Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl -a -d ata /dev/sda (otherroot)
- smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
- Home page is http://smartmontools.sourceforge.net/
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
- Device Model: ST3160023AS
- Serial Number: 5MT12APX
- Firmware Version: 8.12
- User Capacity: 160,000,000,000 bytes
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 6
- ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
- Local Time is: Fri Jul 8 10:55:09 2011 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 249) Self-test routine in progress...
- 90% of test remaining.
- Total time to complete Offline
- data collection: ( 430) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 94) minutes.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 064 051 006 Pre-fail Always - 176905991
- 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1008
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 268453950
- 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 24098
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 924
- 194 Temperature_Celsius 0x0022 029 047 000 Old_age Always - 29 (0 12 0 0)
- 195 Hardware_ECC_Recovered 0x001a 064 051 000 Old_age Always - 176905991
- 197 Current_Pending_Sector 0x0012 100 098 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 098 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 170 000 Old_age Always - 124
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 155 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 155 occurred at disk power-on lifetime: 15781 hours (657 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 f8 8d 9b e0 Error: UNC 1 sectors at LBA = 0x009b8df8 = 10194424
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 f7 8d 9b e0 00 00:25:01.593 READ DMA EXT
- 35 00 80 ff 98 e2 e0 00 00:25:01.593 WRITE DMA EXT
- 35 00 80 47 05 e1 e0 00 00:25:01.592 WRITE DMA EXT
- 35 00 80 9f 4a e0 e0 00 00:25:01.592 WRITE DMA EXT
- 35 00 80 c7 04 e0 e0 00 00:25:01.583 WRITE DMA EXT
- Error 154 occurred at disk power-on lifetime: 15781 hours (657 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 f8 8d 9b e0 Error: UNC 1 sectors at LBA = 0x009b8df8 = 10194424
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 f7 8d 9b e0 00 00:24:57.742 READ DMA EXT
- 35 00 80 7f 98 e2 e0 00 00:24:57.727 WRITE DMA EXT
- 35 00 80 a7 c4 de e0 00 00:24:57.726 WRITE DMA EXT
- 35 00 80 9f 5e de e0 00 00:24:53.864 WRITE DMA EXT
- 35 00 80 17 d3 db e0 00 00:24:53.863 WRITE DMA EXT
- Error 153 occurred at disk power-on lifetime: 15781 hours (657 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 f8 8d 9b e0 Error: UNC 1 sectors at LBA = 0x009b8df8 = 10194424
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 f7 8d 9b e0 00 00:24:50.033 READ DMA EXT
- 35 00 80 ff 97 e2 e0 00 00:24:50.033 WRITE DMA EXT
- 35 00 80 bf e3 da e0 00 00:24:50.032 WRITE DMA EXT
- 35 00 80 17 9e da e0 00 00:24:53.864 WRITE DMA EXT
- 35 00 80 f7 fa d9 e0 00 00:24:53.863 WRITE DMA EXT
- Error 152 occurred at disk power-on lifetime: 15781 hours (657 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 f8 8d 9b e0 Error: UNC 1 sectors at LBA = 0x009b8df8 = 10194424
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 f7 8d 9b e0 00 00:24:50.033 READ DMA EXT
- 35 00 80 7f 97 e2 e0 00 00:24:50.033 WRITE DMA EXT
- 25 00 01 00 00 00 e0 00 00:24:50.032 READ DMA EXT
- 35 00 80 47 ac e1 e0 00 00:24:50.022 WRITE DMA EXT
- 25 00 40 67 dc 6d e0 00 00:24:50.014 READ DMA EXT
- Error 151 occurred at disk power-on lifetime: 15781 hours (657 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 f8 8d 9b e0 Error: UNC 1 sectors at LBA = 0x009b8df8 = 10194424
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 f7 8d 9b e0 00 00:24:46.174 READ DMA EXT
- 35 00 80 47 ab e1 e0 00 00:24:42.350 WRITE DMA EXT
- 35 00 80 57 cc 74 e0 00 00:24:42.350 WRITE DMA EXT
- 35 00 80 d7 cb 74 e0 00 00:24:42.350 WRITE DMA EXT
- 25 00 08 8f f5 70 e0 00 00:24:42.349 READ DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short captive Interrupted (host reset) 60% 7189 -
- # 2 Short offline Completed without error 00% 2 -
- # 3 Short offline Self-test routine in progress 90% 24098 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement