API tools faq
paste
Advertisement
Guest User

Am335X Custom Board log

a guest
Oct 10th, 2014
211
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.05 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.04-dirty (Jul 07 2014 - 10:22:02)
  2.  
  3. I2C: ready
  4. DRAM: 512 MiB
  5. WARNING: Caches not enabled
  6. NAND: No NAND device found!!!
  7. 0 MiB
  8. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  9. *** Warning - readenv() failed, using default environment
  10.  
  11. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  12. musb-hdrc: MHDRC RTL version 2.0
  13. musb-hdrc: setup fifo_mode 4
  14. musb-hdrc: 28/31 max ep, 16384/16384 memory
  15. USB Peripheral mode controller at 47401000 using PIO, IRQ 0
  16. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  17. musb-hdrc: MHDRC RTL version 2.0
  18. musb-hdrc: setup fifo_mode 4
  19. musb-hdrc: 28/31 max ep, 16384/16384 memory
  20. USB Host mode controller at 47401800 using PIO, IRQ 0
  21. Net: <ethaddr> not set. Validating first E-fuse MAC
  22. cpsw, usb_ether
  23. Hit any key to stop autoboot: 1  0
  24. gpio: pin 53 (gpio 53) value is 1
  25. mmc0 is current device
  26. micro SD card found
  27. mmc0 is current device
  28. gpio: pin 54 (gpio 54) value is 1
  29. SD/MMC found on device 0
  30. reading uEnv.txt
  31. 224 bytes read in 3 ms (72.3 KiB/s)
  32. Loaded environment from uEnv.txt
  33. Importing environment from mmc ...
  34. Running uenvcmd ...
  35. reading uImage.bin
  36. 4791501 bytes read in 575 ms (7.9 MiB/s)
  37. ## Booting kernel from Legacy Image at 80200000 ...
  38. Image Name: linux-3.8.13
  39. Image Type: ARM Linux Kernel Image (uncompressed)
  40. Data Size: 4791437 Bytes = 4.6 MiB
  41. Load Address: 80008000
  42. Entry Point: 80008000
  43. Verifying Checksum ... OK
  44. Loading Kernel Image ... OK
  45. OK
  46.  
  47. Starting kernel ...
  48.  
  49. Uncompressing Linux... done, booting the kernel.
  50. [ 75.526598] irq 23: nobody cared (try booting with the "irqpoll" option)
  51. [ 75.526676] [<c0010569>] (unwind_backtrace+0x1/0x8c) from [<c0063731>] (__report_bad_irq+0x11/0x80)
  52. [ 75.526714] [<c0063731>] (__report_bad_irq+0x11/0x80) from [<c0063a15>] (note_interrupt+0xf1/0x178)
  53. [ 75.526749] [<c0063a15>] (note_interrupt+0xf1/0x178) from [<c0062d39>] (irq_thread+0x75/0xec)
  54. [ 75.526790] [<c0062d39>] (irq_thread+0x75/0xec) from [<c003cd3b>] (kthread+0x61/0x72)
  55. [ 75.526830] [<c003cd3b>] (kthread+0x61/0x72) from [<c000c73d>] (ret_from_fork+0x11/0x34)
  56. [ 75.526845] handlers:
  57. [ 75.526867] [<c006269d>] irq_default_primary_handler threaded [<c0206dcb>] tps65217_irq
  58. [ 75.526908] Disabling IRQ #23
  59. [ 75.529577] DCDC1: at 1500 mV
  60. [ 75.531338] vdd_mpu: 925 <--> 1325 mV at 1100 mV
  61. [ 75.533024] vdd_core: 925 <--> 1150 mV at 1100 mV
  62. [ 75.534698] LDO1: at 1800 mV
  63. [ 75.536334] LDO2: at 3300 mV
  64. [ 75.539425] LDO3: 1800 mV
  65. [ 75.541143] LDO4: at 3300 mV
  66. [ 75.542650] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  67. [ 75.543500] omap_i2c 44e0b000.i2c: unable to select pin group
  68. [ 75.544262] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  69. [ 75.545342] pca953x 1-0020: failed reading register
  70. [ 75.545382] pca953x: probe of 1-0020 failed with error -121
  71. [ 75.549018] omap_i2c 4819c000.i2c: unable to select pin group
  72. [ 75.549253] media: Linux media interface: v0.10
  73. [ 75.549356] Linux video capture interface: v2.00
  74. [ 75.549494] pps_core: LinuxPPS API ver. 1 registered
  75. [ 75.549512] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  76. [ 75.550217] Advanced Linux Sound Architecture Driver Initialized.
  77. [ 75.551383] nfc: nfc_init: NFC Core ver 0.1
  78. [ 75.551496] NET: Registered protocol family 39
  79. [ 75.551678] Switching to clocksource gp_timer
  80. [ 75.569666] NET: Registered protocol family 2
  81. [ 75.570668] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  82. [ 75.570813] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  83. [ 75.570977] TCP: Hash tables configured (established 4096 bind 4096)
  84. [ 75.571066] TCP: reno registered
  85. [ 75.571094] UDP hash table entries: 256 (order: 1, 12288 bytes)
  86. [ 75.571140] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  87. [ 75.571611] NET: Registered protocol family 1
  88. [ 75.572192] RPC: Registered named UNIX socket transport module.
  89. [ 75.572214] RPC: Registered udp transport module.
  90. [ 75.572228] RPC: Registered tcp transport module.
  91. [ 75.572243] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [ 75.572865] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  93. [ 75.573446] CPU PMU: attempt to register multiple PMU devices!
  94. [ 75.573490] arm-pmu: probe of arm-pmu failed with error -28
  95. [ 75.573878] omap2_mbox_probe: platform not supported
  96. [ 75.577766] VFS: Disk quotas dquot_6.5.2
  97. [ 75.578003] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  98. [ 75.579242] NFS: Registering the id_resolver key type
  99. [ 75.579330] Key type id_resolver registered
  100. [ 75.579349] Key type id_legacy registered
  101. [ 75.579416] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  102. [ 75.579882] msgmni has been set to 993
  103. [ 75.582685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  104. [ 75.582710] io scheduler noop registered
  105. [ 75.582727] io scheduler deadline registered
  106. [ 75.582778] io scheduler cfq registered (default)
  107. [ 75.584513] tps65217-bl tps65217-bl: no platform data provided
  108. [ 75.584554] tps65217-bl: probe of tps65217-bl failed with error -22
  109. [ 75.585632] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  110. [ 75.588234] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  111. [ 75.588517] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  112. [ 75.951262] console [ttyO0] enabled
  113. [ 75.956279] [drm] Initialized drm 1.1.0 20060810
  114. [ 75.974620] brd: module loaded
  115. [ 75.984729] loop: module loaded
  116. [ 75.988197] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  117. [ 75.995500] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  118. [ 76.002798] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  119. [ 76.010083] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  120. [ 76.017368] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  121. [ 76.031921] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,00A6,4213BBBK0413'
  122. [ 76.039820] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
  123. [ 76.075233] bone-capemgr bone_capemgr.9: slot #0: No cape found
  124. [ 76.112341] bone-capemgr bone_capemgr.9: slot #1: No cape found
  125. [ 76.149451] bone-capemgr bone_capemgr.9: slot #2: No cape found
  126. [ 76.186559] bone-capemgr bone_capemgr.9: slot #3: No cape found
  127. [ 76.192843] bone-capemgr bone_capemgr.9: slot #4: specific override
  128. [ 76.199473] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
  129. [ 76.207544] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  130. [ 76.217731] bone-capemgr bone_capemgr.9: slot #5: specific override
  131. [ 76.224353] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
  132. [ 76.232420] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  133. [ 76.242578] bone-capemgr bone_capemgr.9: slot #6: specific override
  134. [ 76.249189] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
  135. [ 76.257235] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
  136. [ 76.267983] bone-capemgr bone_capemgr.9: initialized OK.
  137. [ 76.273638] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
  138. [ 76.287248] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
  139. [ 76.302241] usbcore: registered new interface driver pn533
  140. [ 76.309480] OneNAND driver initializing
  141. [ 76.313598] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
  142. [ 76.324323] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
  143. [ 76.337263] edma-dma-engine edma-dma-engine.0: allocated channel for 0:45
  144. [ 76.345077] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
  145. [ 76.352189] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
  146. [ 76.358438] edma-dma-engine edma-dma-engine.0: allocated channel for 0:44
  147. [ 76.367642] usbcore: registered new interface driver asix
  148. [ 76.374281] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
  149. [ 76.383484] platform 4830e000.fb: alias fck already exists
  150. [ 76.389442] usbcore: registered new interface driver cdc_ether
  151. [ 76.395827] usbcore: registered new interface driver smsc95xx
  152. [ 76.403668] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
  153. [ 76.410631] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
  154. [ 76.425082] usbcore: registered new interface driver net1080
  155. [ 76.431247] usbcore: registered new interface driver cdc_subset
  156. [ 76.437555] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
  157. [ 76.449114] usbcore: registered new interface driver zaurus
  158. [ 76.455162] usbcore: registered new interface driver cdc_ncm
  159. [ 76.461477] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
  160. [ 76.471096] bone-capemgr bone_capemgr.9: slot #6: Failed verification
  161. [ 76.477878] bone-capemgr bone_capemgr.9: loader: retrying slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  162. [ 76.487919] usbcore: registered new interface driver cdc_acm
  163. [ 76.493897] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  164. [ 76.502291] Initializing USB Mass Storage driver...
  165. [ 76.507450] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  166. [ 76.517327] usbcore: registered new interface driver usb-storage
  167. [ 76.523665] USB Mass Storage support registered.
  168. [ 76.528770] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  169. [ 76.535502] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  170. [ 76.540774] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  171. [ 76.549958] musb-hdrc musb-hdrc.0.auto: *** mode=3
  172. [ 76.555018] musb-hdrc musb-hdrc.0.auto: *** power=250
  173. [ 76.561007] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  174. [ 76.566264] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  175. [ 76.575256] musb-hdrc musb-hdrc.1.auto: *** mode=1
  176. [ 76.580303] musb-hdrc musb-hdrc.1.auto: *** power=250
  177. [ 76.585619] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  178. [ 76.591989] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  179. [ 76.600445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  180. [ 76.607588] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  181. [ 76.615174] usb usb1: Product: MUSB HDRC host driver
  182. [ 76.620403] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
  183. [ 76.626079] usb usb1: SerialNumber: musb-hdrc.1.auto
  184. [ 76.632362] hub 1-0:1.0: USB hub found
  185. [ 76.636399] hub 1-0:1.0: 1 port detected
  186. [ 76.641915] mousedev: PS/2 mouse device common for all mice
  187. [ 76.650456] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  188. [ 76.658146] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
  189. [ 76.664750] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
  190. [ 76.671371] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc1
  191. [ 76.678806] i2c /dev entries driver
  192. [ 76.683540] pps_ldisc: PPS line discipline registered
  193. [ 76.689033] Driver for 1-wire Dallas network protocol.
  194. [ 76.696336] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  195. [ 76.703939] cpuidle: using governor ladder
  196. [ 76.708271] cpuidle: using governor menu
  197. [ 76.712877] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
  198. [ 76.720108] omap_hsmmc mmc.5: Failed to get rstctl; not using any
  199. [ 76.726919] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  200. [ 76.734145] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  201. [ 76.741690] mmc.5 supply vmmc_aux not found, using dummy regulator
  202. [ 76.748743] omap_hsmmc mmc.5: pins are not configured from the driver
  203. [ 76.782619] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
  204. [ 76.788834] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
  205. [ 76.796870] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
  206. [ 76.803394] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  207. [ 76.810563] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  208. [ 76.818254] mmc.11 supply vmmc_aux not found, using dummy regulator
  209. [ 76.825015] omap_hsmmc mmc.11: pins are not configured from the driver
  210. [ 76.858955] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  211. [ 76.870670] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
  212. [ 76.877982] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  213. [ 76.886968] leds-gpio gpio-leds.8: pins are not configured from the driver
  214. [ 76.895605] ledtrig-cpu: registered to indicate activity on CPUs
  215. [ 76.902446] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  216. [ 76.909698] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  217. [ 76.917868] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  218. [ 76.924215] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  219. [ 76.931468] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  220. [ 76.944523] usbcore: registered new interface driver usbhid
  221. [ 76.950579] usbhid: USB HID core driver
  222. [ 76.957950] mmc0: host does not support reading read-only switch. assuming write-enable.
  223. [ 76.974456] pinctrl-single 44e10800.pinmux: pin 44e1099c already requested by 481a0000.spi; cannot claim for 48038000.mcasp
  224. [ 76.986161] pinctrl-single 44e10800.pinmux: pin-103 (48038000.mcasp) status -22
  225. [ 76.993842] pinctrl-single 44e10800.pinmux: could not request pin 103 on device pinctrl-single
  226. [ 77.003314] davinci-mcasp 48038000.mcasp: pins are not configured from the driver
  227. [ 77.011385] mmc0: new high speed SDHC card at address e624
  228. [ 77.019672] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
  229. [ 77.027376] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  230. [ 77.034015] mmcblk0: p1 p2
  231. [ 77.039900] TCP: cubic registered
  232. [ 77.043433] Initializing XFRM netlink socket
  233. [ 77.049221] NET: Registered protocol family 17
  234. [ 77.054225] NET: Registered protocol family 15
  235. [ 77.059169] Key type dns_resolver registered
  236. [ 77.063827] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  237. [ 77.071985] ThumbEE CPU extension supported.
  238. [ 77.076540] Registering SWP/SWPB emulation handler
  239. [ 77.082539] registered taskstats version 1
  240. [ 77.088535] pinctrl-single 44e10800.pinmux: pin 44e109b0 already requested by mmc.11; cannot claim for hdmi.13
  241. [ 77.099153] pinctrl-single 44e10800.pinmux: pin-108 (hdmi.13) status -22
  242. [ 77.106199] pinctrl-single 44e10800.pinmux: could not request pin 108 on device pinctrl-single
  243. [ 77.115240] slave hdmi.13: Failed to select default state
  244. [ 77.121012] slave: probe of hdmi.13 failed with error -22
  245. [ 77.128516] tilcdc 4830e000.fb: No power control GPIO
  246. [ 77.135201] dummy 0-0034: Error -121 writing to cec:0xff
  247. [ 77.141051] tda998x 0-0070: Error -121 reading from 0xa
  248. [ 77.146810] tda998x 0-0070: Error -121 writing to 0xa
  249. [ 77.192172] mmc1: BKOPS_EN bit is not set
  250. [ 77.199609] mmc1: new high speed MMC card at address 0001
  251. [ 77.205464] tda998x 0-0070: Error -121 reading from 0xa
  252. [ 77.211770] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
  253. [ 77.216754] tda998x 0-0070: Error -121 writing to 0xa
  254. [ 77.222409] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
  255. [ 77.228985] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
  256. [ 77.237463] mmcblk1: unknown partition table
  257. [ 77.244271] mmcblk1boot1: unknown partition table
  258. [ 77.251416] mmcblk1boot0: unknown partition table
  259. [ 77.274627] tda998x 0-0070: Error -121 reading from 0x1
  260. [ 77.280313] tda998x 0-0070: Error -121 writing to 0x1
  261. [ 77.285772] tda998x 0-0070: Error -121 reading from 0x1
  262. [ 77.291413] tda998x 0-0070: Error -121 writing to 0x1
  263. [ 77.296888] tda998x 0-0070: Error -121 writing to REG_CURPAGE
  264. [ 77.303078] tda998x 0-0070: Error -121 writing to 0x200
  265. [ 77.308720] tda998x 0-0070: Error -121 writing to 0x201
  266. [ 77.314360] tda998x 0-0070: Error -121 writing to 0x202
  267. [ 77.320017] tda998x 0-0070: Error -121 writing to 0x203
  268. [ 77.325659] tda998x 0-0070: Error -121 writing to 0x204
  269. [ 77.331300] tda998x 0-0070: Error -121 writing to 0x205
  270. [ 77.336983] tda998x 0-0070: Error -121 writing to 0x20e
  271. [ 77.342623] tda998x 0-0070: Error -121 writing to 0x211
  272. [ 77.348263] tda998x 0-0070: Error -121 writing to 0x207
  273. [ 77.353903] tda998x 0-0070: Error -121 writing to 0x208
  274. [ 77.359686] tda998x 0-0070: Error -121 writing to 0x209
  275. [ 77.365332] tda998x 0-0070: Error -121 writing to 0x20a
  276. [ 77.370974] tda998x 0-0070: Error -121 writing to 0x206
  277. [ 77.376614] tda998x 0-0070: Error -121 writing to REG_CURPAGE
  278. [ 77.382798] tda998x 0-0070: Error -121 reading from 0x0
  279. [ 77.388439] tda998x 0-0070: Error -121 reading from 0x2
  280. [ 77.394280] tilcdc 4830e000.fb: no encoders/connectors found
  281. [ 77.400244] tilcdc 4830e000.fb: failed to initialize mode setting
  282. [ 77.458162] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  283. [ 77.464594] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  284. [ 77.472146] libphy: 4a101000.mdio: probed
  285. [ 77.476418] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  286. [ 77.486284] Detected MACID = 00:18:31:e1:c4:ee
  287. [ 77.490947] cpsw 4a100000.ethernet: NAPI disabled
  288. [ 77.497630] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  289. [ 77.515431] ALSA device list:
  290. [ 77.518581] #0: TI BeagleBone Black
  291. [ 77.525273] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
  292. [ 77.532399] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
  293. [ 77.639304] kjournald starting. Commit interval 5 seconds
  294. [ 77.651562] EXT3-fs (mmcblk0p2): recovery complete
  295. [ 77.656597] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  296. [ 77.663889] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
  297. [ 77.672619] devtmpfs: mounted
  298. [ 77.676038] Freeing init memory: 268K
  299. INIT: version 2.88 booting
  300. Starting udev
  301. [ 78.020132] udevd[113]: starting version 182
  302. Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
  303. bootlogd.
  304. [ 78.259242] EXT3-fs (mmcblk0p2): using internal journal
  305. Configuring network interfaces... [ 79.018929] net eth0: initializing cpsw version 1.12 (0)
  306. [ 79.033078] net eth0: phy found : id is : 0x7c0f1
  307. [ 79.044286] libphy: PHY 4a101000.mdio:01 not found
  308. [ 79.049352] net eth0: phy 4a101000.mdio:01 not found on slave 1
  309. udhcpc (v1.21.1) started
  310. Sending discover...
  311. Sending discover...
  312. Sending discover...
  313.  
  314. No lease, failing
  315. Sat Jan 18 06:58:00 UTC 2014
  316. INIT: Entering runlevel: 5
  317. Starting syslogd/klogd: done
  318. Stopping Bootlog daemon: bootlogd.
  319.  
  320. Poky (Yocto Project Reference Distro) 1.5 beaglebone /dev/ttyO0
  321.  
  322. beaglebone login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!