Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-36-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #79-Ubuntu SMP Tue Nov 8 22:29:26 UTC 2011 (Ubuntu 2.6.32-36.79-generic 2.6.32.46+drm33.20)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
- [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
- [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] DMI 2.5 present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CDFFF write-protect
- [ 0.000000] CE000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 100000000 mask FE0000000 write-back
- [ 0.000000] 1 base 120000000 mask FF0000000 write-back
- [ 0.000000] 2 base 000000000 mask F80000000 write-back
- [ 0.000000] 3 base 080000000 mask FC0000000 write-back
- [ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
- [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
- [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
- [ 0.000000] modified: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
- [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
- [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
- [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 3784f000 - 37fef7f3
- [ 0.000000] Allocated new RAMDISK: 008e5000 - 010857f3
- [ 0.000000] Move RAMDISK from 000000003784f000 - 0000000037fef7f2 to 008e5000 - 010857f2
- [ 0.000000] ACPI: RSDP 000f7910 00014 (v00 Shuttl)
- [ 0.000000] ACPI: RSDT cfee3000 00038 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP cfee3080 00074 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT cfee3100 045BE (v01 SHUTTL SG31V10 00001000 MSFT 03000000)
- [ 0.000000] ACPI: FACS cfe90000 00040
- [ 0.000000] ACPI: HPET cfee7780 00038 (v01 Shuttl Shuttle 42302E31 AWRD 00000098)
- [ 0.000000] ACPI: MCFG cfee77c0 0003C (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: SLIC cfee7800 00176 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: APIC cfee76c0 00084 (v01 Shuttl Shuttle 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2438MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008e0f18] TEXT DATA BSS ==> [0000100000 - 00008e0f18]
- [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
- [ 0.000000] #5 [00008e1000 - 00008e40ae] BRK ==> [00008e1000 - 00008e40ae]
- [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #7 [00008e5000 - 00010857f3] NEW RAMDISK ==> [00008e5000 - 00010857f3]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] found SMP MP-table at [c00f3680] f3680
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000cfe90
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cfe90
- [ 0.000000] On node 0 totalpages: 851487
- [ 0.000000] free_area_init_node: node 0, pgdat c079a7a0, node_mem_map c1087200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4878 pages used for memmap
- [ 0.000000] HighMem zone: 619396 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36312 r0 d21032 u1048576
- [ 0.000000] pcpu-alloc: s36312 r0 d21032 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844833
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-36-generic root=UUID=2c2d47f8-0f11-4c80-b3c7-51b351f11628 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
- [ 0.000000] allocated 17031680 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe90)
- [ 0.000000] Memory: 3344536k/3406400k available (4679k kernel code, 60268k reserved, 2124k data, 668k init, 2497096k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB)
- [ 0.000000] .data : 0xc0591c17 - 0xc07a4d48 (2124 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0591c17 (4679 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:440
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2601.982 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5203.96 BogoMIPS (lpj=10407928)
- [ 0.004017] Security Framework initialized
- [ 0.004034] AppArmor: AppArmor initialized
- [ 0.004040] Mount-cache hash table entries: 512
- [ 0.004146] Initializing cgroup subsys ns
- [ 0.004150] Initializing cgroup subsys cpuacct
- [ 0.004153] Initializing cgroup subsys memory
- [ 0.004159] Initializing cgroup subsys devices
- [ 0.004161] Initializing cgroup subsys freezer
- [ 0.004163] Initializing cgroup subsys net_cls
- [ 0.004182] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004184] CPU: L2 cache: 2048K
- [ 0.004186] CPU: Physical Processor ID: 0
- [ 0.004187] CPU: Processor Core ID: 0
- [ 0.004191] mce: CPU supports 6 MCE banks
- [ 0.004198] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004201] using mwait in idle threads.
- [ 0.004207] Performance Events: Core2 events, Intel PMU driver.
- [ 0.004213] ... version: 2
- [ 0.004215] ... bit width: 40
- [ 0.004216] ... generic registers: 2
- [ 0.004217] ... value mask: 000000ffffffffff
- [ 0.004219] ... max period: 000000007fffffff
- [ 0.004220] ... fixed-purpose events: 3
- [ 0.004222] ... event mask: 0000000700000003
- [ 0.004227] Checking 'hlt' instruction... OK.
- [ 0.022411] ACPI: Core revision 20090903
- [ 0.028008] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.028013] ftrace: allocating 21731 entries in 43 pages
- [ 0.032050] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.074251] CPU0: Intel(R) Pentium(R) CPU E5300 @ 2.60GHz stepping 0a
- [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 2048K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
- [ 0.160062] CPU1: Intel(R) Pentium(R) CPU E5300 @ 2.60GHz stepping 0a
- [ 0.160068] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.164018] Brought up 2 CPUs
- [ 0.164020] Total of 2 processors activated (10408.58 BogoMIPS).
- [ 0.164896] CPU0 attaching sched-domain:
- [ 0.164899] domain 0: span 0-1 level MC
- [ 0.164901] groups: 0 1
- [ 0.164906] CPU1 attaching sched-domain:
- [ 0.164907] domain 0: span 0-1 level MC
- [ 0.164909] groups: 1 0
- [ 0.164962] devtmpfs: initialized
- [ 0.164962] regulator: core version 0.5
- [ 0.164962] Time: 22:34:02 Date: 12/13/11
- [ 0.164962] NET: Registered protocol family 16
- [ 0.164962] Trying to unpack rootfs image as initramfs...
- [ 0.164962] EISA bus registered
- [ 0.164962] ACPI: bus type pci registered
- [ 0.164962] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.164962] PCI: MCFG area at e0000000 reserved in E820
- [ 0.164962] PCI: Using MMCONFIG for extended config space
- [ 0.164962] PCI: Using configuration type 1 for base access
- [ 0.168082] bio: create slab <bio-0> at 0
- [ 0.168665] ACPI: EC: Look up EC in DSDT
- [ 0.172829] ACPI: Interpreter enabled
- [ 0.172834] ACPI: (supports S0 S3 S4 S5)
- [ 0.172852] ACPI: Using IOAPIC for interrupt routing
- [ 0.176691] ACPI: No dock devices found.
- [ 0.176766] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.176865] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.176867] pci 0000:00:01.0: PME# disabled
- [ 0.176924] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
- [ 0.176963] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.176966] pci 0000:00:1b.0: PME# disabled
- [ 0.177025] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.177029] pci 0000:00:1c.0: PME# disabled
- [ 0.177087] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.177091] pci 0000:00:1c.1: PME# disabled
- [ 0.177136] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f]
- [ 0.177180] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f]
- [ 0.177223] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f]
- [ 0.177267] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f]
- [ 0.177316] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
- [ 0.177364] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.177368] pci 0000:00:1d.7: PME# disabled
- [ 0.177484] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
- [ 0.177488] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f)
- [ 0.177526] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
- [ 0.177532] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
- [ 0.177538] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
- [ 0.177543] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
- [ 0.177549] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f]
- [ 0.177587] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07]
- [ 0.177593] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903]
- [ 0.177598] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807]
- [ 0.177603] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703]
- [ 0.177608] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f]
- [ 0.177629] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.177633] pci 0000:00:1f.2: PME# disabled
- [ 0.177675] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
- [ 0.177724] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
- [ 0.177733] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.177741] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
- [ 0.177746] pci 0000:01:00.0: reg 24 io port: [0xbf00-0xbf7f]
- [ 0.177751] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
- [ 0.177812] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
- [ 0.177815] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
- [ 0.177819] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.177855] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
- [ 0.177858] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
- [ 0.177864] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
- [ 0.177919] pci 0000:03:00.0: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
- [ 0.177927] pci 0000:03:00.0: reg 18 io port: [0xce00-0xceff]
- [ 0.177952] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
- [ 0.177992] pci 0000:03:00.0: supports D1 D2
- [ 0.177993] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177998] pci 0000:03:00.0: PME# disabled
- [ 0.178038] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
- [ 0.178042] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
- [ 0.178047] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
- [ 0.178093] pci 0000:04:0a.0: reg 10 32bit mmio: [0xfdaff000-0xfdaff7ff]
- [ 0.178100] pci 0000:04:0a.0: reg 14 32bit mmio: [0xfdaf8000-0xfdafbfff]
- [ 0.178141] pci 0000:04:0a.0: supports D1 D2
- [ 0.178142] pci 0000:04:0a.0: PME# supported from D0 D1 D2 D3hot
- [ 0.178146] pci 0000:04:0a.0: PME# disabled
- [ 0.178177] pci 0000:00:1e.0: transparent bridge
- [ 0.178181] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
- [ 0.178184] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
- [ 0.178190] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
- [ 0.178205] pci_bus 0000:00: on NUMA node 0
- [ 0.178209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.178321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.178364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- [ 0.178417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.188383] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.188468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
- [ 0.188550] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.188631] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.188713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.188795] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.188878] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.188963] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 *15)
- [ 0.189063] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.189066] vgaarb: loaded
- [ 0.189167] SCSI subsystem initialized
- [ 0.189248] libata version 3.00 loaded.
- [ 0.189311] usbcore: registered new interface driver usbfs
- [ 0.189321] usbcore: registered new interface driver hub
- [ 0.189341] usbcore: registered new device driver usb
- [ 0.189442] ACPI: WMI: Mapper loaded
- [ 0.189444] PCI: Using ACPI for IRQ routing
- [ 0.189577] NetLabel: Initializing
- [ 0.189579] NetLabel: domain hash size = 128
- [ 0.189580] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.189591] NetLabel: unlabeled traffic allowed by default
- [ 0.189614] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.189619] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.189623] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.192121] Switching to clocksource tsc
- [ 0.193753] AppArmor: AppArmor Filesystem Enabled
- [ 0.193767] pnp: PnP ACPI init
- [ 0.193780] ACPI: bus type pnp registered
- [ 0.195835] pnp: PnP ACPI: found 14 devices
- [ 0.195837] ACPI: ACPI bus type pnp unregistered
- [ 0.195841] PnPBIOS: Disabled by ACPI PNP
- [ 0.195851] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.195853] system 00:01: ioport range 0x800-0x87f has been reserved
- [ 0.195855] system 00:01: ioport range 0x880-0x88f has been reserved
- [ 0.195862] system 00:0a: ioport range 0x400-0x4bf has been reserved
- [ 0.195868] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.195872] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
- [ 0.195875] system 00:0d: iomem range 0xcff00000-0xcfffffff could not be reserved
- [ 0.195877] system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
- [ 0.195880] system 00:0d: iomem range 0xcfe90000-0xcfefffff could not be reserved
- [ 0.195882] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
- [ 0.195884] system 00:0d: iomem range 0x100000-0xcfe8ffff could not be reserved
- [ 0.195887] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.195889] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
- [ 0.195891] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.195893] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.195896] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
- [ 0.195898] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
- [ 0.195900] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
- [ 0.230586] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.230590] pci 0000:00:01.0: IO window: 0xb000-0xbfff
- [ 0.230594] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
- [ 0.230597] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.230601] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
- [ 0.230604] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
- [ 0.230608] pci 0000:00:1c.0: MEM window: 0xfdb00000-0xfdbfffff
- [ 0.230612] pci 0000:00:1c.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
- [ 0.230618] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
- [ 0.230621] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
- [ 0.230625] pci 0000:00:1c.1: MEM window: 0xfdd00000-0xfddfffff
- [ 0.230629] pci 0000:00:1c.1: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
- [ 0.230634] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
- [ 0.230636] pci 0000:00:1e.0: IO window: 0xe000-0xefff
- [ 0.230641] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff
- [ 0.230644] pci 0000:00:1e.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
- [ 0.230659] alloc irq_desc for 16 on node -1
- [ 0.230661] alloc kstat_irqs on node -1
- [ 0.230668] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.230672] pci 0000:00:01.0: setting latency timer to 64
- [ 0.230680] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.230683] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.230690] alloc irq_desc for 17 on node -1
- [ 0.230692] alloc kstat_irqs on node -1
- [ 0.230695] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.230698] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.230704] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.230708] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.230710] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.230712] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
- [ 0.230714] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
- [ 0.230716] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.230718] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
- [ 0.230720] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff]
- [ 0.230722] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
- [ 0.230724] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
- [ 0.230726] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
- [ 0.230728] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff]
- [ 0.230730] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
- [ 0.230732] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
- [ 0.230734] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
- [ 0.230736] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
- [ 0.230738] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
- [ 0.230773] NET: Registered protocol family 2
- [ 0.230864] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.231136] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.231593] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.231831] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.231833] TCP reno registered
- [ 0.231914] NET: Registered protocol family 1
- [ 0.232026] pci 0000:01:00.0: Boot video device
- [ 0.232189] cpufreq-nforce2: No nForce2 chipset.
- [ 0.232214] Scanning for low memory corruption every 60 seconds
- [ 0.232314] audit: initializing netlink socket (disabled)
- [ 0.232324] type=2000 audit(1323815642.231:1): initialized
- [ 0.240126] highmem bounce pool size: 64 pages
- [ 0.240131] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.241370] VFS: Disk quotas dquot_6.5.2
- [ 0.241419] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.241888] fuse init (API version 7.13)
- [ 0.241959] msgmni has been set to 1657
- [ 0.242138] alg: No test for stdrng (krng)
- [ 0.242179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.242182] io scheduler noop registered
- [ 0.242183] io scheduler anticipatory registered
- [ 0.242185] io scheduler deadline registered
- [ 0.242215] io scheduler cfq registered (default)
- [ 0.242328] alloc irq_desc for 24 on node -1
- [ 0.242330] alloc kstat_irqs on node -1
- [ 0.242337] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.242343] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.242428] alloc irq_desc for 25 on node -1
- [ 0.242430] alloc kstat_irqs on node -1
- [ 0.242436] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.242443] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.242541] alloc irq_desc for 26 on node -1
- [ 0.242542] alloc kstat_irqs on node -1
- [ 0.242548] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
- [ 0.242555] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.242628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.242695] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.242772] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.242775] ACPI: Power Button [PWRB]
- [ 0.242820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.242822] ACPI: Power Button [PWRF]
- [ 0.242861] fan PNP0C0B:00: registered as cooling_device0
- [ 0.242865] ACPI: Fan [FAN] (on)
- [ 0.243083] processor LNXCPU:00: registered as cooling_device1
- [ 0.243113] processor LNXCPU:01: registered as cooling_device2
- [ 0.244906] thermal LNXTHERM:01: registered as thermal_zone0
- [ 0.244912] ACPI: Thermal Zone [THRM] (-73 C)
- [ 0.246104] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.247205] brd: module loaded
- [ 0.247593] loop: module loaded
- [ 0.247656] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 0.247734] ata_piix 0000:00:1f.1: version 2.13
- [ 0.247746] alloc irq_desc for 18 on node -1
- [ 0.247747] alloc kstat_irqs on node -1
- [ 0.247753] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.247784] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.247867] scsi0 : ata_piix
- [ 0.247928] scsi1 : ata_piix
- [ 0.248426] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
- [ 0.248428] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
- [ 0.248446] alloc irq_desc for 19 on node -1
- [ 0.248447] alloc kstat_irqs on node -1
- [ 0.248451] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.248455] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 0.248469] isapnp: Scanning for PnP cards...
- [ 0.248485] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.248663] ata2: port disabled. ignoring.
- [ 0.248675] scsi2 : ata_piix
- [ 0.248717] scsi3 : ata_piix
- [ 0.249189] ata3: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
- [ 0.249191] ata4: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
- [ 0.249457] Fixed MDIO Bus: probed
- [ 0.249484] PPP generic driver version 2.4.2
- [ 0.249515] tun: Universal TUN/TAP device driver, 1.6
- [ 0.249517] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.249586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.249601] alloc irq_desc for 23 on node -1
- [ 0.249602] alloc kstat_irqs on node -1
- [ 0.249605] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.249616] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.249619] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.249643] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.249662] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 0.249672] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.253567] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.253590] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
- [ 0.301066] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.301188] usb usb1: configuration #1 chosen from 1 choice
- [ 0.301214] hub 1-0:1.0: USB hub found
- [ 0.301225] hub 1-0:1.0: 8 ports detected
- [ 0.301286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.301304] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.301348] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.301357] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.301360] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.301388] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.301411] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
- [ 0.301491] usb usb2: configuration #1 chosen from 1 choice
- [ 0.301511] hub 2-0:1.0: USB hub found
- [ 0.301517] hub 2-0:1.0: 2 ports detected
- [ 0.301554] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.301558] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.301561] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.301584] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 0.301604] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
- [ 0.301670] usb usb3: configuration #1 chosen from 1 choice
- [ 0.301690] hub 3-0:1.0: USB hub found
- [ 0.301695] hub 3-0:1.0: 2 ports detected
- [ 0.301731] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.301735] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.301738] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.301768] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 0.301796] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
- [ 0.301868] usb usb4: configuration #1 chosen from 1 choice
- [ 0.301890] hub 4-0:1.0: USB hub found
- [ 0.301896] hub 4-0:1.0: 2 ports detected
- [ 0.301929] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 0.301934] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 0.301936] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 0.301959] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 0.301984] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
- [ 0.302050] usb usb5: configuration #1 chosen from 1 choice
- [ 0.302072] hub 5-0:1.0: USB hub found
- [ 0.302077] hub 5-0:1.0: 2 ports detected
- [ 0.302152] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.302153] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.302282] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.302357] mice: PS/2 mouse device common for all mice
- [ 0.302436] rtc_cmos 00:04: RTC can wake from S4
- [ 0.302465] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.302487] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.302571] device-mapper: uevent: version 1.0.3
- [ 0.322877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 0.326812] Freeing initrd memory: 7809k freed
- [ 0.346219] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.347741] device-mapper: multipath: version 1.1.0 loaded
- [ 0.347744] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.347853] EISA: Probing bus 0 at eisa.0
- [ 0.347877] EISA: Detected 0 cards.
- [ 0.347937] cpuidle: using governor ladder
- [ 0.347938] cpuidle: using governor menu
- [ 0.348284] TCP cubic registered
- [ 0.348407] NET: Registered protocol family 10
- [ 0.349075] NET: Registered protocol family 17
- [ 0.349127] Using IPI No-Shortcut mode
- [ 0.349186] PM: Resume from disk failed.
- [ 0.349197] registered taskstats version 1
- [ 0.349463] Magic number: 7:378:603
- [ 0.349536] rtc_cmos 00:04: setting system clock to 2011-12-13 22:34:02 UTC (1323815642)
- [ 0.349539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.349540] EDD information not available.
- [ 0.433227] ata1.00: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB00, max UDMA/33
- [ 0.434305] ata3.01: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B05, max UDMA/133
- [ 0.434307] ata3.01: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.447921] ata1.00: configured for UDMA/33
- [ 0.448331] ata3.01: configured for UDMA/133
- [ 0.606807] isapnp: No Plug & Play device found
- [ 0.899652] usb 4-2: new full speed USB device using uhci_hcd and address 2
- [ 1.071052] usb 4-2: configuration #1 chosen from 1 choice
- [ 21.816043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 21.816049] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
- [ 21.816068] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
- [ 21.816070] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
- [ 21.816074] ata1.00: status: { DRDY }
- [ 26.856019] ata1: link is slow to respond, please be patient (ready=0)
- [ 31.840019] ata1: device not ready (errno=-16), forcing hardreset
- [ 31.840028] ata1: soft resetting link
- [ 32.020219] ata1.00: configured for UDMA/33
- [ 32.020699] ata1: EH complete
- [ 52.816041] ata1.00: limiting speed to UDMA/25:PIO4
- [ 52.816046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 52.816051] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
- [ 52.816068] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
- [ 52.816070] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
- [ 52.816075] ata1.00: status: { DRDY }
- [ 57.856019] ata1: link is slow to respond, please be patient (ready=0)
- [ 62.840019] ata1: device not ready (errno=-16), forcing hardreset
- [ 62.840028] ata1: soft resetting link
- [ 63.020219] ata1.00: configured for UDMA/25
- [ 63.020712] ata1: EH complete
- [ 83.804057] ata1.00: limiting speed to PIO4
- [ 83.804062] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 83.804067] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
- [ 83.804085] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
- [ 83.804087] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
- [ 83.804092] ata1.00: status: { DRDY }
- [ 88.844019] ata1: link is slow to respond, please be patient (ready=0)
- [ 93.828019] ata1: device not ready (errno=-16), forcing hardreset
- [ 93.828027] ata1: soft resetting link
- [ 94.008717] ata1.00: configured for PIO4
- [ 94.009206] ata1: EH complete
- [ 94.009753] scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB00 PQ: 0 ANSI: 5
- [ 94.013772] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- [ 94.013777] Uniform CD-ROM driver Revision: 3.20
- [ 94.013914] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 94.013958] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 94.014061] scsi 2:0:1:0: Direct-Access ATA WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5
- [ 94.014144] sd 2:0:1:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
- [ 94.014152] sd 2:0:1:0: Attached scsi generic sg1 type 0
- [ 94.014185] sd 2:0:1:0: [sda] Write Protect is off
- [ 94.014187] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
- [ 94.014212] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 94.014325] sda: sda1 sda2 < sda5 sda6 >
- [ 94.043264] sd 2:0:1:0: [sda] Attached SCSI disk
- [ 94.043274] Freeing unused kernel memory: 668k freed
- [ 94.043589] Write protecting the kernel text: 4680k
- [ 94.043623] Write protecting the kernel read-only data: 1844k
- [ 94.065837] udev: starting version 151
- [ 94.126669] sky2 driver version 1.25
- [ 94.126708] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 94.126721] sky2 0000:03:00.0: setting latency timer to 64
- [ 94.126746] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 5
- [ 94.126832] alloc irq_desc for 27 on node -1
- [ 94.126834] alloc kstat_irqs on node -1
- [ 94.126847] sky2 0000:03:00.0: irq 27 for MSI/MSI-X
- [ 94.136276] sky2 eth0: addr 00:30:1b:47:4b:e1
- [ 94.167897] usbcore: registered new interface driver hiddev
- [ 94.169897] ohci1394 0000:04:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 94.170661] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
- [ 94.170740] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
- [ 94.175563] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input5
- [ 94.175653] generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
- [ 94.175669] usbcore: registered new interface driver usbhid
- [ 94.175671] usbhid: v2.6:USB HID core driver
- [ 94.184153] FDC 0 is a post-1991 82077
- [ 94.224564] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdaff000-fdaff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
- [ 94.391665] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 95.496102] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301b0000474cd7]
- [ 95.540296] Adding 3905528k swap on /dev/sda5. Priority:-1 extents:1 across:3905528k
- [ 95.653674] udev: starting version 151
- [ 96.868129] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 96.868151] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 96.871599] parport_pc 00:08: reported by Plug and Play ACPI
- [ 96.871655] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- [ 96.898064] Linux agpgart interface v0.103
- [ 96.898736] intel_rng: FWH not detected
- [ 96.909752] ppdev: user-space parallel port driver
- [ 96.916221] vga16fb: initializing
- [ 96.916224] vga16fb: mapped to 0xc00a0000
- [ 96.916415] fb0: VGA16 VGA frame buffer device
- [ 97.114642] nvidia: module license 'NVIDIA' taints kernel.
- [ 97.114646] Disabling lock debugging due to kernel taint
- [ 97.748291] lp0: using parport0 (interrupt-driven).
- [ 97.802075] type=1505 audit(1323812139.950:2): operation="profile_load" pid=524 name="/sbin/dhclient3"
- [ 97.802625] type=1505 audit(1323812139.950:3): operation="profile_load" pid=524 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 97.802927] type=1505 audit(1323812139.950:4): operation="profile_load" pid=524 name="/usr/lib/connman/scripts/dhclient-script"
- [ 97.803302] type=1505 audit(1323812139.950:5): operation="profile_replace" pid=513 name="/sbin/dhclient3"
- [ 97.803850] type=1505 audit(1323812139.950:6): operation="profile_replace" pid=513 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 97.804152] type=1505 audit(1323812139.954:7): operation="profile_replace" pid=513 name="/usr/lib/connman/scripts/dhclient-script"
- [ 97.811158] hda_codec: ALC888: BIOS auto-probing.
- [ 97.812583] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
- [ 97.991568] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 97.991576] nvidia 0000:01:00.0: setting latency timer to 64
- [ 97.991581] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 97.992437] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
- [ 98.335326] Console: switching to colour frame buffer device 80x30
- [ 100.042038] EXT4-fs (sda6): mounted filesystem with ordered data mode
- [ 100.953275] type=1505 audit(1323812143.102:8): operation="profile_replace" pid=814 name="/sbin/dhclient3"
- [ 100.953834] type=1505 audit(1323812143.102:9): operation="profile_replace" pid=814 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 100.954142] type=1505 audit(1323812143.102:10): operation="profile_replace" pid=814 name="/usr/lib/connman/scripts/dhclient-script"
- [ 100.991978] type=1505 audit(1323812143.138:11): operation="profile_load" pid=813 name="/usr/share/gdm/guest-session/Xsession"
- [ 101.146036] sky2 eth0: enabling interface
- [ 101.148434] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 102.875736] __ratelimit: 21 callbacks suppressed
- [ 102.875738] type=1505 audit(1323812145.022:19): operation="profile_replace" pid=976 name="/usr/sbin/mysqld"
- [ 102.884744] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
- [ 102.884843] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement