Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HCI sniffer - Bluetooth packet analyzer ver 2.4
- device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
- > HCI Event: Connect Complete (0x03) plen 11
- status 0x08 handle 12 bdaddr XX:XX:XX:XX:XX:XX type ACL encrypt 0x00
- Error: Connection Timeout
- < HCI Command: Create Connection (0x01|0x0005) plen 13
- bdaddr XX:XX:XX:XX:XX:XX ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
- Packet type: DM1 DM3 DM5 DH1 DH3 DH5
- > HCI Event: Command Status (0x0f) plen 4
- Create Connection (0x01|0x0005) status 0x00 ncmd 1
- > HCI Event: Connect Complete (0x03) plen 11
- status 0x00 handle 12 bdaddr XX:XX:XX:XX:XX:XX type ACL encrypt 0x00
- < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
- > HCI Event: Read Remote Supported Features (0x0b) plen 11
- status 0x00 handle 12
- Features: 0xbc 0x04 0x82 0x78 0x00 0x06 0x59 0x83
- < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
- handle 12 page 1
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
- > HCI Event: Read Remote Extended Features (0x23) plen 13
- status 0x00 handle 12 page 1 max 1
- Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
- < HCI Command: Remote Name Request (0x01|0x0019) plen 10
- bdaddr XX:XX:XX:XX:XX:XX mode 2 clkoffset 0x0000
- > HCI Event: Command Status (0x0f) plen 4
- Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
- > HCI Event: Remote Name Req Complete (0x07) plen 255
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX name 'Logitech K810'
- < HCI Command: Authentication Requested (0x01|0x0011) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
- > HCI Event: Link Key Request (0x17) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: Command Complete (0x0e) plen 10
- Link Key Request Negative Reply (0x01|0x000c) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: IO Capability Request (0x31) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
- bdaddr XX:XX:XX:XX:XX:XX capability 0x01 oob 0x00 auth 0x03
- Capability: DisplayYesNo (OOB data not present)
- Authentication: Dedicated Bonding (MITM Protection)
- > HCI Event: Command Complete (0x0e) plen 10
- IO Capability Request Reply (0x01|0x002b) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: Simple Pairing Complete (0x36) plen 7
- status 0x05 bdaddr XX:XX:XX:XX:XX:XX
- Error: Authentication Failure
- > HCI Event: Auth Complete (0x06) plen 3
- status 0x05 handle 12
- Error: Authentication Failure
- > HCI Event: Disconn Complete (0x05) plen 4
- status 0x00 handle 12 reason 0x13
- Reason: Remote User Terminated Connection
- < HCI Command: Create Connection (0x01|0x0005) plen 13
- bdaddr XX:XX:XX:XX:XX:XX ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
- Packet type: DM1 DM3 DM5 DH1 DH3 DH5
- > HCI Event: Command Status (0x0f) plen 4
- Create Connection (0x01|0x0005) status 0x00 ncmd 1
- > HCI Event: Connect Complete (0x03) plen 11
- status 0x00 handle 12 bdaddr XX:XX:XX:XX:XX:XX type ACL encrypt 0x00
- < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
- > HCI Event: Read Remote Supported Features (0x0b) plen 11
- status 0x00 handle 12
- Features: 0xbc 0x04 0x82 0x78 0x00 0x06 0x59 0x83
- < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
- handle 12 page 1
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
- > HCI Event: Read Remote Extended Features (0x23) plen 13
- status 0x00 handle 12 page 1 max 1
- Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
- < HCI Command: Remote Name Request (0x01|0x0019) plen 10
- bdaddr XX:XX:XX:XX:XX:XX mode 2 clkoffset 0x0000
- > HCI Event: Command Status (0x0f) plen 4
- Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
- > HCI Event: Remote Name Req Complete (0x07) plen 255
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX name 'Logitech K810'
- < HCI Command: Authentication Requested (0x01|0x0011) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
- > HCI Event: Link Key Request (0x17) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: Command Complete (0x0e) plen 10
- Link Key Request Negative Reply (0x01|0x000c) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: IO Capability Request (0x31) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
- bdaddr XX:XX:XX:XX:XX:XX capability 0x01 oob 0x00 auth 0x03
- Capability: DisplayYesNo (OOB data not present)
- Authentication: Dedicated Bonding (MITM Protection)
- > HCI Event: Command Complete (0x0e) plen 10
- IO Capability Request Reply (0x01|0x002b) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: IO Capability Response (0x32) plen 9
- bdaddr XX:XX:XX:XX:XX:XX capability 0x02 oob 0x00 auth 0x04
- Capability: KeyboardOnly (OOB data not present)
- Authentication: General Bonding (No MITM Protection)
- > HCI Event: User Passkey Notification (0x3b) plen 10
- bdaddr XX:XX:XX:XX:XX:XX passkey 525617
- > HCI Event: Simple Pairing Complete (0x36) plen 7
- status 0x05 bdaddr XX:XX:XX:XX:XX:XX
- Error: Authentication Failure
- > HCI Event: Auth Complete (0x06) plen 3
- status 0x05 handle 12
- Error: Authentication Failure
- > HCI Event: Disconn Complete (0x05) plen 4
- status 0x00 handle 12 reason 0x13
- Reason: Remote User Terminated Connection
- < HCI Command: Create Connection (0x01|0x0005) plen 13
- bdaddr XX:XX:XX:XX:XX:XX ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
- Packet type: DM1 DM3 DM5 DH1 DH3 DH5
- > HCI Event: Command Status (0x0f) plen 4
- Create Connection (0x01|0x0005) status 0x00 ncmd 1
- > HCI Event: Connect Complete (0x03) plen 11
- status 0x00 handle 12 bdaddr XX:XX:XX:XX:XX:XX type ACL encrypt 0x00
- < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
- > HCI Event: Read Remote Supported Features (0x0b) plen 11
- status 0x00 handle 12
- Features: 0xbc 0x04 0x82 0x78 0x00 0x06 0x59 0x83
- < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
- handle 12 page 1
- > HCI Event: Command Status (0x0f) plen 4
- Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
- > HCI Event: Read Remote Extended Features (0x23) plen 13
- status 0x00 handle 12 page 1 max 1
- Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
- < HCI Command: Remote Name Request (0x01|0x0019) plen 10
- bdaddr XX:XX:XX:XX:XX:XX mode 2 clkoffset 0x0000
- > HCI Event: Command Status (0x0f) plen 4
- Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
- > HCI Event: Remote Name Req Complete (0x07) plen 255
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX name 'Logitech K810'
- < HCI Command: Authentication Requested (0x01|0x0011) plen 2
- handle 12
- > HCI Event: Command Status (0x0f) plen 4
- Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
- > HCI Event: Link Key Request (0x17) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: Command Complete (0x0e) plen 10
- Link Key Request Negative Reply (0x01|0x000c) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: IO Capability Request (0x31) plen 6
- bdaddr XX:XX:XX:XX:XX:XX
- < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
- bdaddr XX:XX:XX:XX:XX:XX capability 0x01 oob 0x00 auth 0x03
- Capability: DisplayYesNo (OOB data not present)
- Authentication: Dedicated Bonding (MITM Protection)
- > HCI Event: Command Complete (0x0e) plen 10
- IO Capability Request Reply (0x01|0x002b) ncmd 1
- status 0x00 bdaddr XX:XX:XX:XX:XX:XX
- > HCI Event: IO Capability Response (0x32) plen 9
- bdaddr XX:XX:XX:XX:XX:XX capability 0x02 oob 0x00 auth 0x04
- Capability: KeyboardOnly (OOB data not present)
- Authentication: General Bonding (No MITM Protection)
- > HCI Event: User Passkey Notification (0x3b) plen 10
- bdaddr XX:XX:XX:XX:XX:XX passkey 949942
- > HCI Event: Keypress Notification (0x3c) plen 7
- bdaddr XX:XX:XX:XX:XX:XX type 0
- > HCI Event: Simple Pairing Complete (0x36) plen 7
- status 0x05 bdaddr XX:XX:XX:XX:XX:XX
- Error: Authentication Failure
- > HCI Event: Auth Complete (0x06) plen 3
- status 0x05 handle 12
- Error: Authentication Failure
- > HCI Event: Disconn Complete (0x05) plen 4
- status 0x00 handle 12 reason 0x13
- Reason: Remote User Terminated Connection
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement