-1:1.0
- [ 50.118900] scsi 9:0:0:0: Direct-Access JetFlash Transcend 8GB 1.00 PQ: 0 ANSI: 6
- [ 50.126138] sd 9:0:0:0: Attached scsi generic sg2 type 0
- [ 50.126323] sd 9:0:0:0: [sdc] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB)
- [ 50.126474] sd 9:0:0:0: [sdc] Write Protect is off
- [ 50.126476] sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
- [ 50.126599] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
- [ 50.127855] sdc: sdc1
- [ 50.128573] sd 9:0:0:0: [sdc] Attached SCSI removable disk
- [ 58.008994] usb 3-2: new full-speed USB device number 10 using xhci_hcd
- [ 58.022297] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
- [ 58.022309] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 58.022310] usb 3-2: Product: USB Receiver
- [ 58.022311] usb 3-2: Manufacturer: Logitech
- [ 58.027404] hidraw: raw HID events driver (C) Jiri Kosina
- [ 58.031588] usbcore: registered new interface driver usbhid
- [ 58.031589] usbhid: USB HID core driver
- [ 58.033528] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
- [ 60.184897] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input10
- [ 60.184960] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:1
- [ 60.186948] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input11
- [ 60.187001] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:14.0-2:2
- [ 164.958509] usb 3-2: USB disconnect, device number 10
- [ 223.549355] usb 3-2: new full-speed USB device number 11 using xhci_hcd
- [ 223.563205] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
- [ 223.563215] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 223.563220] usb 3-2: Product: USB Receiver
- [ 223.563224] usb 3-2: Manufacturer: Logitech
- [ 223.568793] logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
- [ 226.978784] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0008/input/input12
- [ 226.979061] logitech-djdevice 0003:046D:C52B.0009: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:1
- [ 226.981208] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0008/input/input13
- [ 226.981735] logitech-djdevice 0003:046D:C52B.000A: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:14.0-2:2
- [ 326.368566] usb 3-3.1: USB disconnect, device number 5
- [ 329.451049] usb 3-3.1: new high-speed USB device number 12 using xhci_hcd
- [ 329.462147] usb 3-3.1: New USB device found, idVendor=0424, idProduct=2504
- [ 329.462151] usb 3-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 329.462560] hub 3-3.1:1.0: USB hub found
- [ 329.462600] hub 3-3.1:1.0: 4 ports detected
- [ 329.736190] usb 3-3.1.2: new full-speed USB device number 13 using xhci_hcd
- [ 329.753027] usb 3-3.1.2: New USB device found, idVendor=046d, idProduct=0a13
- [ 329.753037] usb 3-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 329.753042] usb 3-3.1.2: Product: Logitech Z-5 Speakers
- [ 329.753047] usb 3-3.1.2: Manufacturer: Logitech
- [ 329.776091] usbcore: registered new interface driver snd-usb-audio
- [ 329.816844] input: Logitech Logitech Z-5 Speakers as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.2/input/input14
- [ 329.816939] hid-generic 0003:046D:0A13.000B: input,hidraw3: USB HID v1.00 Device [Logitech Logitech Z-5 Speakers] on usb-0000:00:14.0-3.1.2/input2
- [ 337.320951] usb 3-2: USB disconnect, device number 11
- [ 342.581647] usb 3-3.1.4: new full-speed USB device number 14 using xhci_hcd
- [ 342.596093] usb 3-3.1.4: New USB device found, idVendor=046d, idProduct=c52b
- [ 342.596102] usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 342.596107] usb 3-3.1.4: Product: USB Receiver
- [ 342.596111] usb 3-3.1.4: Manufacturer: Logitech
- [ 342.603220] logitech-djreceiver 0003:046D:C52B.000E: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.1.4/input2
- [ 342.605051] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4:1.2/0003:046D:C52B.000E/input/input15
- [ 342.605206] logitech-djdevice 0003:046D:C52B.000F: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-3.1.4:1
- [ 342.607262] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4:1.2/0003:046D:C52B.000E/input/input16
- [ 342.607375] logitech-djdevice 0003:046D:C52B.0010: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:14.0-3.1.4:2
- sergey@sergey-pc:~/ >
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement