Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ::: HDD Guardian Toolbox | Administrator :::
- ╔═════════════════════════════════╗
- ║ Scan for internal ATA devices ║
- ╚═════════════════════════════════╝
- smartctl --scan -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl --scan -d ata
- /dev/sda -d ata # /dev/sda, ATA device
- /dev/sdb -d ata # /dev/sdb, ATA device
- /dev/sdc -d ata # /dev/sdc, ATA device
- /dev/sdd -d ata # /dev/sdd, ATA device
- /dev/sde -d ata # /dev/sde, ATA device
- /dev/sdf -d ata # /dev/sdf, ATA device
- /dev/sdg -d ata # /dev/sdg, ATA device
- /dev/sdh -d ata # /dev/sdh, ATA device
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: 8 internal devices detected :::
- ::: Scan device /dev/sda :::
- smartctl -x -g wcreorder /dev/sda -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sda -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red (AF)
- Device Model: WDC WD20EFRX-68EUZN0
- Serial Number: WD-WCC4M3031684
- LU WWN Device Id: 5 0014ee 2b4dc21ab
- Firmware Version: 80.00A80
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:54 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (26580) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 268) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 177 170 021 - 4133
- 4 Start_Stop_Count -O--CK 100 100 000 - 222
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 094 094 000 - 4625
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 50
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 26
- 193 Load_Cycle_Count -O--CK 200 200 000 - 232
- 194 Temperature_Celsius -O---K 118 105 000 - 29
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Conveyance offline Completed without error 00% 2 -
- # 2 Conveyance offline Completed without error 00% 2 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 29 Celsius
- Power Cycle Min/Max Temperature: 24/39 Celsius
- Lifetime Min/Max Temperature: 14/42 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (304)
- Index Estimated Time Temperature Celsius
- 305 2015-05-16 01:24 34 ***************
- 306 2015-05-16 01:25 34 ***************
- 307 2015-05-16 01:26 34 ***************
- 308 2015-05-16 01:27 35 ****************
- ... ..( 3 skipped). .. ****************
- 312 2015-05-16 01:31 35 ****************
- 313 2015-05-16 01:32 36 *****************
- ... ..( 23 skipped). .. *****************
- 337 2015-05-16 01:56 36 *****************
- 338 2015-05-16 01:57 ? -
- 339 2015-05-16 01:58 29 **********
- ... ..( 2 skipped). .. **********
- 342 2015-05-16 02:01 29 **********
- 343 2015-05-16 02:02 30 ***********
- 344 2015-05-16 02:03 30 ***********
- 345 2015-05-16 02:04 31 ************
- ... ..( 3 skipped). .. ************
- 349 2015-05-16 02:08 31 ************
- 350 2015-05-16 02:09 ? -
- 351 2015-05-16 02:10 31 ************
- ... ..( 4 skipped). .. ************
- 356 2015-05-16 02:15 31 ************
- 357 2015-05-16 02:16 32 *************
- ... ..( 2 skipped). .. *************
- 360 2015-05-16 02:19 32 *************
- 361 2015-05-16 02:20 33 **************
- 362 2015-05-16 02:21 33 **************
- 363 2015-05-16 02:22 33 **************
- 364 2015-05-16 02:23 ? -
- 365 2015-05-16 02:24 33 **************
- ... ..( 4 skipped). .. **************
- 370 2015-05-16 02:29 33 **************
- 371 2015-05-16 02:30 34 ***************
- ... ..( 6 skipped). .. ***************
- 378 2015-05-16 02:37 34 ***************
- 379 2015-05-16 02:38 ? -
- 380 2015-05-16 02:39 32 *************
- ... ..( 2 skipped). .. *************
- 383 2015-05-16 02:42 32 *************
- 384 2015-05-16 02:43 33 **************
- 385 2015-05-16 02:44 33 **************
- 386 2015-05-16 02:45 33 **************
- 387 2015-05-16 02:46 34 ***************
- ... ..( 2 skipped). .. ***************
- 390 2015-05-16 02:49 34 ***************
- 391 2015-05-16 02:50 ? -
- 392 2015-05-16 02:51 32 *************
- ... ..( 3 skipped). .. *************
- 396 2015-05-16 02:55 32 *************
- 397 2015-05-16 02:56 33 **************
- ... ..( 4 skipped). .. **************
- 402 2015-05-16 03:01 33 **************
- 403 2015-05-16 03:02 ? -
- 404 2015-05-16 03:03 30 ***********
- ... ..( 2 skipped). .. ***********
- 407 2015-05-16 03:06 30 ***********
- 408 2015-05-16 03:07 31 ************
- ... ..( 3 skipped). .. ************
- 412 2015-05-16 03:11 31 ************
- 413 2015-05-16 03:12 32 *************
- 414 2015-05-16 03:13 32 *************
- 415 2015-05-16 03:14 ? -
- 416 2015-05-16 03:15 31 ************
- ... ..( 4 skipped). .. ************
- 421 2015-05-16 03:20 31 ************
- 422 2015-05-16 03:21 32 *************
- ... ..( 6 skipped). .. *************
- 429 2015-05-16 03:28 32 *************
- 430 2015-05-16 03:29 33 **************
- 431 2015-05-16 03:30 33 **************
- 432 2015-05-16 03:31 ? -
- 433 2015-05-16 03:32 29 **********
- ... ..( 3 skipped). .. **********
- 437 2015-05-16 03:36 29 **********
- 438 2015-05-16 03:37 30 ***********
- 439 2015-05-16 03:38 30 ***********
- 440 2015-05-16 03:39 30 ***********
- 441 2015-05-16 03:40 31 ************
- 442 2015-05-16 03:41 31 ************
- 443 2015-05-16 03:42 31 ************
- 444 2015-05-16 03:43 ? -
- 445 2015-05-16 03:44 30 ***********
- 446 2015-05-16 03:45 30 ***********
- 447 2015-05-16 03:46 31 ************
- ... ..( 3 skipped). .. ************
- 451 2015-05-16 03:50 31 ************
- 452 2015-05-16 03:51 32 *************
- ... ..( 2 skipped). .. *************
- 455 2015-05-16 03:54 32 *************
- 456 2015-05-16 03:55 ? -
- 457 2015-05-16 03:56 25 ******
- ... ..( 2 skipped). .. ******
- 460 2015-05-16 03:59 25 ******
- 461 2015-05-16 04:00 26 *******
- 462 2015-05-16 04:01 26 *******
- 463 2015-05-16 04:02 27 ********
- ... ..( 3 skipped). .. ********
- 467 2015-05-16 04:06 27 ********
- 468 2015-05-16 04:07 ? -
- 469 2015-05-16 04:08 27 ********
- 470 2015-05-16 04:09 28 *********
- ... ..( 4 skipped). .. *********
- 475 2015-05-16 04:14 28 *********
- 476 2015-05-16 04:15 29 **********
- 477 2015-05-16 04:16 29 **********
- 0 2015-05-16 04:17 29 **********
- 1 2015-05-16 04:18 30 ***********
- 2 2015-05-16 04:19 ? -
- 3 2015-05-16 04:20 28 *********
- ... ..( 6 skipped). .. *********
- 10 2015-05-16 04:27 28 *********
- 11 2015-05-16 04:28 29 **********
- 12 2015-05-16 04:29 29 **********
- 13 2015-05-16 04:30 29 **********
- 14 2015-05-16 04:31 30 ***********
- 15 2015-05-16 04:32 30 ***********
- 16 2015-05-16 04:33 30 ***********
- 17 2015-05-16 04:34 31 ************
- ... ..( 5 skipped). .. ************
- 23 2015-05-16 04:40 31 ************
- 24 2015-05-16 04:41 ? -
- 25 2015-05-16 04:42 29 **********
- 26 2015-05-16 04:43 29 **********
- 27 2015-05-16 04:44 31 ************
- 28 2015-05-16 04:45 31 ************
- 29 2015-05-16 04:46 31 ************
- 30 2015-05-16 04:47 32 *************
- ... ..( 2 skipped). .. *************
- 33 2015-05-16 04:50 32 *************
- 34 2015-05-16 04:51 33 **************
- ... ..( 3 skipped). .. **************
- 38 2015-05-16 04:55 33 **************
- 39 2015-05-16 04:56 ? -
- 40 2015-05-16 04:57 32 *************
- ... ..( 3 skipped). .. *************
- 44 2015-05-16 05:01 32 *************
- 45 2015-05-16 05:02 33 **************
- 46 2015-05-16 05:03 33 **************
- 47 2015-05-16 05:04 33 **************
- 48 2015-05-16 05:05 34 ***************
- 49 2015-05-16 05:06 34 ***************
- 50 2015-05-16 05:07 34 ***************
- 51 2015-05-16 05:08 35 ****************
- 52 2015-05-16 05:09 35 ****************
- 53 2015-05-16 05:10 ? -
- 54 2015-05-16 05:11 35 ****************
- 55 2015-05-16 05:12 35 ****************
- 56 2015-05-16 05:13 35 ****************
- 57 2015-05-16 05:14 36 *****************
- ... ..( 11 skipped). .. *****************
- 69 2015-05-16 05:26 36 *****************
- 70 2015-05-16 05:27 37 ******************
- ... ..( 11 skipped). .. ******************
- 82 2015-05-16 05:39 37 ******************
- 83 2015-05-16 05:40 38 *******************
- ... ..( 21 skipped). .. *******************
- 105 2015-05-16 06:02 38 *******************
- 106 2015-05-16 06:03 39 ********************
- ... ..( 27 skipped). .. ********************
- 134 2015-05-16 06:31 39 ********************
- 135 2015-05-16 06:32 ? -
- 136 2015-05-16 06:33 38 *******************
- ... ..( 12 skipped). .. *******************
- 149 2015-05-16 06:46 38 *******************
- 150 2015-05-16 06:47 ? -
- 151 2015-05-16 06:48 35 ****************
- ... ..( 2 skipped). .. ****************
- 154 2015-05-16 06:51 35 ****************
- 155 2015-05-16 06:52 36 *****************
- ... ..( 5 skipped). .. *****************
- 161 2015-05-16 06:58 36 *****************
- 162 2015-05-16 06:59 ? -
- 163 2015-05-16 07:00 32 *************
- ... ..( 2 skipped). .. *************
- 166 2015-05-16 07:03 32 *************
- 167 2015-05-16 07:04 33 **************
- 168 2015-05-16 07:05 33 **************
- 169 2015-05-16 07:06 33 **************
- 170 2015-05-16 07:07 34 ***************
- ... ..( 2 skipped). .. ***************
- 173 2015-05-16 07:10 34 ***************
- 174 2015-05-16 07:11 ? -
- 175 2015-05-16 07:12 32 *************
- ... ..( 5 skipped). .. *************
- 181 2015-05-16 07:18 32 *************
- 182 2015-05-16 07:19 33 **************
- 183 2015-05-16 07:20 33 **************
- 184 2015-05-16 07:21 33 **************
- 185 2015-05-16 07:22 34 ***************
- ... ..( 2 skipped). .. ***************
- 188 2015-05-16 07:25 34 ***************
- 189 2015-05-16 07:26 35 ****************
- 190 2015-05-16 07:27 35 ****************
- 191 2015-05-16 07:28 35 ****************
- 192 2015-05-16 07:29 ? -
- 193 2015-05-16 07:30 35 ****************
- 194 2015-05-16 07:31 36 *****************
- ... ..( 8 skipped). .. *****************
- 203 2015-05-16 07:40 36 *****************
- 204 2015-05-16 07:41 ? -
- 205 2015-05-16 07:42 31 ************
- ... ..( 3 skipped). .. ************
- 209 2015-05-16 07:46 31 ************
- 210 2015-05-16 07:47 32 *************
- 211 2015-05-16 07:48 32 *************
- 212 2015-05-16 07:49 32 *************
- 213 2015-05-16 07:50 33 **************
- ... ..( 2 skipped). .. **************
- 216 2015-05-16 07:53 33 **************
- 217 2015-05-16 07:54 34 ***************
- 218 2015-05-16 07:55 ? -
- 219 2015-05-16 07:56 34 ***************
- ... ..( 4 skipped). .. ***************
- 224 2015-05-16 08:01 34 ***************
- 225 2015-05-16 08:02 35 ****************
- ... ..( 3 skipped). .. ****************
- 229 2015-05-16 08:06 35 ****************
- 230 2015-05-16 08:07 ? -
- 231 2015-05-16 08:08 32 *************
- 232 2015-05-16 08:09 32 *************
- 233 2015-05-16 08:10 32 *************
- 234 2015-05-16 08:11 33 **************
- 235 2015-05-16 08:12 33 **************
- 236 2015-05-16 08:13 34 ***************
- 237 2015-05-16 08:14 34 ***************
- 238 2015-05-16 08:15 34 ***************
- 239 2015-05-16 08:16 35 ****************
- ... ..( 2 skipped). .. ****************
- 242 2015-05-16 08:19 35 ****************
- 243 2015-05-16 08:20 36 *****************
- ... ..( 4 skipped). .. *****************
- 248 2015-05-16 08:25 36 *****************
- 249 2015-05-16 08:26 ? -
- 250 2015-05-16 08:27 31 ************
- ... ..( 3 skipped). .. ************
- 254 2015-05-16 08:31 31 ************
- 255 2015-05-16 08:32 32 *************
- 256 2015-05-16 08:33 32 *************
- 257 2015-05-16 08:34 32 *************
- 258 2015-05-16 08:35 33 **************
- 259 2015-05-16 08:36 33 **************
- 260 2015-05-16 08:37 33 **************
- 261 2015-05-16 08:38 34 ***************
- 262 2015-05-16 08:39 ? -
- 263 2015-05-16 08:40 32 *************
- 264 2015-05-16 08:41 32 *************
- 265 2015-05-16 08:42 32 *************
- 266 2015-05-16 08:43 33 **************
- 267 2015-05-16 08:44 33 **************
- 268 2015-05-16 08:45 33 **************
- 269 2015-05-16 08:46 34 ***************
- ... ..( 2 skipped). .. ***************
- 272 2015-05-16 08:49 34 ***************
- 273 2015-05-16 08:50 35 ****************
- 274 2015-05-16 08:51 ? -
- 275 2015-05-16 08:52 31 ************
- ... ..( 4 skipped). .. ************
- 280 2015-05-16 08:57 31 ************
- 281 2015-05-16 08:58 32 *************
- 282 2015-05-16 08:59 32 *************
- 283 2015-05-16 09:00 32 *************
- 284 2015-05-16 09:01 33 **************
- ... ..( 2 skipped). .. **************
- 287 2015-05-16 09:04 33 **************
- 288 2015-05-16 09:05 ? -
- 289 2015-05-16 09:06 29 **********
- 290 2015-05-16 09:07 29 **********
- 291 2015-05-16 09:08 29 **********
- 292 2015-05-16 09:09 30 ***********
- 293 2015-05-16 09:10 30 ***********
- 294 2015-05-16 09:11 31 ************
- ... ..( 2 skipped). .. ************
- 297 2015-05-16 09:14 31 ************
- 298 2015-05-16 09:15 32 *************
- 299 2015-05-16 09:16 32 *************
- 300 2015-05-16 09:17 32 *************
- 301 2015-05-16 09:18 33 **************
- 302 2015-05-16 09:19 33 **************
- 303 2015-05-16 09:20 33 **************
- 304 2015-05-16 09:21 34 ***************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 50489 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 158453 Vendor specific
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdb :::
- smartctl -x -g wcreorder /dev/sdb -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdb -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda SpinPoint F3
- Device Model: ST1000DM005 HD103SJ
- Serial Number: S246JX0D101865
- LU WWN Device Id: 5 0000f0 0100b6518
- Firmware Version: 1AJ10001
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Sat May 16 09:21:55 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM level is: 254 (maximum performance), recommended: 254
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 9960) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 166) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 410
- 2 Throughput_Performance -OS--K 252 252 000 - 0
- 3 Spin_Up_Time PO---K 071 069 025 - 8949
- 4 Start_Stop_Count -O--CK 100 100 000 - 502
- 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
- 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
- 8 Seek_Time_Performance --S--K 252 252 015 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 16932
- 10 Spin_Retry_Count -O--CK 252 252 051 - 0
- 11 Calibration_Retry_Count -O--CK 252 252 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 91
- 191 G-Sense_Error_Rate -O---K 100 100 000 - 393
- 192 Power-Off_Retract_Count -O---K 252 252 000 - 0
- 194 Temperature_Celsius -O---- 064 056 000 - 28 (Min/Max 13/44)
- 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
- 196 Reallocated_Event_Count -O--CK 252 252 000 - 0
- 197 Current_Pending_Sector -O--CK 252 100 000 - 0
- 198 Offline_Uncorrectable ----CK 252 252 000 - 0
- 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 81
- 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 9881
- 223 Load_Retry_Count -O--CK 252 252 000 - 0
- 225 Load_Cycle_Count -O--CK 100 100 000 - 516
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 2 Comprehensive SMART error log
- 0x03 GPL R/O 2 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 2 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
- Device Error Count: 92 (device log contains only the most recent 8 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 92 [3] occurred at disk power-on lifetime: 12560 hours (523 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 4c c0 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 d0 00 40 00 00 38 fd 4c c0 40 00 00:00:08.574 WRITE FPDMA QUEUED
- 61 00 d0 00 80 00 00 38 fd 4c 80 40 00 00:00:08.574 WRITE FPDMA QUEUED
- 61 00 d0 00 80 00 00 38 fd 4c 00 40 00 00:00:08.574 WRITE FPDMA QUEUED
- 61 00 d0 00 80 00 00 38 fd 4b 80 40 00 00:00:08.574 WRITE FPDMA QUEUED
- 61 00 d0 00 80 00 00 38 fd 4b 00 40 00 00:00:08.574 WRITE FPDMA QUEUED
- Error 91 [2] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.981 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.994 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.994 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.994 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.994 SET FEATURES [Enable write cache]
- Error 90 [1] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.981 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.992 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.992 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.992 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.992 SET FEATURES [Enable write cache]
- Error 89 [0] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.980 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.991 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.991 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.991 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.991 SET FEATURES [Enable write cache]
- Error 88 [7] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.980 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.990 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.990 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.990 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.990 SET FEATURES [Enable write cache]
- Error 87 [6] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.980 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.989 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.989 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.989 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.989 SET FEATURES [Enable write cache]
- Error 86 [5] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.980 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.988 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.988 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.988 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.988 SET FEATURES [Enable write cache]
- Error 85 [4] occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 2c 00 00 60 ce e6 44 40 00 Error: UNC at LBA = 0x60cee644 = 1624172100
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d0 00 38 00 00 60 ce e6 38 40 00 01:00:51.980 READ FPDMA QUEUED
- 61 00 d0 00 08 00 00 61 76 d9 60 40 00 01:00:51.986 WRITE FPDMA QUEUED
- 60 00 90 00 38 00 00 60 ce e6 38 40 00 01:00:51.986 READ FPDMA QUEUED
- ef 00 90 00 03 00 00 00 00 00 00 00 00 01:00:51.986 SET FEATURES [Disable SATA feature]
- ef 00 02 00 00 00 00 00 00 00 00 00 00 01:00:51.986 SET FEATURES [Enable write cache]
- SMART Extended Self-test Log Version: 1 (2 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed [00% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 256 (0x0100)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 28 Celsius
- Power Cycle Min/Max Temperature: 22/41 Celsius
- Lifetime Min/Max Temperature: 16/45 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 5 minutes
- Temperature Logging Interval: 5 minutes
- Min/Max recommended Temperature: -5/80 Celsius
- Min/Max Temperature Limit: -10/85 Celsius
- Temperature History Size (Index): 128 (61)
- Index Estimated Time Temperature Celsius
- 62 2015-05-15 22:45 35 ****************
- 63 2015-05-15 22:50 26 *******
- 64 2015-05-15 22:55 28 *********
- 65 2015-05-15 23:00 30 ***********
- 66 2015-05-15 23:05 32 *************
- 67 2015-05-15 23:10 33 **************
- 68 2015-05-15 23:15 31 ************
- 69 2015-05-15 23:20 32 *************
- 70 2015-05-15 23:25 33 **************
- 71 2015-05-15 23:30 23 ****
- 72 2015-05-15 23:35 25 ******
- 73 2015-05-15 23:40 27 ********
- 74 2015-05-15 23:45 29 **********
- 75 2015-05-15 23:50 30 ***********
- 76 2015-05-15 23:55 30 ***********
- 77 2015-05-16 00:00 31 ************
- 78 2015-05-16 00:05 31 ************
- 79 2015-05-16 00:10 32 *************
- 80 2015-05-16 00:15 32 *************
- 81 2015-05-16 00:20 25 ******
- 82 2015-05-16 00:25 27 ********
- 83 2015-05-16 00:30 29 **********
- 84 2015-05-16 00:35 25 ******
- 85 2015-05-16 00:40 27 ********
- 86 2015-05-16 00:45 29 **********
- 87 2015-05-16 00:50 31 ************
- 88 2015-05-16 00:55 32 *************
- 89 2015-05-16 01:00 33 **************
- 90 2015-05-16 01:05 34 ***************
- 91 2015-05-16 01:10 27 ********
- 92 2015-05-16 01:15 28 *********
- 93 2015-05-16 01:20 30 ***********
- 94 2015-05-16 01:25 32 *************
- 95 2015-05-16 01:30 26 *******
- 96 2015-05-16 01:35 27 ********
- 97 2015-05-16 01:40 29 **********
- 98 2015-05-16 01:45 31 ************
- 99 2015-05-16 01:50 32 *************
- 100 2015-05-16 01:55 31 ************
- 101 2015-05-16 02:00 32 *************
- 102 2015-05-16 02:05 33 **************
- 103 2015-05-16 02:10 34 ***************
- 104 2015-05-16 02:15 25 ******
- 105 2015-05-16 02:20 26 *******
- 106 2015-05-16 02:25 29 **********
- 107 2015-05-16 02:30 30 ***********
- 108 2015-05-16 02:35 30 ***********
- 109 2015-05-16 02:40 31 ************
- 110 2015-05-16 02:45 32 *************
- 111 2015-05-16 02:50 26 *******
- 112 2015-05-16 02:55 27 ********
- 113 2015-05-16 03:00 29 **********
- 114 2015-05-16 03:05 31 ************
- 115 2015-05-16 03:10 32 *************
- 116 2015-05-16 03:15 32 *************
- 117 2015-05-16 03:20 31 ************
- 118 2015-05-16 03:25 32 *************
- 119 2015-05-16 03:30 24 *****
- 120 2015-05-16 03:35 26 *******
- 121 2015-05-16 03:40 28 *********
- 122 2015-05-16 03:45 24 *****
- 123 2015-05-16 03:50 26 *******
- 124 2015-05-16 03:55 28 *********
- 125 2015-05-16 04:00 30 ***********
- 126 2015-05-16 04:05 31 ************
- 127 2015-05-16 04:10 31 ************
- 0 2015-05-16 04:15 32 *************
- 1 2015-05-16 04:20 33 **************
- 2 2015-05-16 04:25 33 **************
- 3 2015-05-16 04:30 26 *******
- 4 2015-05-16 04:35 28 *********
- 5 2015-05-16 04:40 30 ***********
- 6 2015-05-16 04:45 31 ************
- 7 2015-05-16 04:50 32 *************
- 8 2015-05-16 04:55 33 **************
- 9 2015-05-16 05:00 34 ***************
- 10 2015-05-16 05:05 34 ***************
- 11 2015-05-16 05:10 35 ****************
- ... ..( 4 skipped). .. ****************
- 16 2015-05-16 05:35 35 ****************
- 17 2015-05-16 05:40 36 *****************
- 18 2015-05-16 05:45 28 *********
- 19 2015-05-16 05:50 30 ***********
- 20 2015-05-16 05:55 32 *************
- 21 2015-05-16 06:00 33 **************
- 22 2015-05-16 06:05 35 ****************
- 23 2015-05-16 06:10 36 *****************
- 24 2015-05-16 06:15 36 *****************
- 25 2015-05-16 06:20 37 ******************
- 26 2015-05-16 06:25 37 ******************
- 27 2015-05-16 06:30 38 *******************
- 28 2015-05-16 06:35 38 *******************
- 29 2015-05-16 06:40 33 **************
- 30 2015-05-16 06:45 34 ***************
- 31 2015-05-16 06:50 35 ****************
- 32 2015-05-16 06:55 36 *****************
- 33 2015-05-16 07:00 37 ******************
- 34 2015-05-16 07:05 38 *******************
- 35 2015-05-16 07:10 38 *******************
- 36 2015-05-16 07:15 38 *******************
- 37 2015-05-16 07:20 39 ********************
- ... ..( 18 skipped). .. ********************
- 56 2015-05-16 08:55 39 ********************
- 57 2015-05-16 09:00 30 ***********
- 58 2015-05-16 09:05 32 *************
- 59 2015-05-16 09:10 34 ***************
- 60 2015-05-16 09:15 35 ****************
- 61 2015-05-16 09:20 28 *********
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 4 0 Command failed due to ICRC error
- 0x0002 4 0 R_ERR response for data FIS
- 0x0003 4 0 R_ERR response for device-to-host data FIS
- 0x0004 4 0 R_ERR response for host-to-device data FIS
- 0x0005 4 0 R_ERR response for non-data FIS
- 0x0006 4 0 R_ERR response for device-to-host non-data FIS
- 0x0007 4 0 R_ERR response for host-to-device non-data FIS
- 0x0008 4 0 Device-to-host non-data FIS retries
- 0x0009 4 386646 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 16 Device-to-host register FISes sent due to a COMRESET
- 0x000b 4 0 CRC errors within host-to-device FIS
- 0x000d 4 0 Non-CRC errors within host-to-device FIS
- 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
- 0x8e00 4 0 Vendor specific
- 0x8e01 4 0 Vendor specific
- 0x8e02 4 0 Vendor specific
- 0x8e03 4 0 Vendor specific
- 0x8e04 4 0 Vendor specific
- 0x8e05 4 0 Vendor specific
- 0x8e06 4 0 Vendor specific
- 0x8e07 4 0 Vendor specific
- 0x8e08 4 0 Vendor specific
- 0x8e09 4 0 Vendor specific
- 0x8e0a 4 0 Vendor specific
- 0x8e0b 4 0 Vendor specific
- 0x8e0c 4 0 Vendor specific
- 0x8e0d 4 0 Vendor specific
- 0x8e0e 4 0 Vendor specific
- 0x8e0f 4 0 Vendor specific
- 0x8e10 4 0 Vendor specific
- 0x8e11 4 0 Vendor specific
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdc :::
- smartctl -x -g wcreorder /dev/sdc -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdc -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Black
- Device Model: WDC WD1002FAEX-00Y9A0
- Serial Number: WD-WCAW34041716
- LU WWN Device Id: 5 0014ee 20734c094
- Firmware Version: 05.01D05
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:56 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (16500) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 170) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 12
- 3 Spin_Up_Time POS--K 175 173 021 - 4225
- 4 Start_Stop_Count -O--CK 100 100 000 - 638
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 071 071 000 - 21870
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 156
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 83
- 193 Load_Cycle_Count -O--CK 200 200 000 - 554
- 194 Temperature_Celsius -O---K 117 100 000 - 30
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 69
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 4223 -
- # 2 Extended offline Completed without error 00% 84 -
- # 3 Extended offline Completed without error 00% 76 -
- # 4 Short offline Completed without error 00% 73 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 30 Celsius
- Power Cycle Min/Max Temperature: 24/44 Celsius
- Lifetime Min/Max Temperature: 24/47 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (194)
- Index Estimated Time Temperature Celsius
- 195 2015-05-16 01:24 30 ***********
- ... ..( 40 skipped). .. ***********
- 236 2015-05-16 02:05 30 ***********
- 237 2015-05-16 02:06 ? -
- 238 2015-05-16 02:07 30 ***********
- 239 2015-05-16 02:08 42 ***********************
- ... ..( 7 skipped). .. ***********************
- 247 2015-05-16 02:16 42 ***********************
- 248 2015-05-16 02:17 43 ************************
- ... ..( 2 skipped). .. ************************
- 251 2015-05-16 02:20 43 ************************
- 252 2015-05-16 02:21 42 ***********************
- 253 2015-05-16 02:22 42 ***********************
- 254 2015-05-16 02:23 41 **********************
- ... ..( 2 skipped). .. **********************
- 257 2015-05-16 02:26 41 **********************
- 258 2015-05-16 02:27 40 *********************
- 259 2015-05-16 02:28 40 *********************
- 260 2015-05-16 02:29 39 ********************
- 261 2015-05-16 02:30 39 ********************
- 262 2015-05-16 02:31 39 ********************
- 263 2015-05-16 02:32 38 *******************
- 264 2015-05-16 02:33 38 *******************
- 265 2015-05-16 02:34 38 *******************
- 266 2015-05-16 02:35 37 ******************
- 267 2015-05-16 02:36 37 ******************
- 268 2015-05-16 02:37 37 ******************
- 269 2015-05-16 02:38 36 *****************
- ... ..( 8 skipped). .. *****************
- 278 2015-05-16 02:47 36 *****************
- 279 2015-05-16 02:48 35 ****************
- ... ..( 3 skipped). .. ****************
- 283 2015-05-16 02:52 35 ****************
- 284 2015-05-16 02:53 34 ***************
- ... ..( 8 skipped). .. ***************
- 293 2015-05-16 03:02 34 ***************
- 294 2015-05-16 03:03 33 **************
- ... ..( 37 skipped). .. **************
- 332 2015-05-16 03:41 33 **************
- 333 2015-05-16 03:42 32 *************
- ... ..(245 skipped). .. *************
- 101 2015-05-16 07:48 32 *************
- 102 2015-05-16 07:49 31 ************
- ... ..( 53 skipped). .. ************
- 156 2015-05-16 08:43 31 ************
- 157 2015-05-16 08:44 30 ***********
- ... ..( 36 skipped). .. ***********
- 194 2015-05-16 09:21 30 ***********
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 1442015 Vendor specific
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdd :::
- smartctl -x -g wcreorder /dev/sdd -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdd -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Blue (SATA 6Gb/s)
- Device Model: WDC WD3200AAKX-001CA0
- Serial Number: WD-WMAYUV529827
- LU WWN Device Id: 5 0014ee 15a02b75e
- Firmware Version: 15.01H15
- User Capacity: 320,072,933,376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:56 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 5400) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 57) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 140 138 021 - 3991
- 4 Start_Stop_Count -O--CK 100 100 000 - 308
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 070 070 000 - 22597
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 284
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 176
- 193 Load_Cycle_Count -O--CK 200 200 000 - 131
- 194 Temperature_Celsius -O---K 105 099 000 - 38
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 4996 -
- # 2 Short offline Completed without error 00% 4995 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 38 Celsius
- Power Cycle Min/Max Temperature: 32/43 Celsius
- Lifetime Min/Max Temperature: 0/44 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (186)
- Index Estimated Time Temperature Celsius
- 187 2015-05-16 01:24 38 *******************
- ... ..( 16 skipped). .. *******************
- 204 2015-05-16 01:41 38 *******************
- 205 2015-05-16 01:42 37 ******************
- 206 2015-05-16 01:43 38 *******************
- ... ..( 17 skipped). .. *******************
- 224 2015-05-16 02:01 38 *******************
- 225 2015-05-16 02:02 37 ******************
- 226 2015-05-16 02:03 38 *******************
- 227 2015-05-16 02:04 38 *******************
- 228 2015-05-16 02:05 38 *******************
- 229 2015-05-16 02:06 37 ******************
- 230 2015-05-16 02:07 38 *******************
- 231 2015-05-16 02:08 41 **********************
- ... ..( 13 skipped). .. **********************
- 245 2015-05-16 02:22 41 **********************
- 246 2015-05-16 02:23 40 *********************
- ... ..(196 skipped). .. *********************
- 443 2015-05-16 05:40 40 *********************
- 444 2015-05-16 05:41 41 **********************
- ... ..( 21 skipped). .. **********************
- 466 2015-05-16 06:03 41 **********************
- 467 2015-05-16 06:04 40 *********************
- ... ..( 75 skipped). .. *********************
- 65 2015-05-16 07:20 40 *********************
- 66 2015-05-16 07:21 39 ********************
- 67 2015-05-16 07:22 40 *********************
- 68 2015-05-16 07:23 40 *********************
- 69 2015-05-16 07:24 40 *********************
- 70 2015-05-16 07:25 39 ********************
- 71 2015-05-16 07:26 40 *********************
- 72 2015-05-16 07:27 39 ********************
- 73 2015-05-16 07:28 39 ********************
- 74 2015-05-16 07:29 40 *********************
- 75 2015-05-16 07:30 39 ********************
- ... ..( 22 skipped). .. ********************
- 98 2015-05-16 07:53 39 ********************
- 99 2015-05-16 07:54 38 *******************
- 100 2015-05-16 07:55 39 ********************
- 101 2015-05-16 07:56 39 ********************
- 102 2015-05-16 07:57 39 ********************
- 103 2015-05-16 07:58 38 *******************
- 104 2015-05-16 07:59 38 *******************
- 105 2015-05-16 08:00 39 ********************
- 106 2015-05-16 08:01 39 ********************
- 107 2015-05-16 08:02 38 *******************
- 108 2015-05-16 08:03 39 ********************
- 109 2015-05-16 08:04 39 ********************
- 110 2015-05-16 08:05 38 *******************
- ... ..( 3 skipped). .. *******************
- 114 2015-05-16 08:09 38 *******************
- 115 2015-05-16 08:10 39 ********************
- 116 2015-05-16 08:11 38 *******************
- ... ..( 69 skipped). .. *******************
- 186 2015-05-16 09:21 38 *******************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 1442032 Vendor specific
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sde :::
- smartctl -x -g wcreorder /dev/sde -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sde -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red (AF)
- Device Model: WDC WD20EFRX-68EUZN0
- Serial Number: WD-WCC4MRCLNTJ1
- LU WWN Device Id: 5 0014ee 2b5bca170
- Firmware Version: 82.00A82
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:56 2015 EDT
- SMART support is: Available - device has SMART capability.
- Enabled status cached by OS, trying SMART RETURN STATUS cmd.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Function not implemented
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (27360) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 276) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 1
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 400
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 529
- 194 Temperature_Celsius -O---K 112 108 000 - 35
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not implemented
- Read GP Log Directory failed
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x80-0x9f SL R/W 16 Host vendor specific log
- 0xa0-0xa7 SL VS 16 Device vendor specific log
- 0xa8-0xb7 SL VS 1 Device vendor specific log
- 0xbd SL VS 1 Device vendor specific log
- 0xc0 SL VS 1 Device vendor specific log
- 0xe0 SL R/W 1 SCT Command/Status
- 0xe1 SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- SMART Error Log Version: 1
- No Errors Logged
- SMART Extended Self-test Log (GP Log 0x07) not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 35 Celsius
- Power Cycle Min/Max Temperature: 25/40 Celsius
- Lifetime Min/Max Temperature: 25/40 Celsius
- Under/Over Temperature Limit Count: 0/0
- Write SCT Data Table failed: Function not implemented
- Read SCT Temperature History failed
- Write SCT (Get) Error Recovery Control Command failed: Function not implemented
- SCT (Get) Error Recovery Control command failed
- Device Statistics (GP Log 0x04) not supported
- ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Function not implemented
- Read SATA Phy Event Counters failed
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdf :::
- smartctl -x -g wcreorder /dev/sdf -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdf -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red (AF)
- Device Model: WDC WD20EFRX-68EUZN0
- Serial Number: WD-WCC4MRCLNTJ1
- LU WWN Device Id: 5 0014ee 2b5bca170
- Firmware Version: 82.00A82
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:56 2015 EDT
- SMART support is: Available - device has SMART capability.
- Enabled status cached by OS, trying SMART RETURN STATUS cmd.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Function not implemented
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (27360) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 276) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 1
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 400
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 529
- 194 Temperature_Celsius -O---K 112 108 000 - 35
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not implemented
- Read GP Log Directory failed
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x80-0x9f SL R/W 16 Host vendor specific log
- 0xa0-0xa7 SL VS 16 Device vendor specific log
- 0xa8-0xb7 SL VS 1 Device vendor specific log
- 0xbd SL VS 1 Device vendor specific log
- 0xc0 SL VS 1 Device vendor specific log
- 0xe0 SL R/W 1 SCT Command/Status
- 0xe1 SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- SMART Error Log Version: 1
- No Errors Logged
- SMART Extended Self-test Log (GP Log 0x07) not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 35 Celsius
- Power Cycle Min/Max Temperature: 25/40 Celsius
- Lifetime Min/Max Temperature: 25/40 Celsius
- Under/Over Temperature Limit Count: 0/0
- Write SCT Data Table failed: Function not implemented
- Read SCT Temperature History failed
- Write SCT (Get) Error Recovery Control Command failed: Function not implemented
- SCT (Get) Error Recovery Control command failed
- Device Statistics (GP Log 0x04) not supported
- ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Function not implemented
- Read SATA Phy Event Counters failed
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdg :::
- smartctl -x -g wcreorder /dev/sdg -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdg -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red (AF)
- Device Model: WDC WD20EFRX-68EUZN0
- Serial Number: WD-WCC4MRCLNTJ1
- LU WWN Device Id: 5 0014ee 2b5bca170
- Firmware Version: 82.00A82
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:56 2015 EDT
- SMART support is: Available - device has SMART capability.
- Enabled status cached by OS, trying SMART RETURN STATUS cmd.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Function not implemented
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (27360) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 276) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 1
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 400
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 529
- 194 Temperature_Celsius -O---K 112 108 000 - 35
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not implemented
- Read GP Log Directory failed
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x80-0x9f SL R/W 16 Host vendor specific log
- 0xa0-0xa7 SL VS 16 Device vendor specific log
- 0xa8-0xb7 SL VS 1 Device vendor specific log
- 0xbd SL VS 1 Device vendor specific log
- 0xc0 SL VS 1 Device vendor specific log
- 0xe0 SL R/W 1 SCT Command/Status
- 0xe1 SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- SMART Error Log Version: 1
- No Errors Logged
- SMART Extended Self-test Log (GP Log 0x07) not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 35 Celsius
- Power Cycle Min/Max Temperature: 25/40 Celsius
- Lifetime Min/Max Temperature: 25/40 Celsius
- Under/Over Temperature Limit Count: 0/0
- Write SCT Data Table failed: Function not implemented
- Read SCT Temperature History failed
- Write SCT (Get) Error Recovery Control Command failed: Function not implemented
- SCT (Get) Error Recovery Control command failed
- Device Statistics (GP Log 0x04) not supported
- ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Function not implemented
- Read SATA Phy Event Counters failed
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: Scan device /dev/sdh :::
- smartctl -x -g wcreorder /dev/sdh -d ata
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl -x -g wcreorder /dev/sdh -d ata
- smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red (AF)
- Device Model: WDC WD20EFRX-68EUZN0
- Serial Number: WD-WCC4MRCLNTJ1
- LU WWN Device Id: 5 0014ee 2b5bca170
- Firmware Version: 82.00A82
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat May 16 09:21:57 2015 EDT
- SMART support is: Available - device has SMART capability.
- Enabled status cached by OS, trying SMART RETURN STATUS cmd.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Function not implemented
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (27360) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 276) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 1
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 400
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 529
- 194 Temperature_Celsius -O---K 112 108 000 - 35
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not implemented
- Read GP Log Directory failed
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x80-0x9f SL R/W 16 Host vendor specific log
- 0xa0-0xa7 SL VS 16 Device vendor specific log
- 0xa8-0xb7 SL VS 1 Device vendor specific log
- 0xbd SL VS 1 Device vendor specific log
- 0xc0 SL VS 1 Device vendor specific log
- 0xe0 SL R/W 1 SCT Command/Status
- 0xe1 SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- SMART Error Log Version: 1
- No Errors Logged
- SMART Extended Self-test Log (GP Log 0x07) not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 35 Celsius
- Power Cycle Min/Max Temperature: 25/40 Celsius
- Lifetime Min/Max Temperature: 25/40 Celsius
- Under/Over Temperature Limit Count: 0/0
- Write SCT Data Table failed: Function not implemented
- Read SCT Temperature History failed
- Write SCT (Get) Error Recovery Control Command failed: Function not implemented
- SCT (Get) Error Recovery Control command failed
- Device Statistics (GP Log 0x04) not supported
- ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Function not implemented
- Read SATA Phy Event Counters failed
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ╔═════════════════════════════════╗
- ║ Scan for external USB devices ║
- ╚═════════════════════════════════╝
- smartctl --scan -d usb
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl --scan -d usb
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: no external devices detected :::
- ╔═════════════════════════════════╗
- ║ Scan for SCSI devices ║
- ╚═════════════════════════════════╝
- smartctl --scan -d scsi
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl --scan -d scsi
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: no SCSI devices detected :::
- ╔═════════════════════════════════╗
- ║ Scan for Intel Matrix devices ║
- ╚═════════════════════════════════╝
- smartctl --scan -d csmi
- Microsoft Windows [Version 6.1.7601]
- Copyright (c) 2009 Microsoft Corporation. All rights reserved.
- C:\Program Files (x86)\HDD Guardian\smartctl>smartctl --scan -d csmi
- C:\Program Files (x86)\HDD Guardian\smartctl>exit
- ::: no Intel Matrix connected devices detected :::
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement