API tools faq
paste
sam45

last_kmsg

sam45
Mar 9th, 2014
94
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.11 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.0.72-cyanogenmod-g496ddf4 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Nov 5 23:05:26 UTC 2013
  3. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: Tuna
  6. [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  8. [ 0.000000] OMAP4460 ES1.1
  9. [ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
  10. [ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
  11. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c125c000 s7520 r8192 d12960 u32768
  12. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 180224
  13. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=0149A97C0C01701E androidboot.bootloader=PRIMELC03 androidboot.baseband=I9250XXLJ1 lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.macaddr=
  14. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  15. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  16. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  17. [ 0.000000] Memory: 512MB 200MB = 712MB total
  18. [ 0.000000] Memory: 706892k/706892k available, 341684k reserved, 598016K highmem
  19. [ 0.000000] Virtual kernel memory layout:
  20. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  21. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  22. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  23. [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
  24. [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  25. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  26. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  27. [ 0.000000] .init : 0xc0008000 - 0xc0052000 ( 296 kB)
  28. [ 0.000000] .text : 0xc0052000 - 0xc0841000 (8124 kB)
  29. [ 0.000000] .data : 0xc0842000 - 0xc08a7610 ( 406 kB)
  30. [ 0.000000] .bss : 0xc08a7634 - 0xc0a548b0 (1717 kB)
  31. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  32. [ 0.000000] Preemptible hierarchical RCU implementation.
  33. [ 0.000000] NR_IRQS:410
  34. [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  35. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  36. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  37. [ 0.000000] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
  38. [ 0.070404] pid_max: default: 32768 minimum: 301
  39. [ 0.070404] Security Framework initialized
  40. [ 0.070648] SELinux: Initializing.
  41. [ 0.070831] Mount-cache hash table entries: 512
  42. [ 0.070831] Initializing cgroup subsys debug
  43. [ 0.070831] Initializing cgroup subsys cpuacct
  44. [ 0.071777] Initializing cgroup subsys freezer
  45. [ 0.071838] CPU: Testing write buffer coherency: ok
  46. [ 0.072052] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  47. [ 0.072235] L310 cache controller enabled
  48. [ 0.072235] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
  49. [ 0.150299] CPU1: Booted secondary processor
  50. [ 0.181549] Brought up 2 CPUs
  51. [ 0.181549] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
  52. [ 0.181823] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
  53. [ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
  54. [ 0.185394] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
  55. [ 0.185424] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
  56. [ 0.185424] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
  57. [ 0.185424] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
  58. [ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  59. [ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  60. [ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
  61. [ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
  62. [ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
  63. [ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
  64. [ 0.185516] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  65. [ 0.186584] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
  66. [ 0.190795] omap_hwmod: mcpdm: cannot be enabled (3)
  67. [ 0.196075] print_constraints: dummy:
  68. [ 0.196075] NET: Registered protocol family 16
  69. [ 0.196960] GPMC revision 6.0
  70. [ 0.197143] EMIF0 is enabled with IRQ142
  71. [ 0.198211] EMIF1 is enabled with IRQ143
  72. [ 0.198242] Last reset was warm software reset (PRM_RSTST=0x2)
  73. [ 0.198242]
  74. [ 0.198272] HSI: device registered as omap_hwmod: hsi
  75. [ 0.198608] OMAP GPIO hardware version 0.1
  76. [ 0.199768] omap_mux_init: Add partition: #1: core, flags: 2
  77. [ 0.200225] omap_mux_init: Add partition: #2: wkup, flags: 2
  78. [ 0.201812] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
  79. [ 0.204010] ram_console: got buffer at a0000000, size 200000
  80. [ 0.204010] ram_console: found existing buffer, size 1387632, start 1387632
  81. [ 3.458526] console [ram-1] enabled
  82. [ 3.458587] Using tuna_oled_factory_info_6500k
  83. [ 3.462280] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
  84. [ 3.462738] omap_mux_init_gpio: Could not set gpio102
  85. [ 3.463348] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
  86. [ 3.463562] omap_mux_init_gpio: Could not set gpio101
  87. [ 3.658050] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
  88. [ 3.658050] omap_mux_init_gpio: Could not set gpio100
  89. [ 3.658050] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  90. [ 3.658050] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  91. [ 3.664459] hw-breakpoint: maximum watchpoint size is 4 bytes.
  92. [ 3.669494] OMAP DMA hardware revision 0.0
  93. [ 3.669738] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
  94. [ 3.679138] bio: create slab <bio-0> at 0
  95. [ 3.679718] print_constraints: vwl1271: 2000 mV
  96. [ 3.679718] SCSI subsystem initialized
  97. [ 3.681945] usbcore: registered new interface driver usbfs
  98. [ 3.682434] usbcore: registered new interface driver hub
  99. [ 3.682708] usbcore: registered new device driver usb
  100. [ 3.684020] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
  101. [ 3.697143] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
  102. [ 3.697875] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  103. [ 3.700988] twl6030: PIH (irq 39) chaining IRQs 368..387
  104. [ 3.703155] print_constraints: VUSB: 3300 mV normal standby
  105. [ 3.703918] print_constraints: VMMC: 1800 mV normal standby
  106. [ 3.704681] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  107. [ 3.704772] print_constraints: VUSIM: 2200 mV normal standby
  108. [ 3.705780] print_constraints: VCXIO: 1800 mV normal standby
  109. [ 3.705780] print_constraints: VDAC: 1800 mV normal standby
  110. [ 3.707214] print_constraints: VAUX1_6030: 3000 mV normal standby
  111. [ 3.707977] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  112. [ 3.708068] print_constraints: VAUX3_6030: 3100 mV normal standby
  113. [ 3.709686] print_constraints: CLK32KG:
  114. [ 3.710693] print_constraints: CLK32KAUDIO:
  115. [ 3.711547] print_constraints: VDD3:
  116. [ 3.712310] print_constraints: VMEM: at 1250 mV
  117. [ 3.713348] print_constraints: V2V1: 2100 mV normal standby
  118. [ 3.714172] print_constraints: VANA: 2100 mV normal standby
  119. [ 3.728393] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  120. [ 3.744018] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
  121. [ 3.759643] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
  122. [ 3.760620] omap-rproc omap-rproc.0: dsp is available
  123. [ 3.761322] omap-rproc omap-rproc.1: ipu is available
  124. [ 3.761322] Advanced Linux Sound Architecture Driver Version 1.0.24.
  125. [ 3.762451] Bluetooth: Core ver 2.16
  126. [ 3.762451] NET: Registered protocol family 31
  127. [ 3.762725] Bluetooth: HCI device and connection manager initialized
  128. [ 3.762725] Bluetooth: HCI socket layer initialized
  129. [ 3.762725] Bluetooth: L2CAP socket layer initialized
  130. [ 3.762725] Bluetooth: SCO socket layer initialized
  131. [ 3.763732] cfg80211: Calling CRDA to update world regulatory domain
  132. [ 3.764099] Switching to clocksource 32k_counter
  133. [ 3.767456] Switched to NOHz mode on CPU #0
  134. [ 3.767456] Switched to NOHz mode on CPU #1
  135. [ 3.781829] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
  136. [ 3.783508] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  137. [ 3.783569] musb-hdrc: MHDRC RTL version 2.0
  138. [ 3.783569] musb-hdrc: setup fifo_mode 4
  139. [ 3.784118] musb-hdrc: 28/31 max ep, 16384/16384 memory
  140. [ 3.784118] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  141. [ 3.784942] NET: Registered protocol family 2
  142. [ 3.784942] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  143. [ 3.786590] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  144. [ 3.786590] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  145. [ 3.786590] TCP: Hash tables configured (established 16384 bind 16384)
  146. [ 3.787780] TCP reno registered
  147. [ 3.787902] UDP hash table entries: 128 (order: 0, 4096 bytes)
  148. [ 3.788116] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  149. [ 3.788116] NET: Registered protocol family 1
  150. [ 3.788116] Trying to unpack rootfs image as initramfs...
  151. [ 4.092559] Freeing initrd memory: 3232K
  152. [ 4.773254] PHOENIX_LAST_TURNOFF_STS: 0x01
  153. [ 4.773925] console [ttyFIQ0] enabled
  154. [ 4.778198] Registered FIQ tty driver c78c1b40
  155. [ 4.779449] omap-iommu omap-iommu.0: ducati registered
  156. [ 4.779449] omap-iommu omap-iommu.1: tesla registered
  157. [ 4.779449] audit: initializing netlink socket (disabled)
  158. [ 4.780639] type=2000 audit(4.765:1): initialized
  159. [ 4.781768] highmem bounce pool size: 64 pages
  160. [ 4.782226] ashmem: initialized
  161. [ 4.789916] NTFS driver 2.1.30 [Flags: R/O].
  162. [ 4.793640] fuse init (API version 7.16)
  163. [ 4.793640] msgmni has been set to 218
  164. [ 4.794128] SELinux: Registering netfilter hooks
  165. [ 4.794128] Registering char device tf_driver (122:0)
  166. [ 4.797485] io scheduler noop registered
  167. [ 4.797576] io scheduler deadline registered
  168. [ 4.797576] io scheduler row registered
  169. [ 4.798004] io scheduler cfq registered (default)
  170. [ 4.799041] OMAP DSS rev 4.0
  171. [ 4.801574] dsscomp: initializing.
  172. [ 4.801574] misc dsscomp: display0=s6e8aa0
  173. [ 4.801574] misc dsscomp: display1=hdmi_panel
  174. [ 4.801574] misc dsscomp: found 2 displays and 4 overlays
  175. [ 4.803253] could not allocate slot
  176. [ 4.804351] omap-rproc omap-rproc.1: powering up ipu
  177. [ 4.804840] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
  178. [ 4.805603] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
  179. [ 4.805603] rpmsg_server_sample rpmsg1: new channel: 0x89 -> 0xffffffff!
  180. [ 4.806823] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  181. [ 4.850402] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  182. [ 4.874145] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  183. [ 4.952117] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
  184. [ 4.952117] omap_ion_probe: adding heap tiler of type 4 with ae900000@5100000
  185. [ 4.952117] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ada00000@f00000
  186. [ 4.961029] brd: module loaded
  187. [ 4.964660] loop: module loaded
  188. [ 4.965881] input: barometer as /devices/virtual/input/input0
  189. [ 4.965881] sec_jack_probe : Registering jack driver
  190. [ 4.966705] i2c i2c-4: mpu_probe: 0
  191. [ 4.978485] i2c i2c-4: Installing irq using 205
  192. [ 4.978485] i2c i2c-4: Module Param interface = mpuirq
  193. [ 4.979064] i2c-core: driver [mpu3050] using legacy suspend method
  194. [ 4.979064] i2c-core: driver [mpu3050] using legacy resume method
  195. [ 4.979461] mpu_init: Probe name mpu3050
  196. [ 4.979461] i2c i2c-4: bma250_mod_probe: bma250
  197. [ 4.979461] i2c i2c-4: Installing Accel irq using 282
  198. [ 4.991210] i2c i2c-4: mpu3050: +bma250
  199. [ 4.991210] bma250_mod_init: Probe name bma250_mod
  200. [ 4.991210] i2c i2c-4: yas530_mod_probe: yas530
  201. [ 4.991729] i2c i2c-4: Installing Compass irq using 336
  202. [ 5.014068] i2c i2c-4: mpu3050: +yas530
  203. [ 5.014068] yas530_mod_init: Probe name yas530_mod
  204. [ 5.020782] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
  205. [ 5.025573] m25p80 spi3.0: w25q80 (1024 Kbytes)
  206. [ 5.026885] PPP generic driver version 2.4.2
  207. [ 5.027191] PPP Deflate Compression module registered
  208. [ 5.027191] PPP BSD Compression module registered
  209. [ 5.029968] PPP MPPE Compression module registered
  210. [ 5.030181] NET: Registered protocol family 24
  211. [ 5.030181] tun: Universal TUN/TAP device driver, 1.6
  212. [ 5.032470] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  213. [ 5.032470] usbcore: registered new interface driver asix
  214. [ 5.032470] usbcore: registered new interface driver cdc_ether
  215. [ 5.032470] usbcore: registered new interface driver net1080
  216. [ 5.033447] usbcore: registered new interface driver cdc_subset
  217. [ 5.033447] usbcore: registered new interface driver zaurus
  218. [ 5.033447] cdc_ncm: 04-Aug-2011
  219. [ 5.033447] usbcore: registered new interface driver cdc_ncm
  220. [ 5.033447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  221. [ 5.033447] usbcore: registered new interface driver cdc_acm
  222. [ 5.033447] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  223. [ 5.034851] Initializing USB Mass Storage driver...
  224. [ 5.034851] usbcore: registered new interface driver usb-storage
  225. [ 5.035247] USB Mass Storage support registered.
  226. [ 5.035247] usbcore: registered new interface driver usbserial
  227. [ 5.035247] usbserial: USB Serial Driver core
  228. [ 5.237182] android_usb gadget: Mass Storage Function, version: 2009/09/11
  229. [ 5.237182] android_usb gadget: Number of LUNs=1
  230. [ 5.237182] lun0: LUN: removable file: (no medium)
  231. [ 5.237640] android_usb gadget: android_usb ready
  232. [ 5.238128] musb-hdrc musb-hdrc: MUSB HDRC host driver
  233. [ 5.238464] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
  234. [ 5.238464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  235. [ 5.238677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  236. [ 5.238677] usb usb1: Product: MUSB HDRC host driver
  237. [ 5.238677] usb usb1: Manufacturer: Linux 3.0.72-cyanogenmod-g496ddf4 musb-hcd
  238. [ 5.239349] usb usb1: SerialNumber: musb-hdrc
  239. [ 5.239349] hub 1-0:1.0: USB hub found
  240. [ 5.239349] hub 1-0:1.0: 1 port detected
  241. [ 5.240997] usbcore: registered new interface driver xpad
  242. [ 5.240997] usbcore: registered new interface driver usb_acecad
  243. [ 5.240997] acecad: v3.2:USB Acecad Flair tablet driver
  244. [ 5.240997] usbcore: registered new interface driver aiptek
  245. [ 5.241577] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  246. [ 5.241577] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  247. [ 5.241577] usbcore: registered new interface driver gtco
  248. [ 5.242309] GTCO usb driver version: 2.00.0006
  249. [ 5.242309] usbcore: registered new interface driver hanwang
  250. [ 5.242767] usbcore: registered new interface driver kbtab
  251. [ 5.242767] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  252. [ 5.242767] usbcore: registered new interface driver wacom
  253. [ 5.243316] wacom: v1.52:USB Wacom tablet driver
  254. [ 5.243835] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
  255. [ 5.624084] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
  256. [ 5.624572] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
  257. [ 5.624786] input: tuna-gpio-keypad as /devices/virtual/input/input2
  258. [ 5.625732] input: proximity as /devices/virtual/input/input3
  259. [ 5.626586] input: lightsensor-level as /devices/virtual/input/input4
  260. [ 5.630126] using rtc device, twl_rtc, for alarms
  261. [ 5.630126] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  262. [ 5.631164] i2c /dev entries driver
  263. [ 5.632171] dmm: probe base: fd300000, irq 145
  264. [ 5.635559] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
  265. [ 5.638092] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
  266. [ 5.641052] device-mapper: uevent: version 1.0.3
  267. [ 5.641540] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  268. [ 5.641784] Bluetooth: HCI UART driver ver 2.2
  269. [ 5.641967] Bluetooth: HCI H4 protocol initialized
  270. [ 5.642242] cpuidle: using governor ladder
  271. [ 5.642364] cpuidle: using governor menu
  272. [ 5.650329] usbcore: registered new interface driver usbhid
  273. [ 5.650421] usbhid: USB HID core driver
  274. [ 5.651458] logger: created 256K log 'log_main'
  275. [ 5.652008] logger: created 256K log 'log_events'
  276. [ 5.652313] logger: created 256K log 'log_radio'
  277. [ 5.652587] logger: created 256K log 'log_system'
  278. [ 5.653656] OMAP HSI: HSI driver version 0.4.2
  279. [ 5.653930] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
  280. [ 5.654144] omap_hsi omap_hsi.0: HSI port 1 initialized
  281. [ 5.654327] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
  282. [ 5.654785] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
  283. [ 5.655303] max17040 4-0036: online = 1 vcell = 4016250 soc = 98 status = 2 health = 1 temp = 270 charger status = 0
  284. [ 5.656982] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
  285. [ 5.660400] SDP4430 SoC init
  286. [ 5.692291] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  287. [ 5.693695] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  288. [ 5.695709] asoc: null-codec-dai <-> Voice mapping ok
  289. [ 5.697113] asoc: null-codec-dai <-> Tones mapping ok
  290. [ 5.698547] asoc: null-codec-dai <-> Vibra mapping ok
  291. [ 5.699676] asoc: null-codec-dai <-> MODEM mapping ok
  292. [ 5.700714] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
  293. [ 5.702667] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  294. [ 5.704071] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
  295. [ 5.705535] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
  296. [ 5.707763] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
  297. [ 5.708892] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
  298. [ 5.709869] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
  299. [ 5.710906] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
  300. [ 5.711883] asoc: twl6040-vib <-> mcpdm-vib mapping ok
  301. [ 5.712951] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
  302. [ 5.713958] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
  303. [ 5.715026] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  304. [ 5.716033] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
  305. [ 5.718017] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
  306. [ 5.721252] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
  307. [ 5.721984] ALSA device list:
  308. [ 5.722076] #0: TI OMAP4 Board
  309. [ 5.722259] #1: OMAP4HDMI
  310. [ 5.722503] GACT probability NOT on
  311. [ 5.722595] Mirror/redirect action on
  312. [ 5.722717] u32 classifier
  313. [ 5.722900] Actions configured
  314. [ 5.722991] Netfilter messages via NETLINK v0.30.
  315. [ 5.723175] nf_conntrack version 0.5.0 (11095 buckets, 44380 max)
  316. [ 5.724487] ctnetlink v0.93: registering with nfnetlink.
  317. [ 5.724639] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  318. [ 5.724822] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  319. [ 5.725463] xt_time: kernel timezone is -0000
  320. [ 5.727844] ip_tables: (C) 2000-2006 Netfilter Core Team
  321. [ 5.728179] arp_tables: (C) 2002 David S. Miller
  322. [ 5.728454] TCP cubic registered
  323. [ 5.728546] Initializing XFRM netlink socket
  324. [ 5.729736] NET: Registered protocol family 10
  325. [ 5.735900] Mobile IPv6
  326. [ 5.736083] ip6_tables: (C) 2000-2006 Netfilter Core Team
  327. [ 5.736511] IPv6 over IPv4 tunneling driver
  328. [ 5.742858] NET: Registered protocol family 17
  329. [ 5.742980] NET: Registered protocol family 15
  330. [ 5.743438] Bluetooth: RFCOMM TTY layer initialized
  331. [ 5.743560] Bluetooth: RFCOMM socket layer initialized
  332. [ 5.743682] Bluetooth: RFCOMM ver 1.11
  333. [ 5.743865] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  334. [ 5.743988] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  335. [ 5.744323] NET: Registered protocol family 35
  336. [ 5.744781] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  337. [ 5.745086] ThumbEE CPU extension supported.
  338. [ 5.745208] Registering SWP/SWPB emulation handler
  339. [ 5.752807] Reprogramming LPDDR2 timings to 400000000 Hz
  340. [ 5.753784] Power Management for TI OMAP4.
  341. [ 5.753997] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
  342. [ 5.754882] sr_init: No PMIC hook to init smartreflex
  343. [ 5.755249] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  344. [ 5.755493] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  345. [ 5.755828] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
  346. [ 5.756317] SmartReflex class 1.5 driver: initialized (86400000ms)
  347. [ 5.757568] mmc0: new high speed MMC card at address 0001
  348. [ 5.758117] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
  349. [ 5.758361] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
  350. [ 5.758453] dmtimer id 10 at 48086000...
  351. [ 5.758483] OMAP_TIMER_OCP_CFG_REG: 0x000015
  352. [ 5.758483] OMAP_TIMER_SYS_STAT_REG: 0x000001
  353. [ 5.758483] OMAP_TIMER_STAT_REG: 0x000000
  354. [ 5.758514] OMAP_TIMER_INT_EN_REG: 0x000000
  355. [ 5.758514] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
  356. [ 5.758514] OMAP_TIMER_CTRL_REG: 0x000000
  357. [ 5.758514] OMAP_TIMER_COUNTER_REG: 0x000000
  358. [ 5.758544] OMAP_TIMER_LOAD_REG: 0x000000
  359. [ 5.758544] OMAP_TIMER_MATCH_REG: 0x000000
  360. [ 5.758544] OMAP_TIMER_IF_CTRL_REG: 0x000004
  361. [ 5.759155] dmtimer id 10 at 48086000...
  362. [ 5.759155] OMAP_TIMER_OCP_CFG_REG: 0x000015
  363. [ 5.759155] OMAP_TIMER_SYS_STAT_REG: 0x000001
  364. [ 5.759185] OMAP_TIMER_STAT_REG: 0x000000
  365. [ 5.759185] OMAP_TIMER_INT_EN_REG: 0x000000
  366. [ 5.759185] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
  367. [ 5.759216] OMAP_TIMER_CTRL_REG: 0x001842
  368. [ 5.759216] OMAP_TIMER_COUNTER_REG: 0xfffffffe
  369. [ 5.759216] OMAP_TIMER_LOAD_REG: 0xfffffa49
  370. [ 5.759216] OMAP_TIMER_MATCH_REG: 0xfffffa50
  371. [ 5.759246] OMAP_TIMER_IF_CTRL_REG: 0x000004
  372. [ 5.761077] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
  373. [ 5.761138] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
  374. [ 5.761474] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
  375. [ 5.761779] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
  376. [ 5.762054] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
  377. [ 5.762359] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
  378. [ 5.762573] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
  379. [ 5.762878] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
  380. [ 5.763153] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
  381. [ 5.767639] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
  382. [ 5.770599] mmcblk0boot1: unknown partition table
  383. [ 5.771972] mmcblk0boot0: unknown partition table
  384. [ 5.780120] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1203000,Calib=1040000,margin=0
  385. [ 5.780334] sr_class1p5_calib_work: iva: Calibration complete: Voltage:Nominal=1140000,Calib=974860,margin=0
  386. [ 5.780609] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1127000,Calib=1038160,margin=13000
  387. [ 5.784210] clock: disabling unused clocks to save power
  388. [ 6.038116] cannot apply mgr(lcd) on inactive device
  389. [ 6.038543] omapfb omapfb: failed to apply dispc config
  390. [ 6.038787] cannot apply mgr(tv) on inactive device
  391. [ 6.039245] omapfb omapfb: failed to apply dispc config
  392. [ 6.039459] cannot apply mgr(lcd2) on inactive device
  393. [ 6.039886] omapfb omapfb: failed to apply dispc config
  394. [ 6.044281] regulator_init_complete: VAUX2_6030: disabling
  395. [ 6.045440] regulator_init_complete: VDAC: disabling
  396. [ 6.046966] regulator_init_complete: VPP: disabling
  397. [ 6.048339] omaplfb OMAPLFBInitFBDev: Device 0: Requesting 4 TILER 2D framebuffers
  398. [ 6.049896] ## wifi_probe
  399. [ 6.050079] wifi_set_power = 1
  400. [ 6.569213] wifi_set_carddetect = 1
  401. [ 6.569976]
  402. [ 6.569976] Dongle Host Driver, version 5.90.195.114
  403. [ 6.569976] Compiled in drivers/net/wireless/bcmdhd on Nov 5 2013 at 23:04:30
  404. [ 6.623809] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1380000,Calib=1250000,margin=0
  405. [ 6.685211] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  406. [ 6.730224] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  407. [ 6.742095] mmc1: new high speed SDIO card at address 0001
  408. [ 6.742767] F1 signature read @0x18000000=0x16844330
  409. [ 6.746154] DHD: dongle ram size is set to 294912(orig 294912)
  410. [ 6.746704] wl_create_event_handler thr:5e started
  411. [ 6.749114] p2p0: P2P Interface Registered
  412. [ 6.749237] dhd_attach thr:5f started
  413. [ 6.749359] dhd_attach thr:60 started
  414. [ 6.749542] dhd_attach thr:61 started
  415. [ 6.751892] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  416. [ 6.752014] wifi_set_power = 0
  417. [ 7.272979] =========== WLAN placed in RESET ========
  418. [ 7.274414] fsa9480 4-0025: nothing attached, keeping ownership of port
  419. [ 7.275848] twl_rtc twl_rtc: setting system clock to 2014-03-09 11:37:43 UTC (1394365063)
  420. [ 7.278137] Freeing init memory: 296K
  421. [ 7.294494] SELinux: 512 avtab hash slots, 1574 rules.
  422. [ 7.295074] max17040 4-0036: online = 1 vcell = 4041250 soc = 98 status = 2 health = 1 temp = 270 charger status = 0
  423. [ 7.297180] SELinux: 512 avtab hash slots, 1574 rules.
  424. [ 7.297546] SELinux: 1 users, 2 roles, 288 types, 13 bools, 1 sens, 1024 cats
  425. [ 7.297882] SELinux: 84 classes, 1574 rules
  426. [ 7.299377] SELinux: Completing initialization.
  427. [ 7.299468] SELinux: Setting up existing superblocks.
  428. [ 7.299652] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  429. [ 7.299774] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  430. [ 7.300415] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  431. [ 7.300598] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  432. [ 7.300720] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  433. [ 7.300903] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  434. [ 7.305297] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  435. [ 7.305419] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  436. [ 7.305603] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  437. [ 7.305786] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  438. [ 7.305908] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  439. [ 7.306152] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
  440. [ 7.306335] SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
  441. [ 7.306488] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  442. [ 7.306640] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  443. [ 7.444305] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=962000,Calib=898900,margin=38000
  444. [ 7.491058] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=12
  445. [ 7.491333] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1025000,Calib=840000,margin=10000
  446. [ 7.567840] type=1403 audit(1394365063.781:2): policy loaded auid=4294967295 ses=4294967295
  447. [ 7.568481] SELinux: Loaded policy from (null)
  448. [ 7.580291] init: /init.rc: 42: invalid command 'powerctl'
  449. [ 7.580413] init: could not import file '/init.recovery.tuna.rc' from '/init.rc'
  450. [ 7.582366] init: cannot find '/sbin/healthd', disabling 'healthd'
  451. [ 7.724792] android_usb: already disabled
  452. [ 7.725280] init: Unable to open persistent property directory /data/property errno: 2
  453. [ 7.726867] android_usb: already disabled
  454. [ 7.729553] adb_open
  455. [ 7.729614] adb_bind_config
  456. [ 7.741516] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
  457. [ 7.777557] HDCP: failed to load keys
  458. [ 7.802795] mms_ts 3-0048: could not find firmware file 'mms144_ts_rev32.fw'
  459. [ 7.803100] mms_ts 3-0048: Melfas MMS-series touch controller initialized
  460. [ 8.189331] EXT4-fs (mmcblk0p11): recovery complete
  461. [ 8.194274] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts:
  462. [ 8.194519] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
  463. [ 14.455413] EXT4-fs (mmcblk0p12): recovery complete
  464. [ 14.475463] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts:
  465. [ 14.475830] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
  466. [ 14.916931] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts:
  467. [ 14.917022] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
  468. [ 15.000244] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts:
  469. [ 15.000610] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
  470. [ 15.206939] EXT4-fs (mmcblk0p10): recovery complete
  471. [ 15.240417] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
  472. [ 15.240631] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
  473. [ 15.409545] SELinux: Context u:object_r:download_file:s0 is not valid (left unmapped).
  474. [ 19.198760] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
  475. [ 19.198944] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
  476. [ 19.553527] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1317000,Calib=1130000,margin=0
  477. [ 23.110595] DSSCOMP: dsscomp_early_suspend
  478. [ 23.111206] DSSCOMP: blanked screen
  479. [ 23.111419] [MODEM_IF] xmm6260_off()
  480. [ 23.405609] Disabling non-boot CPUs ...
  481. [ 23.416046] CPU1: shutdown
  482. [ 23.417449] Restarting system.
  483. [ 23.417785]
  484. [ 23.417968] Restarting Linux version 3.0.72-cyanogenmod-g496ddf4 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Nov 5 23:05:26 UTC 2013
  485. [ 23.417999]
  486.  
  487. No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!