Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
- BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
- BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
- DMI 2.3 present.
- last_pfn = 0x3fff0 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-AFFFF uncachable
- B0000-BFFFF write-combining
- C0000-C7FFF write-protect
- C8000-EFFFF uncachable
- F0000-FFFFF write-through
- MTRR variable ranges enabled:
- 0 base 000000000 mask FC0000000 write-back
- 1 base 0E0000000 mask FF8000000 write-combining
- 2 disabled
- 3 disabled
- 4 disabled
- 5 base 0E0000000 mask FF8000000 write-combining
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
- Scanning 1 areas for low memory corruption
- modified physical RAM map:
- modified: 0000000000000000 - 0000000000002000 (usable)
- modified: 0000000000002000 - 0000000000010000 (reserved)
- modified: 0000000000010000 - 000000000009fc00 (usable)
- modified: 000000000009fc00 - 00000000000a0000 (reserved)
- modified: 00000000000f0000 - 0000000000100000 (reserved)
- modified: 0000000000100000 - 000000003fff0000 (usable)
- modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
- modified: 000000003fff3000 - 0000000040000000 (ACPI data)
- modified: 00000000fec00000 - 00000000fec01000 (reserved)
- modified: 00000000fee00000 - 00000000fee01000 (reserved)
- modified: 00000000ffff0000 - 0000000100000000 (reserved)
- initial memory mapped : 0 - 01800000
- found SMP MP-table at [c00f4cd0] f4cd0
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 15000-1a000
- RAMDISK: 3f7d5000 - 3ffce026
- Allocated new RAMDISK: 00100000 - 008f9026
- Move RAMDISK from 000000003f7d5000 - 000000003ffce025 to 00100000 - 008f9025
- ACPI: RSDP 000f6640 00014 (v00 GBT )
- ACPI: RSDT 3fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
- ACPI: FACP 3fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
- ACPI: DSDT 3fff30c0 041E2 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
- ACPI: FACS 3fff0000 00040
- ACPI: APIC 3fff72c0 0005A (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
- ACPI: Local APIC address 0xfee00000
- 135MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- node 0 low ram: 00000000 - 377fe000
- node 0 bootmap 00016000 - 0001cf00
- (14 early reservations) ==> bootmem [0000000000 - 00377fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
- #3 [0001551000 - 000155708e] BRK ==> [0001551000 - 000155708e]
- #4 [00000f4ce0 - 0000100000] BIOS reserved ==> [00000f4ce0 - 0000100000]
- #5 [00000f4cd0 - 00000f4ce0] MP-table mpf ==> [00000f4cd0 - 00000f4ce0]
- #6 [000009fc00 - 00000f0d20] BIOS reserved ==> [000009fc00 - 00000f0d20]
- #7 [00000f0e48 - 00000f4cd0] BIOS reserved ==> [00000f0e48 - 00000f4cd0]
- #8 [00000f0d20 - 00000f0e48] MP-table mpc ==> [00000f0d20 - 00000f0e48]
- #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
- #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
- #11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
- #12 [0000100000 - 00008f9026] NEW RAMDISK ==> [0000100000 - 00008f9026]
- #13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0003fff0
- Movable zone start PFN for each node
- early_node_map[3] active PFN ranges
- 0: 0x00000000 -> 0x00000002
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0003fff0
- On node 0 totalpages: 262017
- free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3953 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 272 pages used for memmap
- HighMem zone: 34530 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x4008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 1 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 0000000000002000 - 0000000000010000
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
- PERCPU: Embedded 14 pages/cpu @c2000000 s34776 r0 d22568 u4194304
- pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259969
- Kernel command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 nomodeset BOOT_IMAGE=/boot/vmlinuz26
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- allocated 5242560 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Initializing HighMem for node 0 (000377fe:0003fff0)
- Memory: 1019748k/1048512k available (2895k kernel code, 27856k reserved, 1208k data, 408k init, 139208k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc1403000 - 0xc1469000 ( 408 kB)
- .data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
- .text : 0xc1000000 - 0xc12d3f1e (2895 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Hierarchical RCU implementation.
- NR_IRQS:512
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 1363.471 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 2728.56 BogoMIPS (lpj=4544903)
- Security Framework initialized
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- mce: CPU supports 4 MCE banks
- Performance Events: AMD PMU driver.
- ... version: 0
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 00007fffffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000000000f
- Checking 'hlt' instruction... OK.
- SMP alternatives: switching to UP code
- Freeing SMP alternatives: 11k freed
- ACPI: Core revision 20091214
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: AMD Duron(tm) p stepping 01
- Brought up 1 CPUs
- Total of 1 processors activated (2728.56 BogoMIPS).
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xfa110, last bus=1
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
- pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
- pci 0000:00:01.0: supports D1
- pci 0000:00:0a.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:00:0a.0: reg 14: [mem 0xea000000-0xea0001ff]
- pci 0000:00:0a.0: supports D1 D2
- pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:00:0a.0: PME# disabled
- pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
- pci 0000:00:10.0: supports D1 D2
- pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.0: PME# disabled
- pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
- pci 0000:00:10.1: supports D1 D2
- pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.1: PME# disabled
- pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f]
- pci 0000:00:10.2: supports D1 D2
- pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.2: PME# disabled
- pci 0000:00:10.3: reg 10: [mem 0xea001000-0xea0010ff]
- pci 0000:00:10.3: supports D1 D2
- pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.3: PME# disabled
- HPET not enabled in BIOS. You might try hpet=force boot option
- pci 0000:00:11.0: quirk: [io 0x4000-0x407f] claimed by vt8235 PM
- pci 0000:00:11.0: quirk: [io 0x5000-0x500f] claimed by vt8235 SMB
- pci 0000:00:11.1: reg 20: [io 0xe000-0xe00f]
- pci 0000:00:11.5: reg 10: [io 0xe400-0xe4ff]
- pci 0000:00:11.5: supports D1 D2
- pci 0000:00:13.0: reg 10: [io 0xe800-0xe8ff]
- pci 0000:00:13.0: reg 14: [mem 0xea002000-0xea0020ff]
- pci 0000:00:13.0: supports D1 D2
- pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:00:13.0: PME# disabled
- pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
- pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
- pci 0000:01:00.0: reg 18: [mem 0xe9000000-0xe900ffff]
- pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.1: reg 10: [mem 0xe9010000-0xe9013fff]
- pci 0000:01:00.1: supports D1 D2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
- ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
- ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
- ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 32 bytes
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 14 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
- system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
- system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
- system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
- system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
- system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
- system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
- system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
- system 00:02: [io 0x4000-0x407f] has been reserved
- system 00:02: [io 0x40f0-0x40ff] has been reserved
- system 00:02: [io 0x5000-0x500f] has been reserved
- system 00:03: [io 0x04d0-0x04d1] has been reserved
- system 00:03: [io 0x0290-0x029f] has been reserved
- system 00:03: [io 0x0800-0x0805] has been reserved
- pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- pci 0000:00:01.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
- pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- pci 0000:01:00.0: Boot video device
- PCI: CLS 32 bytes, default 32
- Unpacking initramfs...
- Freeing initrd memory: 8164k freed
- apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
- apm: overridden by ACPI.
- Scanning for low memory corruption every 60 seconds
- audit: initializing netlink socket (disabled)
- type=2000 audit(1304712131.156:1): initialized
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1736
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- input: Macintosh mouse button emulation as /devices/virtual/input/input0
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- PM: Resume from disk failed.
- registered taskstats version 1
- Initalizing network drop monitor service
- Freeing unused kernel memory: 408k freed
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
- ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
- ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
- ehci_hcd 0000:00:10.3: EHCI Host Controller
- ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:10.3: irq 21, io mem 0xea001000
- ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- Floppy drive(s): fd0 is 1.44M
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.0: UHCI Host Controller
- uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.1: UHCI Host Controller
- uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
- 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- FDC 0 is a post-1991 82077
- SCSI subsystem initialized
- uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:10.2: UHCI Host Controller
- uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- eth0: RealTek RTL8139 at 0xf822e000, 00:0d:61:00:36:07, IRQ 18
- libata version 3.00 loaded.
- ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
- ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
- pata_acpi 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
- pata_acpi 0000:00:11.1: PCI INT A disabled
- pata_via 0000:00:11.1: version 0.3.4
- pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
- scsi0 : pata_via
- scsi1 : pata_via
- ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
- ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
- usb 1-3: new high speed USB device using ehci_hcd and address 2
- ata1.00: HPA detected: current 321670847, native 321672960
- ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
- ata1.00: 321670847 sectors, multi 16: LBA48
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5
- hub 1-3:1.0: USB hub found
- hub 1-3:1.0: 4 ports detected
- ata2.00: ATAPI: PHILIPS DVDR1640P, P3.7, max UDMA/33
- ata2.01: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB00, max UDMA/33
- ata2.00: configured for UDMA/33
- ata2.01: configured for UDMA/33
- scsi 1:0:0:0: CD-ROM PHILIPS DVDR1640P P3.7 PQ: 0 ANSI: 5
- scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB00 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- usb 1-3.1: new low speed USB device using ehci_hcd and address 3
- sr 1:0:1:0: Attached scsi CD-ROM sr1
- sda1 sda2 < sda5 sda6 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- sr 1:0:1:0: Attached scsi generic sg2 type 5
- usb 1-3.2: new low speed USB device using ehci_hcd and address 4
- usbcore: registered new interface driver hiddev
- input: USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3.1/1-3.1:1.0/input/input1
- generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.3-3.1/input0
- input: USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3.1/1-3.1:1.1/input/input2
- generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.3-3.1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3.2/1-3.2:1.0/input/input3
- generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.3-3.2/input0
- UDF-fs: Partition marked readonly; forcing readonly mount
- aufs 2-standalone.tree-33-20100426
- loop: module loaded
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- aufs test_add:248:mount[630]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
- aufs test_add:248:mount[640]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
- udev: starting version 151
- input: PC Speaker as /devices/platform/pcspkr/input/input4
- lp: driver loaded but no devices found
- Linux agpgart interface v0.103
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
- ACPI: Power Button [PWRF]
- agpgart: Detected VIA KT400/KT400A/KT600 chipset
- ppdev: user-space parallel port driver
- agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- cfg80211: Calling CRDA to update world regulatory domain
- NET: Registered protocol family 23
- IT8705 SuperIO detected.
- parport_pc 00:0b: reported by Plug and Play ACPI
- parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- lp0: using parport0 (interrupt-driven).
- gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 890kHz
- rtc_cmos 00:05: RTC can wake from S4
- rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one year, y3k, 242 bytes nvram
- rtl8180 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [drm] Initialized drm 1.1.0 20060810
- HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- HDA Intel 0000:01:00.1: PCI: Disallowing DAC for device
- phy0: Selected rate control algorithm 'minstrel'
- phy0: hwaddr 00:22:cf:11:8a:ff, RTL8185vD + rtl8225
- ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
- ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
- VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
- VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
- [drm] VGACON disable radeon kernel modesetting.
- pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0
- hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- wlan0: direct probe to AP 00:19:cb:9e:ff:bc (try 1)
- wlan0: direct probe responded
- wlan0: authenticate with AP 00:19:cb:9e:ff:bc (try 1)
- wlan0: authenticated
- wlan0: associate with AP 00:19:cb:9e:ff:bc (try 1)
- wlan0: RX AssocResp from 00:19:cb:9e:ff:bc (capab=0x431 status=0 aid=3)
- wlan0: associated
- EXT4-fs (sda5): mounted filesystem with ordered data mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement