e3200 boot

reboot
# Sending SIGTERM to all processes
UPnP::upnp_device_detach:br0: detach InternetGatewayDevice.xml
UPnP::upnp_shutdown:UPnP daemon stopped
UPnP::upnp_mainloop:UPnP shutdown!
Sending SIGKILL Restarting system.


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar  4 11:57:55 HKT 2011 (zha4(0x40000)
Found a 16MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.28 @VERSION_TYPE@
CPU type 19749: 500MHz
Tot mem: 65536 KBytes

CFE mem:    0x80700000 - 0x807A02F0 (656112)
Data:       0x80735600 - 0x80739640 (16448)
BSS:        0x80739640 - 0x8073A2F0 (3248)
Heap:       0x8073A2F0 - 0x8079E2F0 (409600)
Stack:      0x8079E2F0 - 0x807A02F0 (8192)
Text:       0x80700000 - 0x807355F4 (218612)

Boot version: v5.9
The boot is CFE

Flash base: bfc00000, mac start: 3ef00
mac_init(): Find mac [58:6D:8F:07:8D:6C] in location 0
Nothing...
No country code find

### CLKDIV= 0x20e0842, SFlashClkDiv=2 clkdivsf=2 ###

### Change it to 0x20e0842 (2) ###
Device eth0:  hwaddr 58-6D-8F-07-8D-6C, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
cfe_led_init: start to set power LED and switch LEDs.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flashons:(null)
Loading: .. 3653724 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (zhaoguang@sw1) (gcc version 4.2.3) #3 Fri Mar 11 09:02:10 HKT 2011
CPU rery: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal          0 ->    16384
  HighMem     16384 ->    16384
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Built 1 zonelists.  Total pages: 16384
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5357 rev 1 at 500 MHz
Using 250.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60292k/65536k available (2805k kernel code, 5180k reserved, 554k data, 208k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
PCI: no core
PCI: Fixing up bus 0
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entristablished 2048 bind 2048)
TCP reno registered
gpio_init: power pulse time 7
Register DIAG LED in /proc/sys/diag_blink.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 1766
Creating 4 MTD partitions on "sflash":
0x00000000-0x00040000 : "boot"
0x00040000-0x00ff0000 : "linux"
0x001b9800-0x00ff0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x00ff0000-0x01000000 : "nvram"
u32 classifier
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
edward ====to register conntrack protocol helper for esp:
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
edward =======nf_nat_proto_esp_init
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 208k freed
Warning: unable to open an initial console.
Failed to execute /init
ctmisc: module license 'unspecified' taints kernel.
Register /dev/ctmisc device, major:10 minor:255
cmd=[touch /tmp/var/lib/nfs/xtab ]
cmd=[chmod 644 /tmp/var/lib/nfs/cmd=[touch /tmp/var/lib/nfs/rmtab ]
cmd=[chmod 644 /tmp/var/lib/nfs/rmtab ]
cmd=[touch /tmp/var/lib/nfs/state ]
cmd=[chmod go-rwx /tmp/var/lib/nfs/state ]
cmd=[touch /tmp/disk_updating_lock ]
cmd=[chmod 644 /tmp/disk_updating_lock ]
cmd=[touch /tmp/file_variable_updating_lock ]
cmd=[chmod 644 /tmp/file_variable_updating_lock ]
cmd=[/sbin/hotplug2 --coldplug & ]
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No sucory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No sucirectory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
The boot is CFE
Algorithmics/MIPS FPU Emulator v1.5
/dev/: cannot create
cmd=[misc -t get_mac -w 3 ]
ctmisc_ioctl: cmd=0x11, buffer size=196
data_init(): base = 0xbc03ef00
data_init(): location =1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get MAC count is [1]
get_data(): MAC 0: [58:6D:8F:07:8D:6C]
get_data(): done
cmd=[misc -t get_wsc_pin -w 3 ]
ctmisc_ioctl: cmd=0x26, buffer size=196
data_init(): base = 0xbc03fcdc
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get WSC count is [1]
get_data(): WSC 0: [12341641]
get_data(): done
cmd=[misc -t get_sn -w 3 ]
ctmisc_ioctl: cmd=0x15, buffer size=196
data_init(): base = 0xbc03fe30
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get SN count is [1]
get_data(): SN 0: [10B10C15149493]
get_data(): done
cmd=[misc -t get_country -w 3 ]
ctmisc_ioctl: cmd=0x2c, buffer size=196
data_init(): base = 0xbc03fe20
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get COUNTRY count is [0]
get_data(): done
cmd=[misc -t get_2g_country_code -w 3 ]
ctmisc_ioctl: cmd=0x2e, buffer size=196
data_init(): base = 0xbc03fe10
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 2G_COUNTRY_CODE count is [0]
get_data(): done
cmd=[misc -t get_5g_country_code -w 3 ]
ctmisc_ioctl: cmd=0x5e, buffer size=196
data_init(): base = 0xbc03fe00
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 5G_COUNTRY_CODE count is [0]
get_data(): done
cmd=[misc -t get_flash_type -w 1 ]
ctmisc_ioctl: cmd=0x17, buffer size=196
sflash_init: sflash type 0x100
sflash_init: sflash type 0x17
Flash Type: SFLASH 16384 kB
tallest:=====(ctmisc ioctl done...)=====
Get FLASH TYPE is [SFLASH 16384 kB]
cmd=[misc -t get_pa2ga0idxval -w 3 ]
ctmisc_ioctl: cmd=0x28, buffer size=196
data_init(): base = 0xbc03f6c0
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA0IDXVAL count is [1]
get_data(): PA2GA0IDXVAL 0: [3 0xfe54 0x1def 0xf8b0]
get_data(): done
cmd=[misc -t ctmisc_ioctl: cmd=0x2a, buffer size=196
get_pa2ga1idxvaldata_init(): base = 0xbc03f600
 -w 3 ]
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA1IDXVAL count is [1]
get_data(): PA2GA1IDXVAL 0: [3 0xfe66 0x1da5 0xf8d9]
get_data(): done
2G idx[3] w0a0[0xfe54] w1a0[0ctmisc_ioctl: cmd=0x38, buffer size=196
x1def] w2a0[0xf8data_init(): base = 0xbc03f4c0
b0]
2G idx[3] wdata_init(): location = [1], mydatas index = 1
0a1[0xfe66] w1a1ctmisc_ioctl: index=1
[0x1da5] w2a1[0xtallest:=====(ctmisc ioctl done...)=====
f8d9]
cmd=[misc -t get_pa5gha0idxval -w 3 ]
get_data(): Get PA5GHA0IDXVAL count is [1]
ctmisc_ioctl: cmd=0x3a, buffer size=1960x181f 0xfa9d]

get_data(): dondata_init(): base = 0xbc03f400
e
cmd=[misc -t data_init(): location = [1], mydatas index = 1
get_pa5gha1idxvactmisc_ioctl: index=1
l -w 3 ]
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GHA1IDXVAL count is [1]
get_data(): PA5GHA1IDXVAL 0: [1 0xfeb9 0x17c5 0xfaa4]
get_data(): done
5G high idx[0] w0a0[0xfebd]ctmisc_ioctl: cmd=0x3c, buffer size=196
 w1a0[0x181f] w2data_init(): base = 0xbc03f980
a0[0xfa9d]
5G hdata_init(): location = [0], mydatas index = 0
igh idx[1] w0a1[ctmisc_ioctl: index=0
0xfeb9] w1a1[0x1tallest:=====(ctmisc ioctl done...)=====
7c5] w2a1[0xfaa4]
cmd=[misc -t get_pa5gha2idxval -w 3 ]
get_data(): Get PA5GHA2IDXVAL count is [0]
get_data(): done
Using default 5G high PActmisc_ioctl: cmd=0x48, buffer size=196
2 value
cmd=[midata_init(): base = 0xbc03f2c0
sc -t get_pa5gladata_init(): location = [0], mydatas index = 0
0idxval -w 3 ]
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA0IDXVAL count is [0]
get_data(): done
cmd=[misc -t get_pa5gla1idxval -w 3 ]
ctmisc_ioctl: cmd=0x4a, buffer size=196
data_init(): base = 0xbc03f200
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA1IDXVAL count is [0]
get_data(): done
Using default 5G low PA0 value
Using default 5G low PA1 value
cmd=[misc -t get_pctmisc_ioctl: cmd=0x4c, buffer size=196
a5gla2idxval -w data_init(): base = 0xbc03f8c0
3 ]
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA2IDXVAL count is [0]
get_data(): done
Using default 5G low PA2 value
cmd=[misc -t get_pa5ga0idxval -w 3 ]
ctmisc_ioctl: cmd=0x58, buffer size=196
data_init(): base = 0xbc03f0c0
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA0IDXVAL count is [1]
get_data(): PA5GA0IDXVAL 0: [5 0xfe83 0x194e 0xfa1d]
get_data(): done
cmd=[misc -t ctmisc_ioctl: cmd=0x5a, buffer size=196
get_pa5ga1idxvaldata_init(): base = 0xbc03f000
 -w 3 ]
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA1IDXVAL count is [1]
get_data(): PA5GA1IDXVAL 0: [7 0xfe8a 0x198f 0xfa11]
get_data(): done
5G middle idx[5] w0a0[0xfe83]ctmisc_ioctl: cmd=0x5c, buffer size=196
 w1a0[0x194e] w2data_init(): base = 0xbc03f800
a0[0xfa1d]
5G mdata_init(): location = [0], mydatas index = 0
iddle idx[7] w0actmisc_ioctl: index=0
1[0xfe8a] w1a1[0tallest:=====(ctmisc ioctl done...)=====
x198f] w2a1[0xfa11]
cmd=[misc -t get_pa5ga2idxval -w 3 ]
get_data(): Get PA5GA2IDXVAL count is [0]
get_data(): done
Using default 5G middle PA2 value
Cannot find lang from /proc/mtd
ret = -1
www -> /www
mount: No such file or directory
cmd=[insmod emf ]
cmd=[insmod igs ]
cmd=[insmod ctf ]
cmd=[insmod /lib/ufsd.ko ]
modules[0]=et buf=[et ]
modules[1]=wl buf=[et wl ]
Needed modules: et wl
cmd=[insmod et ]
cmd=[insmod wl ]
cmd=[insmod usbcore ]
cmd=[insmod usb-storage ]
cmd=[insmod ehci-hcd log2_irq_thresh=3 qtdc_pid=48407 qtdc_vid=2652 qtdc0_ep=4 qtdc0_sz=]
cmd=[insmod wl_high instance_base=1 ]
wl1 is up in 0 sec
cmd=[insmod dnshook ]
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sey
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Hit enter to continue...The chipset is 47186 with a 53125 gigabit switch
cmd=[killall httpd ]
killall: httpd: no process killed
killall: check_http.sh: no process killed
cmd=[killall gn-httpd ]
killall: gn-httpd: no process killed
waitpid: No child processes
cmd=[killall gn-httpd ]
killall: gn-httpd: no process killed
waitpid: No child processeilled
waitpid: No child processes
cmd=[et robowr 0x02 0x06 0x001000a0 ]
cmd=[resetbutton ]
cmd=[vconfig set_name_type VLAN_PLUS_VID_NO_PAD ]
cmd=[vconfig add eth0 1 ]
cmd=[vconfig set_ingress_map vlan1 0 0 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 1 1 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 2 2 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 3 3 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 4 4 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 5 5 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 6 6 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 7 7 ]
waitpid: No child processes
cmd=[vconfig add eth0 2 ]
cmd=[vconfig set_ingress_map vlan2 0 0 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 1 1 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 2 2 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 3 3 ]
cmd=[vconfig set_ingress_map vlan2 4 4 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 5 5 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 6 6 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 7 7 ]
waitpid: No child processes
cmd=[brctl addbr br0 ]
cmd=[brctl setfd br0 0 ]
waitpid: No child processes
cmd=[brctl stp br0 dis ]
waitpid: No child processes
cmd=[brctl addif br0 vlan1 ]
waitpid: No child processes
br0: No child processes
cmd=[wlconf vlan1 up ]
vlan1: Operation not supported
Write wireless mac successfully
cmd=[brctl addif br0 eth1 ]
waitpid: No child processes
br0: No child processes
cmd=[wlconf eth1 up ]
eth1: Operation not supported
eth1: Operation not permitted
wlconf: PHYTYPE: 4
interface eth1: channel selected 1 (renew)
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
cmd=[brctl addif br0 eth1 ]
device eth1 is already a member of a bridge; can't enslave it to br No child processes
Write wireless mac successfully
cmd=[brctl addif br0 eth2 ]
waitpid: No child processes
br0: No child processes
cmd=[wlconf eth2 up ]
wlconf: PHYTYPE: 4
eth2: Invalid argument
eth2: Invalid argument
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
cmd=[brctl addif br0 eth2 ]
device eth2 is already a member of a bridge; can't enslave it to bridge br0.
waitpid: No child processes
cmd=[brctl addif br0 eth3 ]
interface eth3 does not exist!
eth3: No such device
lo: File exists
Set 66560 to /proc/sys/net/core/rmem_max ...
cmd=[tftpd -s /tmp -c -l -P 3200 ]
cmd=[cron ]
The boot is CFE
tftp server started
tftpd: standalone socket
cron: No such file or directory
cron: created
[HTTPD Starting on /www]
cmd=[httpd ]
cmd=[/tmp/wm-httpd -p 52000 -w ]
bind: Address already in use
cmd=[touch /tmp/hosts ]
waitpid: No child processes
cmd=[dnsmasq -R -h -i br0 -c 0 -r /tmp/resolv.conf ]
dnsmasq use dynamic port
cmd=[cesmDNS -o /tmp/.mdns_host_info -d ]
olllllllllllllllll
hahahhhhahhahhahha: Starting in daemon mode
11111111111111
br0 192.168.1.100  86400
write_dhcpd_conf: file=/tmp/dhcpd-br0.conf, ifname=br0, lan_ip=lan_ipaddr lan_mask=lan_nk
cmd=[dhcpd -cf /tmp/dhcpd-br0.conf -lf /tmp/dhcpd.leases -df /tmp/udhcpd.leases -pf /var]
Internet Systems Consortium DHCP Server 4.1.1-P1
Copyright 2004-2010 Internet Systems ConsortiuWrote 0 leases to leases file.
Listening on Socket/br0/192.168.1.0/24
Sending on   Socket/br0/192.168.1.0/24
cmd=[killall -SIGUSR1 upnp ]
killall: upnp: no process killed
cmd=[upnp -D -W vlan2 ]
UPnP::upnp_device_attach:br0: attach InternetGatewayDevice.xml
cmd=[/bin/eapd ]
ssdp byebye
UPnP::upnp_init:UPnP daemon is ready to run
cmd=[nas ]
cmd=[killall wps_monitor ]
killall: wps_monitor: no process killed
waitpid: No child procell wps_ap ]
killall: wps_ap: no process killed
waitpid: No child processes
cmd=[killall wps_enr ]
killall: wps_enr: no process killed
cmd=[killall -9 wps_monitor ]
killall: wps_monitor: no process killed
cmd=[/bin/wps_monitor ]
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
cmd=[adduser -p admin admin -g root ]
addgroup: group 0 already exists
641 nvram_commit(): start
adduser: /tmp/ftproot/admin: No such file or directory
Changing password for admin
641 nvram_commit(): end
Password for admin changed by root
cmd=[/usr/local/samba/bin/smbadduser admin admin ]
wps_gpio_led_blink: wps_led blinkon1=0, blinkoff1=0, blinkticks1=0, stopstag=0
wps_status_gpio_led_blink: wps_status_led blinkon1=0, blinkoff1=0, blinkticks1=0, loopti0
account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning0
accossword history), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change passw0
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returnin0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returnin0
account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning0
account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning0
account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change0
Added user admin.
cmd=[adduser -p guest guest -g guest ]
adduser: /tmp/ftproot/guest: No such file or directory
Changing password for guest
Password for guest changed by root
cmd=[/usr/local/samba/sbin/nmbd ]
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/seaddgroup: group 0 already exists
adduser: /tmp/ftproot/admin: No such file or directory
ChangiPassword for admin changed by root
cmd=[/usr/local/samba/bin/smbadduser admin admin ]
Added user admin.
cmd=[adduser -p guest guest -g guest ]
adduser: /tmp/ftproot/guest: No Password for guest changed by root
cmd=[/usr/local/samba/sbin/smbd ]
cmd=[/usr/local/samba/sbin/nmbd ]
cmd=[killall -9 vsftpd ]
killall: vsftpd: no process killed
cmd=[nlinkd ]
lltd:echo xxxxxxxxxxx > /proc/sys/kernel/hostname
LLTD: wireless interface argument is eth1.
cmd=[killall -1 radvd ]
killall: radvd: no process killed
cmd=[/sbin/monitor_cable ]
cmd=[arp -c ]
cmd=[touch /tmp/hosts ]
waitpid: No child processes
tallest:=====( wan_or_lan=wan )=====
Hit enter to continue...Hit enter to continue...


BusyBox v1.7.2 (2011-03-11 09:17:57 HKT) built-in shell (msh)
Enter 'help' for a list of built-in commands.

#
#