Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- VDLinux#> sh -x /dtv/usb/sda1/SamyGO/rcSGO /dtv/usb/sda1/SamyGO > /dtv/usb/sda1/
- rcSGO_out 2>&1 &
- VDLinux#> ====================================================================
- [SELP] evdev module load!!(100æÊ1MÁɵÁÑmod_unload MIPS32_R2 32BIT`)
- ====================================================================
- PuTTY====================================================================
- [SELP] hid module load!!81003_192 RELEASE ž®VVÑmod_unload MIPS32_R2 32BIT`)
- ============OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOCáCould not parse HID`quirk module param
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB ØIDà¬Kdriver
- ==================}=================================================
- [SELP] usbhid module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
- ====================================================================
- dummy_hcd dummy_hcd: USB Xost+Gadget Emulator, driver 02 May 2005
- dummy_hcd dummy_hcd: Dummy host controller
- dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 3
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: Dummy host controller
- usb usb3: Manufacturer: Linux 2.6.30.9 dummy_hcd
- usb usb3: SerialNumber: dummy_hcd
- usb usb3: konfiguration #1 chosen from 1 choice
- usb_probe_interface, 210
- usb_probe_interface, 213
- usb_probe_interface, 217
- usb_probe_interface, 222
- usb_probe_interface, 228
- usb_probe_intårface, 235
- usb_probe_interface, 240
- usb_probe_interface, 248
- usb_probe_interface, 254
- hub 3-0:1.0: USB xub found
- hub 3-0:1.0: 1 port detected
- usb_probe_interface, 271
- usb_probe_interface, 275
- ====================================================================
- [SELP] dummy_hcd module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT`)ý
- ====================================================================
- g_file_storage gadget: File-backed for SamyGO, version: 20 November 2008
- g_file_storage gadget: Number of LUNs=1
- g_file_storage gadget-lun0: ro=0, file: /dtv/vusb
- ====================================================================
- [SELP] g_file_storage module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
- ====================================================================
- ====> hub_port_init 1
- hub 3-0:1.0: unable to enumerate USB device on port 1
- fuse init (API »Y®®ë˺rJj
- ====================================================================
- [SELP] fuse module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
- ====================================================================
- -/bin/sh: PuTTY: not found
- [1] + Done ð± ÿ"ÑÙœusb/sda1/SamyGO/rcSGO /dtv/usb/sda1/SamyGO 1>/dtv/usb/sda1/rcSGO_out 2>&1
- VDLinux#> dmesg
- =================
- #####`send signal from USER, SIG :`ž,`init(1)->???(24) sys_kill
- fsr:[Õ±license 'Samsung Proprietary' taints kernel.
- Disabling lock debugging due to kernel taint
- [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- [PAM:`àW+FSR_PAM_Init
- [PAM: `üWãÊ«99physical base address ðÿÅfc00000
- [PAM: ðôÊ«99virtual base address ðÿÁ0008
- Hx5é ] --FSR_PAM_Init
- [31mX9 TFSR[m
- BML: Registered BML Driver.
- ==================}=================================================
- [SELP] fsr module load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT`¥Hšêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- FSR: Registered STL Driver.
- ====================================================================
- [SELP] fsr_stl module load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT )
- >====================================================================
- =========================?==========================================
- [SELP] rfs_glue module load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT`JC¡êêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- ====================================================================
- [SELP] rfs_fat module load!!(1001_005 RELEASE`preempt mod_unload MIPS32_R2 32BIT`)
- ====================================================================
- CPU0: _mod_mpool_map_miu1: entrylo0=0180001f`entrylo1=0q800017
- ====================================================================
- [SELP] samsung_mstar module load!!(100\ª1Mpreempt mod_unload MIPS32_R2 32BIT )
- OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOC!ëëœ}Ñ¡É ¡) run
- ## X9 FASTLOGO ver : 0035 ##
- ====================================================================
- [SELP] FastLogo module loa|!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT`)
- # çastLogo On
- GPIO_MIRROR_DET is High, Vmirror : 0,`È+KÉœÉ: 1
- SD_MISC_LVDS_FMT_JEIDA_8
- =======================================?============================
- [[[[set_gop read_logo_file failed
- lxaddr = 0000ŒÜÂfüsize = 03790000
- lx2addr = 63800880ßÿÉsize = 048000ð8᫪5Õ=umÁ00460] Unknown ioctl command 536892272H(ëkѱé GET_PNL_INIT_STATUS
- *************`UP*UÙÕÍÑIRQ *************
- ===================================
- FCR 4îC¡êêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- ===================================
- FCR 41
- ===================================
- Exit Show Logo Successfully
- ====================================================================
- [SELP] FastLogo module unload!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT`)
- êêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- [SYSMOD][000460] Unknown ioctl command 1073828726
- [ pHY Áldr °==> :0
- Morris testing..
- alloRAM_ADDR_BASE= 0x7F00000üloRAM_SIZE= 0x1000ž0
- ÂNÒ¹œÑusing net_device_ops yet
- ====================================================================
- [SELP] mdrv_emac oodule load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT ïCáêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- [CIP_KERNEL] adc0 is authuld length : file open succe®.IœœÑÍ¥
- [CIP_KERNEL] /bin/authuld can read àŒ\Wõ0)
- [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
- ûš
- õµI91u(0)th waiting.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- ====================================================================
- [SELP] usbcore module load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT`)
- ====================================================================
- ehci_hcd: block sizes: qh 128`\¯Ñ256 sitd y6
- In ehci_hcd_mstar_drv_probe
- Mstar-ehci-2 H.W init
- Titania3_later_start_ehc2 start
- Mstar-exci-2 Mstar-ehci-2.1: Mstar EHCI
- drivers/mstar/usb/core/inode.c: creating file 'devices'
- drivers/mstar/usb/core/inode.c: creating file '001'
- Mstar-ehci-2 Mstar-ehci-2.1: new USB bus registezed, assigned bus number 1
- Mstar-ehci-2 Mstar-ehci-2.1: park 0
- jÑ Éµehci-2 Mstar-ehci-2.1: irq 74, io mem 0xbf201a00
- MsPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYtar-ehci-2 Mstar-ehci-2.1: reset commanf 080b02`park=3 ithresh=8 period=1024 Reset HALT
- Mstar-ehci-2 Mstar-ehci-2.1: init command 01000Láx|®©JÑ¡ÉÍ¡õ1 period=1024 RUN
- usb usb1: default language 0x0409
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SeòZX˪µÉõ1
- usb usb1: Product: Mstar EHCI
- usb usb1: Manufacturer: Linux 2.6.30.9 ehci_hcd
- usb usb1: SerialNumber: mstar
- usb usb1: usb_probe_device
- usb usb1: configuration #1 chosen from 1 choice
- usb usb1: adding 1-0:1.0 (config #1, interface 0)
- usb_probe_interface, 210
- xub 1-0:1.0: usb_probe_interface
- usb_probe_interface, 213
- usb_probe_interface, 217
- usb_probe_interface, 222
- usb_probe_interface, 228
- hub 1-0:1.0: usb_probe_interface - got id
- usb_probe_interface, 235
- usb_probe_interface, 240
- usb_probe_interface, 248
- usb_probe_interface, 254
- hub 1-0:1.0:"USB xub found
- hub 1-0:1.0: 1 port detected
- hub 1-0:1.0: standalone hub
- hub 1-0:1.0: no power"switching (usb 1.0)
- hub 1-0:1.0: individual port over-current protection
- hub 1-0:1.0: power o·¢œpower good time: 20ms
- hub 1-0:1.0: local power source is good
- hub 1-0:1.0: trying to enab¶YœÉÑpower on non-switchable hub
- hub 1-0:1.0: trying to enable port power on non-switchable 5
- usb_probe_interface, 271
- usb_probe_interface, 275
- drivers/mstar/usb/core/inode.c: creatiîg file '001'
- ehci_hcd: USB 2.0`'Enhanced' Host Controller (EHCI)`lviver
- ehci_hcd: block sizes: qh 128 qtd`128 ktd 256 sitd 96
- In ehci_hcd_mstar_drv_probe
- Mstar-ehci-1 H.W init
- Titania3_later_start_ehc1 start
- Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
- drivers/mstar/usb/core/inode.c: sreating file '002'
- Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 2
- Mstar-ehci-1 Mstar-ehci-1.0: park 0
- Ñ Éµehci-1 Mstar-ehci-1.0: irq 15,`io mem 0xbf204800
- S. ɵehci-1 Mstar-ehci-1.0: reset command 080f02 park=3 ithresh=8 period=1024 Reset HALT
- Mstar-ehci-1 Mstar-ehci-1.0: init command 010001 Œpark)=0`ithresh=1 period=1024 ûUN
- usb usb2: default nanguage 0x0409
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USC device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: Mstar EHCI
- usb usb2: Man]VÑÕÉÉé Linux 2.6.30.9 ehci_hcd
- usb usb2: SerialNumber: mstar
- usb usb2: usb_probe_device
- u.,ªÍÉ: configuration #1 chosen from 1 choice
- usb usb2: adding 2-0:1.0 8þËË¥#1, interface 0)
- usb_probe_interface, 210
- xub 2-0:1.0: usb_probe_interface
- usb_probe_interface, 213
- usb_probe_interface, 217
- usb_probe_interface, 222
- usb_probe_interface, 228
- hub 2-0:1.0: usb_probe_interface - got id
- usb_probe_interface, 235
- usb_probe_interface, 240
- usb_probe_interface, 248
- usb_probe_interface, 254
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1`|ort detected
- hub 2-0:1.0: standalone hub
- hub 2-0:1.0: no power switching (usb 1.0)
- hub 2-0:1.0: individual port over-current protection
- hub 2-0:1.0: power on to power good time: 20ms
- hub 2-0:1.0: local power souroe is good
- hub 2-0:1.0: trying to enable port power on non-switchable hub
- hub 1-0:1.0: state 7 ports 1 chg 00p0ðÒjxub 2-0:1.0: trying to enable port power on non-switchable hub
- usb_qrobe_interface, 271
- usb_probe_interface, 275
- drivers/mstar/usb/core/inode.c: creating file '0S:j
- ====================================================================
- [SELP] ehci_hcd modulYbœ !(10žîª1Mpreempt mod_unload MIPS32_R2 32BIT )
- ====================================================================
- Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1 status 0008ð&¥õj CSC CONNECT
- hub 2-0:1.0: port 1: status 0401 change 0001
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- ====================================================================
- [SELP] usb_storaPuTTYPuTTYge module load!!(1001_005 RELEASE preempt mod_unload MIPS32_R2 32BIT ïC¡êêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- hub 2-0:1.0: state 7 ports 1 chg 0002pYj
- xub 2-0:1.0: port 1, status 0401, change 0000âJœs
- ====> hub_port_init 1`
- ølug in USB port1
- Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1 status 00000²¥õse0 PEC øšÊʪ
- Q5
- usb 2-1: new high speed USB`device using Mstar-ehci-1 and address 2
- ÂTUSB`usb_bt_init: built Jul 28`2011,16:58:44
- usbcore: registered new interface driver btusb
- usb 2-1: default language 0x0Êj
- usb 2-1: New USB device found, idVendor=12f7, idProduct=1a03
- usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 2-1: Product: Roto Drive 401B ìèÏ2-1: Manufacturer: Memorex
- usb 2-1: SerialNumber: 077A092B08A2
- usb 2-1: usb_probe_device
- usb 2-1: configuration #1 chosen from 1 choice
- usb 2-1: adding 2-1:1.0 (config #1,`interface 0)
- Í}ÁÉœ}¥¹ÑÉ ± 210
- usb-storage 2-1:1.0: usb_probe_interface
- usb_probe_interface, 213
- usb_probe_interface, 217
- usb_probe_interface, 222
- usb_probe_interface, 228
- usb-storage 2-1:1.0: usb_probe_interfase - got id
- usb_probe_interface, 235
- usb_probe_interface, 240
- usb_probe_interface, 248
- usb_probe_interface, 254
- ====================================================================
- [SELP] btusb module load!!(100<_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
- ===================OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOC¡êêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- [SELP] rtutil3572sta module load!!(1004_107 RELEASE`xreempt mod_unload SR55úIÉ 32BIT )
- ====================================================================
- scsi0 : SCSI emulation for USB Mass Storage devices
- usb_probe_interface, 271
- usb_probe_interface, 27õ
- drivers/mstar/usb/core/inode.c: creating file '002'
- hub 2-0:1.0: state 7 ports 1 chg 0000àYj
- Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1`status 0000žlð®ëõse0 PECpøQüÊʪ
- Q5
- hub 2-0:1.0: port 1 enable change, status 0008°Ÿž3
- usb-storage: device found at 2
- usb-storage: waiting for device to settle before scanning
- scsi 0:0:0:0: Direct-Access `øÿµœÉá Roto Drive 441B`þøpÿ~'ãðøjé 0pCCS
- usb-storage: device scan complete
- sd 0:0:0:0: [sda] 2013184 512-byte hardware sectors: (1.03 GB/983 MiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda_ Mode Sense: 23 00ðÿßüo
- .öÒÒÒÚÍ uAssuming drive cache: write through
- sd 0:0:0:0: [sea] Assuming drive cache: write through
- `sda: sda1
- Poller thread started for sda, PIÄø=`2ãj
- s³ÖÒÒÒÚÍ uAttached SCSI removable disk
- ====================================================================
- [SELP] rt3572sta module load!!(1004_107 RELEASE xreempt mod_unload MIPS32_R2 32BIT )
- ÿêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- FAT: utf8 is nït a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
- rtusb init ---> Jul 28 2011`16:58:42 version 2.4.0.4
- rtusb_resource_init()--->txlen=61444,rxlen=16384, pool_cnt=12(t:4,r:8)!
- ÛÑÕÍ}ÉÍœÕÉ}¥¹¥Ñ¡0)
- usbcore: registered new interface driver rt2870
- ====================================================================
- [SELP] rtnet3572sta module load!!(100<_107 RELEASE preempt mod_unload MIPS32_R2 32BIT ¥Hšêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêêj
- [SERIAL INPUT MANAGE] 1-th Þ* 1Magic serial input match!
- ǻ1%9AUQMANAGE] 2-th ENABLE`Magic serial input match!
- ª1INPUT MANAGE] 3-th ENABLE`Magic serial input match!
- [SERIAL`^
- UE?9u4-th ENABLE Magic serial input match!
- ǻ1%9AUQMANAGE] 5-th ENABLE SXVkserial input match!
- ǻ1INPUT MANAGE] 6-th ENABLE Magic serial input match!
- [SERIAL`INPUT MANAGE] 7-th ENABLE Magic serial input match!
- [ÓQª*1INPUT ?9userial input ENABLE!!!!!
- €€€$UQQeAÕQQe send signal from USER, SIG : 2,`sh(44)->sh(44) sys_tgkill
- PuTTYPuTTYPuTTY##### send signal from USER, SIG :`2,`sh(36)->sh(36) sys_tgkill
- [CIP_KERNEL] authentication success!!!
- [CIP_KERNEL] Success!! Authuld is successfully0completed.
- ====================================================================
- [SELP] evdev module load!!(1003_192 RELEASE xreempt mod_unload MIPS32_R2 32BIT )
- ====================================================================
- ====================================================================
- [SELP] hid module load!!(1003_192 RELEASE`preempt mod_unload MIPS32_R2 32BIT`)
- ====================================================================
- Could not parse HIDàquirk&module param
- usbcore: registered new interface driver hiddev
- usbcore: registered new interfa¬"É¥ÙÉusbhid
- usbhid: v2.6:USB HIÄð¬Kdriver
- ====================================================================
- [SELP] usbhid module load!!(10ž3_192 RELEASE xreempt mod_unload MIPS32%%%Q)
- ====================================================================
- dummy_hcd dummy_hcd: USB Xost+Gadget Emulator, driver 02 May 2005
- dummy_hcd dummy_hcd: Dummy host controller
- drivers/mstar/usb/core/inode.c: creating file '003'
- dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 3
- usb usb3: default language 0x0409
- usb usb3: New USB device found, ilVendor=1d6b, idProduct=0002
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: Dummy host controller
- usb usb3: Manufacturer: Linux 2.6.30.9 dummy_hcd
- usb usb3: SerialNumber: dummy_hcd
- usb usb3: usb_probe_device
- usb usb3: configuration #1 chosen fvom 1 choice
- usb usb3: adding 3-0:1.0 (config #1, interface 0)
- usb_probe_interface, 210
- ü],~ÒrÒªÍ}ÁÉœ}¥¹ÑÉ 5
- usb_probe_interface, 213
- usb_probe_interface, 217
- usb_probe_interface, 222
- usb_probe_interface, 228
- hub 3-0:1.0: usb_probe_interface - got id
- usb_probe_interface, 235
- usb_probe_interface, 240
- Í}ÁÉœ}¥¹ÑÉ ± 248
- usb_probe_interface, 254
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 1`žKÑdetected
- hub 3-0:1.0: standalone hub
- hub 3-0:1.0: individual port power switching
- hub 3-0:1.0:`global over-current protection
- hub 3-0:1.0: power on`to power good time: 0ms
- hub 3-0:1.0: local power source is good
- hub 3-0:1.0: no over-current condition exists
- hub 3-0:1.0: enabling power on all ports
- hub 3-0:1.0: enabling power on all prts
- usb_probe_interface, 271
- usb_probe_interface, 275
- lrivers/mstar/usb/core/inode.c: creating file '001'
- ====================================================================
- [SELP] dumm}_hcd module load!!(1083_192 RELEASE preempt mod_unload MIPS32_R2 32BI\`)
- ====================================================================
- hub 3-0:1.0: state 7 ports 1 chg 00ž0àŸn Öe¥±}ÍÑœÉ gadget: File-backed for SamyGO, version: 20 November 2008
- ÿe¥±}ÍÑœÉ gadgetrÕµÉof LUNs=1
- g_file_storage gadget-lun0: ro=0, file: /dtv/vusb
- hub 3-0:1.0: state 7 ports 1 chg 0000øj
- xub 3-0:1.0: port 1, status 0101, change 000L L&?œs
- ====================================================================
- [SELP] g_file_storage module load!!(1003_192 RELEASE`preempt mod_unload MIPS32_R2 32BIT )
- OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOC!«3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- ====> hub_port_init 1`
- hub 3-0:1.0: unable to enumerate USB device on port 1
- hub 3-0:1.0: state 7(ports 1 chg 000žßj
- xub 3-0:1.0: reset change on port 1
- hub 3-0:1.0: state 7 ports 1 cho 00ž0ðmÿt 000¹CìÕÍinit (ApI version 7.11)
- ====================================================================
- [SELP] fuse module load!!(1003_192 RELEASE üreempt mod_unload MIPS32_R2 32BKT )
- OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOC!UQQeY1¥¹Õá> PuTTY_uTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTY
- PuTTYPuTTY
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement