API tools faq
paste
Advertisement
backstander

"ifconfig" and "dmesg"

backstander
Aug 22nd, 2016
58
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.38 KB | None | 0 0
raw download clone embed print report
  1. eth0 Link encap:Ethernet HWaddr ##:##:##:##:##:##
  2. inet addr:169.254.244.23 Bcast:169.254.255.255 Mask:255.255.0.0
  3. inet6 addr: fe80::a032:65cd:4520:b9d9/64 Scope:Link
  4. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  5. RX packets:900 errors:0 dropped:0 overruns:0 frame:0
  6. TX packets:138 errors:0 dropped:0 overruns:0 carrier:0
  7. collisions:0 txqueuelen:1000
  8. RX bytes:55710 (54.4 KiB) TX bytes:35518 (34.6 KiB)
  9.  
  10. lo Link encap:Local Loopback
  11. inet addr:127.0.0.1 Mask:255.0.0.0
  12. inet6 addr: ::1/128 Scope:Host
  13. UP LOOPBACK RUNNING MTU:65536 Metric:1
  14. RX packets:148 errors:0 dropped:0 overruns:0 frame:0
  15. TX packets:148 errors:0 dropped:0 overruns:0 carrier:0
  16. collisions:0 txqueuelen:1
  17. RX bytes:12192 (11.9 KiB) TX bytes:12192 (11.9 KiB)
  18.  
  19. wlan0 Link encap:Ethernet HWaddr ##:##:##:##:##:##
  20. UP BROADCAST MULTICAST MTU:1500 Metric:1
  21. RX packets:1495 errors:0 dropped:23 overruns:0 frame:0
  22. TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
  23. collisions:0 txqueuelen:1000
  24. RX bytes:101048 (98.6 KiB) TX bytes:179092 (174.8 KiB)
  25.  
  26.  
  27. [ 0.000000] Booting Linux on physical CPU 0x0
  28. [ 0.000000] Initializing cgroup subsys cpuset
  29. [ 0.000000] Initializing cgroup subsys cpu
  30. [ 0.000000] Initializing cgroup subsys cpuacct
  31. [ 0.000000] Linux version 4.4.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #894 SMP Mon Jun 13 13:13:27 BST 2016
  32. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  33. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  34. [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
  35. [ 0.000000] cma: Reserved 8 MiB at 0x2e400000
  36. [ 0.000000] Memory policy: Data cache writealloc
  37. [ 0.000000] On node 0 totalpages: 192512
  38. [ 0.000000] free_area_init_node: node 0, pgdat 808c0e00, node_mem_map add64000
  39. [ 0.000000] Normal zone: 1692 pages used for memmap
  40. [ 0.000000] Normal zone: 0 pages reserved
  41. [ 0.000000] Normal zone: 192512 pages, LIFO batch:31
  42. [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
  43. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  44. [ 0.000000] PERCPU: Embedded 13 pages/cpu @aefaa000 s22592 r8192 d22464 u53248
  45. [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
  46. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  47. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820
  48. [ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2709.boardrev=0xa02082 bcm2709.serial=0xbaa0b83c smsc95xx.macaddr=B8:27:EB:A0:B8:3C bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 consoleblank=0
  49. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  50. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  51. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  52. [ 0.000000] Memory: 744204K/770048K available (6344K kernel code, 432K rwdata, 1712K rodata, 476K init, 764K bss, 17652K reserved, 8192K cma-reserved)
  53. [ 0.000000] Virtual kernel memory layout:
  54. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  55. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  56. vmalloc : 0xaf800000 - 0xff800000 (1280 MB)
  57. lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
  58. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  59. .text : 0x80008000 - 0x807e6470 (8058 kB)
  60. .init : 0x807e7000 - 0x8085e000 ( 476 kB)
  61. .data : 0x8085e000 - 0x808ca108 ( 433 kB)
  62. .bss : 0x808cd000 - 0x8098c1ac ( 765 kB)
  63. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  64. [ 0.000000] Hierarchical RCU implementation.
  65. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  66. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  67. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  68. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  69. [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  70. [ 0.000025] Switching to timer-based delay loop, resolution 52ns
  71. [ 0.000278] Console: colour dummy device 80x30
  72. [ 0.000476] console [tty1] enabled
  73. [ 0.000499] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  74. [ 0.000520] pid_max: default: 32768 minimum: 301
  75. [ 0.000833] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  76. [ 0.000847] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  77. [ 0.001784] Disabling cpuset control group subsystem
  78. [ 0.001816] Initializing cgroup subsys io
  79. [ 0.001844] Initializing cgroup subsys memory
  80. [ 0.001881] Initializing cgroup subsys devices
  81. [ 0.001902] Initializing cgroup subsys freezer
  82. [ 0.001921] Initializing cgroup subsys net_cls
  83. [ 0.001969] CPU: Testing write buffer coherency: ok
  84. [ 0.002035] ftrace: allocating 21209 entries in 63 pages
  85. [ 0.051262] CPU0: update cpu_capacity 1024
  86. [ 0.051296] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  87. [ 0.051309] [bcm2709_smp_prepare_cpus] enter
  88. [ 0.051447] Setting up static identity map for 0x8240 - 0x8274
  89. [ 0.053090] [bcm2709_boot_secondary] cpu:1 started (0) 18
  90. [ 0.053416] [bcm2709_secondary_init] enter cpu:1
  91. [ 0.053460] CPU1: update cpu_capacity 1024
  92. [ 0.053466] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  93. [ 0.053837] [bcm2709_boot_secondary] cpu:2 started (0) 18
  94. [ 0.054099] [bcm2709_secondary_init] enter cpu:2
  95. [ 0.054120] CPU2: update cpu_capacity 1024
  96. [ 0.054126] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  97. [ 0.054481] [bcm2709_boot_secondary] cpu:3 started (0) 16
  98. [ 0.054664] [bcm2709_secondary_init] enter cpu:3
  99. [ 0.054684] CPU3: update cpu_capacity 1024
  100. [ 0.054690] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  101. [ 0.054751] Brought up 4 CPUs
  102. [ 0.054774] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  103. [ 0.054782] CPU: All CPU(s) started in HYP mode.
  104. [ 0.054789] CPU: Virtualization extensions available.
  105. [ 0.055398] devtmpfs: initialized
  106. [ 0.065592] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  107. [ 0.065908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  108. [ 0.066606] pinctrl core: initialized pinctrl subsystem
  109. [ 0.067136] NET: Registered protocol family 16
  110. [ 0.072361] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  111. [ 0.079267] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  112. [ 0.079278] hw-breakpoint: maximum watchpoint size is 8 bytes.
  113. [ 0.079436] Serial: AMBA PL011 UART driver
  114. [ 0.079574] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  115. [ 0.079738] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  116. [ 0.143380] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  117. [ 0.143939] SCSI subsystem initialized
  118. [ 0.144116] usbcore: registered new interface driver usbfs
  119. [ 0.144203] usbcore: registered new interface driver hub
  120. [ 0.144300] usbcore: registered new device driver usb
  121. [ 0.150818] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-20 18:13
  122. [ 0.178059] clocksource: Switched to clocksource arch_sys_counter
  123. [ 0.222741] FS-Cache: Loaded
  124. [ 0.223008] CacheFiles: Loaded
  125. [ 0.235303] NET: Registered protocol family 2
  126. [ 0.236154] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  127. [ 0.236267] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  128. [ 0.236456] TCP: Hash tables configured (established 8192 bind 8192)
  129. [ 0.236548] UDP hash table entries: 512 (order: 2, 16384 bytes)
  130. [ 0.236594] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  131. [ 0.236825] NET: Registered protocol family 1
  132. [ 0.237132] RPC: Registered named UNIX socket transport module.
  133. [ 0.237143] RPC: Registered udp transport module.
  134. [ 0.237151] RPC: Registered tcp transport module.
  135. [ 0.237159] RPC: Registered tcp NFSv4.1 backchannel transport module.
  136. [ 0.238295] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  137. [ 0.239595] futex hash table entries: 1024 (order: 4, 65536 bytes)
  138. [ 0.252871] VFS: Disk quotas dquot_6.6.0
  139. [ 0.253184] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  140. [ 0.255467] FS-Cache: Netfs 'nfs' registered for caching
  141. [ 0.256359] NFS: Registering the id_resolver key type
  142. [ 0.256406] Key type id_resolver registered
  143. [ 0.256415] Key type id_legacy registered
  144. [ 0.258735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  145. [ 0.258867] io scheduler noop registered
  146. [ 0.258887] io scheduler deadline registered (default)
  147. [ 0.258940] io scheduler cfq registered
  148. [ 0.261448] BCM2708FB: allocated DMA memory ee800000
  149. [ 0.261473] BCM2708FB: allocated DMA channel 0 @ f3007000
  150. [ 0.277906] Console: switching to colour frame buffer device 170x48
  151. [ 1.204011] bcm2835-rng 3f104000.rng: hwrng registered
  152. [ 1.204169] vc-cma: Videocore CMA driver
  153. [ 1.204179] vc-cma: vc_cma_base = 0x00000000
  154. [ 1.204189] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  155. [ 1.204197] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  156. [ 1.204421] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  157. [ 1.219015] brd: module loaded
  158. [ 1.227639] loop: module loaded
  159. [ 1.228549] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
  160. [ 1.229995] Loading iSCSI transport class v2.0-870.
  161. [ 1.230635] usbcore: registered new interface driver smsc95xx
  162. [ 1.230683] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  163. [ 1.430918] Core Release: 2.80a
  164. [ 1.430931] Setting default values for core params
  165. [ 1.430965] Finished setting default values for core params
  166. [ 1.631324] Using Buffer DMA mode
  167. [ 1.631334] Periodic Transfer Interrupt Enhancement - disabled
  168. [ 1.631343] Multiprocessor Interrupt Enhancement - disabled
  169. [ 1.631352] OTG VER PARAM: 0, OTG VER FLAG: 0
  170. [ 1.631366] Dedicated Tx FIFOs mode
  171. [ 1.631651] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
  172. [ 1.631680] FIQ FSM acceleration enabled for :
  173. Non-periodic Split Transactions
  174. Periodic Split Transactions
  175. High-Speed Isochronous Endpoints
  176. Interrupt/Control Split Transaction hack enabled
  177. [ 1.631703] dwc_otg: Microframe scheduler enabled
  178. [ 1.631747] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80446a60
  179. [ 1.631760] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446dd0 length 36
  180. [ 1.631774] WARN::hcd_init_fiq:439: MPHI regs_base at 0xafaa0000
  181. [ 1.631836] dwc_otg 3f980000.usb: DWC OTG Controller
  182. [ 1.631872] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  183. [ 1.631919] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  184. [ 1.631969] Init: Port Power? op_state=1
  185. [ 1.631976] Init: Power Port (0)
  186. [ 1.632187] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  187. [ 1.632202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  188. [ 1.632214] usb usb1: Product: DWC OTG Controller
  189. [ 1.632227] usb usb1: Manufacturer: Linux 4.4.13-v7+ dwc_otg_hcd
  190. [ 1.632239] usb usb1: SerialNumber: 3f980000.usb
  191. [ 1.633002] hub 1-0:1.0: USB hub found
  192. [ 1.633045] hub 1-0:1.0: 1 port detected
  193. [ 1.633645] dwc_otg: FIQ enabled
  194. [ 1.633653] dwc_otg: NAK holdoff enabled
  195. [ 1.633661] dwc_otg: FIQ split-transaction FSM enabled
  196. [ 1.633691] Module dwc_common_port init
  197. [ 1.633934] usbcore: registered new interface driver usb-storage
  198. [ 1.634183] mousedev: PS/2 mouse device common for all mice
  199. [ 1.634883] bcm2835-cpufreq: min=600000 max=1200000
  200. [ 1.635175] sdhci: Secure Digital Host Controller Interface driver
  201. [ 1.635184] sdhci: Copyright(c) Pierre Ossman
  202. [ 1.635485] sdhost: log_buf @ ae813000 (ee813000)
  203. [ 1.708092] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  204. [ 1.710329] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  205. [ 1.710342] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  206. [ 1.764897] mmc0: host does not support reading read-only switch, assuming write-enable
  207. [ 1.766738] mmc0: new high speed SDXC card at address 0001
  208. [ 1.767330] mmcblk0: mmc0:0001 00000 59.6 GiB
  209. [ 1.768204] sdhci-pltfm: SDHCI platform and OF driver helper
  210. [ 1.768625] ledtrig-cpu: registered to indicate activity on CPUs
  211. [ 1.768701] mmcblk0: p1 p2
  212. [ 1.768752] hidraw: raw HID events driver (C) Jiri Kosina
  213. [ 1.769003] usbcore: registered new interface driver usbhid
  214. [ 1.769012] usbhid: USB HID core driver
  215. [ 1.769590] Initializing XFRM netlink socket
  216. [ 1.769621] NET: Registered protocol family 17
  217. [ 1.769762] Key type dns_resolver registered
  218. [ 1.770335] Registering SWP/SWPB emulation handler
  219. [ 1.771060] registered taskstats version 1
  220. [ 1.771234] vc-sm: Videocore shared memory driver
  221. [ 1.771249] [vc_sm_connected_init]: start
  222. [ 1.772898] [vc_sm_connected_init]: end - returning 0
  223. [ 1.776156] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  224. [ 1.776548] of_cfs_init
  225. [ 1.776636] of_cfs_init: OK
  226. [ 1.784891] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  227. [ 1.786442] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  228. [ 1.787995] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  229. [ 1.790796] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  230. [ 1.803425] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  231. [ 1.803473] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  232. [ 1.811013] devtmpfs: mounted
  233. [ 1.811759] Freeing unused kernel memory: 476K (807e7000 - 8085e000)
  234. [ 1.828184] Indeed it is in host mode hprt0 = 00021501
  235. [ 1.881356] mmc1: new high speed SDIO card at address 0001
  236. [ 2.008111] usb 1-1: new high-speed USB device number 2 using dwc_otg
  237. [ 2.008269] Indeed it is in host mode hprt0 = 00001101
  238. [ 2.085031] random: systemd urandom read with 27 bits of entropy available
  239. [ 2.185353] NET: Registered protocol family 10
  240. [ 2.208474] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  241. [ 2.208500] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  242. [ 2.209319] hub 1-1:1.0: USB hub found
  243. [ 2.209425] hub 1-1:1.0: 5 ports detected
  244. [ 2.488127] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  245. [ 2.588636] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  246. [ 2.588661] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  247. [ 2.591786] smsc95xx v1.0.4
  248. [ 2.662172] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a0:b8:3c
  249. [ 2.700557] fuse init (API version 7.23)
  250. [ 2.738185] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
  251. [ 2.857931] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0291
  252. [ 2.857955] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  253. [ 2.958135] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
  254. [ 3.061777] usb 1-1.3: New USB device found, idVendor=058f, idProduct=9254
  255. [ 3.061801] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  256. [ 3.061813] usb 1-1.3: Product: Generic USB Hub
  257. [ 3.061826] usb 1-1.3: Manufacturer: ALCOR
  258. [ 3.063307] hub 1-1.3:1.0: USB hub found
  259. [ 3.065555] hub 1-1.3:1.0: 4 ports detected
  260. [ 3.167324] systemd-udevd[151]: starting version 215
  261. [ 3.338241] usb 1-1.3.2: new low-speed USB device number 6 using dwc_otg
  262. [ 3.464407] usb 1-1.3.2: New USB device found, idVendor=046d, idProduct=c316
  263. [ 3.464434] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  264. [ 3.464448] usb 1-1.3.2: Product: Logitech USB Keyboard
  265. [ 3.464460] usb 1-1.3.2: Manufacturer: Logitech
  266. [ 3.484509] input: Logitech Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:046D:C316.0001/input/input0
  267. [ 3.540256] hid-generic 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-3f980000.usb-1.3.2/input0
  268. [ 3.564985] input: Logitech Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/0003:046D:C316.0002/input/input1
  269. [ 3.618418] hid-generic 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-3f980000.usb-1.3.2/input1
  270. [ 3.698170] usb 1-1.3.3: new low-speed USB device number 7 using dwc_otg
  271. [ 3.788929] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  272. [ 3.820278] usb 1-1.3.3: New USB device found, idVendor=0c40, idProduct=8000
  273. [ 3.820302] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  274. [ 3.820315] usb 1-1.3.3: Product: 2.4GHz receiver
  275. [ 3.820329] usb 1-1.3.3: Manufacturer: ELMCU
  276. [ 3.834219] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:0C40:8000.0003/input/input2
  277. [ 3.889397] hid-generic 0003:0C40:8000.0003: input,hidraw2: USB HID v1.11 Keyboard [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.3.3/input0
  278. [ 3.906948] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.1/0003:0C40:8000.0004/input/input3
  279. [ 3.958686] hid-generic 0003:0C40:8000.0004: input,hidraw3: USB HID v1.11 Mouse [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.3.3/input1
  280. [ 4.595249] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  281. [ 4.597292] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  282. [ 4.673518] xpad 1-1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 0
  283. [ 4.673659] xpad 1-1.2:1.2: xpad_prepare_next_out_packet - found pending output packet 0
  284. [ 4.673765] xpad 1-1.2:1.0: xpad_irq_out - nonzero urb status received: -71
  285. [ 4.673770] xpad 1-1.2:1.4: xpad_prepare_next_out_packet - found pending output packet 0
  286. [ 4.673839] xpad 1-1.2:1.6: xpad_prepare_next_out_packet - found pending output packet 0
  287. [ 4.674033] usbcore: registered new interface driver xpad
  288. [ 4.674567] input: Xbox 360 Wireless Receiver (XBOX) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
  289. [ 4.820138] usbcore: registered new interface driver brcmfmac
  290. [ 4.870974] random: nonblocking pool is initialized
  291. [ 4.953706] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
  292. [ 4.969942] cfg80211: World regulatory domain updated:
  293. [ 4.969965] cfg80211: DFS Master region: unset
  294. [ 4.969974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  295. [ 4.969991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  296. [ 4.970015] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  297. [ 4.970027] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  298. [ 4.970041] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  299. [ 4.970056] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  300. [ 4.970068] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  301. [ 4.970080] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  302. [ 4.970092] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  303. [ 4.990248] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  304. [ 5.237842] systemd-journald[144]: Received request to flush runtime journal from PID 1
  305. [ 6.118485] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
  306. [ 6.118505] brcmfmac: brcmf_add_if: ignore IF event
  307. [ 6.123523] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  308. [ 6.123551] brcmfmac: power management disabled
  309. [ 6.531821] cfg80211: Regulatory domain changed to country: US
  310. [ 6.531837] cfg80211: DFS Master region: FCC
  311. [ 6.531842] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  312. [ 6.531850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  313. [ 6.531858] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  314. [ 6.531865] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  315. [ 6.531871] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  316. [ 6.531877] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  317. [ 6.588413] uart-pl011 3f201000.uart: no DMA platform data
  318. [ 6.808656] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
  319. [ 7.269739] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  320. [ 7.270134] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  321. [ 7.386133] gpiomem-bcm2835 3f200000.gpiomem: gpiomem device opened.
  322. [ 7.679919] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  323. [ 8.904286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  324. [ 8.904908] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  325. [ 8.968705] xpad 1-1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 2
  326. [ 8.968733] xpad 1-1.2:1.0: xpad_irq_in - nonzero urb status received: -71
  327. [ 8.976706] xpad 1-1.2:1.0: xpad_irq_in - nonzero urb status received: -71
  328. [ 11.076534] Bluetooth: Core ver 2.21
  329. [ 11.076589] NET: Registered protocol family 31
  330. [ 11.076594] Bluetooth: HCI device and connection manager initialized
  331. [ 11.076608] Bluetooth: HCI socket layer initialized
  332. [ 11.076618] Bluetooth: L2CAP socket layer initialized
  333. [ 11.076637] Bluetooth: SCO socket layer initialized
  334. [ 11.082537] Bluetooth: HCI UART driver ver 2.3
  335. [ 11.082550] Bluetooth: HCI UART protocol H4 registered
  336. [ 11.082555] Bluetooth: HCI UART protocol Three-wire (H5) registered
  337. [ 11.082656] Bluetooth: HCI UART protocol BCM registered
  338. [ 11.247800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  339. [ 11.247813] Bluetooth: BNEP filters: protocol multicast
  340. [ 11.247857] Bluetooth: BNEP socket layer initialized
  341. [ 615.442191] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  342. [ 615.442220] cfg80211: World regulatory domain updated:
  343. [ 615.442230] cfg80211: DFS Master region: unset
  344. [ 615.442239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  345. [ 615.442255] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  346. [ 615.442268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  347. [ 615.442280] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  348. [ 615.442288] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  349. [ 615.442295] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  350. [ 615.442302] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  351. [ 615.442308] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  352. [ 615.442314] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  353. [ 615.471133] cfg80211: Regulatory domain changed to country: US
  354. [ 615.471154] cfg80211: DFS Master region: FCC
  355. [ 615.471162] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  356. [ 615.471170] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  357. [ 615.471183] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  358. [ 615.471191] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  359. [ 615.471197] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  360. [ 615.471204] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  361. [ 1542.435150] xpad 1-1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 2
  362. [ 1608.069893] xpad 1-1.2:1.0: xpad_irq_in - nonzero urb status received: -71
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!