dmesg_8.3a

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p3 #0: Mon Jun 11 23:52:38 UTC 2012
    [email protected]:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz (1995.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 3221225472 (3072 MB)
avail memory = 3127816192 (2982 MB)
ACPI APIC Table: <INTEL  CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <TOSCPL TOSCPL00> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xf6000000-0xf6ffffff,0xd0000000-0xdfffffff,0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce 8700M GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1800-0x181f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2e00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1820-0x183f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2e00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf7504800-0xf7504bff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf7500000-0xf7503fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xf7100000-0xf7100fff irq 17 at device 0.0 on pci4
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:1e:ec:34:42:36
re0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib4
iwn0: <Intel(R) Wireless WiFi Link 4965> mem 0xf7200000-0xf7201fff irq 18 at device 0.0 on pci5
iwn0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib5
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1840-0x185f irq 23 at device 29.0 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x3e00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2e00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2e00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf7504c00-0xf7504fff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xf7004000-0xf7004fff irq 16 at device 4.0 on pci12
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem 0xf7006000-0xf70067ff,0xf7000000-0xf7003fff irq 17 at device 4.1 on pci12
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:83:ae:40:1c:c0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbc814000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:40:1c:c0
fwe0: Ethernet address: 02:02:3f:40:1c:c0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3f:83:ae:40:1c:c0 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci12: <mass storage> at device 4.2 (no driver attached)
pci12: <base peripheral, SD host controller> at device 4.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18a0-0x18af at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x18d8-0x18df,0x18cc-0x18cf,0x18d0-0x18d7,0x18c8-0x18cb,0x18e0-0x18ff mem 0xf7504000-0xf75047ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 3 3Gbps ports, PM not supported
ata2: <ATA channel> at channel 0 on atapci1
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci1
ata3: [ITHREAD]
ata4: <ATA channel> at channel 2 on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xce7ff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20F/ET02> at ata0-master UDMA33
ad4: 152627MB <TOSHIBA MK1637GSX DL030M> at ata2-master UDMA100 SATA 1.5Gb/s
ad8: 152627MB <TOSHIBA MK1637GSX DL030M> at ata4-master UDMA100 SATA 1.5Gb/s
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
hdac0: HDA Codec #0: Realtek ALC268
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
hdac0: HDA Codec #3: Realtek ALC268
pcm0: <HDA Realtek ALC268 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC268 PCM #1 Digital> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC268 PCM #0 Digital> at cad 3 nid 1 on hdac0
SMP: AP CPU #1 Launched!
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus6 usbus2
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6 usbus2
ugen6.2: <SAMSUNG> at usbus6
umass0: <Mass Storage> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
ugen0.2: <STMicroelectronics> at usbus0
ugen4.2: <vendor 0x1bcf> at usbus4
ums0: <vendor 0x1bcf USB Optical Wheel Mouse, class 0/0, rev 2.00/1.12, addr 2> on usbus4
ums0: 5 buttons and [XYZ] coordinates ID=0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Root mount waiting for: usbus2
ugen0.3: <vendor 0x0930> at usbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Android SGH-I997 0001> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ugen2.2: <Chicony Electronics Co., Ltd.> at usbus2
Trying to mount root from ufs:/dev/ad8s1a
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Setting hostuuid: 06bc14ea-fc4b-11dc-b00d-001eec344236.
Setting hostid: 0xe8b2b103.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <Android SGH-I997 0001> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
 kickstart
.
Starting file system checks:
/dev/ad8s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad8s1a: clean, 557528 free (3424 frags, 69263 blocks, 0.5% fragmentation)
/dev/ad8s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad8s1e: clean, 996367 free (79 frags, 124536 blocks, 0.0% fragmentation)
/dev/ad8s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad8s1f: clean, 25007388 free (50388 frags, 3119625 blocks, 0.2% fragmentation)
/dev/ad8s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad8s1d: clean, 1837819 free (1395 frags, 229553 blocks, 0.1% fragmentation)
Mounting local file systems:
.
Setting hostname: bsdcomputer.computerbsd.net
.
wlan0: Ethernet address: 00:1f:3b:38:07:99
Starting wpa_supplicant.
Starting Network: lo0 re0 iwn0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0xc
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
	ether 00:1e:ec:34:42:36
	inet6 fe80::21e:ecff:fe34:4236%re0 prefixlen 64 tentative scopeid 0x4
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
	media: Ethernet autoselect (none)
	status: no carrier
iwn0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:1f:3b:38:07:99
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
	status: associated
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding:
0
 ->
0

iwn0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0xc
net.inet6.ip6.accept_rtadv:
0
 ->
1

add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
Starting devd.
Cannot 'start' webcamd. Set webcamd_enable to
YES in /etc/rc.conf or use 'onestart'
instead of 'start'.
umodem0: <CDC Abstract Control Model ACM> on usbus6
umodem0: data interface 1, has no CM over data, has no break
Cannot 'start' webcamd. Set webcamd_enable to
YES in /etc/rc.conf or use 'onestart'
instead of 'start'.
Cannot 'start' webcamd. Set webcamd_enable to
YES in /etc/rc.conf or use 'onestart'
instead of 'start'.
Starting ums0 moused
.
ubt0: <vendor 0x0930 product 0x0508, class 224/1, rev 2.00/19.15, addr 3> on usbus0
kldload:
can't load ng_ubt
:
File exists
Cannot 'start' webcamd. Set webcamd_enable to
YES in /etc/rc.conf or use 'onestart'
instead of 'start'.
Cannot 'start' webcamd. Set webcamd_enable to
YES in /etc/rc.conf or use 'onestart'
instead of 'start'.
kldload:
can't load ng_ubt
:
File exists
kldload:
can't load ng_ubt
:
File exists
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/kde4/lib /usr/local/lib /usr/local/lib/alsa-lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/event2 /usr/local/lib/evolution/2.32 /usr/local/lib/ffmpeg1 /usr/local/lib/gcc46 /usr/local/lib/graphviz /usr/local/lib/libxul /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/speech-dispatcher /usr/local/lib/wine
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
Additional ABI support:
 linux
.
Clearing /tmp (X related).
Updating motd:
.
Starting fusefs.
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
Mounting late file systems:
.
Starting dbus.
Starting hald.
Configuring syscons:
 blanktime
.
Updating KDM configuration.
Information: reading pre-existing kdmrc /usr/local/kde4/share/config/kdm/kdmrc (config version 2.4)
Performing sanity check on apache22 configuration:
httpd: apr_sockaddr_info_get() failed for bsdcomputer.computerbsd.net
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
Syntax OK
Starting apache22.
httpd: apr_sockaddr_info_get() failed for bsdcomputer.computerbsd.net
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
/etc/rc: WARNING: failed to start apache22
Starting cron.
Starting background file system checks in 60 seconds.

Wed Dec  4 12:07:27 UTC 2013
Dec  4 12:09:19 bsdcomputer pulseaudio[2013]: pid.c: Daemon already running.
Dec  4 12:10:40 bsdcomputer login: ROOT LOGIN (root) ON ttyv6