Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 3.1.4 (fli4l@eisler) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Tue Nov 29 16:40:40 CET 2011
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
- BIOS-e820: 0000000000100000 - 0000000007fec000 (usable)
- BIOS-e820: 0000000007fec000 - 0000000007ff0000 (reserved)
- BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
- BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU!
- MPS support code is not built-in.
- Using acpi=off or acpi=noirq or pci=noacpi may have problem
- DMI 2.3 present.
- DMI: Dell Computer Corporation Latitude CPi A366XT /Latitude CPi A366XT , BIOS A15 11/07/2001
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x7fec max_arch_pfn = 0x100000
- initial memory mapped : 0 - 01800000
- Base memory trampoline at [b009c000] 9c000 size 12288
- init_memory_mapping: 0000000000000000-0000000007fec000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0007c00000 page 2M
- 0007c00000 - 0007fec000 page 4k
- kernel direct mapping tables up to 7fec000 @ 17fb000-1800000
- RAMDISK: 07f60000 - 07fec000
- 127MB LOWMEM available.
- mapped low ram: 0 - 07fec000
- low ram: 0 - 07fec000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x00007fec
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x00007fec
- On node 0 totalpages: 32635
- free_area_init_node: node 0, pgdat b1253ee8, node_mem_map b7e60200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 224 pages used for memmap
- Normal zone: 28428 pages, LIFO batch:7
- Using APIC driver default
- APIC: disable apic facility
- APIC: switched to apic NOOP
- nr_irqs_gsi: 16
- Allocating PCI resources starting at 10100000 (gap: 10100000:efd00000)
- Booting paravirtualized kernel on bare hardware
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32379
- Kernel command line: load_ramdisk=1 initrd=rootfs.img fli4l_mode=normal nolapic noapic printk.time=0 acpi=off BOOT_IMAGE=kernel
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Initializing CPU#0
- Memory: 125700k/130992k available (1748k kernel code, 4840k reserved, 646k data, 324k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
- vmalloc : 0xb87ec000 - 0xfff9f000 (1143 MB)
- lowmem : 0xb0000000 - 0xb7fec000 ( 127 MB)
- .init : 0xb1257000 - 0xb12a8000 ( 324 kB)
- .data : 0xb11b5123 - 0xb1256a20 ( 646 kB)
- .text : 0xb1000000 - 0xb11b5123 (1748 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- NR_IRQS:288
- CPU 0 irqstacks, hard=b7808000 soft=b780a000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 364.005 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 728.01 BogoMIPS (lpj=3640050)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Intel Mobile Pentium II stepping 0a
- Performance Events:
- no APIC, boot with the "lapic" boot parameter to force-enable it.
- no hardware sampling interrupt available.
- p6 PMU driver.
- ... version: 0
- ... bit width: 32
- ... generic registers: 2
- ... value mask: 00000000ffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 0
- ... event mask: 0000000000000003
- Apic disabled
- print_constraints: dummy:
- NET: Registered protocol family 16
- EISA bus registered
- PCI: PCI BIOS revision 2.10 entry at 0xfc0ee, last bus=1
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Interpreter disabled.
- vgaarb: loaded
- PCI: Probing PCI hardware
- PCI: Probing PCI hardware (bus 00)
- pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
- pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
- pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
- pci 0000:00:03.0: [104c:ac1c] type 2 class 0x000607
- pci 0000:00:03.0: reg 10: [mem 0x00000000-0x00000fff]
- pci 0000:00:03.0: supports D1 D2
- pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:03.0: PME# disabled
- pci 0000:00:03.1: [104c:ac1c] type 2 class 0x000607
- pci 0000:00:03.1: reg 10: [mem 0x00000000-0x00000fff]
- pci 0000:00:03.1: supports D1 D2
- pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:03.1: PME# disabled
- pci 0000:00:07.0: [8086:7110] type 0 class 0x000680
- pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
- pci 0000:00:07.1: reg 20: [io 0x0860-0x086f]
- pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
- pci 0000:00:07.2: reg 20: [io 0xece0-0xecff]
- pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
- * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
- * this clock source is slow. Consider trying other clock sources
- pci 0000:00:07.3: quirk: [io 0x0800-0x083f] claimed by PIIX4 ACPI
- pci 0000:00:07.3: quirk: [io 0x0840-0x084f] claimed by PIIX4 SMB
- pci 0000:00:07.3: PIIX4 devres B PIO at 00e0-00e7
- pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f
- pci 0000:00:07.3: PIIX4 devres G PIO at 0280-0287
- pci 0000:00:0d.0: [10b7:9050] type 0 class 0x000200
- pci 0000:00:0d.0: reg 10: [io 0xec80-0xecbf]
- pci 0000:00:0d.0: reg 30: [mem 0xfb000000-0xfb00ffff pref]
- pci 0000:01:00.0: [10c8:0005] type 0 class 0x000300
- pci 0000:01:00.0: reg 10: [mem 0xf9000000-0xf9ffffff pref]
- pci 0000:01:00.0: reg 14: [mem 0xfdc00000-0xfdffffff]
- pci 0000:01:00.0: reg 18: [mem 0xfdb00000-0xfdbfffff]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.1: [10c8:8005] type 0 class 0x000401
- pci 0000:01:00.1: reg 10: [mem 0xf8c00000-0xf8ffffff pref]
- pci 0000:01:00.1: reg 14: [mem 0xfda00000-0xfdafffff]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeffffff]
- pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff pref]
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
- PCI: pci_cache_line_size set to 32 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 0000000007fec000 - 0000000007ffffff
- Switching to clocksource pit
- pnp: PnP ACPI: disabled
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:03.0: BAR 0: assigned [mem 0x14000000-0x14000fff]
- pci 0000:00:03.0: BAR 0: set to [mem 0x14000000-0x14000fff] (PCI address [0x14000000-0x14000fff])
- pci 0000:00:03.1: BAR 0: assigned [mem 0x18000000-0x18000fff]
- pci 0000:00:03.1: BAR 0: set to [mem 0x18000000-0x18000fff] (PCI address [0x18000000-0x18000fff])
- pci 0000:00:03.1: BAR 10: assigned [mem 0x1c000000-0x1fffffff]
- pci 0000:00:03.1: BAR 9: assigned [mem 0x20000000-0x23ffffff pref]
- pci 0000:00:03.1: BAR 8: assigned [io 0x1000-0x10ff]
- pci 0000:00:03.1: BAR 7: assigned [io 0x1400-0x14ff]
- pci 0000:00:03.0: BAR 10: assigned [mem 0x24000000-0x27ffffff]
- pci 0000:00:03.0: BAR 9: assigned [mem 0x28000000-0x2bffffff pref]
- pci 0000:00:03.0: BAR 8: assigned [io 0x1800-0x18ff]
- pci 0000:00:03.0: BAR 7: assigned [io 0x1c00-0x1cff]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeffffff]
- pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff pref]
- pci 0000:00:03.0: CardBus bridge to [bus 02-05]
- pci 0000:00:03.0: bridge window [io 0x1c00-0x1cff]
- pci 0000:00:03.0: bridge window [io 0x1800-0x18ff]
- pci 0000:00:03.0: bridge window [mem 0x28000000-0x2bffffff pref]
- pci 0000:00:03.0: bridge window [mem 0x24000000-0x27ffffff]
- pci 0000:00:03.1: CardBus bridge to [bus 06-09]
- pci 0000:00:03.1: bridge window [io 0x1400-0x14ff]
- pci 0000:00:03.1: bridge window [io 0x1000-0x10ff]
- pci 0000:00:03.1: bridge window [mem 0x20000000-0x23ffffff pref]
- pci 0000:00:03.1: bridge window [mem 0x1c000000-0x1fffffff]
- PCI: setting IRQ 11 as level-triggered
- pci 0000:00:03.0: found PCI INT A -> IRQ 11
- pci 0000:00:03.0: sharing IRQ 11 with 0000:00:03.1
- pci 0000:00:03.0: sharing IRQ 11 with 0000:00:07.2
- pci 0000:00:03.1: found PCI INT A -> IRQ 11
- pci 0000:00:03.1: sharing IRQ 11 with 0000:00:03.0
- pci 0000:00:03.1: sharing IRQ 11 with 0000:00:07.2
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeffffff]
- pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf9ffffff pref]
- pci_bus 0000:02: resource 0 [io 0x1c00-0x1cff]
- pci_bus 0000:02: resource 1 [io 0x1800-0x18ff]
- pci_bus 0000:02: resource 2 [mem 0x28000000-0x2bffffff pref]
- pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff]
- pci_bus 0000:06: resource 0 [io 0x1400-0x14ff]
- pci_bus 0000:06: resource 1 [io 0x1000-0x10ff]
- pci_bus 0000:06: resource 2 [mem 0x20000000-0x23ffffff pref]
- pci_bus 0000:06: resource 3 [mem 0x1c000000-0x1fffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- pci 0000:01:00.0: Boot video device
- PCI: CLS 32 bytes, default 32
- INITRAMFS: delaying decompression of initramfs to make use of tmpfs...
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 245
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered (default)
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- brd: module loaded
- loop: module loaded
- i8042: PNP: No PS/2 controller found. Probing ports directly.
- Switching to clocksource tsc
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- Using IPI Shortcut mode
- console [netcon0] enabled
- netconsole: network logging started
- drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- INITRAMFS: Trying to mount tmpfs using options 'mode=755'.
- INITRAMFS: tmpfs mounted.
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 560k freed
- Freeing unused kernel memory: 324k freed
- input: PC Speaker as /devices/platform/pcspkr/input/input1
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
- uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:03.0
- uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:03.1
- uhci_hcd 0000:00:07.2: UHCI Host Controller
- uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:07.2: irq 11, io base 0x0000ece0
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: UHCI Host Controller
- usb usb1: Manufacturer: Linux 3.1.4 uhci_hcd
- usb usb1: SerialNumber: 0000:00:07.2
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- Uniform Multi-Platform E-IDE driver
- ide-gd driver 1.18
- piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
- piix 0000:00:07.1: IDE port disabled
- piix 0000:00:07.1: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0x0860-0x0867
- Probing IDE interface ide0...
- hda: TOSHIBA MK1924FCV, ATA DISK drive
- hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- hda: MWDMA2 mode selected
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- hda: max request size: 128KiB
- hda: 1061712 sectors (543 MB) w/128KiB Cache, CHS=1053/16/63
- hda: hda1 hda2
- rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one day, 114 bytes nvram
- yenta_cardbus 0000:00:03.0: CardBus bridge found [1028:0088]
- yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI
- yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI
- yenta_cardbus 0000:00:03.0: TI: mfunc 0x01261222, devctl 0x66
- yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0298, PCI irq 11
- yenta_cardbus 0000:00:03.0: Socket status: 30000020
- yenta_cardbus 0000:00:03.1: CardBus bridge found [1028:0088]
- yenta_cardbus 0000:00:03.1: Using CSCINT to route CSC interrupts to PCI
- yenta_cardbus 0000:00:03.1: Routing CardBus interrupts to PCI
- yenta_cardbus 0000:00:03.1: TI: mfunc 0x01261222, devctl 0x66
- yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0298, PCI irq 11
- yenta_cardbus 0000:00:03.1: Socket status: 30000020
- pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
- pci 0000:02:00.0: [10ec:8169] type 0 class 0x000200
- pci 0000:02:00.0: reg 10: [io 0x0000-0x00ff]
- pci 0000:02:00.0: reg 14: [mem 0x00000000-0x000001ff]
- pci 0000:02:00.0: reg 30: [mem 0xbefc0000-0xbefdffff pref]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.0: PME# supported from D1 D2 D3hot
- pci 0000:02:00.0: PME# disabled
- pci 0000:02:00.0: BAR 6: assigned [mem 0x28000000-0x2801ffff pref]
- pci 0000:02:00.0: BAR 1: assigned [mem 0x24000000-0x240001ff]
- pci 0000:02:00.0: BAR 1: set to [mem 0x24000000-0x240001ff] (PCI address [0x24000000-0x240001ff])
- pci 0000:02:00.0: BAR 0: assigned [io 0x1c00-0x1cff]
- pci 0000:02:00.0: BAR 0: set to [io 0x1c00-0x1cff] (PCI address [0x1c00-0x1cff])
- pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
- pci 0000:06:00.0: [168c:0023] type 0 class 0x000280
- pci 0000:06:00.0: reg 10: [mem 0x00000000-0x0000ffff]
- pci 0000:06:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff]
- pci 0000:06:00.0: BAR 0: set to [mem 0x1c000000-0x1c00ffff] (PCI address [0x1c000000-0x1c00ffff])
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x280-0x287 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3df 0x3f0-0x3ff
- pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xf0000-0xfffff
- pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
- pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
- pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
- pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
- pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x280-0x287 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3df 0x3f0-0x3ff
- pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xf0000-0xfffff
- pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
- pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
- hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
- hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1033207, sector=1033184
- hda: possibly failed opcode: 0xc8
- end_request: I/O error, dev hda, sector 1033184
- Buffer I/O error on device hda2, logical block 120832
- Buffer I/O error on device hda2, logical block 120833
- Buffer I/O error on device hda2, logical block 120834
- hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
- hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1033207, sector=1033200
- hda: possibly failed opcode: 0xc8
- end_request: I/O error, dev hda, sector 1033200
- Buffer I/O error on device hda2, logical block 120834
- hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
- hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1033207, sector=1033200
- hda: possibly failed opcode: 0xc8
- end_request: I/O error, dev hda, sector 1033200
- Buffer I/O error on device hda2, logical block 120834
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (hda2): warning: mounting fs with errors, running e2fsck is recommended
- EXT3-fs (hda2): using internal journal
- EXT3-fs (hda2): mounted filesystem with writeback data mode
- NET: Registered protocol family 10
- Bridge firewalling registered
- cfg80211: Calling CRDA to update world regulatory domain
- cfg80211: World regulatory domain updated:
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: Calling CRDA for country: AT
- cfg80211: Regulatory domain changed to country: AT
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- PCI: setting IRQ 10 as level-triggered
- 3c59x 0000:00:0d.0: found PCI INT A -> IRQ 10
- 3c59x: Donald Becker and others.
- 0000:00:0d.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001ec80.
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:02:00.0: enabling device (0000 -> 0003)
- r8169 0000:02:00.0: (unregistered net_device): not PCI Express
- r8169 0000:02:00.0: setting latency timer to 64
- r8169 0000:02:00.0: eth1: RTL8169sb/8110sb at 0xb8ad0000, 00:10:60:26:38:7b, XID 10000000 IRQ 11
- PPP generic driver version 2.4.2
- ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
- HiSax: Linux Driver for passive ISDN cards
- HiSax: Version 3.5 (module)
- HiSax: Layer1 Revision 2.46.2.5
- HiSax: Layer2 Revision 2.30.2.4
- HiSax: TeiMgr Revision 2.20.2.3
- HiSax: Layer3 Revision 2.22.2.3
- HiSax: LinkLayer Revision 2.59.2.4
- HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0)
- usbcore: registered new interface driver hfc_usb
- device eth1 entered promiscuous mode
- r8169 0000:02:00.0: eth1: link down
- r8169 0000:02:00.0: eth1: link down
- ADDRCONF(NETDEV_UP): eth1: link is not ready
- eth0: setting full-duplex.
- r8169 0000:02:00.0: eth1: link up
- ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- br0: port 1(eth1) entering forwarding state
- br0: port 1(eth1) entering forwarding state
- ip_tables: (C) 2000-2006 Netfilter Core Team
- nf_conntrack version 0.5.0 (1977 buckets, 7908 max)
- br0: no IPv6 routers present
- eth0: no IPv6 routers present
- eth1: no IPv6 routers present
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- device tap0 entered promiscuous mode
- br0: port 2(tap0) entering forwarding state
- br0: port 2(tap0) entering forwarding state
- device tap1 entered promiscuous mode
- br0: port 3(tap1) entering forwarding state
- br0: port 3(tap1) entering forwarding state
- br0: port 1(eth1) entering forwarding state
- spurious 8259A interrupt: IRQ7.
- tap0: no IPv6 routers present
- tap1: no IPv6 routers present
- br0: port 2(tap0) entering forwarding state
- br0: port 3(tap1) entering forwarding state
- spurious 8259A interrupt: IRQ15.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement