SeaBIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) binutils: version 2.23.52.0.1-55.el7 20130226
No Xen hypervisor found.
Running on QEMU (i440fx)
RamSize: 0x00100000 [cmos]
Relocating init from 0x000dc230 to 0x0007d7e0 (size 75760)
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
WARNING - Unable to allocate resource at romfile_loadfile:65!
RamSizeOver4G: 0x0000000000000000 [cmos]
Moving pm_base to 0x600
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
=== PCI device probing ===
Found 6 PCI devices (max PCI bus is 00)
=== PCI new allocation pass #1 ===
PCI: check devices
=== PCI new allocation pass #2 ===
PCI: IO: c000 - c04f
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0  bar 1, addr 0000c000, size 00000040 [io]
PCI: map device bdf=00:01.1  bar 4, addr 0000c040, size 00000010 [io]
PCI: map device bdf=00:03.0  bar 6, addr feb80000, size 00040000 [mem]
PCI: map device bdf=00:03.0  bar 0, addr febc0000, size 00020000 [mem]
PCI: map device bdf=00:02.0  bar 6, addr febe0000, size 00010000 [mem]
PCI: map device bdf=00:02.0  bar 2, addr febf0000, size 00001000 [mem]
PCI: map device bdf=00:02.0  bar 0, addr fd000000, size 01000000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:02.0 id=1234:1111
PCI: init bdf=00:03.0 id=8086:100e
PCI: Using 00:02.0 for primary VGA
Found 1 cpu(s) max supported 1 cpu(s)
Copying PIR from 0x0008fd20 to 0x000f6cc0
Copying MPTABLE from 0x00006dfc/74840 to 0x000f6be0
WARNING - Unable to allocate resource at smbios_romfile_setup:426!
WARNING - Unable to allocate resource at smbios_legacy_setup:516!
WARNING - Unable to allocate resource at romfile_loadfile:65!
WARNING - Unable to allocate resource at build_fadt:123!
WARNING - Unable to allocate resource at build_ssdt:326!
WARNING - Unable to allocate resource at build_madt:155!
WARNING - Unable to allocate resource at build_hpet:441!
WARNING - Unable to allocate resource at romfile_loadfile:65!
WARNING - Unable to allocate resource at acpi_setup:670!
Scan for VGA option rom
Running option rom at c000:0003
Start SeaVGABIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org)
VGABUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) binutils: version 2.23.52.0.1-55.el7 20130226
enter vga_post:
   a=00000010  b=0000ffff  c=00000000  d=0000ffff ds=0000 es=f000 ss=0000
  si=00000000 di=00007090 bp=00000000 sp=00006d0e cs=f000 ip=d27b  f=0000
VBE DISPI: bdf 00:02.0, bar 0
VBE DISPI: lfb_addr=fd000000, size 16 MB
Attempting to allocate VGA stack via pmm call to f000:d332
pmm call arg1=0
VGA stack allocated at edfa0
Turning on vga text mode console
set VGA mode 3
SeaBIOS (version rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org)
PS2 keyboard initialized
Found 1 lpt ports
Found 1 serial ports
Searching bootorder for: /pci@i0cf8/isa@1/fdc@03f0/floppy@0
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Scan for option roms
Running option rom at c980:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@3
Searching bootorder for: /rom@genroms/kvmvapic.bin
Searching bootorder for: HALT
Running option rom at d980:0003
Space available for UMB: dc000-ed000, f6540-f6b10
e820 map has 4 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
  NULL
Booting from Hard Disk...
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from Floppy...
floppy error: 40 00 00 00 00 01 02
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from DVD/CD...
Device reports MEDIUM NOT PRESENT
scsi_is_ready returned -1
Boot failed: Could not read from CDROM (code 0003)
enter handle_18:
  NULL
Booting from ROM...
Booting from c980:0361