API tools faq
paste
Advertisement
Guest User

pcduino8_ubuntu14.04_20160102_preinstalled_opencv2.4.11

a guest
Jan 20th, 2016
250
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.93 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. rtc[1] value = 0x00010000
  4. rtc[2] value = 0x00020000
  5. rtc[3] value = 0x00030000
  6. DRAM DRIVE INFO: V1.0
  7. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  8. DRAM normal_mode value: 00000001
  9. DRAM CLK =672 MHZ
  10. PMU: AXP81X
  11. ddr voltage = 1200 mv
  12. using ic A83T
  13. using axp AXP813
  14. DRAM zq value: 00003bfb
  15. dram size =2048
  16. card boot number = 0
  17. card no is 0
  18. sdcard 0 line count 0
  19. [mmc]: mmc driver ver 2014-8-11 15:06:39
  20. [mmc]: ***Try SD card 0***
  21. [mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  22. [mmc]: vendor: Man 00035344 Snr 1013290e
  23. [mmc]: product: SU08G
  24. [mmc]: revision: 8.0
  25. [mmc]: ***SD/MMC 0 init OK!!!***
  26. sdcard 0 init ok
  27. ERROR! NOT find the head of uboot.
  28. The size of uboot is 000dc000.
  29. sum=729ec1b3
  30. src_sum=729ec1b3
  31. Succeed in loading uboot from sdmmc flash.
  32. Ready to disable icache.
  33. Jump to secend Boot.
  34. [ 0.318]
  35.  
  36. U-Boot 2011.09-rc1-00000-g680009d-dirty (Oct 19 2015 - 15:01:04) Allwinner Technology
  37.  
  38. [ 0.327]version: 2.1.0
  39. normal mode
  40. [ 0.408]pmbus: normal or secure os
  41. ready
  42. not set main pmu id
  43. [ 0.416]PMU: AXP81X
  44. [ 0.418]PMU: AXP81X found
  45. bat_vol=269, ratio=100
  46. [ 0.423]PMU: dcdc2 900
  47. [ 0.426]PMU: pll1 1008 Mhz
  48. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  49. set power on vol to default
  50. dcdc1_vol = 3300, onoff=1
  51. dcdc2_vol = 900, onoff=1
  52. dcdc3_vol = 900, onoff=1
  53. dcdc4_vol = 900, onoff=1
  54. dcdc5_vol = 1500, onoff=1
  55. dcdc6_vol = 900, onoff=1
  56. aldo1_vol = 1800, onoff=1
  57. aldo2_vol = 1800, onoff=1
  58. aldo3_vol = 3000, onoff=1
  59. fldo2_vol = 900, onoff=1
  60. dldo1_vol = 3300, onoff=0
  61. find power_sply to end
  62. supply=dcdc1
  63. axp=axp81x, supply=dcdc1, vol=3300
  64. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  65. supply=dcdc1
  66. axp=axp81x, supply=dcdc1, vol=3300
  67. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  68. supply=dldo4
  69. axp=axp81x, supply=dldo4, vol=3300
  70. reg addr=0x1c20b0c, value=0xd, pmu_vol=3300
  71. supply=dcdc1
  72. axp=axp81x, supply=dcdc1, vol=3300
  73. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  74. supply=dcdc1
  75. axp=axp81x, supply=dcdc1, vol=3300
  76. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  77. supply=dcdc1
  78. axp=axp81x, supply=dcdc1, vol=3300
  79. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  80. supply=dcdc1
  81. axp=axp81x, supply=dcdc1, vol=3300
  82. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  83. supply=aldo3
  84. axp=axp81x, supply=aldo3, vol=3300
  85. reg addr=0x1f02f00, value=0xd, pmu_vol=3300
  86. config gpio bias voltage finish
  87. vbus exist
  88. no battery, limit to dc
  89. ac100 reg 0x00 = 0x101
  90. ac100 reg 0xd0 = 0x0
  91. ac100 reg 0xd1 = 0x0
  92. fel key old mode
  93. run key detect
  94. no key found
  95. no key input
  96. dram_para_set start
  97. dram_para_set end
  98. [ 0.641]DRAM: 2 GiB
  99. relocation Offset is: 75b00000
  100. [box standby] read rtc = 0x0
  101. [box_start_os] mag be start_type no use
  102. user_gpio config
  103. user_gpio ok
  104. gic: normal or no secure os mode
  105. workmode = 0
  106. MMC: 0
  107. [ 0.870][mmc]: mmc driver ver 2014-10-10 13:22:35
  108. [ 0.875][mmc]: get sdc_f_max fail,use default sdc_f_max 48000000
  109. [ 0.881][mmc]: get sdc_ex_dly_used fail,use default dly
  110. [ 0.887][mmc]: SUNXI SD/MMC: 0
  111. [ 0.900][mmc]: ************Try SD card 0************
  112. [ 0.947][mmc]: MID 000003 PSN 1013290e
  113. [ 0.950][mmc]: PNM SU08G -- 0x53-55-30-38-47-05
  114. [ 0.955][mmc]: PRV 8.0
  115. [ 0.957][mmc]: MDT m-6 y-2013
  116. [ 0.961][mmc]: ---------------mmc->clock 46153846-----------
  117. [ 0.966][mmc]: ---------------mmc->bus_width 4--------------
  118. [ 0.972][mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  119. [ 0.977][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  120. [ 0.982][mmc]: ************SD/MMC 0 init OK!!!************
  121. [ 0.989]sunxi flash init ok
  122. script config pll_de to 504 Mhz
  123. script config pll_video1 to 297 Mhz
  124. enable power vcc-hdmi-18, ret=0
  125. [TV]gm7121_module_init begin
  126. DRV_DISP_Init end
  127. boot_disp.auto_hpd=0
  128. not auto hotplud for homlet, the default output_type is 4
  129. [disk_read_fs] no the partition
  130. error: open config.fex, maybe it is not exist
  131. attched ok, mgr0<-->device1, type=4, mode=4----
  132. ready to set mode
  133. [ 1.144]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
  134. fail to find part named env
  135. Using default environment
  136.  
  137. In: serial
  138. Out: serial
  139. Err: serial
  140. --------fastboot partitions--------
  141. mbr not exist
  142. base bootcmd=run load_env setargs_mmc boot_normal
  143. bootcmd set setargs_mmc
  144. key 0
  145. cant find rcvy value
  146. cant find fstbt value
  147. no misc partition is found
  148. misc_message->command = 0
  149. to be run cmd=run load_env setargs_mmc boot_normal
  150. the private part isn't exist
  151. mount part name
  152. [disk_read_fs] no the partition
  153. cant open script.bin, maybe it is not exist
  154. WORK_MODE_BOOT
  155. adver not need show
  156. sunxi_bmp_logo_display
  157. [ 1.369][mmc]: blkcnt should not be 0
  158. [ 1.392]screen_id =0, screen_width =1280, screen_height =720
  159. [ 1.398]frame buffer address 46400000
  160. [ 1.402]Hit any key to stop autoboot: 0
  161. [ 2.491][mmc]: blkcnt should not be 0
  162. [ 2.803][mmc]: blkcnt should not be 0
  163. ## Booting kernel from Legacy Image at 40007800 ...
  164. Image Name: Linux-3.4.39
  165. Image Type: ARM Linux Kernel Image (uncompressed)
  166. Data Size: 6828232 Bytes = 6.5 MiB
  167. Load Address: 40008000
  168. Entry Point: 40008000
  169. Verifying Checksum ... OK
  170. Loading Kernel Image ... OK
  171. OK
  172. [ 2.954][mmc]: MMC Device 2 not found
  173. [ 2.957][mmc]: mmc not find,so not exit
  174. [ 2.962]
  175. Starting kernel ...
  176.  
  177. [sun8i_fixup]: From boot, get meminfo:
  178. Start: 0x40000000
  179. Size: 2048MB
  180. ------sun8i_smp_init_ops----37-----
  181. [ 0.000000] Booting Linux on physical CPU 0
  182. [ 0.000000] Initializing cgroup subsys cpu
  183. [ 0.000000] Linux version 3.4.39 (yao@linksprite) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-11ubuntu1) ) #1 SMP PREEMPT Thu Dec 24 10:52:34 CST 2015
  184. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1feb000 s11008 r8192 d13568 u32768
  185. [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p3 init=/init
  186. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  187. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  188. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  189. [ 0.000000] Memory: 2048MB = 2048MB total
  190. [ 0.000000] Memory: 1932212k/1932212k available, 164940k reserved, 1318912K highmem
  191. [ 0.000000] Virtual kernel memory layout:
  192. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  193. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  194. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  195. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  196. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  197. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  198. [ 0.000000] .text : 0xc0008000 - 0xc09fcfb0 (10196 kB)
  199. [ 0.000000] .init : 0xc09fd000 - 0xc0bbab00 (1783 kB)
  200. [ 0.000000] .data : 0xc0bbc000 - 0xc0cfbce8 (1280 kB)
  201. [ 0.000000] .bss : 0xc0cfbdf4 - 0xc0dc67b8 ( 811 kB)
  202. [ 0.000000] Preemptible hierarchical RCU implementation.
  203. [ 0.000000] NR_IRQS:544
  204. [ 0.000000] Architected local timer running at 24.00MHz.
  205. [ 0.000000] Switching to timer-based delay loop
  206. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  207. [ 0.000000] Console: colour dummy device 80x30
  208. [ 0.000000] console [tty1] enabled
  209. [ 0.001153] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  210. [ 0.001227] pid_max: default: 32768 minimum: 301
  211. [ 0.001696] Security Framework initialized
  212. [ 0.001743] SELinux: Initializing.
  213. [ 0.002158] Mount-cache hash table entries: 512
  214. [ 0.003997] Initializing cgroup subsys debug
  215. [ 0.004045] Initializing cgroup subsys cpuacct
  216. [ 0.004077] Initializing cgroup subsys freezer
  217. [ 0.004196] CPU: Testing write buffer coherency: ok
  218. [ 0.004275] ftrace: allocating 27046 entries in 80 pages
  219. [ 0.040385] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  220. [ 0.040461] Setting up static identity map for 0x407079d0 - 0x40707a04
  221. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  222. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  223. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  224. [ 0.260110] CPU4: failed to boot: -22
  225. [ 0.300110] CPU5: failed to boot: -22
  226. [ 0.340100] CPU6: failed to boot: -22
  227. [ 0.380112] CPU7: failed to boot: -22
  228. [ 0.380355] Brought up 4 CPUs
  229. [ 0.380381] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  230. [ 0.380973] devtmpfs: initialized
  231. [ 0.393781] pinctrl core: initialized pinctrl subsystem
  232. [ 0.393781] NET: Registered protocol family 16
  233. [ 0.393781] script_sysfs_init success
  234. [ 0.393781] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  235. [ 0.395580] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  236. [ 0.400166] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  237. [ 0.402286] script config pll_video1 to 297 Mhz
  238. [ 0.402324] script config pll_ve to 432 Mhz
  239. [ 0.402348] Not Found clk pll_periph in script
  240. [ 0.402377] script config pll_gpu to 432 Mhz
  241. [ 0.402405] script config pll_hsic to 480 Mhz
  242. [ 0.402435] script config pll_de to 504 Mhz
  243. [ 0.422362] bio: create slab <bio-0> at 0
  244. [ 0.422362] [ARISC] :sunxi-arisc driver v1.70
  245. [ 0.434555] [ARISC] :arisc version: [v0.1.6]
  246. [ 0.435006] sunxi_get_soc_bin: slow chip
  247. [ 0.435441] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  248. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  249. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  250. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  251. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  252. [ 0.461715] SCSI subsystem initialized
  253. [ 0.462093] usbcore: registered new interface driver usbfs
  254. [ 0.462282] usbcore: registered new interface driver hub
  255. [ 0.462353] usbcore: registered new device driver usb
  256. [ 0.462353] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  257. [ 0.462353] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  258. [ 0.462353] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  259. [ 0.462353] Linux video capture interface: v2.00
  260. [ 0.480809] Advanced Linux Sound Architecture Driver Version 1.0.25.
  261. [ 0.481830] Bluetooth: Core ver 2.16
  262. [ 0.481945] NET: Registered protocol family 31
  263. [ 0.481971] Bluetooth: HCI device and connection manager initialized
  264. [ 0.482004] Bluetooth: HCI socket layer initialized
  265. [ 0.482030] Bluetooth: L2CAP socket layer initialized
  266. [ 0.482094] Bluetooth: SCO socket layer initialized
  267. [ 0.482666] cfg80211: Calling CRDA to update world regulatory domain
  268. [ 0.482666] Switching to clocksource arch_sys_counter
  269. [ 0.525949] FS-Cache: Loaded
  270. [ 0.526399] CacheFiles: Loaded
  271. [ 0.526427] [DISP]disp_module_init
  272. [ 0.526952] cmdline,disp=
  273. [ 0.535421] [DISP]disp_module_init finish
  274. [ 0.551333] NET: Registered protocol family 2
  275. [ 0.551833] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  276. [ 0.553550] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  277. [ 0.556037] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  278. [ 0.557640] TCP: Hash tables configured (established 131072 bind 65536)
  279. [ 0.557672] TCP: reno registered
  280. [ 0.557698] UDP hash table entries: 512 (order: 2, 16384 bytes)
  281. [ 0.557766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  282. [ 0.558517] NET: Registered protocol family 1
  283. [ 0.559515] RPC: Registered named UNIX socket transport module.
  284. [ 0.559551] RPC: Registered udp transport module.
  285. [ 0.559575] RPC: Registered tcp transport module.
  286. [ 0.559599] RPC: Registered tcp NFSv4.1 backchannel transport module.
  287. [ 1.270073] sunxi_reg_init enter
  288. [ 1.271522] audit: initializing netlink socket (disabled)
  289. [ 1.271654] type=2000 audit(1.270:1): initialized
  290. [ 1.276072] NFS: Registering the id_resolver key type
  291. [ 1.276231] FS-Cache: Netfs 'nfs' registered for caching
  292. [ 1.277209] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  293. [ 1.279979] NTFS driver 2.1.30 [Flags: R/W].
  294. [ 1.280549] fuse init (API version 7.18)
  295. [ 1.281444] msgmni has been set to 1197
  296. [ 1.285711] io scheduler noop registered
  297. [ 1.285746] io scheduler deadline registered
  298. [ 1.286005] io scheduler cfq registered (default)
  299. [ 1.286908] Console: switching to colour frame buffer device 160x45
  300. [ 1.303870] cmdline,disp=
  301. [ 1.390399] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  302. [ 1.390621] sw_uart_pm()890 - uart0 clk is already enable
  303. [ 1.390801] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  304. [ 1.580697] console [ttyS0] enabled
  305. [ 2.492449] [DISP] disp_device_attached_and_enable,line:157:attched ok, mgr0<-->device1, type=4, mode=5
  306. [ 2.500663] axp81x_dcdc1: Failed to create debugfs directory
  307. [ 2.500857] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
  308. [ 2.501427] [drm] Initialized drm 1.1.0 20060810
  309. [ 2.513791] brd: module loaded
  310. [ 2.552509] axp81x_dcdc1: Failed to create debugfs directory
  311. [ 2.564732] spi spi1: master is unqueued, this is deprecated
  312. [ 2.577007] tun: Universal TUN/TAP device driver, 1.6
  313. [ 2.588118] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  314. [ 2.602330] PPP generic driver version 2.4.2
  315. [ 2.613002] PPP BSD Compression module registered
  316. [ 2.623854] PPP Deflate Compression module registered
  317. [ 2.636840] PPP MPPE Compression module registered
  318. [ 2.647861] NET: Registered protocol family 24
  319. [ 2.658505] PPTP driver version 0.8.5
  320. [ 2.668915] usbcore: registered new interface driver rt2870
  321. [ 2.680855] usbcore: registered new interface driver asix
  322. [ 2.692457] usbcore: registered new interface driver cdc_ether
  323. [ 2.704448] usbcore: registered new interface driver smsc95xx
  324. [ 2.716250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  325. [ 2.748990] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  326. [ 2.763399] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  327. [ 2.777417] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  328. [ 2.800046] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  329. [ 2.812165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  330. [ 2.825249] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  331. [ 2.838839] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  332. [ 2.852721] usb usb1: Manufacturer: Linux 3.4.39 ehci_hcd
  333. [ 2.864254] usb usb1: SerialNumber: sunxi-ehci
  334. [ 2.875425] hub 1-0:1.0: USB hub found
  335. [ 2.885072] hub 1-0:1.0: 1 port detected
  336. [ 2.895314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  337. [ 2.927767] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  338. [ 2.941857] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  339. [ 2.955899] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  340. [ 3.024198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  341. [ 3.037452] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  342. [ 3.051216] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  343. [ 3.064947] usb usb2: Manufacturer: Linux 3.4.39 ohci_hcd
  344. [ 3.076699] usb usb2: SerialNumber: sunxi-ohci
  345. [ 3.088011] hub 2-0:1.0: USB hub found
  346. [ 3.097818] hub 2-0:1.0: 1 port detected
  347. [ 3.108379] usbcore: registered new interface driver cdc_acm
  348. [ 3.120241] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  349. [ 3.134899] usbcore: registered new interface driver usblp
  350. [ 3.146637] usbcore: registered new interface driver cdc_wdm
  351. [ 3.158266] Initializing USB Mass Storage driver...
  352. [ 3.169143] usbcore: registered new interface driver usb-storage
  353. [ 3.181173] USB Mass Storage support registered.
  354. [ 3.191730] usbcore: registered new interface driver ums-alauda
  355. [ 3.203839] usbcore: registered new interface driver ums-cypress
  356. [ 3.215917] usbcore: registered new interface driver ums-datafab
  357. [ 3.227910] usbcore: registered new interface driver ums_eneub6250
  358. [ 3.239998] usbcore: registered new interface driver ums-freecom
  359. [ 3.251794] usbcore: registered new interface driver ums-isd200
  360. [ 3.263437] usbcore: registered new interface driver ums-jumpshot
  361. [ 3.275231] usbcore: registered new interface driver ums-karma
  362. [ 3.286645] usbcore: registered new interface driver ums-onetouch
  363. [ 3.298328] usbcore: registered new interface driver ums-realtek
  364. [ 3.309838] usbcore: registered new interface driver ums-sddr09
  365. [ 3.321163] usbcore: registered new interface driver ums-sddr55
  366. [ 3.332475] usbcore: registered new interface driver ums-usbat
  367. [ 3.343852] usbcore: registered new interface driver usbserial
  368. [ 3.355082] usbcore: registered new interface driver usbserial_generic
  369. [ 3.366962] USB Serial support registered for generic
  370. [ 3.377048] usbserial: USB Serial Driver core
  371. [ 3.386392] usbcore: registered new interface driver cp210x
  372. [ 3.397120] USB Serial support registered for cp210x
  373. [ 3.407231] usbcore: registered new interface driver cypress
  374. [ 3.418078] USB Serial support registered for DeLorme Earthmate USB
  375. [ 3.429648] USB Serial support registered for HID->COM RS232 Adapter
  376. [ 3.441244] USB Serial support registered for Nokia CA-42 V2 Adapter
  377. [ 3.452752] usbcore: registered new interface driver ftdi_sio
  378. [ 3.463614] USB Serial support registered for FTDI USB Serial Device
  379. [ 3.475225] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  380. [ 3.486339] usbcore: registered new interface driver option
  381. [ 3.497117] USB Serial support registered for GSM modem (1-port)
  382. [ 3.508464] usbcore: registered new interface driver pl2303
  383. [ 3.519228] USB Serial support registered for pl2303
  384. [ 3.529330] usbcore: registered new interface driver cypress_cy7c63
  385. [ 3.541177] file system registered
  386. [ 3.551851] android_usb gadget: Mass Storage Function, version: 2009/09/11
  387. [ 3.564071] android_usb gadget: Number of LUNs=3
  388. [ 3.573674] lun0: LUN: removable file: (no medium)
  389. [ 3.583560] lun1: LUN: removable file: (no medium)
  390. [ 3.593380] lun2: LUN: removable file: (no medium)
  391. [ 3.603612] android_usb gadget: android_usb ready
  392. [ 3.613540] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  393. [ 3.624773] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  394. [ 3.638501] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  395. [ 3.650511] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  396. [ 3.662993] usb usb3: Product: sunxi_hcd host driver
  397. [ 3.672893] usb usb3: Manufacturer: Linux 3.4.39 sunxi_hcd-hcd
  398. [ 3.683760] usb usb3: SerialNumber: sunxi_hcd_host0
  399. [ 3.694185] hub 3-0:1.0: USB hub found
  400. [ 3.702741] hub 3-0:1.0: 1 port detected
  401. [ 3.713066] mousedev: PS/2 mouse device common for all mice
  402. [ 3.725764] sunxi_rtc_init(739): sunxi rtc device register!
  403. [ 3.737279] rtc_gettime(333): read time 1970-1-1 1:0:8
  404. [ 3.748015] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
  405. [ 3.760487] rtc_gettime(333): read time 1970-1-1 1:0:8
  406. [ 3.771399] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  407. [ 3.782326] sunxi_rtc_probe(699)!
  408. [ 3.791088] i2c /dev entries driver
  409. [ 3.800852] IR RC5(x) protocol handler initialized
  410. [ 3.811330] gspca_main: v2.14.0 registered
  411. [ 3.821230] usbcore: registered new interface driver uvcvideo
  412. [ 3.832928] USB Video Class driver (v1.1.1)
  413. [ 3.851535] Bluetooth: HCI UART driver ver 2.2
  414. [ 3.861830] Bluetooth: HCI H4 protocol initialized
  415. [ 3.873044] [cpu_freq] ERR: Can not get cluster0_power from sys_config, use default[vdd-cpua] for cluster0
  416. [ 3.889361] [cpu_freq] ERR: Can not get cluster0_power from sys_config, use default[vdd-cpub] for cluster1
  417. [ 3.905826] sunxi_get_soc_bin: slow chip
  418. [ 3.923550] usbcore: registered new interface driver usbhid
  419. [ 3.932845] usbhid: USB HID core driver
  420. [ 3.940184] zram: num_devices not specified. Using default: 1
  421. [ 3.949691] zram: Creating 1 devices ...
  422. [ 3.958319] usbcore: registered new interface driver snd-usb-audio
  423. [ 3.971136] request gpio failed!
  424. [ 3.977847] *******************Try sdio*******************
  425. [ 3.990477] *******************Try sd *******************
  426. [ 3.993003] asoc: ac100-aif1 <-> pri_dai mapping ok
  427. [ 3.993377] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  428. [ 3.996351] asoc: ac100-aif1 <-> sec_dai mapping ok
  429. [ 3.996623] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
  430. [ 3.996905] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  431. [ 4.003910] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  432. [ 4.051975] u32 classifier
  433. [ 4.057831] Actions configured
  434. [ 4.064502] Netfilter messages via NETLINK v0.30.
  435. [ 4.072746] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  436. [ 4.083225] ctnetlink v0.93: registering with nfnetlink.
  437. [ 4.093437] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  438. [ 4.104204] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  439. [ 4.114127] xt_time: kernel timezone is -0000
  440. [ 4.122086] IPv4 over IPv4 tunneling driver
  441. [ 4.126177] mmc0: new high speed SDHC card at address e624
  442. [ 4.126702] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  443. [ 4.128174] mmcblk0: p1 p2 p3
  444. [ 4.129068] *******************sd init ok*******************
  445. [ 4.162590] gre: GRE over IPv4 demultiplexor driver
  446. [ 4.170992] ip_gre: GRE over IPv4 tunneling driver
  447. [ 4.180204] ip_tables: (C) 2000-2006 Netfilter Core Team
  448. [ 4.189451] arp_tables: (C) 2002 David S. Miller
  449. [ 4.197630] TCP: cubic registered
  450. [ 4.204186] Initializing XFRM netlink socket
  451. [ 4.212313] NET: Registered protocol family 10
  452. [ 4.221988] Mobile IPv6
  453. [ 4.227619] ip6_tables: (C) 2000-2006 Netfilter Core Team
  454. [ 4.236950] IPv6 over IPv4 tunneling driver
  455. [ 4.245953] NET: Registered protocol family 17
  456. [ 4.253831] NET: Registered protocol family 15
  457. [ 4.261811] Bluetooth: RFCOMM TTY layer initialized
  458. [ 4.270091] Bluetooth: RFCOMM socket layer initialized
  459. [ 4.278621] Bluetooth: RFCOMM ver 1.11
  460. [ 4.285511] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  461. [ 4.294210] Bluetooth: BNEP filters: protocol multicast
  462. [ 4.302720] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  463. [ 4.312176] Registering the dns_resolver key type
  464. [ 4.320303] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  465. [ 4.331601] ThumbEE CPU extension supported.
  466. [ 4.339087] Registering SWP/SWPB emulation handler
  467. [ 4.348931] rtc_gettime(333): read time 1970-1-1 1:0:8
  468. [ 4.357439] rtc0 rtc0: setting system clock to 1970-01-01 01:00:08 UTC (3608)
  469. [ 4.369199] sunxi_get_soc_bin: slow chip
  470. [ 4.376940] CPU Budget:Register notifier
  471. [ 4.384087] CPU Budget:register Success
  472. [ 4.391124] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  473. [ 4.411600] ALSA device list:
  474. [ 4.417836] #0: snddaudio
  475. [ 4.423876] #1: sndhdmi
  476. [ 4.432118] Freeing init memory: 1780K
  477. [ 4.955425] android_usb: already disabled
  478. [ 4.963132] rndis_function_bind_config MAC: 00:00:00:00:00:00
  479. [ 4.972530] android_usb gadget: using random self ethernet address
  480. [ 4.982326] android_usb gadget: using random host ethernet address
  481. [ 4.992878] usb0: MAC 66:c4:b0:d9:b6:50
  482. [ 4.999948] usb0: HOST MAC 12:77:eb:4a:7d:0b
  483. [ 5.058349] EXT4-fs (mmcblk0p3): barriers disabled
  484. [ 5.075595] EXT4-fs (mmcblk0p3): mounted filesystem with writeback data mode. Opts: noauto_da_alloc,barrier=0,data=writeback
  485. [ 5.561786] init: plymouth-upstart-bridge main process (158) terminated with status 1
  486. [ 5.573924] init: plymouth-upstart-bridge main process ended, respawning
  487. [ 5.621010] init: plymouth-upstart-bridge main process (168) terminated with status 1
  488. [ 5.632980] init: plymouth-upstart-bridge main process ended, respawning
  489. [ 5.645042] init: ureadahead main process (161) terminated with status 5
  490. [ 5.690766] init: plymouth-upstart-bridge main process (171) terminated with status 1
  491. [ 5.702775] init: plymouth-upstart-bridge main process ended, respawning
  492. [ 7.134964] systemd-udevd[349]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  493. [ 7.139264] systemd-udevd[354]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  494. [ 7.140336] systemd-udevd[344]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  495. [ 7.142704] systemd-udevd[346]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  496. [ 7.152987] systemd-udevd[342]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  497. * Stopping Send an event to indicate plymouth is up[ OK ]
  498. * Starting Mount filesystems on boot[ OK ]
  499. * Starting Signal sysvinit that the rootfs is mounted[ OK ]
  500. * Starting Populate /dev filesystem[ OK ]
  501. * Stopping Populate /dev filesystem[ OK ]
  502. * Starting Clean /tmp directory[ OK ]
  503. * Starting Populate and link to /run filesystem[ OK ]
  504. * Stopping Clean /tmp directory[ OK ]
  505. * Stopping Populate and link to /run filesystem[ OK ]
  506. * Stopping Track if upstart is running in a container[ OK ]
  507. * Starting Initialize or finalize resolvconf[ OK ]
  508. * Starting set console keymap[ OK ]
  509. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  510. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  511. * Starting Bridge udev events into upstart[ OK ]
  512. * Stopping set console keymap[ OK ]
  513. * Starting Signal sysvinit that local filesystems are mounted[ OK ]
  514. * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
  515. * Starting device node and kernel event manager[ OK ]
  516. * Starting flush early job output to logs[ OK ]
  517. * Starting pcDuino init scripts[ OK ]
  518. * Starting D-Bus system message bus[ OK ]
  519. * Stopping Mount filesystems on boot[ OK ]
  520. * Stopping flush early job output to logs[ OK ]
  521. * Starting load modules from /etc/modules[ OK ]
  522. * Starting cold plug devices[ OK ]
  523. * Starting log initial device creation[ OK ]
  524. * Stopping load modules from /etc/modules[ OK ]
  525. * Starting SystemD login management service[ OK ]
  526. * Starting bluetooth daemon[ OK ]
  527. * Starting system logging daemon[ OK ]
  528. * Starting set console font[ OK ]
  529. * Stopping set console font[ OK ]
  530. * Starting userspace bootsplash[ OK ]
  531. * Starting mDNS/DNS-SD daemon[ OK ]
  532. * Starting Send an event to indicate plymouth is up[ OK ]
  533. * Stopping userspace bootsplash[ OK ]
  534. * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  535. * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[fail]
  536. * Stopping Send an event to indicate plymouth is up[ OK ]
  537. * Starting configure network device security[ OK ]
  538. * Starting configure network device security[ OK ]
  539. * Starting configure network device security[ OK ]
  540. * Starting configure network device security[ OK ]
  541. * Starting configure network device security[ OK ]
  542. * Starting configure network device[ OK ]
  543. * Starting configure network device security[ OK ]
  544. * Starting configure network device[ OK ]
  545. * Starting configure network device[ OK ]
  546. * Starting configure network device[ OK ]
  547. * Starting Mount network filesystems[ OK ]
  548. * Starting Failsafe Boot Delay[ OK ]
  549. * Starting configure network device security[ OK ]
  550. * Starting configure network device[ OK ]
  551. * Starting configure network device[ OK ]
  552. * Stopping cold plug devices[ OK ]
  553. * Stopping log initial device creation[ OK ]
  554. * Starting configure network device security[ OK ]
  555. * Starting configure network device[ OK ]
  556. * Stopping Failsafe Boot Delay[ OK ]
  557. * Starting System V initialisation compatibility[ OK ]
  558. * Starting modem connection manager[ OK ]
  559. * Starting configure network device security[ OK ]
  560. * Stopping Mount network filesystems[ OK ]
  561. [ OK ]ting up X socket directories...
  562. * Starting configure virtual network devices[ OK ]
  563. * Stopping System V initialisation compatibility[ OK ]
  564.  
  565. Welcome to Linaro 14.04 (GNU/Linux 3.4.39 armv7l)
  566.  
  567. * Documentation: https://wiki.linaro.org/
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!