sam@sam:~$ sudo apt-get libsdl1.2debian
[sudo] password for sam:
E: Invalid operation libsdl1.2debian
sam@sam:~$ sudo apt-get install libsdl1.2debian
Reading package lists... Done
Building dependency tree
Reading state information... Done
libsdl1.2debian is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
sam@sam:~$ sudo apt-get install libsdl1.2debian-pulseaudion
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libsdl1.2debian-pulseaudion
E: Couldn't find any package by regex 'libsdl1.2debian-pulseaudion'
sam@sam:~$ sudo apt-get install libsdl1.2debian-pulseaudio
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libsdl1.2debian-pulseaudio is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However, the following packages replace it:
  libsdl1.2debian

E: Package 'libsdl1.2debian-pulseaudio' has no installation candidate
sam@sam:~$ sudo apt-get install pulseaudio
Reading package lists... Done
Building dependency tree
Reading state information... Done
pulseaudio is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
sam@sam:~$ sudo apt-get install libsdl1.2debian
Reading package lists... Done
Building dependency tree
Reading state information... Done
libsdl1.2debian is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
sam@sam:~$ sudo apt-get install xbmc
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcec2 liblockdev1 liblzo2-2 libmicrohttpd5 libmysqlclient18 libnfs1
  libpcrecpp0 libshairport1 libtinyxml2.6.2 libva-glx1 libva-x11-1 libvdpau1
  mysql-common python-bluez swig swig2.0 xbmc-bin xbmc-pvr-argustv
  xbmc-pvr-dvbviewer xbmc-pvr-mediaportal-tvserver xbmc-pvr-mythtv-cmyth
  xbmc-pvr-nextpvr xbmc-pvr-njoy xbmc-pvr-tvheadend-hts xbmc-pvr-vdr-vnsi
  xbmc-pvr-vuplus
Suggested packages:
  nvidia-vdpau-driver vdpau-driver swig-doc swig-examples swig2.0-examples
  swig2.0-doc xbmc-test-helper libva-intel-vaapi-driver
The following NEW packages will be installed:
  libcec2 liblockdev1 liblzo2-2 libmicrohttpd5 libmysqlclient18 libnfs1
  libpcrecpp0 libshairport1 libtinyxml2.6.2 libva-glx1 libva-x11-1 libvdpau1
  mysql-common python-bluez swig swig2.0 xbmc xbmc-bin xbmc-pvr-argustv
  xbmc-pvr-dvbviewer xbmc-pvr-mediaportal-tvserver xbmc-pvr-mythtv-cmyth
  xbmc-pvr-nextpvr xbmc-pvr-njoy xbmc-pvr-tvheadend-hts xbmc-pvr-vdr-vnsi
  xbmc-pvr-vuplus
0 upgraded, 27 newly installed, 0 to remove and 9 not upgraded.
Need to get 39.1 MB of archives.
After this operation, 87.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? n
Abort.
sam@sam:~$  cat /dev/urandom | pacat
^C
sam@sam:~$ sudo apt-get install xbmc
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcec2 liblockdev1 liblzo2-2 libmicrohttpd5 libmysqlclient18 libnfs1
  libpcrecpp0 libshairport1 libtinyxml2.6.2 libva-glx1 libva-x11-1 libvdpau1
  mysql-common python-bluez swig swig2.0 xbmc-bin xbmc-pvr-argustv
  xbmc-pvr-dvbviewer xbmc-pvr-mediaportal-tvserver xbmc-pvr-mythtv-cmyth
  xbmc-pvr-nextpvr xbmc-pvr-njoy xbmc-pvr-tvheadend-hts xbmc-pvr-vdr-vnsi
  xbmc-pvr-vuplus
Suggested packages:
  nvidia-vdpau-driver vdpau-driver swig-doc swig-examples swig2.0-examples
  swig2.0-doc xbmc-test-helper libva-intel-vaapi-driver
The following NEW packages will be installed:
  libcec2 liblockdev1 liblzo2-2 libmicrohttpd5 libmysqlclient18 libnfs1
  libpcrecpp0 libshairport1 libtinyxml2.6.2 libva-glx1 libva-x11-1 libvdpau1
  mysql-common python-bluez swig swig2.0 xbmc xbmc-bin xbmc-pvr-argustv
  xbmc-pvr-dvbviewer xbmc-pvr-mediaportal-tvserver xbmc-pvr-mythtv-cmyth
  xbmc-pvr-nextpvr xbmc-pvr-njoy xbmc-pvr-tvheadend-hts xbmc-pvr-vdr-vnsi
  xbmc-pvr-vuplus
0 upgraded, 27 newly installed, 0 to remove and 9 not upgraded.
Need to get 39.1 MB of archives.
After this operation, 87.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? n
Abort.
sam@sam:~$  cat /dev/urandom | pacat
^C
sam@sam:~$ pacmd
Welcome to PulseAudio! Use "help" for usage information.
>>> list-sinks
1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9959
	volume: 0:  30% 1:  30%
	        0: -31.38 dB 1: -31.38 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 4.00 .. 371.52 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 4
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC272X Analog"
		alsa.id = "ALC272X Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel"
		alsa.long_card_name = "HDA Intel at 0xb4400000 irq 43"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel IbexPeak HDMI"
		alsa.components = "HDA:10ec0272,10250487,00100001 HDA:80862804,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, available: unknown)
			properties:

		analog-output-headphones: Headphones (priority 9000, available: no)
			properties:

	active port: <analog-output-speaker>
>>> list-samples
1 cache entrie(s) available.
    name: <bell-window-system>
	index: 0
	sample spec: s16le 1ch 44100Hz
	channel map: mono
	             Mono
	length: 17640
	duration: 0.2 s
	volume: n/a
	        n/a
	        balance 0.00
	lazy: no
	filename: <n/a>
	properties:
		media.role = "event"
		application.process.id = "3527"
		application.name = "gnome-terminal"
		event.description = "Bell event"
		event.id = "bell-window-system"
		media.name = "bell-window-system"
		media.filename = "/usr/share//sounds/ubuntu/stereo/bell.ogg"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "26"
		window.x11.display = ":0"
		window.x11.screen = "0"
		application.process.user = "sam"
		application.process.host = "sam"
		application.process.binary = "metacity"
		application.language = "en_CA.UTF-8"
		application.process.machine_id = "f4f2d7769bb2b5ff1d06c2db00000009"
		application.process.session_id = "f4f2d7769bb2b5ff1d06c2db00000009-1397345682.396966-1885948939"