Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Linux on physical CPU 0x0
- Linux version 3.9.8+ (root@media) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 PREEMPT Tue Jul 2 17:38:12 CEST 2013
- CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: BCM2708
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 98304
- free_area_init_node: node 0, pgdat c0412690, node_mem_map c0450000
- Normal zone: 768 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 98304 pages, LIFO batch:31
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
- Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708.boardrev=0xe bcm2708.serial=0x8e39672 smsc95xx.macaddr=B8:27:EB:E3:96:72 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=xbian-root-btrfs rootfsopts=subvol=root/@,noatime,compress=lzo,thread_pool=1,space_cache,autodefrag rootfstype=btrfs rootwait=10 smsc95xx.turbo_mode=N elevator=noop nohdparm splash logo.nologo quiet loglevel=0 noswap mod_scsi.scan=async
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- __ex_table already sorted, skipping sort
- Memory: 384MB = 384MB total
- Memory: 382316k/382316k available, 10900k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
- lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc03c9494 (3846 kB)
- .init : 0xc03ca000 - 0xc03e7364 ( 117 kB)
- .data : 0xc03e8000 - 0xc0412d20 ( 172 kB)
- .bss : 0xc0412d20 - 0xc044f23c ( 242 kB)
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:330
- sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- Switching to timer-based delay loop
- Console: colour dummy device 80x30
- console [tty1] enabled
- Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0xc02e2160 - 0xc02e2198
- devtmpfs: initialized
- NET: Registered protocol family 16
- DMA: preallocated 4096 KiB pool for atomic coherent allocations
- bcm2708.uart_clock = 0
- hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- mailbox: Broadcom VideoCore Mailbox driver
- bcm2708_vcio: mailbox at f200b880
- bcm_power: Broadcom power driver
- bcm_power_open() -> 0
- bcm_power_request(0, 8)
- bcm_mailbox_read -> 00000080, 0
- bcm_power_request -> 0
- Serial: AMBA PL011 UART driver
- dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switching to clocksource stc
- FS-Cache: Loaded
- CacheFiles: Loaded
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- Unpacking initramfs...
- Freeing initrd memory: 2956K
- bcm2708_dma: DMA manager at f2007000
- bcm2708_gpio: bcm2708_gpio_probe c03f4890
- vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- audit: initializing netlink socket (disabled)
- type=2000 audit(2.620:1): initialized
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 752
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered (default)
- crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
- crc32: self tests passed, processed 225944 bytes in 2469000 nsec
- crc32c: CRC_LE_BITS = 64
- crc32c: self tests passed, processed 225944 bytes in 910000 nsec
- BCM2708FB: allocated DMA memory 579d0000
- BCM2708FB: allocated DMA channel 0 @ f2007000
- Console: switching to colour frame buffer device 90x30
- vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
- usbcore: registered new interface driver smsc95xx
- usbcore: registered new interface driver cdc_ncm
- dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- Core Release: 2.80a
- Setting default values for core params
- Finished setting default values for core params
- Using Buffer DMA mode
- Periodic Transfer Interrupt Enhancement - disabled
- Multiprocessor Interrupt Enhancement - disabled
- OTG VER PARAM: 0, OTG VER FLAG: 0
- Dedicated Tx FIFOs mode
- dwc_otg: Microframe scheduler enabled
- dwc_otg bcm2708_usb: DWC OTG Controller
- dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- Init: Port Power? op_state=1
- Init: Power Port (0)
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: DWC OTG Controller
- usb usb1: Manufacturer: Linux 3.9.8+ dwc_otg_hcd
- usb usb1: SerialNumber: bcm2708_usb
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- dwc_otg: FIQ enabled
- dwc_otg: NAK holdoff enabled
- dwc_otg: FIQ split fix enabled
- Module dwc_common_port init
- bcm2835-cpufreq: min=700000 max=840000 cur=700000
- bcm2835-cpufreq: switching to governor performance
- bcm2835-cpufreq: switching to governor performance
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci: Enable low-latency mode
- mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- sdhci-pltfm: SDHCI platform and OF driver helper
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP: cubic registered
- NET: Registered protocol family 17
- Key type dns_resolver registered
- VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- registered taskstats version 1
- Freeing init memory: 116K
- mmc0: read SD Status register (SSR) after 2 attempts
- mmc0: new high speed SDHC card at address 0002
- mmcblk0: mmc0:0002 00000 3.70 GiB
- mmcblk0: p1 p2
- Indeed it is in host mode hprt0 = 00021501
- udevd[57]: starting version 175
- usb 1-1: new high-speed USB device number 2 using dwc_otg
- Indeed it is in host mode hprt0 = 00001101
- usb 1-1: New USB device found, idVendor=0424, idProduct=9512
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 3 ports detected
- raid6: int32x1 44 MB/s
- raid6: int32x2 62 MB/s
- usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- raid6: int32x4 68 MB/s
- raid6: int32x8 68 MB/s
- raid6: using algorithm int32x4 (68 MB/s)
- raid6: using intx1 recovery algorithm
- xor: measuring software checksum speed
- usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- smsc95xx v1.0.4
- arm4regs : 1172.000 MB/sec
- 8regs : 564.400 MB/sec
- 32regs : 530.000 MB/sec
- xor: using function: arm4regs (1172.000 MB/sec)
- smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e3:96:72
- usb 1-1.2: new low-speed USB device number 4 using dwc_otg
- Btrfs loaded
- device label xbian-root-btrfs devid 1 transid 5090 /dev/mmcblk0p2
- usb 1-1.2: New USB device found, idVendor=1d57, idProduct=ad02
- usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
- hid-generic 0003:1D57:AD02.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [HID 1d57:ad02] on usb-bcm2708_usb-1.2/input0
- input: HID 1d57:ad02 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
- hid-generic 0003:1D57:AD02.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1d57:ad02] on usb-bcm2708_usb-1.2/input1
- usb 1-1.3: new high-speed USB device number 5 using dwc_otg
- usb 1-1.3: New USB device found, idVendor=148f, idProduct=3070
- usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1.3: Product: 802.11 n WLAN
- usb 1-1.3: Manufacturer: Ralink
- usb 1-1.3: SerialNumber: 1.0
- device label xbian-root-btrfs devid 1 transid 5090 /dev/mmcblk0p2
- btrfs: use lzo compression
- btrfs: enabling auto defrag
- btrfs: disk space caching is enabled
- Btrfs detected SSD devices, enabling SSD mode
- btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
- btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
- init: frandom pre-start process (242) terminated with status 1
- init: mounted-proc main process (249) terminated with status 1
- FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- device label xbian-root-btrfs devid 1 transid 5090 /dev/mmcblk0p2
- btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
- udevd[319]: starting version 175
- zram: module is from the staging directory, the quality is unknown, you have been warned.
- zram: Created 2 device(s) ...
- Adding 127996k swap on /dev/zram0. Priority:20 extents:1 across:127996k SS
- loop: module loaded
- Adding 122876k swap on /dev/loop0. Priority:0 extents:1 across:122876k
- mousedev: PS/2 mouse device common for all mice
- cfg80211: Calling CRDA to update world regulatory domain
- usb 1-1.3: reset high-speed USB device number 5 using dwc_otg
- phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3070, rf: 0005, rev: 0201.
- ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- usbcore: registered new interface driver rt2800usb
- device label xbian-root-btrfs devid 1 transid 5090 /dev/mmcblk0p2
- smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
- phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29.
- init: failsafe main process (573) killed by TERM signal
- init: xbmc-norun main process (581) killed by TERM signal
- wlan0: authenticate with 90:f6:52:58:82:02
- wlan0: send auth to 90:f6:52:58:82:02 (try 1/3)
- wlan0: authenticated
- wlan0: associate with 90:f6:52:58:82:02 (try 1/3)
- wlan0: RX AssocResp from 90:f6:52:58:82:02 (capab=0x431 status=0 aid=1)
- wlan0: associated
- Bluetooth: Core ver 2.16
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- init: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement