Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- login as: pi
- pi@192.168.178.121's password:
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- Last login: Fri Sep 30 18:35:36 2016 from udo-pc.fritz.box
- pi@raspberrypi:~ $ sudo nano /etc/rc.local
- pi@raspberrypi:~ $ sudo raspi-config
- Welcome to fdisk (util-linux 2.25.2).
- Changes will remain in memory only, until you decide to write them.
- Be careful before using the write command.
- Command (m for help): Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x3f89bf95
- Device Boot Start End Sectors Size Id Type
- /dev/mmcblk0p1 8192 137215 129024 63M c W95 FAT32 (LBA)
- /dev/mmcblk0p2 137216 7774207 7636992 3.7G 83 Linux
- Command (m for help): Partition number (1,2, default 2):
- Partition 2 has been deleted.
- Command (m for help): Partition type
- p primary (1 primary, 0 extended, 3 free)
- e extended (container for logical partitions)
- Select (default p): Partition number (2-4, default 2): First sector (2048-62333951, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (137216-62333951, default 62333951):
- Created a new partition 2 of type 'Linux' and of size 29.7 GiB.
- Command (m for help): Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x3f89bf95
- Device Boot Start End Sectors Size Id Type
- /dev/mmcblk0p1 8192 137215 129024 63M c W95 FAT32 (LBA)
- /dev/mmcblk0p2 137216 62333951 62196736 29.7G 83 Linux
- Command (m for help): The partition table has been altered.
- Calling ioctl() to re-read partition table.
- Re-reading the partition table failed.: Device or resource busy
- The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).
- Broadcast message from pi@raspberrypi on pts/0 (Sun 2017-01-29 17:09:53 CET):
- The system is going down for reboot NOW!
- pi@raspberrypi:~ $
- login as: pi
- pi@192.168.178.121's password:
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- Last login: Sun Jan 29 17:08:48 2017 from maikalap.fritz.box
- pi@raspberrypi:~ $ ls -l /sys/bus/w1/devices/
- total 0
- lrwxrwxrwx 1 root root 0 Jan 29 17:11 w1_bus_master1 -> ../../../devices/w1_bus_master1
- pi@raspberrypi:~ $ dm
- dmesg dmidecode dmsetup
- pi@raspberrypi:~ $ dmesg
- [ 0.000000] Booting Linux on physical CPU 0xf00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #888 SMP Mon May 23 20:10:33 BST 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
- [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 241664
- [ 0.000000] free_area_init_node: node 0, pgdat 808c0dc0, node_mem_map b9fa6000
- [ 0.000000] Normal zone: 2124 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f63000 s22592 r8192 d22464 u53248
- [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0x55f768f2 smsc95xx.macaddr=B8:27:EB:F7:68:F2 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 939088K/966656K available (6344K kernel code, 432K rwdata, 1712K rodata, 476K init, 764K bss, 19376K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
- lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
- modules : 0x7f000000 - 0x80000000 ( 16 MB)
- .text : 0x80008000 - 0x807e6420 (8058 kB)
- .init : 0x807e7000 - 0x8085e000 ( 476 kB)
- .data : 0x8085e000 - 0x808ca0c8 ( 433 kB)
- .bss : 0x808cd000 - 0x8098c1ac ( 765 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000032] Switching to timer-based delay loop, resolution 52ns
- [ 0.000351] Console: colour dummy device 80x30
- [ 0.001516] console [tty1] enabled
- [ 0.001568] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.001644] pid_max: default: 32768 minimum: 301
- [ 0.002054] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002104] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.003334] Disabling cpuset control group subsystem
- [ 0.003419] Initializing cgroup subsys io
- [ 0.003478] Initializing cgroup subsys memory
- [ 0.003558] Initializing cgroup subsys devices
- [ 0.003612] Initializing cgroup subsys freezer
- [ 0.003662] Initializing cgroup subsys net_cls
- [ 0.003760] CPU: Testing write buffer coherency: ok
- [ 0.003871] ftrace: allocating 21205 entries in 63 pages
- [ 0.056344] CPU0: update cpu_capacity 1024
- [ 0.056424] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
- [ 0.056462] [bcm2709_smp_prepare_cpus] enter
- [ 0.056618] Setting up static identity map for 0x8240 - 0x8274
- [ 0.059024] [bcm2709_boot_secondary] cpu:1 started (0) 16
- [ 0.059458] [bcm2709_secondary_init] enter cpu:1
- [ 0.059519] CPU1: update cpu_capacity 1024
- [ 0.059528] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
- [ 0.060097] [bcm2709_boot_secondary] cpu:2 started (0) 17
- [ 0.060451] [bcm2709_secondary_init] enter cpu:2
- [ 0.060480] CPU2: update cpu_capacity 1024
- [ 0.060488] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
- [ 0.061026] [bcm2709_boot_secondary] cpu:3 started (0) 17
- [ 0.061281] [bcm2709_secondary_init] enter cpu:3
- [ 0.061310] CPU3: update cpu_capacity 1024
- [ 0.061317] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
- [ 0.061401] Brought up 4 CPUs
- [ 0.061513] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.061546] CPU: All CPU(s) started in HYP mode.
- [ 0.061575] CPU: Virtualization extensions available.
- [ 0.062504] devtmpfs: initialized
- [ 0.074941] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.075442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.076522] pinctrl core: initialized pinctrl subsystem
- [ 0.077343] NET: Registered protocol family 16
- [ 0.083127] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.091548] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.091612] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.091841] Serial: AMBA PL011 UART driver
- [ 0.092190] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
- [ 0.092869] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.167511] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
- [ 0.169640] SCSI subsystem initialized
- [ 0.169912] usbcore: registered new interface driver usbfs
- [ 0.170049] usbcore: registered new interface driver hub
- [ 0.170232] usbcore: registered new device driver usb
- [ 0.175934] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-05-20 19:01
- [ 0.203550] clocksource: Switched to clocksource arch_sys_counter
- [ 0.256745] FS-Cache: Loaded
- [ 0.257176] CacheFiles: Loaded
- [ 0.273629] NET: Registered protocol family 2
- [ 0.274907] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.275076] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.275294] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.275449] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.275536] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.275894] NET: Registered protocol family 1
- [ 0.276428] RPC: Registered named UNIX socket transport module.
- [ 0.276471] RPC: Registered udp transport module.
- [ 0.276503] RPC: Registered tcp transport module.
- [ 0.276534] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.277809] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.279575] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.295561] VFS: Disk quotas dquot_6.6.0
- [ 0.295979] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.298756] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.299950] NFS: Registering the id_resolver key type
- [ 0.300044] Key type id_resolver registered
- [ 0.300076] Key type id_legacy registered
- [ 0.303183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.303425] io scheduler noop registered
- [ 0.303475] io scheduler deadline registered (default)
- [ 0.303639] io scheduler cfq registered
- [ 0.306555] BCM2708FB: allocated DMA memory fac00000
- [ 0.306627] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 0.312530] Console: switching to colour frame buffer device 82x26
- [ 1.086863] bcm2835-rng 3f104000.rng: hwrng registered
- [ 1.088713] vc-cma: Videocore CMA driver
- [ 1.090362] vc-cma: vc_cma_base = 0x00000000
- [ 1.091997] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 1.093612] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 1.095483] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- [ 1.118551] brd: module loaded
- [ 1.131117] loop: module loaded
- [ 1.133725] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
- [ 1.136946] Loading iSCSI transport class v2.0-870.
- [ 1.139317] usbcore: registered new interface driver smsc95xx
- [ 1.140911] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.342762] Core Release: 2.80a
- [ 1.344251] Setting default values for core params
- [ 1.345733] Finished setting default values for core params
- [ 1.547643] Using Buffer DMA mode
- [ 1.549127] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.550652] Multiprocessor Interrupt Enhancement - disabled
- [ 1.552213] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.553779] Dedicated Tx FIFOs mode
- [ 1.555725] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
- [ 1.558893] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- [ 1.566909] dwc_otg: Microframe scheduler enabled
- [ 1.566990] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x804464e4
- [ 1.568649] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446854 length 36
- [ 1.570260] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
- [ 1.571901] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 1.573503] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 1.575169] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
- [ 1.576768] Init: Port Power? op_state=1
- [ 1.578301] Init: Power Port (0)
- [ 1.580084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.581660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.583221] usb usb1: Product: DWC OTG Controller
- [ 1.584783] usb usb1: Manufacturer: Linux 4.4.11-v7+ dwc_otg_hcd
- [ 1.586328] usb usb1: SerialNumber: 3f980000.usb
- [ 1.588909] hub 1-0:1.0: USB hub found
- [ 1.590444] hub 1-0:1.0: 1 port detected
- [ 1.592569] dwc_otg: FIQ enabled
- [ 1.592584] dwc_otg: NAK holdoff enabled
- [ 1.592596] dwc_otg: FIQ split-transaction FSM enabled
- [ 1.592649] Module dwc_common_port init
- [ 1.593012] usbcore: registered new interface driver usb-storage
- [ 1.594867] mousedev: PS/2 mouse device common for all mice
- [ 1.597214] bcm2835-cpufreq: min=600000 max=900000
- [ 1.599050] sdhci: Secure Digital Host Controller Interface driver
- [ 1.600586] sdhci: Copyright(c) Pierre Ossman
- [ 1.602509] sdhost: log_buf @ bac13000 (fac13000)
- [ 1.683742] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 1.685577] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.687849] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.689627] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.691424] usbcore: registered new interface driver usbhid
- [ 1.692980] usbhid: USB HID core driver
- [ 1.695230] Initializing XFRM netlink socket
- [ 1.696830] NET: Registered protocol family 17
- [ 1.698515] Key type dns_resolver registered
- [ 1.700560] Registering SWP/SWPB emulation handler
- [ 1.703218] registered taskstats version 1
- [ 1.705020] vc-sm: Videocore shared memory driver
- [ 1.706503] [vc_sm_connected_init]: start
- [ 1.708707] [vc_sm_connected_init]: end - returning 0
- [ 1.710668] of_cfs_init
- [ 1.712204] of_cfs_init: OK
- [ 1.714802] Waiting for root device /dev/mmcblk0p2...
- [ 1.760505] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.765901] mmc0: new high speed SDHC card at address aaaa
- [ 1.768246] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
- [ 1.771052] mmcblk0: p1 p2
- [ 1.783705] Indeed it is in host mode hprt0 = 00021501
- [ 1.835218] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.838230] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.847771] devtmpfs: mounted
- [ 1.850164] Freeing unused kernel memory: 476K (807e7000 - 8085e000)
- [ 1.963617] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.965554] Indeed it is in host mode hprt0 = 00001101
- [ 2.103697] random: systemd urandom read with 27 bits of entropy available
- [ 2.110728] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- [ 2.115063] systemd[1]: Detected architecture 'arm'.
- [ 2.163958] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 2.165948] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.168803] hub 1-1:1.0: USB hub found
- [ 2.170799] hub 1-1:1.0: 5 ports detected
- [ 2.237611] NET: Registered protocol family 10
- [ 2.241359] systemd[1]: Inserted module 'ipv6'
- [ 2.246382] systemd[1]: Set hostname to <raspberrypi>.
- [ 2.453612] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 2.554049] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.555873] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.560723] smsc95xx v1.0.4
- [ 2.628583] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f7:68:f2
- [ 2.664137] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 2.673736] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 2.677876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.681768] systemd[1]: Starting Remote File Systems (Pre).
- [ 2.686576] systemd[1]: Reached target Remote File Systems (Pre).
- [ 2.688694] systemd[1]: Starting Encrypted Volumes.
- [ 2.693152] systemd[1]: Reached target Encrypted Volumes.
- [ 2.695484] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 2.702832] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 2.707360] systemd[1]: Starting Swap.
- [ 2.712025] systemd[1]: Reached target Swap.
- [ 2.714258] systemd[1]: Expecting device dev-mmcblk0p1.device...
- [ 2.718647] systemd[1]: Starting Root Slice.
- [ 2.722961] systemd[1]: Created slice Root Slice.
- [ 2.724983] systemd[1]: Starting User and Session Slice.
- [ 2.729227] systemd[1]: Created slice User and Session Slice.
- [ 2.731108] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 2.735447] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 2.737401] systemd[1]: Starting Delayed Shutdown Socket.
- [ 2.741632] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 2.743636] systemd[1]: Starting Journal Socket (/dev/log).
- [ 2.747764] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 2.749607] systemd[1]: Starting udev Control Socket.
- [ 2.753683] systemd[1]: Listening on udev Control Socket.
- [ 2.755544] systemd[1]: Starting udev Kernel Socket.
- [ 2.759504] systemd[1]: Listening on udev Kernel Socket.
- [ 2.761358] systemd[1]: Starting Journal Socket.
- [ 2.765535] systemd[1]: Listening on Journal Socket.
- [ 2.767447] systemd[1]: Starting System Slice.
- [ 2.771532] systemd[1]: Created slice System Slice.
- [ 2.773391] systemd[1]: Starting File System Check on Root Device...
- [ 2.804486] systemd[1]: Starting system-systemd\x2dfsck.slice.
- [ 2.809071] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 2.810926] systemd[1]: Starting system-getty.slice.
- [ 2.815735] systemd[1]: Created slice system-getty.slice.
- [ 2.817798] systemd[1]: Starting Increase datagram queue length...
- [ 2.826225] systemd[1]: Starting Restore / save the current clock...
- [ 2.843083] systemd[1]: Started Set Up Additional Binary Formats.
- [ 2.845624] systemd[1]: Mounted Huge Pages File System.
- [ 2.847536] systemd[1]: Starting udev Coldplug all Devices...
- [ 2.857145] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 2.892696] systemd[1]: Starting Load Kernel Modules...
- [ 2.935101] systemd[1]: Mounting Debug File System...
- [ 2.944444] systemd[1]: Mounting POSIX Message Queue File System...
- [ 2.957621] systemd[1]: Starting Slices.
- [ 2.962492] systemd[1]: Reached target Slices.
- [ 2.974879] systemd[1]: Started Increase datagram queue length.
- [ 3.003985] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 3.012662] systemd[1]: Mounted Debug File System.
- [ 3.016389] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
- [ 3.022735] systemd[1]: Started Restore / save the current clock.
- [ 3.023885] i2c /dev entries driver
- [ 3.030460] systemd[1]: Mounted POSIX Message Queue File System.
- [ 3.037054] systemd[1]: Time has been changed
- [ 3.041672] Driver for 1-wire Dallas network protocol.
- [ 3.068211] systemd[1]: Started File System Check on Root Device.
- [ 3.075988] systemd[1]: Started Load Kernel Modules.
- [ 3.082193] systemd[1]: Started udev Coldplug all Devices.
- [ 3.265105] systemd[1]: Starting Apply Kernel Variables...
- [ 3.304939] systemd[1]: Mounting Configuration File System...
- [ 3.313300] systemd[1]: Mounted FUSE Control File System.
- [ 3.316244] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 3.325736] systemd[1]: Starting Syslog Socket.
- [ 3.328794] systemd[1]: Listening on Syslog Socket.
- [ 3.329107] systemd[1]: Starting Journal Service...
- [ 3.339121] systemd[1]: Started Journal Service.
- [ 3.494852] systemd-udevd[134]: starting version 215
- [ 3.763052] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
- [ 3.769092] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- [ 4.279726] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 4.642837] systemd-journald[132]: Received request to flush runtime journal from PID 1
- [ 5.382303] EXT4-fs (mmcblk0p2): resizing filesystem from 954624 to 7774592 blocks
- [ 5.614953] EXT4-fs (mmcblk0p2): resized filesystem to 7774592
- [ 5.692708] Adding 102396k swap on /var/swap. Priority:-1 extents:3 across:200700k SSFS
- [ 5.864544] cfg80211: World regulatory domain updated:
- [ 5.864569] cfg80211: DFS Master region: unset
- [ 5.864578] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 5.864592] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.864602] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.864612] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.864625] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 5.864637] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 5.864648] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 5.864658] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.864668] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 6.235764] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 6.236038] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 7.847438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 7.847982] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 14.631545] random: nonblocking pool is initialized
- [ 14.633168] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
- pi@raspberrypi:~ $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement