Advertisement
dpeca

Untitled

Mar 21st, 2014
278
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.58 KB | None | 0 0
  1. root@tvrdojezgro ~ # smartctl -a /dev/sdb
  2. smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: ST3000DM001-9YN166
  7. Serial Number: S1F080KK
  8. Firmware Version: CC4C
  9. User Capacity: 3,000,592,982,016 bytes
  10. Device is: Not in smartctl database [for details use: -P showall]
  11. ATA Version is: 8
  12. ATA Standard is: ATA-8-ACS revision 4
  13. Local Time is: Fri Mar 21 23:03:02 2014 CET
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x00) Offline data collection activity
  22. was never started.
  23. Auto Offline Data Collection: Disabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 584) seconds.
  29. Offline data collection
  30. capabilities: (0x73) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. No Offline surface scan supported.
  35. Self-test supported.
  36. Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 1) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 255) minutes.
  47. Conveyance self-test routine
  48. recommended polling time: ( 2) minutes.
  49. SCT capabilities: (0x3085) SCT Status supported.
  50.  
  51. SMART Attributes Data Structure revision number: 10
  52. Vendor Specific SMART Attributes with Thresholds:
  53. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  54. 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 54515264
  55. 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
  56. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 6
  57. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  58. 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 496677425
  59. 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 9696
  60. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  61. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6
  62. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  63. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  64. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 157
  65. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 4295032834
  66. 189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4
  67. 190 Airflow_Temperature_Cel 0x0022 067 058 045 Old_age Always - 33 (Lifetime Min/Max 27/35)
  68. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  69. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3
  70. 193 Load_Cycle_Count 0x0032 073 073 000 Old_age Always - 54240
  71. 194 Temperature_Celsius 0x0022 033 042 000 Old_age Always - 33 (0 19 0 0)
  72. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  75. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 109775069127389
  76. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 188555405303587
  77. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 184672968003777
  78.  
  79. SMART Error Log Version: 1
  80. ATA Error Count: 157 (device log contains only the most recent five errors)
  81. CR = Command Register [HEX]
  82. FR = Features Register [HEX]
  83. SC = Sector Count Register [HEX]
  84. SN = Sector Number Register [HEX]
  85. CL = Cylinder Low Register [HEX]
  86. CH = Cylinder High Register [HEX]
  87. DH = Device/Head Register [HEX]
  88. DC = Device Command Register [HEX]
  89. ER = Error register [HEX]
  90. ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 157 occurred at disk power-on lifetime: 7377 hours (307 days + 9 hours)
  96. When the command that caused the error occurred, the device was active or idle.
  97.  
  98. After command completion occurred, registers were:
  99. ER ST SC SN CL CH DH
  100. -- -- -- -- -- -- --
  101. 40 51 00 ff ff ff 0f
  102.  
  103. Commands leading to the command that caused the error were:
  104. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  105. -- -- -- -- -- -- -- -- ---------------- --------------------
  106. 60 00 90 ff ff ff 4f 00 8d+20:47:55.387 READ FPDMA QUEUED
  107. 60 00 10 ff ff ff 4f 00 8d+20:47:55.373 READ FPDMA QUEUED
  108. 60 00 78 ff ff ff 4f 00 8d+20:47:55.343 READ FPDMA QUEUED
  109. 60 00 20 ff ff ff 4f 00 8d+20:47:55.295 READ FPDMA QUEUED
  110. 60 00 48 ff ff ff 4f 00 8d+20:47:55.268 READ FPDMA QUEUED
  111.  
  112. Error 156 occurred at disk power-on lifetime: 7344 hours (306 days + 0 hours)
  113. When the command that caused the error occurred, the device was active or idle.
  114.  
  115. After command completion occurred, registers were:
  116. ER ST SC SN CL CH DH
  117. -- -- -- -- -- -- --
  118. 40 51 00 ff ff ff 0f
  119.  
  120. Commands leading to the command that caused the error were:
  121. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  122. -- -- -- -- -- -- -- -- ---------------- --------------------
  123. 60 00 08 ff ff ff 4f 00 7d+12:03:17.653 READ FPDMA QUEUED
  124. ef 10 02 00 00 00 a0 00 7d+12:03:17.652 SET FEATURES [Reserved for Serial ATA]
  125. 27 00 00 00 00 00 e0 00 7d+12:03:17.652 READ NATIVE MAX ADDRESS EXT
  126. ec 00 00 00 00 00 a0 00 7d+12:03:17.652 IDENTIFY DEVICE
  127. ef 03 46 00 00 00 a0 00 7d+12:03:17.652 SET FEATURES [Set transfer mode]
  128.  
  129. Error 155 occurred at disk power-on lifetime: 7344 hours (306 days + 0 hours)
  130. When the command that caused the error occurred, the device was active or idle.
  131.  
  132. After command completion occurred, registers were:
  133. ER ST SC SN CL CH DH
  134. -- -- -- -- -- -- --
  135. 40 51 00 ff ff ff 0f
  136.  
  137. Commands leading to the command that caused the error were:
  138. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  139. -- -- -- -- -- -- -- -- ---------------- --------------------
  140. 60 00 08 ff ff ff 4f 00 7d+12:03:14.802 READ FPDMA QUEUED
  141. ef 10 02 00 00 00 a0 00 7d+12:03:14.801 SET FEATURES [Reserved for Serial ATA]
  142. 27 00 00 00 00 00 e0 00 7d+12:03:14.801 READ NATIVE MAX ADDRESS EXT
  143. ec 00 00 00 00 00 a0 00 7d+12:03:14.801 IDENTIFY DEVICE
  144. ef 03 46 00 00 00 a0 00 7d+12:03:14.801 SET FEATURES [Set transfer mode]
  145.  
  146. Error 154 occurred at disk power-on lifetime: 7344 hours (306 days + 0 hours)
  147. When the command that caused the error occurred, the device was active or idle.
  148.  
  149. After command completion occurred, registers were:
  150. ER ST SC SN CL CH DH
  151. -- -- -- -- -- -- --
  152. 40 51 00 ff ff ff 0f
  153.  
  154. Commands leading to the command that caused the error were:
  155. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  156. -- -- -- -- -- -- -- -- ---------------- --------------------
  157. 60 00 08 ff ff ff 4f 00 7d+12:03:11.927 READ FPDMA QUEUED
  158. 61 00 08 ff ff ff 4f 00 7d+12:03:11.927 WRITE FPDMA QUEUED
  159. ef 10 02 00 00 00 a0 00 7d+12:03:11.926 SET FEATURES [Reserved for Serial ATA]
  160. 27 00 00 00 00 00 e0 00 7d+12:03:11.926 READ NATIVE MAX ADDRESS EXT
  161. ec 00 00 00 00 00 a0 00 7d+12:03:11.926 IDENTIFY DEVICE
  162.  
  163. Error 153 occurred at disk power-on lifetime: 7344 hours (306 days + 0 hours)
  164. When the command that caused the error occurred, the device was active or idle.
  165.  
  166. After command completion occurred, registers were:
  167. ER ST SC SN CL CH DH
  168. -- -- -- -- -- -- --
  169. 40 51 00 ff ff ff 0f
  170.  
  171. Commands leading to the command that caused the error were:
  172. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  173. -- -- -- -- -- -- -- -- ---------------- --------------------
  174. 60 00 08 ff ff ff 4f 00 7d+12:03:09.076 READ FPDMA QUEUED
  175. ef 10 02 00 00 00 a0 00 7d+12:03:09.076 SET FEATURES [Reserved for Serial ATA]
  176. 27 00 00 00 00 00 e0 00 7d+12:03:09.076 READ NATIVE MAX ADDRESS EXT
  177. ec 00 00 00 00 00 a0 00 7d+12:03:09.075 IDENTIFY DEVICE
  178. ef 03 46 00 00 00 a0 00 7d+12:03:09.075 SET FEATURES [Set transfer mode]
  179.  
  180. SMART Self-test log structure revision number 1
  181. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  182. # 1 Extended offline Completed without error 00% 9694 -
  183. # 2 Extended offline Aborted by host 90% 9687 -
  184. # 3 Extended offline Completed without error 00% 9668 -
  185. # 4 Extended offline Completed without error 00% 5 -
  186.  
  187. SMART Selective self-test log data structure revision number 1
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Not_testing
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement