Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 2.6.33-gentoo (root@leicester) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #5 SMP PREEMPT Thu Mar 18 00:07:09 CET 2010
- [ 0.000000] Command line: root=/dev/sda3
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
- [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
- [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
- [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back
- [ 0.000000] 4 base 0120000000 mask FFF0000000 write-back
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000130000000 aka 4864M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcfff0 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfff0000
- [ 0.000000] 0000000000 - 00cfe00000 page 2M
- [ 0.000000] 00cfe00000 - 00cfff0000 page 4k
- [ 0.000000] kernel direct mapping tables up to cfff0000 @ 8000-e000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
- [ 0.000000] 0100000000 - 0130000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
- [ 0.000000] ACPI: RSDP 00000000000f6640 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 00000000cfff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: FACP 00000000cfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: DSDT 00000000cfff30c0 04C8E (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
- [ 0.000000] ACPI: FACS 00000000cfff0000 00040
- [ 0.000000] ACPI: SSDT 00000000cfff7e40 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
- [ 0.000000] ACPI: HPET 00000000cfff8140 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
- [ 0.000000] ACPI: MCFG 00000000cfff8180 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: APIC 00000000cfff7d80 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0001000000 - 00017929b4] TEXT DATA BSS ==> [0001000000 - 00017929b4]
- [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- [ 0.000000] #3 [0001793000 - 00017930a6] BRK ==> [0001793000 - 00017930a6]
- [ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
- [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
- [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
- [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00130000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cfff0
- [ 0.000000] 0: 0x00100000 -> 0x00130000
- [ 0.000000] On node 0 totalpages: 1048463
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 104 pages reserved
- [ 0.000000] DMA zone: 3839 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 833576 pages, LIFO batch:31
- [ 0.000000] Normal zone: 2688 pages used for memmap
- [ 0.000000] Normal zone: 193920 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77528 r8192 d20776 u524288
- [ 0.000000] pcpu-alloc: s77528 r8192 d20776 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031335
- [ 0.000000] Kernel command line: root=/dev/sda3
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
- [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
- [ 0.000000] Memory: 3987524k/4980736k available (4312k kernel code, 786884k absent, 205424k reserved, 2356k data, 444k init)
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is enabled.
- [ 0.000000] NR_IRQS:512
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2713.744 MHz processor.
- [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5427.48 BogoMIPS (lpj=2713744)
- [ 0.002188] Mount-cache hash table entries: 256
- [ 0.003101] tseg: 0000000000
- [ 0.003111] CPU: Physical Processor ID: 0
- [ 0.003192] CPU: Processor Core ID: 0
- [ 0.003272] mce: CPU supports 5 MCE banks
- [ 0.003359] using C1E aware idle routine
- [ 0.003439] Performance Events: AMD PMU driver.
- [ 0.003546] ... version: 0
- [ 0.003627] ... bit width: 48
- [ 0.003707] ... generic registers: 4
- [ 0.003788] ... value mask: 0000ffffffffffff
- [ 0.003871] ... max period: 00007fffffffffff
- [ 0.004001] ... fixed-purpose events: 0
- [ 0.004082] ... event mask: 000000000000000f
- [ 0.004175] Freeing SMP alternatives: 29k freed
- [ 0.004270] ACPI: Core revision 20091214
- [ 0.011047] Setting APIC routing to flat
- [ 0.012222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.022318] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
- [ 0.026017] Booting Node 0, Processors #1
- [ 0.097046] Brought up 2 CPUs
- [ 0.097200] Total of 2 processors activated (10854.34 BogoMIPS).
- [ 0.097600] khelper used greatest stack depth: 6656 bytes left
- [ 0.097600] khelper used greatest stack depth: 5976 bytes left
- [ 0.097918] NET: Registered protocol family 16
- [ 0.098349] node 0 link 0: io port [1000, fffff]
- [ 0.098351] TOM: 00000000d0000000 aka 3328M
- [ 0.098433] node 0 link 0: mmio [f0000000, f7ffffff]
- [ 0.098436] node 0 link 0: mmio [a0000, bffff]
- [ 0.098438] node 0 link 0: mmio [d0000000, ffb7ffff]
- [ 0.098440] TOM2: 0000000130000000 aka 4864M
- [ 0.098521] bus: [00, ff] on node 0 link 0
- [ 0.098522] bus: 00 index 0 io port: [0, ffff]
- [ 0.098524] bus: 00 index 1 mmio: [d0000000, ffffffff]
- [ 0.098526] bus: 00 index 2 mmio: [a0000, bffff]
- [ 0.098527] bus: 00 index 3 mmio: [130000000, fcffffffff]
- [ 0.098532] ACPI: bus type pci registered
- [ 0.098709] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
- [ 0.098850] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
- [ 0.103438] PCI: Using configuration type 1 for base access
- [ 0.108299] bio: create slab <bio-0> at 0
- [ 0.109428] ACPI: EC: Look up EC in DSDT
- [ 0.116134] ACPI: Interpreter enabled
- [ 0.116217] ACPI: (supports S0 S5)
- [ 0.116352] ACPI: Using IOAPIC for interrupt routing
- [ 0.125613] ACPI: No dock devices found.
- [ 0.125777] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.125903] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
- [ 0.126157] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.126159] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.126161] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.126163] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- [ 0.126165] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored)
- [ 0.126311] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.126414] pci 0000:00:01.1: reg 10: [io 0xe800-0xe83f]
- [ 0.126423] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
- [ 0.126427] pci 0000:00:01.1: reg 24: [io 0x1c80-0x1cbf]
- [ 0.126445] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.126449] pci 0000:00:01.1: PME# disabled
- [ 0.126468] pci 0000:00:02.0: reg 10: [mem 0xfc006000-0xfc006fff]
- [ 0.126485] pci 0000:00:02.0: supports D1 D2
- [ 0.126486] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.126489] pci 0000:00:02.0: PME# disabled
- [ 0.126501] pci 0000:00:02.1: reg 10: [mem 0xfc00a000-0xfc00a0ff]
- [ 0.126518] pci 0000:00:02.1: supports D1 D2
- [ 0.126519] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.126522] pci 0000:00:02.1: PME# disabled
- [ 0.126542] pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f]
- [ 0.126562] pci 0000:00:05.0: reg 10: [io 0xa800-0xa807]
- [ 0.126565] pci 0000:00:05.0: reg 14: [io 0xac00-0xac03]
- [ 0.126567] pci 0000:00:05.0: reg 18: [io 0xb000-0xb007]
- [ 0.126570] pci 0000:00:05.0: reg 1c: [io 0xb400-0xb403]
- [ 0.126573] pci 0000:00:05.0: reg 20: [io 0xb800-0xb80f]
- [ 0.126576] pci 0000:00:05.0: reg 24: [mem 0xfc00b000-0xfc00bfff]
- [ 0.126598] pci 0000:00:05.1: reg 10: [io 0xbc00-0xbc07]
- [ 0.126601] pci 0000:00:05.1: reg 14: [io 0xc000-0xc003]
- [ 0.126603] pci 0000:00:05.1: reg 18: [io 0xc400-0xc407]
- [ 0.126606] pci 0000:00:05.1: reg 1c: [io 0xc800-0xc803]
- [ 0.126609] pci 0000:00:05.1: reg 20: [io 0xcc00-0xcc0f]
- [ 0.126612] pci 0000:00:05.1: reg 24: [mem 0xfc004000-0xfc004fff]
- [ 0.126634] pci 0000:00:05.2: reg 10: [io 0xd000-0xd007]
- [ 0.126637] pci 0000:00:05.2: reg 14: [io 0xd400-0xd403]
- [ 0.126640] pci 0000:00:05.2: reg 18: [io 0xd800-0xd807]
- [ 0.126642] pci 0000:00:05.2: reg 1c: [io 0xdc00-0xdc03]
- [ 0.126645] pci 0000:00:05.2: reg 20: [io 0xe000-0xe00f]
- [ 0.126648] pci 0000:00:05.2: reg 24: [mem 0xfc005000-0xfc005fff]
- [ 0.126692] pci 0000:00:06.1: reg 10: [mem 0xfc000000-0xfc003fff]
- [ 0.126711] pci 0000:00:06.1: PME# supported from D3hot D3cold
- [ 0.126713] pci 0000:00:06.1: PME# disabled
- [ 0.126738] pci 0000:00:08.0: reg 10: [mem 0xfc007000-0xfc007fff]
- [ 0.126740] pci 0000:00:08.0: reg 14: [io 0xe400-0xe407]
- [ 0.126743] pci 0000:00:08.0: reg 18: [mem 0xfc008000-0xfc0080ff]
- [ 0.126746] pci 0000:00:08.0: reg 1c: [mem 0xfc009000-0xfc00900f]
- [ 0.126763] pci 0000:00:08.0: supports D1 D2
- [ 0.126765] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.126768] pci 0000:00:08.0: PME# disabled
- [ 0.126797] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.126799] pci 0000:00:0f.0: PME# disabled
- [ 0.126882] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
- [ 0.127004] pci 0000:00:06.0: bridge window [io 0x8000-0x8fff]
- [ 0.127022] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
- [ 0.127029] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.127035] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
- [ 0.127039] pci 0000:02:00.0: reg 24: [io 0x9000-0x907f]
- [ 0.127043] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.127086] pci 0000:00:0f.0: PCI bridge to [bus 02-02]
- [ 0.127169] pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
- [ 0.127171] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
- [ 0.127174] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.127179] pci_bus 0000:00: on NUMA node 0
- [ 0.127182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.127384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.170732] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.171182] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.171686] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.172255] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.172759] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.173257] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 *7 9 10 11 14 15)
- [ 0.173661] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.174106] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.174612] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.175183] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
- [ 0.175589] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
- [ 0.176019] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 *15)
- [ 0.176424] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.176929] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
- [ 0.177327] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
- [ 0.177731] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.178181] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
- [ 0.178587] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
- [ 0.179067] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 *15)
- [ 0.179505] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
- [ 0.179843] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
- [ 0.180140] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
- [ 0.180477] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
- [ 0.180815] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
- [ 0.181136] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
- [ 0.181448] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
- [ 0.181785] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
- [ 0.182136] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
- [ 0.182522] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
- [ 0.182907] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.183381] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
- [ 0.183767] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
- [ 0.184138] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
- [ 0.184526] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
- [ 0.185031] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.185444] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
- [ 0.185829] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
- [ 0.186211] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
- [ 0.186601] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.186739] vgaarb: loaded
- [ 0.186959] SCSI subsystem initialized
- [ 0.187069] libata version 3.00 loaded.
- [ 0.187168] usbcore: registered new interface driver usbfs
- [ 0.187287] usbcore: registered new interface driver hub
- [ 0.187420] usbcore: registered new device driver usb
- [ 0.187739] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 0.187856] PCI: Using ACPI for IRQ routing
- [ 0.187939] PCI: pci_cache_line_size set to 64 bytes
- [ 0.188152] Switching to clocksource jiffies
- [ 0.188546] pnp: PnP ACPI init
- [ 0.188630] ACPI: bus type pnp registered
- [ 0.191817] pnp: PnP ACPI: found 10 devices
- [ 0.191900] ACPI: ACPI bus type pnp unregistered
- [ 0.191989] system 00:01: [io 0x1000-0x107f] has been reserved
- [ 0.192033] system 00:01: [io 0x1080-0x10ff] has been reserved
- [ 0.192117] system 00:01: [io 0x1400-0x147f] has been reserved
- [ 0.192201] system 00:01: [io 0x1480-0x14ff] has been reserved
- [ 0.192285] system 00:01: [io 0x1800-0x187f] has been reserved
- [ 0.192369] system 00:01: [io 0x1880-0x18ff] has been reserved
- [ 0.192454] system 00:01: [mem 0xd0000000-0xdfffffff] has been reserved
- [ 0.192541] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.192625] system 00:02: [io 0x0800-0x087f] has been reserved
- [ 0.192709] system 00:02: [io 0x0295-0x0314] has been reserved
- [ 0.192793] system 00:02: [io 0x0290-0x0294] has been reserved
- [ 0.192882] system 00:08: [mem 0xf0000000-0xf7ffffff] has been reserved
- [ 0.193029] system 00:09: [mem 0x000d0000-0x000d3fff] has been reserved
- [ 0.193114] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.193200] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.193286] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.193371] system 00:09: [mem 0xcfff0000-0xcfffffff] could not be reserved
- [ 0.193457] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.193542] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.193627] system 00:09: [mem 0x00100000-0xcffeffff] could not be reserved
- [ 0.193713] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.193798] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.198526] Switching to clocksource acpi_pm
- [ 0.198702] pci 0000:00:06.0: PCI bridge to [bus 01-01]
- [ 0.198786] pci 0000:00:06.0: bridge window [io 0x8000-0x8fff]
- [ 0.198871] pci 0000:00:06.0: bridge window [mem disabled]
- [ 0.198955] pci 0000:00:06.0: bridge window [mem pref disabled]
- [ 0.198955] pci 0000:02:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
- [ 0.198955] pci 0000:00:0f.0: PCI bridge to [bus 02-02]
- [ 0.198955] pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
- [ 0.198955] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
- [ 0.198955] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.198955] pci 0000:00:06.0: setting latency timer to 64
- [ 0.198955] pci 0000:00:0f.0: setting latency timer to 64
- [ 0.198955] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.198955] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
- [ 0.198955] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
- [ 0.198955] pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
- [ 0.198955] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
- [ 0.198955] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
- [ 0.198955] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
- [ 0.198955] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.198975] NET: Registered protocol family 2
- [ 0.199109] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.199938] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.201836] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.202393] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.202479] TCP reno registered
- [ 0.202562] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.202671] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.202856] NET: Registered protocol family 1
- [ 0.203054] RPC: Registered udp transport module.
- [ 0.203142] RPC: Registered tcp transport module.
- [ 0.203224] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.228246] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.228371] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.228494] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.228619] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.228746] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.228878] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.229023] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.229119] pci 0000:02:00.0: Boot video device
- [ 0.229121] PCI: CLS 32 bytes, default 64
- [ 0.229269] PCI-DMA: Disabling AGP.
- [ 0.229474] PCI-DMA: aperture base @ 20000000 size 65536 KB
- [ 0.229558] PCI-DMA: using GART IOMMU.
- [ 0.229640] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.233100] microcode: microcode: CPU0: AMD CPU family 0xf not supported
- [ 0.233198] microcode: microcode: CPU1: AMD CPU family 0xf not supported
- [ 0.233321] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.233634] Intel AES-NI instructions are not detected.
- [ 0.234114] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.236888] EXT4-fs: Unable to register as ext2 (-16)
- [ 0.237639] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.237931] Slow work thread pool: Starting up
- [ 0.238125] Slow work thread pool: Ready
- [ 0.238310] msgmni has been set to 7918
- [ 0.239219] alg: No test for fcrypt (fcrypt-generic)
- [ 0.240980] alg: No test for stdrng (krng)
- [ 0.244735] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
- [ 0.244983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.245137] io scheduler noop registered
- [ 0.245320] io scheduler cfq registered (default)
- [ 0.245486] pcieport 0000:00:0f.0: setting latency timer to 64
- [ 0.245504] pcieport 0000:00:0f.0: irq 24 for MSI/MSI-X
- [ 0.254348] hpet_acpi_add: no address or irqs in _CRS
- [ 0.254484] Linux agpgart interface v0.103
- [ 0.254566] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
- [ 0.254705] Hangcheck: Using get_cycles().
- [ 0.255107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.255254] ACPI: Power Button [PWRB]
- [ 0.255408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.255546] ACPI: Power Button [PWRF]
- [ 0.256276] sata_nv 0000:00:05.0: version 3.5
- [ 0.256537] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [ 0.256626] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
- [ 0.256764] sata_nv 0000:00:05.0: Using SWNCQ mode
- [ 0.256885] sata_nv 0000:00:05.0: setting latency timer to 64
- [ 0.256997] scsi0 : sata_nv
- [ 0.257257] scsi1 : sata_nv
- [ 0.257520] ata1: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb800 irq 23
- [ 0.257606] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xb808 irq 23
- [ 0.257929] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
- [ 0.258052] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
- [ 0.258194] sata_nv 0000:00:05.1: Using SWNCQ mode
- [ 0.258309] sata_nv 0000:00:05.1: setting latency timer to 64
- [ 0.258401] scsi2 : sata_nv
- [ 0.258585] scsi3 : sata_nv
- [ 0.258842] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xcc00 irq 22
- [ 0.258928] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc800 bmdma 0xcc08 irq 22
- [ 0.259282] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
- [ 0.259369] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
- [ 0.259506] sata_nv 0000:00:05.2: Using SWNCQ mode
- [ 0.259617] sata_nv 0000:00:05.2: setting latency timer to 64
- [ 0.259712] scsi4 : sata_nv
- [ 0.259898] scsi5 : sata_nv
- [ 0.260178] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 21
- [ 0.260264] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 21
- [ 0.260440] pata_amd 0000:00:04.0: version 0.4.1
- [ 0.260467] pata_amd 0000:00:04.0: setting latency timer to 64
- [ 0.260519] scsi6 : pata_amd
- [ 0.260693] scsi7 : pata_amd
- [ 0.261278] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 0.261364] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 0.261514] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
- [ 0.261652] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
- [ 0.262398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.262772] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
- [ 0.262861] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
- [ 0.263015] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 0.263018] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 0.263178] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 0.263336] ehci_hcd 0000:00:02.1: debug port 1
- [ 0.263422] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
- [ 0.263438] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc00a000
- [ 0.269137] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 0.269351] hub 1-0:1.0: USB hub found
- [ 0.269434] hub 1-0:1.0: 10 ports detected
- [ 0.269589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.269905] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
- [ 0.269990] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
- [ 0.270152] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 0.270154] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 0.270290] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
- [ 0.270437] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfc006000
- [ 0.323249] hub 2-0:1.0: USB hub found
- [ 0.323334] hub 2-0:1.0: 10 ports detected
- [ 0.323518] usbcore: registered new interface driver usblp
- [ 0.323602] Initializing USB Mass Storage driver...
- [ 0.323729] usbcore: registered new interface driver usb-storage
- [ 0.323813] USB Mass Storage support registered.
- [ 0.324034] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.324514] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.324599] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.324802] mice: PS/2 mouse device common for all mice
- [ 0.325114] rtc_cmos 00:05: RTC can wake from S4
- [ 0.325265] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.325374] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 0.325490] i2c /dev entries driver
- [ 0.325886] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
- [ 0.326033] cpuidle: using governor ladder
- [ 0.327194] usbcore: registered new interface driver hiddev
- [ 0.327314] usbcore: registered new interface driver usbhid
- [ 0.328482] usbhid: USB HID core driver
- [ 0.328715] ALSA device list:
- [ 0.328795] No soundcards found.
- [ 0.328874] Netfilter messages via NETLINK v0.30.
- [ 0.328974] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.329366] ctnetlink v0.93: registering with nfnetlink.
- [ 0.329804] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.329911] TCP cubic registered
- [ 0.329992] NET: Registered protocol family 17
- [ 0.570438] ata1: SATA link down (SStatus 0 SControl 300)
- [ 0.573323] ata5: SATA link down (SStatus 0 SControl 300)
- [ 0.713030] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.732216] ata3.00: ATA-7: SAMSUNG HD103UI, 1AA01113, max UDMA7
- [ 0.732300] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.754224] ata3.00: configured for UDMA/133
- [ 0.791136] usb 2-7: new low speed USB device using ohci_hcd and address 2
- [ 0.951344] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input2
- [ 0.951620] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-7/input0
- [ 1.028156] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.047321] ata2.00: HPA detected: current 976771055, native 976773168
- [ 1.047408] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
- [ 1.047492] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.050328] ata2.00: configured for UDMA/133
- [ 1.050491] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
- [ 1.050835] sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.051038] sd 1:0:0:0: [sda] Write Protect is off
- [ 1.051120] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.051151] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.051156] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 1.051461] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UI 1AA0 PQ: 0 ANSI: 5
- [ 1.051759] sda:
- [ 1.051789] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 1.051824] sd 2:0:0:0: [sdb] Write Protect is off
- [ 1.051826] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.051841] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.052393] sdb:
- [ 1.052397] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 1.054137] sdb1
- [ 1.054452] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 1.054648] sda1 sda2 sda3
- [ 1.055090] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 1.168136] usb 2-8: new low speed USB device using ohci_hcd and address 3
- [ 1.331295] input: HID 046a:0011 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input3
- [ 1.331530] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:02.0-8/input0
- [ 1.365317] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.819029] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.822187] ata6.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
- [ 1.828117] ata6.00: configured for UDMA/100
- [ 1.833322] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
- [ 1.845113] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.845260] Uniform CD-ROM driver Revision: 3.20
- [ 1.845442] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 1.845536] sr 5:0:0:0: Attached scsi generic sg2 type 5
- [ 1.845699] ata8: port disabled. ignoring.
- [ 1.851536] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 1.880728] EXT4-fs (sda3): mounted filesystem with ordered data mode
- [ 1.880879] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
- [ 1.880984] Freeing unused kernel memory: 444k freed
- [ 2.052019] async/2 used greatest stack depth: 5920 bytes left
- [ 2.054144] async/1 used greatest stack depth: 5648 bytes left
- [ 2.532298] loadkeys used greatest stack depth: 4968 bytes left
- [ 2.532603] init-early.sh used greatest stack depth: 4696 bytes left
- [ 3.774786] udev: starting version 151
- [ 4.053508] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
- [ 4.053513] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
- [ 4.053552] HDA Intel 0000:00:06.1: irq 25 for MSI/MSI-X
- [ 4.053569] HDA Intel 0000:00:06.1: setting latency timer to 64
- [ 4.241549] nvidia: version magic '2.6.33-gentoo SMP mod_unload ' should be '2.6.33-gentoo SMP preempt mod_unload '
- [ 4.694293] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
- [ 4.694327] i2c i2c-1: nForce2 SMBus adapter at 0x1c80
- [ 4.694475] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 4.694664] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 4.694946] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
- [ 4.694950] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
- [ 4.694954] forcedeth 0000:00:08.0: setting latency timer to 64
- [ 4.695057] nv_probe: set workaround bit for reversed mac addr
- [ 5.207580] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:7d:e9:a8:68
- [ 5.207584] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
- [ 6.528219] EXT4-fs (sdb1): mounted filesystem with ordered data mode
- [ 7.524694] forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X
- [ 7.676200] Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k
- [ 18.123421] nvidia: version magic '2.6.33-gentoo SMP mod_unload ' should be '2.6.33-gentoo SMP preempt mod_unload '
- [ 21.245141] nvidia: version magic '2.6.33-gentoo SMP mod_unload ' should be '2.6.33-gentoo SMP preempt mod_unload '
- [ 24.375261] nvidia: version magic '2.6.33-gentoo SMP mod_unload ' should be '2.6.33-gentoo SMP preempt mod_unload '
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement