Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.648460] PPP generic driver version 2.4.2
- [ 0.648484] tun: Universal TUN/TAP device driver, 1.6
- [ 0.648485] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.648531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.648599] alloc irq_desc for 17 on node 0
- [ 0.648602] alloc kstat_irqs on node 0
- [ 0.648612] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.648644] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 0.648713] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 0.648757] ehci_hcd 0000:00:12.2: debug port 1
- [ 0.648784] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
- [ 0.668127] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.668241] hub 1-0:1.0: USB hub found
- [ 0.668244] hub 1-0:1.0: 6 ports detected
- [ 0.668370] alloc irq_desc for 19 on node 0
- [ 0.668372] alloc kstat_irqs on node 0
- [ 0.668381] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.668399] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 0.668427] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 0.668451] ehci_hcd 0000:00:13.2: debug port 1
- [ 0.668478] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
- [ 0.688127] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.688234] hub 2-0:1.0: USB hub found
- [ 0.688237] hub 2-0:1.0: 6 ports detected
- [ 0.688335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.688401] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.688422] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.688456] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 0.688489] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
- [ 0.752236] hub 3-0:1.0: USB hub found
- [ 0.752243] hub 3-0:1.0: 3 ports detected
- [ 0.752370] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.752389] ohci_hcd 0000:00:12.1: OHCI Host Controller
- [ 0.752421] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- [ 0.752438] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
- [ 0.812222] hub 4-0:1.0: USB hub found
- [ 0.812228] hub 4-0:1.0: 3 ports detected
- [ 0.812353] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.812374] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.812401] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 0.812434] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
- [ 0.872225] hub 5-0:1.0: USB hub found
- [ 0.872233] hub 5-0:1.0: 3 ports detected
- [ 0.872356] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.872376] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 0.872403] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- [ 0.872420] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
- [ 0.932214] hub 6-0:1.0: USB hub found
- [ 0.932220] hub 6-0:1.0: 3 ports detected
- [ 0.932346] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.932367] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 0.932398] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- [ 0.932414] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
- [ 0.992206] hub 7-0:1.0: USB hub found
- [ 0.992213] hub 7-0:1.0: 2 ports detected
- [ 0.992306] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.992398] PNP: No PS/2 controller found. Probing ports directly.
- [ 1.026319] Failed to disable AUX port, but continuing anyway... Is this a SiS?
- [ 1.026320] If AUX port is really absent please use the 'i8042.noaux' option.
- [ 1.028090] usb 1-2: new high speed USB device using ehci_hcd and address 2
- [ 1.250154] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.250251] mice: PS/2 mouse device common for all mice
- [ 1.250340] rtc_cmos 00:05: RTC can wake from S4
- [ 1.250368] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 1.250397] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 1.250477] device-mapper: uevent: version 1.0.3
- [ 1.250554] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- [ 1.250640] device-mapper: multipath: version 1.1.1 loaded
- [ 1.250643] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.250819] cpuidle: using governor ladder
- [ 1.250821] cpuidle: using governor menu
- [ 1.251000] TCP cubic registered
- [ 1.251077] NET: Registered protocol family 10
- [ 1.251338] lo: Disabled Privacy Extensions
- [ 1.251466] NET: Registered protocol family 17
- [ 1.251496] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
- [ 1.251529] powernow-k8: 0 : pstate 0 (3000 MHz)
- [ 1.251530] powernow-k8: 1 : pstate 1 (2300 MHz)
- [ 1.251531] powernow-k8: 2 : pstate 2 (1800 MHz)
- [ 1.251532] powernow-k8: 3 : pstate 3 (800 MHz)
- [ 1.251695] PM: Resume from disk failed.
- [ 1.251703] registered taskstats version 1
- [ 1.251956] Magic number: 11:707:994
- [ 1.252033] rtc_cmos 00:05: setting system clock to 2011-01-08 16:58:16 UTC (1294505896)
- [ 1.252035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.252036] EDD information not available.
- [ 1.252085] Freeing unused kernel memory: 908k freed
- [ 1.252297] Write protecting the kernel read-only data: 10240k
- [ 1.252412] Freeing unused kernel memory: 412k freed
- [ 1.252615] Freeing unused kernel memory: 1644k freed
- [ 1.269079] udev[114]: starting version 163
- [ 1.348934] scsi0 : pata_atiixp
- [ 1.353182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.353202] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.353251] r8169 0000:03:00.0: setting latency timer to 64
- [ 1.353281] alloc irq_desc for 43 on node 0
- [ 1.353283] alloc kstat_irqs on node 0
- [ 1.353293] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
- [ 1.353692] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc900110f0000, 1c:6f:65:48:de:08, XID 1c4000c0 IRQ 43
- [ 1.356997] scsi1 : pata_atiixp
- [ 1.357789] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
- [ 1.357791] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
- [ 1.357821] alloc irq_desc for 22 on node 0
- [ 1.357822] alloc kstat_irqs on node 0
- [ 1.357830] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.359506] ahci 0000:00:11.0: version 3.0
- [ 1.359520] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.359625] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 1.359628] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 1.359868] scsi2 : ahci
- [ 1.359927] scsi3 : ahci
- [ 1.359968] scsi4 : ahci
- [ 1.360142] scsi5 : ahci
- [ 1.360236] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
- [ 1.360239] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
- [ 1.360242] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
- [ 1.360245] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
- [ 1.420112] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
- [ 1.541035] ata2.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133
- [ 1.580086] usb 4-2: new low speed USB device using ohci_hcd and address 2
- [ 1.580428] ata2.00: configured for UDMA/100
- [ 1.595161] scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5
- [ 1.623267] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.623271] Uniform CD-ROM driver Revision: 3.20
- [ 1.623371] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.623417] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 1.690083] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.700077] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.700106] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.813420] usbcore: registered new interface driver hiddev
- [ 1.813597] usbcore: registered new interface driver usbhid
- [ 1.813599] usbhid: USB HID core driver
- [ 1.900079] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.910761] firewire_core: created device fw0: GUID 0012ac0f001c6f65, S400
- [ 1.927108] ata6.00: ATA-8: ST3500418AS, CC34, max UDMA/133
- [ 1.927111] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 1.966649] ata6.00: configured for UDMA/133
- [ 1.980210] scsi 5:0:0:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
- [ 1.980342] sd 5:0:0:0: Attached scsi generic sg1 type 0
- [ 1.980359] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.980404] sd 5:0:0:0: [sda] Write Protect is off
- [ 1.980406] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.980440] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.980675] sda: sda1 sda2 < sda5 >
- [ 2.019824] sd 5:0:0:0: [sda] Attached SCSI disk
- [ 2.027317] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
- [ 2.027384] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:12.1-2/input0
- [ 2.044146] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
- [ 2.057275] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input3
- [ 2.057363] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:12.1-2/input1
- [ 2.296898] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.915404] udev[454]: starting version 163
- [ 10.004007] Adding 11872252k swap on /dev/sda5. Priority:-1 extents:1 across:11872252k
- [ 10.073963] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit pref disabled]
- [ 10.073967] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 10.122630] lp: driver loaded but no devices found
- [ 10.140102] saa7164 driver loaded
- [ 10.140185] Linux video capture interface: v2.00
- [ 10.146824] EDAC MC: Ver: 2.1.0 Dec 2 2010
- [ 10.147563] type=1400 audit(1294505905.383:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=678 comm="apparmor_parser"
- [ 10.147859] type=1400 audit(1294505905.383:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
- [ 10.147969] type=1400 audit(1294505905.383:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
- [ 10.159647] saa7164 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 10.160319] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
- [ 10.160324] saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfd800000
- [ 10.160329] saa7164 0000:02:00.0: setting latency timer to 64
- [ 10.161592] type=1400 audit(1294505905.403:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=773 comm="apparmor_parser"
- [ 10.163518] [drm] Initialized drm 1.1.0 20060810
- [ 10.173818] type=1400 audit(1294505905.413:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=774 comm="apparmor_parser"
- [ 10.174016] type=1400 audit(1294505905.413:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=774 comm="apparmor_parser"
- [ 10.174126] type=1400 audit(1294505905.413:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=774 comm="apparmor_parser"
- [ 10.174158] au0828 driver loaded
- [ 10.174264] parport_pc 00:09: reported by Plug and Play ACPI
- [ 10.174318] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 10.177326] cx18: Start initialization, version 1.4.0
- [ 10.181582] type=1400 audit(1294505905.423:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=784 comm="apparmor_parser"
- [ 10.188822] cx18-0: Initializing card 0
- [ 10.188826] cx18-0: Autodetected Hauppauge card
- [ 10.200297] EDAC amd64_edac: Ver: 3.3.0 Dec 2 2010
- [ 10.210073] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
- [ 10.210082] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 10.210083] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 10.210084] (Note that use of the override may cause unknown side effects.)
- [ 10.210100] amd64_edac: probe of 0000:00:18.2 failed with error -22
- [ 10.215706] ppdev: user-space parallel port driver
- [ 10.228343] alloc irq_desc for 21 on node 0
- [ 10.228346] alloc kstat_irqs on node 0
- [ 10.228357] cx18 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 10.228367] cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
- [ 10.232915] cx18-0: cx23418 revision 01010000 (B)
- [ 10.246902] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 10.246908] nouveau 0000:01:00.0: setting latency timer to 64
- [ 10.260621] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0c1080a1
- [ 10.260742] nouveau 0000:01:00.0: PCI INT A disabled
- [ 10.260760] nouveau: probe of 0000:01:00.0 failed with error -22
- [ 10.270843] lp0: using parport0 (interrupt-driven).
- [ 10.271978] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 10.284488] nvidia: module license 'NVIDIA' taints kernel.
- [ 10.284491] Disabling lock debugging due to kernel taint
- [ 10.434119] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 10.520324] Registering the dns_resolver key type
- [ 10.520332] Slow work thread pool: Starting up
- [ 10.520367] Slow work thread pool: Ready
- [ 10.522408] CIFS VFS: Error connecting to socket. Aborting operation
- [ 10.522466] CIFS VFS: cifs_mount failed w/return code = -101
- [ 10.536210] type=1400 audit(1294505905.773:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=997 comm="apparmor_parser"
- [ 10.537755] type=1400 audit(1294505905.773:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=998 comm="apparmor_parser"
- [ 10.540720] au0828: i2c bus registered
- [ 10.617885] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 10.617893] nvidia 0000:01:00.0: setting latency timer to 64
- [ 10.617897] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 10.618066] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.29 Wed Dec 8 12:08:56 PST 2010
- [ 10.634223] r8169 0000:03:00.0: eth0: link up
- [ 10.634233] r8169 0000:03:00.0: eth0: link up
- [ 10.695963] saa7164_downloadfirmware() no first image
- [ 10.696023] saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.3.fw)
- [ 10.728345] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 10.728348] hda_intel: Disable MSI for Nvidia chipset
- [ 10.728391] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 10.820650] tveeprom 1-0050: Hauppauge model 74351, rev F1F5, serial# 7367012
- [ 10.820653] tveeprom 1-0050: MAC address is 00:0d:fe:70:69:64
- [ 10.820655] tveeprom 1-0050: tuner model is NXP 18271C2 (idx 155, type 54)
- [ 10.820658] tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
- [ 10.820660] tveeprom 1-0050: audio processor is CX23418 (idx 38)
- [ 10.820662] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
- [ 10.820663] tveeprom 1-0050: has no radio
- [ 10.820664] cx18-0: Autodetected Hauppauge HVR-1600
- [ 10.820666] cx18-0: Simultaneous Digital and Analog TV capture supported
- [ 10.871792] saa7164_downloadfirmware() firmware read 3978608 bytes.
- [ 10.871795] saa7164_downloadfirmware() firmware loaded.
- [ 10.871796] Firmware file header part 1:
- [ 10.871798] .FirmwareSize = 0x0
- [ 10.871799] .BSLSize = 0x0
- [ 10.871800] .Reserved = 0x3cb57
- [ 10.871800] .Version = 0x3
- [ 10.871801] saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608
- [ 10.871807] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
- [ 10.871808] saa7164_downloadfirmware() BSLSize = 0x0
- [ 10.871809] saa7164_downloadfirmware() Reserved = 0x0
- [ 10.871810] saa7164_downloadfirmware() Version = 0x51cc1
- [ 10.943038] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
- [ 10.947717] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
- [ 10.947719] DVB: registering new adapter (cx18)
- [ 10.950715] cx18-0: frontend initialization failed
- [ 10.950873] cx18-0: DVB failed to register
- [ 10.950955] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
- [ 10.950972] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
- [ 10.950991] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
- [ 10.951298] cx18-0: Error -1 registering devices
- [ 10.954013] cx18-0: Error -1 on initialization
- [ 10.954083] cx18: probe of 0000:04:07.0 failed with error -1
- [ 10.954102] cx18: End initialization
- [ 11.028167] tveeprom 0-0050: Hauppauge model 72001, rev B3F0, serial# 4768233
- [ 11.028169] tveeprom 0-0050: MAC address is 00:0d:fe:48:c1:e9
- [ 11.028171] tveeprom 0-0050: tuner model is Xceive XC5000 (idx 150, type 76)
- [ 11.028173] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
- [ 11.028175] tveeprom 0-0050: audio processor is AU8522 (idx 44)
- [ 11.028177] tveeprom 0-0050: decoder processor is AU8522 (idx 42)
- [ 11.028178] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
- [ 11.028180] hauppauge_eeprom: hauppauge eeprom: model=72001
- [ 11.029791] au8522 0-0047: creating new instance
- [ 11.029793] au8522_decoder creating new instance...
- [ 11.033664] tuner 0-0061: chip found @ 0xc2 (au0828)
- [ 11.035080] xc5000: xc5000_attach(0-0061)
- [ 11.035083] xc5000 0-0061: creating new instance
- [ 11.041287] xc5000: Successfully identified at address 0x61
- [ 11.041289] xc5000: Firmware has not been loaded previously
- [ 11.041575] au8522 0-0047: attaching existing instance
- [ 11.049092] xc5000: xc5000_attach(0-0061)
- [ 11.049095] xc5000 0-0061: attaching existing instance
- [ 11.055153] xc5000: Successfully identified at address 0x61
- [ 11.055155] xc5000: Firmware has not been loaded previously
- [ 11.055158] DVB: registering new adapter (au0828)
- [ 11.055161] DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)...
- [ 11.056698] Registered device AU0828 [Hauppauge HVR950Q]
- [ 11.152406] xc5000: xc5000_sleep()
- [ 11.158908] 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
- [ 11.159179] usbcore: registered new interface driver snd-usb-audio
- [ 11.159582] usbcore: registered new interface driver au0828
- [ 12.067769] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 18.000056] saa7164_downloadimage() Image downloaded, booting...
- [ 18.110064] saa7164_downloadimage() Image booted successfully.
- [ 18.110079] starting firmware download(2)
- [ 20.460059] saa7164_downloadimage() Image downloaded, booting...
- [ 21.130673] eth0: no IPv6 routers present
- [ 21.890060] saa7164_downloadimage() Image booted successfully.
- [ 21.890075] firmware download complete.
- [ 21.930549] tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# 7232212
- [ 21.930552] tveeprom 1-0000: MAC address is 00:0d:fe:6e:5a:d4
- [ 21.930554] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
- [ 21.930556] tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
- [ 21.930558] tveeprom 1-0000: audio processor is SAA7164 (idx 43)
- [ 21.930560] tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
- [ 21.930561] tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter
- [ 21.930563] saa7164[0]: Hauppauge eeprom: model=88061
- [ 22.275384] tda18271 2-0060: creating new instance
- [ 22.279925] TDA18271HD/C2 detected @ 2-0060
- [ 22.624723] DVB: registering new adapter (saa7164)
- [ 22.624728] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
- [ 22.907822] tda18271 3-0060: creating new instance
- [ 22.911904] TDA18271HD/C2 detected @ 3-0060
- [ 23.264519] tda18271: performing RF tracking filter calibration
- [ 25.918003] tda18271: RF tracking filter calibration complete
- [ 25.918130] DVB: registering new adapter (saa7164)
- [ 25.918133] DVB: registering adapter 2 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
- [ 25.943244] audit_printk_skb: 36 callbacks suppressed
- [ 25.943248] type=1400 audit(1294505921.186:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1629 comm="apparmor_parser"
- [ 25.943501] type=1400 audit(1294505921.186:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1629 comm="apparmor_parser"
- [ 26.843460] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
- [ 26.868270] HDMI hot plug event: Pin=5 Presence_Detect=0 ELD_Valid=1
- [ 28.800659] HDMI: detected monitor SONY AVAMP
- [ 28.800661] at connection type HDMI
- [ 28.800664] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC
- [ 28.800668] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200 176400 192000, bits = 16 20
- [ 28.800670] HDMI: supports coding type AC-3: channels = 6, rates = 44100 48000 88200, max bitrate = 680000
- [ 28.800673] HDMI: supports coding type DTS: channels = 6, rates = 44100 48000 88200 176400 192000, max bitrate = 1536000
- [ 28.984556] xc5000: xc5000_init()
- [ 28.994054] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
- [ 28.994057] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
- [ 29.088577] xc5000: firmware read 12401 bytes.
- [ 29.088579] xc5000: firmware uploading...
- [ 29.088581] xc5000: xc5000_TunerReset()
- [ 29.249715] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 29.390154] 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
- [ 29.416520] 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
- [ 29.440122] 2:2:1: endpoint lacks sample rate attribute bit, cannot set.
- [ 30.055859] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
- [ 36.211489] xc5000: firmware upload complete...
- [ 36.211502] xc5000: xc_initialize()
- [ 36.506066] xc5000: *** ADC envelope (0-1023) = 0
- [ 36.512062] xc5000: *** Frequency error = 0 Hz
- [ 36.518052] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 0
- [ 36.530053] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 36.536039] xc5000: *** Horizontal sync frequency = 15443 Hz
- [ 36.542040] xc5000: *** Frame lines = 144
- [ 36.548031] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 36.838446] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 36.838450] xc5000: xc5000_set_params() frequency=683000000 (Hz)
- [ 36.838451] xc5000: xc5000_set_params() ATSC
- [ 36.838452] xc5000: xc5000_set_params() VSB modulation
- [ 36.838454] xc5000: xc5000_set_params() frequency=681250000 (compensated)
- [ 36.838455] xc5000: xc_SetSignalSource(0) Source = ANTENNA
- [ 36.848064] xc5000: xc_SetTVStandard(0x8002,0x00c0)
- [ 36.848067] xc5000: xc_SetTVStandard() Standard = DTV6
- [ 36.867551] xc5000: xc_set_IF_frequency(freq_khz = 6000) freq_code = 0x1800
- [ 36.877293] xc5000: xc_tune_channel(681250000)
- [ 36.877295] xc5000: xc_set_RF_frequency(681250000)
- [ 37.115992] xc5000: *** ADC envelope (0-1023) = 848
- [ 37.122114] xc5000: *** Frequency error = 0 Hz
- [ 37.128105] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 37.140127] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 37.146221] xc5000: *** Horizontal sync frequency = 15694 Hz
- [ 37.152214] xc5000: *** Frame lines = 577
- [ 37.158207] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 37.398409] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 37.398412] xc5000: xc5000_set_params() frequency=635000000 (Hz)
- [ 37.398414] xc5000: xc5000_set_params() ATSC
- [ 37.398415] xc5000: xc5000_set_params() VSB modulation
- [ 37.398416] xc5000: xc5000_set_params() frequency=633250000 (compensated)
- [ 37.398418] xc5000: xc_SetSignalSource(0) Source = ANTENNA
- [ 37.408153] xc5000: xc_SetTVStandard(0x8002,0x00c0)
- [ 37.408155] xc5000: xc_SetTVStandard() Standard = DTV6
- [ 37.427638] xc5000: xc_set_IF_frequency(freq_khz = 6000) freq_code = 0x1800
- [ 37.437382] xc5000: xc_tune_channel(633250000)
- [ 37.437384] xc5000: xc_set_RF_frequency(633250000)
- [ 37.676082] xc5000: *** ADC envelope (0-1023) = 872
- [ 37.682077] xc5000: *** Frequency error = 0 Hz
- [ 37.688068] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 37.700064] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 37.706057] xc5000: *** Horizontal sync frequency = 15542 Hz
- [ 37.712052] xc5000: *** Frame lines = 65535
- [ 37.718046] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 38.023444] tda18271: performing RF tracking filter calibration
- [ 38.722437] xc5000: xc5000_sleep()
- [ 40.657769] tda18271: RF tracking filter calibration complete
- [ 1131.933125] xc5000: xc5000_init()
- [ 1131.939152] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 1131.939160] xc5000: xc_initialize()
- [ 1132.206110] xc5000: *** ADC envelope (0-1023) = 0
- [ 1132.212129] xc5000: *** Frequency error = 0 Hz
- [ 1132.218131] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 1132.230250] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 1132.236245] xc5000: *** Horizontal sync frequency = 221 Hz
- [ 1132.242247] xc5000: *** Frame lines = 1479
- [ 1132.248258] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 1132.608502] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 1132.608512] xc5000: xc5000_set_params() frequency=635000000 (Hz)
- [ 1132.608517] xc5000: xc5000_set_params() ATSC
- [ 1132.608522] xc5000: xc5000_set_params() VSB modulation
- [ 1132.608526] xc5000: xc5000_set_params() frequency=633250000 (compensated)
- [ 1132.608532] xc5000: xc_SetSignalSource(0) Source = ANTENNA
- [ 1132.618239] xc5000: xc_SetTVStandard(0x8002,0x00c0)
- [ 1132.618246] xc5000: xc_SetTVStandard() Standard = DTV6
- [ 1132.637761] xc5000: xc_set_IF_frequency(freq_khz = 6000) freq_code = 0x1800
- [ 1132.647516] xc5000: xc_tune_channel(633250000)
- [ 1132.647523] xc5000: xc_set_RF_frequency(633250000)
- [ 1132.866077] xc5000: *** ADC envelope (0-1023) = 848
- [ 1132.872079] xc5000: *** Frequency error = 0 Hz
- [ 1132.878071] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 1132.890219] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 1132.896375] xc5000: *** Horizontal sync frequency = 15740 Hz
- [ 1132.902468] xc5000: *** Frame lines = 65535
- [ 1132.908468] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 1158.522485] xc5000: xc5000_sleep()
- [ 1222.993241] xc5000: xc5000_init()
- [ 1222.999245] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 1222.999253] xc5000: xc_initialize()
- [ 1223.276173] xc5000: *** ADC envelope (0-1023) = 0
- [ 1223.282172] xc5000: *** Frequency error = 0 Hz
- [ 1223.288161] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 1223.300427] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 1223.306554] xc5000: *** Horizontal sync frequency = 793 Hz
- [ 1223.312677] xc5000: *** Frame lines = 438
- [ 1223.318678] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 1223.659116] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
- [ 1223.659125] xc5000: xc5000_set_params() frequency=635000000 (Hz)
- [ 1223.659131] xc5000: xc5000_set_params() ATSC
- [ 1223.659135] xc5000: xc5000_set_params() VSB modulation
- [ 1223.659140] xc5000: xc5000_set_params() frequency=633250000 (compensated)
- [ 1223.659145] xc5000: xc_SetSignalSource(0) Source = ANTENNA
- [ 1223.668866] xc5000: xc_SetTVStandard(0x8002,0x00c0)
- [ 1223.668874] xc5000: xc_SetTVStandard() Standard = DTV6
- [ 1223.688353] xc5000: xc_set_IF_frequency(freq_khz = 6000) freq_code = 0x1800
- [ 1223.698120] xc5000: xc_tune_channel(633250000)
- [ 1223.698127] xc5000: xc_set_RF_frequency(633250000)
- [ 1223.916160] xc5000: *** ADC envelope (0-1023) = 856
- [ 1223.922154] xc5000: *** Frequency error = 0 Hz
- [ 1223.928152] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
- [ 1223.940291] xc5000: *** HW: V03.02, FW: V01.06.0072
- [ 1223.946415] xc5000: *** Horizontal sync frequency = 15679 Hz
- [ 1223.952538] xc5000: *** Frame lines = 565
- [ 1223.958541] xc5000: *** Quality (0:<8dB, 7:>56dB) = 32895
- [ 1249.453243] xc5000: xc5000_sleep()
- brent@mythtvmain:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement