[root@alarm x11]# X -verbose

X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.75-1-ARCH armv7l
Current Operating System: Linux alarm 3.0.36+ #60 PREEMPT Tue Jan 8 18:35:54 CST 2013 armv7l
Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00350000 root=/dev/mtdblock5 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00200000@0x00020000(swap),-@0x00220000(linux) bootver=2012-12-14#1.22 firmware_ver=4.0.4
Build Date: 13 January 2014  04:54:47PM

Current version of pixman: 0.32.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  1 14:13:19 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Mali-Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Mali-Fbdev"
(==) No monitor specified for screen "Mali-Screen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.15.0, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/mali_drv.so
(II) Module mali: vendor="X.Org Foundation"
	compiled for 1.15.0, module version = 0.4.2
MaliSetup
MaliIdentify
(II) MALI: driver for Mali Framebuffer: mali
(--) using VT number 2

(WW) Falling back to old probe method for mali
MaliProbe
MaliHWProbe
(II) MALI(0): using /dev/fb0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) MALI(0): MaliPreInit: ENTER
(II) MALI(0): MaliGetRec: ENTER
(II) MALI(0): MaliHWInit: ENTER
(II) MALI(0): MaliHWGetDepth: ENTER
(II) MALI(0): Creating default Display subsection in Screen section
	"Mali-Screen" for depth/fbbpp 24/32
(**) MALI(0): Depth 24, (--) framebuffer bpp 32
(==) MALI(0): RGB weight 888
(==) MALI(0): Default visual is TrueColor
(==) MALI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MALI(0): MaliHWGetVidmem: ENTER
(II) MALI(0): MaliHWGetName: ENTER
(II) MALI(0): hardware: fb0 (video memory: 12288kB)
(**) MALI(0): DRI disabled. No support in config file
(**) MALI(0): DRI Fullscreen page flip enabled
(**) MALI(0): DRI Fullscreen page flip VSYNC'd
(**) MALI(0): Use cached UMP memory
(**) MALI(0): Use umplock across processes
(**) MALI(0): DRI disabled. No support in config file
(**) MALI(0): DRI Fullscreen page flip enabled
(**) MALI(0): DRI Fullscreen page flip VSYNC'd
(**) MALI(0): Use cached UMP memory
(**) MALI(0): Use umplock across processes
(II) MALI(0): MaliHWGetFD: ENTER
(II) MALI(0): FBDev_crtc_config: ENTER
(II) MALI(0): FBDev_crtc_config: EXIT
(II) MALI(0): Output LCD has no monitor section
(II) MALI(0): Mode 1024 x 600 valid
(II) MALI(0): Printing probed modes for output LCD
(II) MALI(0): Modeline "1024x600"x60.0   45.04  1024 1044 1064 1104  600 620 640 680 (40.8 kHz e)
(II) MALI(0): Output LCD connected
(II) MALI(0): Using sloppy heuristic for initial modes
(II) MALI(0): Output LCD using initial mode 1024x600
(II) MALI(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) MALI(0): MaliHWSetVideoModes: ENTER
(--) MALI(0): Virtual size is 1024x600 (pitch 1024)
(**) MALI(0):  Driver mode "1024x600": 45.0 MHz (scaled from 0.0 MHz), 40.8 kHz, 60.0 Hz
(II) MALI(0): Modeline "1024x600"x60.0   45.04  1024 1044 1064 1104  600 620 640 680 (40.8 kHz e)
(==) MALI(0): DPI set to (96, 96)
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.15.0, module version = 1.0.0
(==) Depth 24 pixmap format is 32 bpp
(II) MALI(0): MaliScreenInit: ENTER
(II) MALI(0): MaliHWMapVidmem: ENTER
(II) MALI(0): MaliHWLinearOffset: ENTER
(II) MALI(0): MaliHWSave: ENTER
(II) MALI(0): MaliHWModeInit: ENTER
(II) MALI(0): MaliHWSetMode: ENTER
(II) MALI(0): MaliHWSaveScreen: ENTER
(II) MALI(0): MaliHWAdjustFrame: ENTER
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.15.0, module version = 2.6.0
(II) MALI(0): maliSetupExa: ENTER
(II) MALI(0): Mali EXA driver is loaded successfully
(II) MALI(0): maliSetupExa: EXIT
(WW) MALI(0): Initializing EXA Driver!
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) MALI(0): Backing store enabled
(==) MALI(0): Silken mouse enabled
(II) MALI(0): Changing mode to 1024 600 1024 1200
(II) MALI(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) MALI(0): DPMS enabled
(WW) MALI(0): Failed to open umplock device!
(--) RandR disabled
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
GET_UMP_SECURE_ID_BUF1 returned 0xffffffff offset: 0 virt address: 0x408e2000 fb_virt: 0x408e2000
(EE) MALI(0): [maliModifyPixmapHeader:191] UMP failed to retrieve secure id
(II) MALI(0): Setting screen physical size to 270 x 158
(II) MALI(0): fbdev_crtc_config_resize: width = 1024 height = 600
(EE)
(EE) Backtrace:
(EE)
(EE) Segmentation fault at address 0x20
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
	 at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(II) MALI(0): MaliHWLeaveVT: ENTER
(II) MALI(0): MaliHWRestore: ENTER
(EE) Server terminated with error (1). Closing log file.
Aborted
[root@al