Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Uncompressing Linux... done, booting the kernel.
- Booting Linux on physical CPU 0x0
- Linux version 3.15.0-rc1+ (bbrezillon@bbrezillon) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #20 Fri Apr 18 14
- CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Atmel SAMA5D36-EK
- bootconsole [earlycon0] enabled
- Memory policy: Data cache writeback
- AT91: Detected soc type: sama5d3
- AT91: Detected soc subtype: sama5d36
- AT91: sram at 0x300000 of 0x20000 mapped at 0xfef58000
- CPU: All CPU(s) started in SVC mode.
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- Kernel command line: console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs earlyprintk
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 513556K/524288K available (4250K kernel code, 178K rwdata, 1304K rodata, 169K init, 124K bss, 10732K reserved)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc0574d58 (5556 kB)
- .init : 0xc0575000 - 0xc059f7a4 ( 170 kB)
- .data : 0xc05a0000 - 0xc05cc960 ( 179 kB)
- .bss : 0xc05cc960 - 0xc05ebc7c ( 125 kB)
- NR_IRQS:16 nr_irqs:16 16
- sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
- Console: colour dummy device 80x30
- Calibrating delay loop... 175.51 BogoMIPS (lpj=877568)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0x20408f90 - 0x20408fe8
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- No ATAGs?
- AT91: Power Management
- gpio-at91 fffff200.gpio: at address fefff200
- gpio-at91 fffff400.gpio: at address fefff400
- gpio-at91 fffff600.gpio: at address fefff600
- gpio-at91 fffff800.gpio: at address fefff800
- gpio-at91 fffffa00.gpio: at address fefffa00
- pinctrl-at91 pinctrl.3: initialized AT91 pinctrl driver
- at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
- at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- at91_i2c f0014000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
- at91_i2c f0014000.i2c: AT91 i2c bus driver.
- at91_i2c f0018000.i2c: using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers
- at91_i2c f0018000.i2c: AT91 i2c bus driver.
- cfg80211: Calling CRDA to update world regulatory domain
- Switched to clocksource pit
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- futex hash table entries: 256 (order: -1, 3072 bytes)
- msgmni has been set to 1003
- io scheduler noop registered (default)
- f0020000.serial: ttyS2 at MMIO 0xf0020000 (irq = 29, base_baud = 4125000) is a ATMEL_SERIAL
- console [ttyS0] enabled
- console [ttyS0] enabled
- bootconsole [earlycon0] disabled
- bootconsole [earlycon0] disabled
- [drm] Initialized drm 1.1.0 20060810
- brd: module loaded
- loop: module loaded
- ssc f0008000.ssc: Atmel SSC device at 0xe0860000 (irq 25)
- atmel_nand_nfc 70000000.nfc: NFC is probed.
- atmel_nand 60000000.nand: Use On Flash BBT
- atmel_nand 60000000.nand: Using dma0chan4 for DMA transfers.
- nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
- nand: Micron MT29F2G08ABAEAWP
- nand: 256MiB, SLC, page size: 2048, OOB size: 64
- atmel_nand 60000000.nand: minimum ECC: 4 bits in 512 bytes
- atmel_nand 60000000.nand: Initialize PMECC params, cap: 4, sector: 512
- atmel_nand 60000000.nand: Using NFC Sram read
- Bad block table found at page 131008, version 0x01
- Bad block table found at page 130944, version 0x01
- 6 ofpart partitions found on MTD device atmel_nand
- Creating 6 MTD partitions on "atmel_nand":
- 0x000000000000-0x000000040000 : "at91bootstrap"
- 0x000000040000-0x0000000c0000 : "bootloader"
- 0x0000000c0000-0x000000180000 : "bootloader env"
- 0x000000800000-0x000010000000 : "rootfs"
- atmel_spi f0004000.spi: version: 0x213
- atmel_spi f0004000.spi: Using dma0chan5 (tx) and dma0chan6 (rx) for DMA transfers
- atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 24)
- m25p80 spi32766.0: unrecognized JEDEC id ffffff
- CAN device driver interface
- at91_can f000c000.can: device registered (reg_base=e0870000, irq=44)
- macb f0028000.ethernet (unregistered net_device): invalid hw address, using random
- libphy: MACB_mii_bus: probed
- macb f0028000.ethernet eth0: Cadence GEM at 0xf0028000 irq 45 (36:9e:f5:e4:69:38)
- macb f0028000.ethernet eth0: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=f0028000.etherne:07, i)
- macb f802c000.ethernet (unregistered net_device): invalid hw address, using random
- libphy: MACB_mii_bus: probed
- macb f802c000.ethernet eth1: Cadence MACB at 0xf802c000 irq 46 (ee:f7:8c:b4:91:bd)
- macb f802c000.ethernet eth1: attached PHY driver [Micrel KSZ8031] (mii_bus:phy_addr=f802c000.etherne:01, irq=53)
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-platform: EHCI generic platform driver
- ehci-atmel: EHCI Atmel driver
- atmel-ehci 700000.ehci: EHCI Host Controller
- atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
- atmel-ehci 700000.ehci: irq 50, io mem 0x00700000
- atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.15.0-rc1+ ehci_hcd
- usb usb1: SerialNumber: 700000.ehci
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 3 ports detected
- qt1070 1-001b: AT42QT1070 firmware version 15
- input: AT42QT1070 QTouch Sensor as /devices/ahb.1/apb.2/f0018000.i2c/i2c-1/1-001b/input/input0
- at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
- at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
- i2c /dev entries driver
- at91_wdt fffffe40.watchdog: watchdog is disabled
- at91_wdt: probe of fffffe40.watchdog failed with error -22
- atmel_aes f8038000.aes: version: 0x135
- atmel_aes f8038000.aes: Atmel AES - Using dma1chan0, dma1chan1 for DMA transfers
- atmel_sha f8034000.sha: version: 0x410
- atmel_sha f8034000.sha: using dma1chan2 for DMA transfers
- atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
- atmel_tdes f803c000.tdes: version: 0x701
- atmel_tdes f803c000.tdes: using dma1chan3, dma1chan4 for DMA transfers
- atmel_tdes f803c000.tdes: Atmel DES/TDES
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- iio iio:device0: Resolution used: 12 bits
- input: at91_adc as /devices/ahb.1/apb.2/f8018000.adc/input/input1
- TCP: cubic registered
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- can: controller area network core (rev 20120528 abi 9)
- NET: Registered protocol family 29
- can: raw protocol (rev 20120528)
- can: broadcast manager protocol (rev 20120528 t)
- can: netlink gateway (rev 20130117) max_hops=1
- panel panel.6: pins are not configured
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] No driver support for vblank timestamp query.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement