API tools faq
paste
Advertisement
Guest User

boot

a guest
Sep 7th, 2011
94
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.62 KB | None | 0 0
raw download clone embed print report
  1. Starting kernel ...
  2.  
  3. Uncompressing Linux.............................................................
  4. Linux version 2.6.32 (root@ubuntu) (gcc version 4.4.0 (GCC) ) #1 Wed Aug 10 23:1
  5. CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  6. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  7. Machine: OMAP3 Beagle Board
  8. Memory policy: ECC disabled, Data cache writeback
  9. OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m )
  10. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  11. Reserving 4194304 bytes SDRAM for VRAM
  12. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  13. Kernel command line: console=ttyS2,115200n8 androidboot.console=ttyS2 mem=256M y
  14. PID hash table entries: 1024 (order: 0, 4096 bytes)
  15. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  17. Memory: 256MB = 256MB total
  18. Memory: 249856KB available (4524K code, 825K data, 172K init, 0K highmem)
  19. Hierarchical RCU implementation.
  20. NR_IRQS:402
  21. Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  22. Reprogramming SDRC clock to 332000000 Hz
  23. GPMC revision 5.0
  24. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  25. Total of 96 interrupts on 1 active controller
  26. OMAP GPIO hardware version 2.5
  27. OMAP clockevent source: GPTIMER12 at 32768 Hz
  28. Console: colour dummy device 80x30
  29. Calibrating delay loop... 485.26 BogoMIPS (lpj=1896448)
  30. Mount-cache hash table entries: 512
  31. CPU: Testing write buffer coherency: ok
  32. regulator: core version 0.5
  33. NET: Registered protocol family 16
  34. Found NAND on CS0
  35. Registering NAND on CS0
  36. Unable to get DVI reset GPIO
  37. Target VDD1 OPP = 6, VDD2 OPP = 3
  38. OMAP DMA hardware revision 4.0
  39. bio: create slab <bio-0> at 0
  40. SCSI subsystem initialized
  41. usbcore: registered new interface driver usbfs
  42. usbcore: registered new interface driver hub
  43. usbcore: registered new device driver usb
  44. i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
  45. twl4030: PIH (irq 7) chaining IRQs 368..375
  46. twl4030: power (irq 373) chaining IRQs 376..383
  47. twl4030: gpio (irq 368) chaining IRQs 384..401
  48. Spurious irq 95: 0xffffffdf, please flush posted write for irq 56
  49. Spurious irq 95: 0xffffffdf, please flush posted write for irq 56
  50. regulator: VUSB1V5: 1500 mV normal standby
  51. regulator: VUSB1V8: 1800 mV normal standby
  52. regulator: VUSB3V1: 3100 mV normal standby
  53. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  54. regulator: VMMC1: 1850 <--> 3150 mV normal standby
  55. regulator: VDAC: 1800 mV normal standby
  56. regulator: VPLL2: 1800 mV normal standby
  57. regulator: VSIM: 1800 <--> 3000 mV normal standby
  58. regulator: VAUX3: 1800 mV normal standby
  59. regulator: VAUX4: 1800 mV normal standby
  60. i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz
  61. i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
  62. Switching to clocksource 32k_counter
  63. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  64. musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  65. NET: Registered protocol family 2
  66. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  67. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  68. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  69. TCP: Hash tables configured (established 8192 bind 8192)
  70. TCP reno registered
  71. UDP hash table entries: 256 (order: 0, 4096 bytes)
  72. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  73. NET: Registered protocol family 1
  74. RPC: Registered udp transport module.
  75. RPC: Registered tcp transport module.
  76. RPC: Registered tcp NFSv4.1 backchannel transport module.
  77. omap-iommu omap-iommu.0: isp registered
  78. NetWinder Floating Point Emulator V0.97 (double precision)
  79. ashmem: initialized
  80. VFS: Disk quotas dquot_6.5.2
  81. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  82. JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  83. yaffs Aug 10 2011 23:07:33 Installing.
  84. msgmni has been set to 488
  85. alg: No test for stdrng (krng)
  86. io scheduler noop registered
  87. io scheduler deadline registered
  88. io scheduler cfq registered (default)
  89. OMAP DSS rev 2.0
  90. OMAP DISPC rev 3.0
  91. OMAP VENC rev 2
  92. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  93. serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  94. serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  95. serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  96. console [ttyS2] enabled
  97. brd: module loaded
  98. loop: module loaded
  99. usbcore: registered new interface driver asix
  100. usbcore: registered new interface driver cdc_ether
  101. usbcore: registered new interface driver cdc_eem
  102. usbcore: registered new interface driver dm9601
  103. usbcore: registered new interface driver smsc95xx
  104. usbcore: registered new interface driver gl620a
  105. usbcore: registered new interface driver net1080
  106. usbcore: registered new interface driver plusb
  107. usbcore: registered new interface driver rndis_host
  108. usbcore: registered new interface driver cdc_subset
  109. usbcore: registered new interface driver zaurus
  110. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  111. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  112. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  113. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  114. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  115. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  116. hub 1-0:1.0: USB hub found
  117. hub 1-0:1.0: 3 ports detected
  118. Initializing USB Mass Storage driver...
  119. usbcore: registered new interface driver usb-storage
  120. USB Mass Storage support registered.
  121. android init
  122. android_probe pdata: c04cf53c
  123. android_bind
  124. android_usb gadget: android_usb ready
  125. musb_hdrc musb_hdrc: MUSB HDRC host driver
  126. musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
  127. hub 2-0:1.0: USB hub found
  128. hub 2-0:1.0: 1 port detected
  129. f_adb init
  130. android_register_function adb
  131. adb_bind_config
  132. f_mass_storage init
  133. android_register_function usb_mass_storage
  134. mice: PS/2 mouse device common for all mice
  135. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  136. i2c /dev entries driver
  137. Linux video capture interface: v2.00
  138. omap-iommu omap-iommu.0: isp: version 1.1
  139. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  140. mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
  141. usbcore: registered new interface driver usbhid
  142. usbhid: USB HID core driver
  143. logger: created 64K log 'log_main'
  144. logger: created 256K log 'log_events'
  145. logger: created 64K log 'log_radio'
  146. logger: created 64K log 'log_system'
  147. Advanced Linux Sound Architecture Driver Version 1.0.21.
  148. usbcore: registered new interface driver snd-usb-audio
  149. usb 1-2: new high speed USB device using ehci-omap and address 2
  150. hub 1-2:1.0: USB hub found
  151. hub 1-2:1.0: 4 ports detected
  152. mmc0: new SDHC card at address e624
  153. mmcblk0: mmc0:e624 SD04G 3.69 GiB
  154. mmcblk0: p1 p2 p3
  155. No device for DAI tlv320aic3x
  156. No device for DAI omap-mcbsp-dai-0
  157. No device for DAI omap-mcbsp-dai-1
  158. No device for DAI omap-mcbsp-dai-2
  159. No device for DAI omap-mcbsp-dai-3
  160. No device for DAI omap-mcbsp-dai-4
  161. OMAP3 Beagle SoC init
  162. asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
  163. Failed to add route LROUT->Headphone Jack
  164. ALSA device list:
  165. #0: omap3beagle (tlv320aic3x)
  166. TCP cubic registered
  167. NET: Registered protocol family 17
  168. NET: Registered protocol family 15
  169. Power Management for TI OMAP3.
  170. usb 1-2.1: new high speed USB device using ehci-omap and address 3
  171. ------------[ cut here ]------------
  172. WARNING: at arch/arm/mach-omap2/dpll.c:439 omap3_noncore_dpll_set_rate+0x220/0x)
  173. Modules linked in:
  174. [<c00399d8>] (unwind_backtrace+0x0/0xd8) from [<c005f840>] (warn_slowpath_commo)
  175. [<c005f840>] (warn_slowpath_common+0x48/0x60) from [<c00438b0>] (omap3_noncore_)
  176. [<c00438b0>] (omap3_noncore_dpll_set_rate+0x220/0x264) from [<c0041ec0>] (omap2)
  177. [<c0041ec0>] (omap2_clk_set_rate+0x20/0x2c) from [<c004881c>] (clk_set_rate+0x3)
  178. [<c004881c>] (clk_set_rate+0x38/0x88) from [<c00103f0>] (omap2_clk_set_freq+0x2)
  179. [<c00103f0>] (omap2_clk_set_freq+0x270/0x408) from [<c000fd6c>] (omap3_sr_init+)
  180. [<c000fd6c>] (omap3_sr_init+0xd4/0x154) from [<c0033344>] (do_one_initcall+0x5c)
  181. [<c0033344>] (do_one_initcall+0x5c/0x1b4) from [<c0008578>] (kernel_init+0x98/0)
  182. [<c0008578>] (kernel_init+0x98/0x110) from [<c0034ecc>] (kernel_thread_exit+0x0)
  183. ---[ end trace ff2a32b24e5c589e ]---
  184. Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
  185. IVA2 clocking rate: 520 MHz
  186. SmartReflex driver initialized
  187. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  188. omapdss DPI: Could not find exact pixel clock. Requested 23500 kHz, got 24000 kz
  189. regulator_init_complete: incomplete constraints, leaving VAUX3 on
  190. regulator_init_complete: incomplete constraints, leaving VDVI on
  191. regulator_init_complete: incomplete constraints, leaving VDAC on
  192. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  193. omapdss DPI error: display already enabled
  194. omap_vout omap_vout: 'dvi' Display already enabled
  195. omapdss DPI error: display already enabled
  196. omap_vout omap_vout: 'dvi' Display already enabled
  197. omap_vout omap_vout: Buffer Size = 3686400
  198. omap_vout omap_vout: : registered and initialized video device 0
  199. omap_vout omap_vout: Buffer Size = 3686400
  200. omap_vout omap_vout: : registered and initialized video device 1
  201. Waiting 1sec before mounting root device...
  202. eth0: register 'asix' at usb-ehci-omap.0-2.1, ASIX AX88772 USB 2.0 Ethernet, 001
  203. usb 1-2.3: new low speed USB device using ehci-omap and address 4
  204. kjournald starting. Commit interval 5 seconds
  205. EXT3-fs (mmcblk0p2): using internal journal
  206. EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  207. VFS: Mounted root (ext3 filesystem) on device 179:2.
  208. Freeing init memory: 172K
  209. Warning: unable to open an initial console.
  210. input: CHICONY HP Basic USB Keyboard as /devices/platform/ehci-omap.0/usb1/1-2/1
  211. generic-usb 0003:03F0:0024.0001: input: USB HID v1.10 Keyboard [CHICONY HP Basi0
  212. usb 1-2.4: new low speed USB device using ehci-omap and address 5
  213. init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  214. input: Microsoft Basic Optical Mouse as /devices/platform/ehci-omap.0/usb1/1-2/2
  215. generic-usb 0003:045E:0083.0002: input: USB HID v1.10 Mouse [Microsoft Basic Op0
  216. # enabling adb
  217. adb_open
  218. warning: `zygote' uses 32-bit capabilities (legacy support in use)
  219. alarm_set_rtc: no RTC, time will be lost on reboot
  220. request_suspend_state: wakeup (3->0) at 16391845706 (1970-01-02 00:00:04.192413)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!