API tools faq
paste
Advertisement
Guest User

runedebug

a guest
Aug 13th, 2014
112
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 70.96 KB | None | 0 0
raw download clone embed print report
  1.  
  2. ###### System info ######
  3. Linux version 3.12.19-2-ARCH (root@CS) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Thu May 22 15:35:00 UTC 2014
  4.  
  5. system time: Wed Dec 31 16:00:47 PST 1969
  6.  
  7. system load: 2.14 0.59 0.20 4/91 445
  8.  
  9. HW platform: RaspberryPi (01)
  10.  
  11. playerID: 016b5ae153411b8afe6cf7f7d91d75fec9
  12.  
  13.  
  14. ###### System load statistics (procinfo -H) ######
  15. Memory: Total Used Free Buffers
  16. RAM: 437.35MiB 135.73MiB 301.62MiB 12.76MiB
  17. Swap: 0.00B 0.00B 0.00B
  18.  
  19. Bootup: Wed Dec 31 16:00:00 1969 Load average: 2.14 0.59 0.20 3/92 450
  20.  
  21. user : 00:00:19.88 43.1% page in : 85386
  22. nice : 00:00:00.00 0.0% page out: 1656
  23. system: 00:00:12.18 26.4% page act: 5109
  24. IOwait: 00:00:12.84 27.8% page dea: 0
  25. hw irq: 00:00:00.35 0.8% page flt: 157745
  26. sw irq: 00:00:00.68 1.5% swap in : 0
  27. idle : 00:00:00.18 0.4% swap out: 0
  28. uptime: 00:00:47.38 context : 63894
  29.  
  30. irq 3: 36057 irq 75: 1
  31. irq 16: 0 irq 77: 11177
  32. irq 32: 117284 irq 79: 0
  33. irq 52: 0 irq 80: 0
  34. irq 65: 4 irq 84: 13400
  35. irq 66: 1
  36.  
  37. mmcblk0 2412r 1 mmcblk0p3 50r
  38. mmcblk0p1 87r mmcblk0p5 2213r
  39. mmcblk0p2 2r sda 114r 0w
  40.  
  41. eth0 TX 1.17KiB RX 1.11KiB wlan0 TX 65.67KiB RX 43.74KiB
  42. lo TX 109.53KiB RX 109.53KiB
  43.  
  44.  
  45. ###### Active processes (pstree) ######
  46. systemd-+-agetty
  47. |-avahi-daemon---avahi-daemon
  48. |-avahi-dnsconfd
  49. |-dbus-daemon
  50. |-debug_collector---sh---pstree
  51. |-devmon
  52. |-ifplugd---ifplugd.action---network-+-network---dhcpcd
  53. | `-network---cat
  54. |-mpd---4*[{mpd}]
  55. |-nginx---nginx
  56. |-nmbd
  57. |-php-fpm---3*[php-fpm]
  58. |-redis-server---2*[{redis-server}]
  59. |-refresh_nics
  60. |-rpc.idmapd
  61. |-rpc.statd
  62. |-rpcbind
  63. |-rune_PL_wrk
  64. |-rune_SY_wrk
  65. |-smbd---smbd
  66. |-sshd---sshd---bash
  67. |-systemd-udevd
  68. `-wpa_supplicant
  69.  
  70.  
  71. ###### Audio backend ######
  72. Advanced Linux Sound Architecture Driver Version k3.12.19-2-ARCH.
  73.  
  74. Card list: (/proc/asound/cards)
  75. --------------------------------------------------
  76. 0 [ALSA ]: bcm2835 - bcm2835 ALSA
  77. bcm2835 ALSA
  78. 1 [PCUSB ]: USB-Audio - Rotel PC-USB
  79. ROTEL Rotel PC-USB at usb-bcm2708_usb-1.2, high speed
  80.  
  81.  
  82. PLAYBACK devices: (aplay -l)
  83. --------------------------------------------------
  84. **** List of PLAYBACK Hardware Devices ****
  85. card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  86. Subdevices: 8/8
  87. Subdevice #0: subdevice #0
  88. Subdevice #1: subdevice #1
  89. Subdevice #2: subdevice #2
  90. Subdevice #3: subdevice #3
  91. Subdevice #4: subdevice #4
  92. Subdevice #5: subdevice #5
  93. Subdevice #6: subdevice #6
  94. Subdevice #7: subdevice #7
  95. card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  96. Subdevices: 1/1
  97. Subdevice #0: subdevice #0
  98. card 1: PCUSB [Rotel PC-USB], device 0: USB Audio [USB Audio]
  99. Subdevices: 1/1
  100. Subdevice #0: subdevice #0
  101.  
  102.  
  103. PCM devices: (aplay -L)
  104. --------------------------------------------------
  105. null
  106. Discard all samples (playback) or generate zero samples (capture)
  107. default:CARD=ALSA
  108. bcm2835 ALSA, bcm2835 ALSA
  109. Default Audio Device
  110. sysdefault:CARD=ALSA
  111. bcm2835 ALSA, bcm2835 ALSA
  112. Default Audio Device
  113. default:CARD=PCUSB
  114. Rotel PC-USB, USB Audio
  115. Default Audio Device
  116. sysdefault:CARD=PCUSB
  117. Rotel PC-USB, USB Audio
  118. Default Audio Device
  119. front:CARD=PCUSB,DEV=0
  120. Rotel PC-USB, USB Audio
  121. Front speakers
  122. surround40:CARD=PCUSB,DEV=0
  123. Rotel PC-USB, USB Audio
  124. 4.0 Surround output to Front and Rear speakers
  125. surround41:CARD=PCUSB,DEV=0
  126. Rotel PC-USB, USB Audio
  127. 4.1 Surround output to Front, Rear and Subwoofer speakers
  128. surround50:CARD=PCUSB,DEV=0
  129. Rotel PC-USB, USB Audio
  130. 5.0 Surround output to Front, Center and Rear speakers
  131. surround51:CARD=PCUSB,DEV=0
  132. Rotel PC-USB, USB Audio
  133. 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  134. surround71:CARD=PCUSB,DEV=0
  135. Rotel PC-USB, USB Audio
  136. 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  137. iec958:CARD=PCUSB,DEV=0
  138. Rotel PC-USB, USB Audio
  139. IEC958 (S/PDIF) Digital Audio Output
  140.  
  141.  
  142. Simple mixer controls: (amixer scontrols)
  143. --------------------------------------------------
  144. card 0:
  145. Simple mixer control 'PCM',0
  146.  
  147. card 1:
  148. Simple mixer control 'IEC958 In',0
  149.  
  150.  
  151. Mixer controls: (amixer controls)
  152. --------------------------------------------------
  153. card 0:
  154. numid=3,iface=MIXER,name='PCM Playback Route'
  155. numid=2,iface=MIXER,name='PCM Playback Switch'
  156. numid=1,iface=MIXER,name='PCM Playback Volume'
  157. numid=5,iface=PCM,name='IEC958 Playback Con Mask'
  158. numid=4,iface=PCM,name='IEC958 Playback Default'
  159.  
  160. card 1:
  161. numid=1,iface=MIXER,name='IEC958 In Playback Switch'
  162.  
  163.  
  164. ###### mpd.conf ######
  165. ###################################
  166. # Auto generated mpd.conf file
  167. # please DO NOT edit it manually!
  168. # Use RuneUI MPD config section
  169. ###################################
  170.  
  171. zeroconf_enabled "yes"
  172. zeroconf_name "runeaudio"
  173. bind_to_address "/run/mpd.sock"
  174. bind_to_address "any"
  175. port "6600"
  176. max_connections "20"
  177. user "mpd"
  178. group "audio"
  179. db_file "/var/lib/mpd/mpd.db"
  180. sticker_file "/var/lib/mpd/sticker.sql"
  181. pid_file "/var/run/mpd/pid"
  182. music_directory "/mnt/MPD"
  183. playlist_directory "/var/lib/mpd/playlists"
  184. follow_outside_symlinks "yes"
  185. follow_inside_symlinks "yes"
  186. auto_update "no"
  187. filesystem_charset "UTF-8"
  188. id3v1_encoding "UTF-8"
  189. volume_normalization "no"
  190. audio_buffer_size "4096"
  191. buffer_before_play "0%"
  192. gapless_mp3_playback "yes"
  193. mixer_type "disabled"
  194.  
  195. input {
  196. plugin "curl"
  197. }
  198.  
  199. decoder {
  200. plugin "ffmpeg"
  201. enabled "no"
  202. }
  203. state_file "/var/lib/mpd/mpdstate"
  204.  
  205. audio_output {
  206. name "bcm2835 ALSA"
  207. type "alsa"
  208. device "hw:0,0"
  209. auto_resample "no"
  210. auto_format "no"
  211. }
  212.  
  213. audio_output {
  214. name "Rotel PC-USB"
  215. type "alsa"
  216. device "hw:1,0"
  217. auto_resample "no"
  218. auto_format "no"
  219. enabled "yes"
  220. }
  221.  
  222.  
  223. ###### Kernel optimization parameters ######
  224. hardware platform: RaspberryPi
  225. current orionprofile: RuneAudio
  226.  
  227.  
  228. kernel scheduler for mmcblk0: [noop] deadline cfq
  229. /proc/sys/vm/swappiness: 60
  230. /proc/sys/kernel/sched_latency_ns: 6000000
  231. /proc/sys/kernel/sched_rt_period_us: 1000000
  232. /proc/sys/kernel/sched_rt_runtime_us: 950000
  233. /proc/sys/kernel/sched_autogroup_enabled: 1
  234. /proc/sys/kernel/sched_rr_timeslice_ms: 100
  235. /proc/sys/kernel/sched_min_granularity_ns: 750000
  236. /proc/sys/kernel/sched_wakeup_granularity_ns: 1000000
  237.  
  238.  
  239. ###### Kernel module snd_usb_audio settings ######
  240. Module = "snd_usb_audio"
  241.  
  242. Attributes:
  243. coresize = "116428"
  244. initsize = "0"
  245. initstate = "live"
  246. refcnt = "0"
  247. taint = ""
  248. uevent =
  249.  
  250. Parameters:
  251. autoclock = "Y"
  252. device_setup = "0,0,0,0,0,0,0,0"
  253. enable = "Y,Y,Y,Y,Y,Y,Y,Y"
  254. id = "(null),(null),(null),(null),(null),(null),(null),(null)"
  255. ignore_ctl_error = "N"
  256. index = "-1,-1,-1,-1,-1,-1,-1,-1"
  257. nrpacks = "3"
  258. pid = "-1,-1,-1,-1,-1,-1,-1,-1"
  259. vid = "-1,-1,-1,-1,-1,-1,-1,-1"
  260.  
  261. Sections:
  262. .ARM.exidx.exit.text= "0xbf254bac"
  263. .ARM.exidx.init.text= "0xbf254ba4"
  264. .ARM.exidx = "0xbf2572f0"
  265. .ARM.extab = "0xbf2572b4"
  266. .ARM.extab.init.text= "0xbf254b98"
  267. .bss = "0xbf25a36c"
  268. .data = "0xbf257814"
  269. .exit.text = "0xbf2521e8"
  270. .gnu.linkonce.this_module= "0xbf25a1f8"
  271. .init.text = "0xbf263000"
  272. .note.gnu.build-id = "0xbf2577f0"
  273. .rodata = "0xbf2521f8"
  274. .rodata.str1.4 = "0xbf254bb4"
  275. .strtab = "0xbf2682d8"
  276. .symtab = "0xbf263048"
  277. .text = "0xbf245000"
  278. __param = "0xbf257224"
  279.  
  280.  
  281. ###### Systemd active startup scripts (ls -lah /etc/systemd/system/multi-user.target.wants/) ######
  282. total 8.0K
  283. drwxr-xr-x 2 root root 4.0K Dec 31 1969 .
  284. drwxr-xr-x 4 root root 4.0K Dec 31 1969 ..
  285. lrwxrwxrwx 1 root root 44 Jul 22 2013 avahi-daemon.service -> /usr/lib/systemd/system/avahi-daemon.service
  286. lrwxrwxrwx 1 root root 46 Jul 22 2013 avahi-dnsconfd.service -> /usr/lib/systemd/system/avahi-dnsconfd.service
  287. lrwxrwxrwx 1 root root 40 Jul 1 2014 ifplugd@eth0.service -> /usr/lib/systemd/system/ifplugd@.service
  288. lrwxrwxrwx 1 root root 35 Dec 7 2013 mpd.service -> /usr/lib/systemd/system/mpd.service
  289. lrwxrwxrwx 1 root root 39 Jul 1 2014 netctl@eth0.service -> /etc/systemd/system/netctl@eth0.service
  290. lrwxrwxrwx 1 root root 40 Dec 31 1969 netctl@wlan0.service -> /etc/systemd/system/netctl@wlan0.service
  291. lrwxrwxrwx 1 root root 37 Nov 10 2013 nginx.service -> /usr/lib/systemd/system/nginx.service
  292. lrwxrwxrwx 1 root root 39 Nov 10 2013 php-fpm.service -> /usr/lib/systemd/system/php-fpm.service
  293. lrwxrwxrwx 1 root root 40 Feb 24 2014 rc-local.service -> /usr/lib/systemd/system/rc-local.service
  294. lrwxrwxrwx 1 root root 37 Mar 7 2014 redis.service -> /usr/lib/systemd/system/redis.service
  295. lrwxrwxrwx 1 root root 51 Apr 14 2014 remote-fs.target -> ../../../../usr/lib/systemd/system/remote-fs.target
  296. lrwxrwxrwx 1 root root 39 Dec 31 1969 rpcbind.service -> /usr/lib/systemd/system/rpcbind.service
  297. lrwxrwxrwx 1 root root 42 Dec 31 1969 rpc-idmapd.service -> /usr/lib/systemd/system/rpc-idmapd.service
  298. lrwxrwxrwx 1 root root 41 Dec 31 1969 rpc-statd.service -> /usr/lib/systemd/system/rpc-statd.service
  299. lrwxrwxrwx 1 root root 43 Feb 10 2014 rune_PL_wrk.service -> /usr/lib/systemd/system/rune_PL_wrk.service
  300. lrwxrwxrwx 1 root root 45 Feb 12 2014 rune_shutdown.service -> /usr/lib/systemd/system/rune_shutdown.service
  301. lrwxrwxrwx 1 root root 43 Jan 15 2014 rune_SY_wrk.service -> /usr/lib/systemd/system/rune_SY_wrk.service
  302. lrwxrwxrwx 1 root root 43 Jul 22 2013 sshdgenkeys.service -> /usr/lib/systemd/system/sshdgenkeys.service
  303. lrwxrwxrwx 1 root root 36 Jul 22 2013 sshd.service -> /usr/lib/systemd/system/sshd.service
  304.  
  305.  
  306. ###### Filesystem mounts ######
  307. rootfs / rootfs rw 0 0
  308. /dev/root / ext4 rw,noatime,nouser_xattr,errors=remount-ro,data=ordered 0 0
  309. devtmpfs /dev devtmpfs rw,relatime,size=219728k,nr_inodes=54932,mode=755 0 0
  310. proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
  311. sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
  312. securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
  313. tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
  314. devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
  315. tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
  316. tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
  317. cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
  318. cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
  319. cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct,cpu 0 0
  320. cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
  321. cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
  322. cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
  323. cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
  324. systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=21,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
  325. debugfs /sys/kernel/debug debugfs rw,relatime 0 0
  326. mqueue /dev/mqueue mqueue rw,relatime 0 0
  327. tmpfs /tmp tmpfs rw 0 0
  328. configfs /sys/kernel/config configfs rw,relatime 0 0
  329. logs /var/log tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
  330. Ramdisk /run/shm tmpfs rw,nosuid,nodev,noexec,relatime,size=262144k 0 0
  331. rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
  332. rune-logs /var/log/runeaudio tmpfs rw,nosuid,nodev,noatime,size=20480k 0 0
  333. /dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 0
  334. fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
  335.  
  336.  
  337. ###### Filesystem mounts - free space (df -h) ######
  338. Filesystem Size Used Avail Use% Mounted on
  339. /dev/root 1.7G 1.3G 265M 83% /
  340. devtmpfs 215M 0 215M 0% /dev
  341. tmpfs 219M 0 219M 0% /dev/shm
  342. tmpfs 219M 360K 219M 1% /run
  343. tmpfs 219M 0 219M 0% /sys/fs/cgroup
  344. tmpfs 219M 0 219M 0% /tmp
  345. logs 5.0M 24K 5.0M 1% /var/log
  346. Ramdisk 256M 0 256M 0% /run/shm
  347. rune-logs 20M 20K 20M 1% /var/log/runeaudio
  348. /dev/mmcblk0p1 90M 26M 64M 29% /boot
  349.  
  350.  
  351. ###### Loaded kernel modules ######
  352. Module Size Used by
  353. fuse 76629 1
  354. arc4 1716 2
  355. rt2800usb 17421 0
  356. rt2800lib 80026 1 rt2800usb
  357. crc_ccitt 1565 1 rt2800lib
  358. rt2x00usb 11060 1 rt2800usb
  359. snd_soc_wm8804 7767 0
  360. rt2x00lib 43777 3 rt2x00usb,rt2800lib,rt2800usb
  361. mac80211 478047 3 rt2x00lib,rt2x00usb,rt2800lib
  362. snd_usb_audio 116428 0
  363. cfg80211 430515 2 mac80211,rt2x00lib
  364. snd_usbmidi_lib 19121 1 snd_usb_audio
  365. evdev 10153 0
  366. snd_hwdep 5859 1 snd_usb_audio
  367. snd_rawmidi 21382 1 snd_usbmidi_lib
  368. snd_soc_bcm2708_i2s 5657 0
  369. snd_seq_device 6493 1 snd_rawmidi
  370. regmap_mmio 2838 1 snd_soc_bcm2708_i2s
  371. leds_gpio 2142 0
  372. snd_soc_core 152794 2 snd_soc_wm8804,snd_soc_bcm2708_i2s
  373. led_class 4162 2 leds_gpio,rt2x00lib
  374. snd_compress 8219 1 snd_soc_core
  375. i2c_bcm2708 4161 0
  376. spi_bcm2708 4844 0
  377. snd_pcm_dmaengine 5533 1 snd_soc_core
  378. bcm2708_dmaengine 5224 0
  379. regmap_spi 1941 2 snd_soc_wm8804,snd_soc_core
  380. virt_dma 2309 1 bcm2708_dmaengine
  381. regmap_i2c 1685 2 snd_soc_wm8804,snd_soc_core
  382. snd_bcm2835 18168 0
  383. snd_pcm 79264 4 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_pcm_dmaengine
  384. snd_page_alloc 5192 1 snd_pcm
  385. snd_timer 20362 1 snd_pcm
  386. snd 60119 10 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_compress
  387. bcm2708_rng 1044 0
  388. rng_core 4159 1 bcm2708_rng
  389. nfs 205790 0
  390. lockd 64174 1 nfs
  391. sunrpc 237524 3 nfs,lockd
  392.  
  393.  
  394. ###### Network listening sockets (netstat -lnp) ######
  395. Active Internet connections (only servers)
  396. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  397. tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 358/smbd
  398. tcp 0 0 0.0.0.0:6600 0.0.0.0:* LISTEN 398/mpd
  399. tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 358/smbd
  400. tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 290/redis-server 12
  401. tcp 0 0 0.0.0.0:58348 0.0.0.0:* LISTEN 312/rpc.statd
  402. tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 279/rpcbind
  403. tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 294/nginx: master p
  404. tcp 0 0 0.0.0.0:81 0.0.0.0:* LISTEN 294/nginx: master p
  405. tcp 0 0 0.0.0.0:82 0.0.0.0:* LISTEN 294/nginx: master p
  406. tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 266/sshd
  407. udp 0 0 0.0.0.0:68 0.0.0.0:* 207/dhcpcd
  408. udp 0 0 0.0.0.0:868 0.0.0.0:* 279/rpcbind
  409. udp 0 0 0.0.0.0:111 0.0.0.0:* 279/rpcbind
  410. udp 0 0 192.168.1.255:137 0.0.0.0:* 365/nmbd
  411. udp 0 0 192.168.1.222:137 0.0.0.0:* 365/nmbd
  412. udp 0 0 0.0.0.0:137 0.0.0.0:* 365/nmbd
  413. udp 0 0 192.168.1.255:138 0.0.0.0:* 365/nmbd
  414. udp 0 0 192.168.1.222:138 0.0.0.0:* 365/nmbd
  415. udp 0 0 0.0.0.0:138 0.0.0.0:* 365/nmbd
  416. udp 0 0 0.0.0.0:35986 0.0.0.0:* 312/rpc.statd
  417. udp 0 0 127.0.0.1:914 0.0.0.0:* 312/rpc.statd
  418. udp 0 0 0.0.0.0:35733 0.0.0.0:* 119/avahi-daemon: r
  419. udp 0 0 0.0.0.0:5353 0.0.0.0:* 119/avahi-daemon: r
  420. Active UNIX domain sockets (only servers)
  421. Proto RefCnt Flags Type State I-Node PID/Program name Path
  422. unix 2 [ ACC ] STREAM LISTENING 4882 1/init /var/run/avahi-daemon/socket
  423. unix 2 [ ACC ] STREAM LISTENING 4934 1/init /run/dbus/system_bus_socket
  424. unix 2 [ ACC ] STREAM LISTENING 6496 279/rpcbind /var/run/rpcbind.sock
  425. unix 2 [ ACC ] STREAM LISTENING 2234 1/init /run/systemd/private
  426. unix 2 [ ACC ] STREAM LISTENING 7623 398/mpd /run/mpd.sock
  427. unix 2 [ ACC ] SEQPACKET LISTENING 2247 1/init /run/udev/control
  428. unix 2 [ ACC ] STREAM LISTENING 7122 365/nmbd /var/run/samba/nmbd/unexpected
  429. unix 2 [ ACC ] STREAM LISTENING 6882 281/php-fpm: master /var/run/php-display.sock
  430. unix 2 [ ACC ] STREAM LISTENING 6885 281/php-fpm: master /var/run/php-db.sock
  431. unix 2 [ ACC ] STREAM LISTENING 6888 281/php-fpm: master /var/run/php-command.sock
  432.  
  433.  
  434. ###### Network established sockets (netstat -np) ######
  435. Active Internet connections (w/o servers)
  436. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  437. tcp 0 0 127.0.0.1:6379 127.0.0.1:54987 ESTABLISHED 290/redis-server 12
  438. tcp 0 0 192.168.1.222:48371 195.24.232.205:80 TIME_WAIT -
  439. tcp 0 0 192.168.1.222:80 192.168.1.107:58446 TIME_WAIT -
  440. tcp 0 0 127.0.0.1:82 127.0.0.1:37045 TIME_WAIT -
  441. tcp 0 0 127.0.0.1:57419 127.0.0.1:6600 TIME_WAIT -
  442. tcp 0 0 192.168.1.222:80 192.168.1.107:58467 TIME_WAIT -
  443. tcp 0 0 127.0.0.1:80 127.0.0.1:32953 TIME_WAIT -
  444. tcp 0 0 127.0.0.1:80 127.0.0.1:32962 TIME_WAIT -
  445. tcp 0 0 127.0.0.1:54977 127.0.0.1:6379 TIME_WAIT -
  446. tcp 6 0 192.168.1.222:80 192.168.1.107:58463 ESTABLISHED 295/nginx: worker p
  447. tcp 0 0 127.0.0.1:6379 127.0.0.1:54825 ESTABLISHED 290/redis-server 12
  448. tcp 0 0 127.0.0.1:54987 127.0.0.1:6379 ESTABLISHED 403/php
  449. tcp 0 0 127.0.0.1:54880 127.0.0.1:6379 TIME_WAIT -
  450. tcp 0 0 192.168.1.222:80 192.168.1.107:58447 TIME_WAIT -
  451. tcp 0 0 192.168.1.222:22 192.168.1.107:58442 ESTABLISHED 372/sshd: root@pts/
  452. tcp 0 0 127.0.0.1:81 127.0.0.1:51428 TIME_WAIT -
  453. tcp 0 0 127.0.0.1:80 127.0.0.1:32948 TIME_WAIT -
  454. tcp 0 0 127.0.0.1:54936 127.0.0.1:6379 TIME_WAIT -
  455. tcp 0 0 192.168.1.222:59369 78.46.19.144:80 TIME_WAIT -
  456. tcp 0 0 192.168.1.222:80 192.168.1.107:58454 TIME_WAIT -
  457. tcp 0 0 192.168.1.222:80 192.168.1.107:58468 TIME_WAIT -
  458. tcp 0 0 127.0.0.1:54877 127.0.0.1:6379 TIME_WAIT -
  459. tcp 0 0 192.168.1.222:80 192.168.1.107:58449 TIME_WAIT -
  460. tcp 0 0 127.0.0.1:54882 127.0.0.1:6379 TIME_WAIT -
  461. tcp 0 0 127.0.0.1:6379 127.0.0.1:54986 ESTABLISHED 290/redis-server 12
  462. tcp 0 0 127.0.0.1:80 127.0.0.1:32891 TIME_WAIT -
  463. tcp 0 0 192.168.1.222:80 192.168.1.107:58450 TIME_WAIT -
  464. tcp 0 0 127.0.0.1:54878 127.0.0.1:6379 TIME_WAIT -
  465. tcp 0 0 127.0.0.1:80 127.0.0.1:32837 TIME_WAIT -
  466. tcp 0 0 192.168.1.222:80 192.168.1.107:58453 TIME_WAIT -
  467. tcp 0 0 192.168.1.222:80 192.168.1.107:58460 TIME_WAIT -
  468. tcp 6 0 192.168.1.222:80 192.168.1.107:58466 ESTABLISHED 295/nginx: worker p
  469. tcp 0 0 192.168.1.222:80 192.168.1.107:58443 TIME_WAIT -
  470. tcp 0 0 127.0.0.1:54964 127.0.0.1:6379 TIME_WAIT -
  471. tcp 0 0 192.168.1.222:80 192.168.1.107:58458 TIME_WAIT -
  472. tcp 0 0 192.168.1.222:80 192.168.1.107:58448 TIME_WAIT -
  473. tcp 0 0 127.0.0.1:54883 127.0.0.1:6379 TIME_WAIT -
  474. tcp 0 0 127.0.0.1:81 127.0.0.1:51355 TIME_WAIT -
  475. tcp 0 0 192.168.1.222:80 192.168.1.107:58452 TIME_WAIT -
  476. tcp 0 0 192.168.1.222:80 192.168.1.107:58456 TIME_WAIT -
  477. tcp 0 0 127.0.0.1:54827 127.0.0.1:6379 ESTABLISHED 270/php
  478. tcp 0 0 192.168.1.222:80 192.168.1.107:58445 TIME_WAIT -
  479. tcp 0 0 192.168.1.222:80 192.168.1.107:58455 TIME_WAIT -
  480. tcp 0 0 192.168.1.222:80 192.168.1.107:58470 TIME_WAIT -
  481. tcp 0 0 192.168.1.222:80 192.168.1.107:58459 TIME_WAIT -
  482. tcp 0 0 192.168.1.222:80 192.168.1.107:58472 TIME_WAIT -
  483. tcp 0 0 127.0.0.1:54825 127.0.0.1:6379 ESTABLISHED 273/php
  484. tcp 0 0 192.168.1.222:48362 195.24.232.205:80 TIME_WAIT -
  485. tcp 0 0 127.0.0.1:54884 127.0.0.1:6379 TIME_WAIT -
  486. tcp 0 0 192.168.1.222:80 192.168.1.107:58457 TIME_WAIT -
  487. tcp 0 0 192.168.1.222:80 192.168.1.107:58444 TIME_WAIT -
  488. tcp 0 0 192.168.1.222:80 192.168.1.107:58471 TIME_WAIT -
  489. tcp 0 0 192.168.1.222:80 192.168.1.107:58461 TIME_WAIT -
  490. tcp 0 0 127.0.0.1:6379 127.0.0.1:54827 ESTABLISHED 290/redis-server 12
  491. tcp 0 0 127.0.0.1:81 127.0.0.1:51442 TIME_WAIT -
  492. tcp 0 0 127.0.0.1:54881 127.0.0.1:6379 TIME_WAIT -
  493. tcp 6 0 192.168.1.222:80 192.168.1.107:58464 ESTABLISHED 295/nginx: worker p
  494. tcp 0 0 192.168.1.222:80 192.168.1.107:58451 TIME_WAIT -
  495. tcp 0 0 192.168.1.222:80 192.168.1.107:58465 TIME_WAIT -
  496. tcp 0 0 127.0.0.1:32829 127.0.0.1:80 TIME_WAIT -
  497. tcp 0 0 192.168.1.222:80 192.168.1.107:58469 TIME_WAIT -
  498. tcp 0 0 127.0.0.1:54986 127.0.0.1:6379 ESTABLISHED 416/php
  499. tcp 0 0 192.168.1.222:80 192.168.1.107:58462 TIME_WAIT -
  500. Active UNIX domain sockets (w/o servers)
  501. Proto RefCnt Flags Type State I-Node PID/Program name Path
  502. unix 2 [ ] DGRAM 6062 162/wpa_supplicant /run/wpa_supplicant/wlan0
  503. unix 2 [ ] DGRAM 2232 1/init /run/systemd/notify
  504. unix 2 [ ] DGRAM 2250 1/init /run/systemd/shutdownd
  505. unix 3 [ ] STREAM CONNECTED 6805 294/nginx: master p
  506. unix 3 [ ] STREAM CONNECTED 5235 128/rpc.idmapd
  507. unix 3 [ ] STREAM CONNECTED 5328 129/dbus-daemon
  508. unix 3 [ ] STREAM CONNECTED 5098 121/avahi-dnsconfd
  509. unix 3 [ ] STREAM CONNECTED 5331 129/dbus-daemon /run/dbus/system_bus_socket
  510. unix 3 [ ] STREAM CONNECTED 6808 294/nginx: master p
  511. unix 3 [ ] STREAM CONNECTED 5330 129/dbus-daemon /run/dbus/system_bus_socket
  512. unix 3 [ ] STREAM CONNECTED 7918 129/dbus-daemon /run/dbus/system_bus_socket
  513. unix 3 [ ] STREAM CONNECTED 5103 119/avahi-daemon: r
  514. unix 3 [ ] STREAM CONNECTED 6809 294/nginx: master p
  515. unix 3 [ ] DGRAM 3243 86/systemd-udevd
  516. unix 3 [ ] STREAM CONNECTED 5104 124/avahi-daemon: c
  517. unix 3 [ ] STREAM CONNECTED 6880 281/php-fpm: master
  518. unix 3 [ ] DGRAM 3242 86/systemd-udevd
  519. unix 3 [ ] STREAM CONNECTED 7953 398/mpd /run/mpd.sock
  520. unix 3 [ ] STREAM CONNECTED 7128 358/smbd
  521. unix 3 [ ] STREAM CONNECTED 6881 281/php-fpm: master
  522. unix 3 [ ] STREAM CONNECTED 7952 273/php
  523. unix 3 [ ] STREAM CONNECTED 5150 119/avahi-daemon: r
  524. unix 3 [ ] STREAM CONNECTED 5234 128/rpc.idmapd
  525. unix 3 [ ] STREAM CONNECTED 7129 129/dbus-daemon /run/dbus/system_bus_socket
  526. unix 3 [ ] STREAM CONNECTED 6804 294/nginx: master p
  527. unix 3 [ ] STREAM CONNECTED 5329 129/dbus-daemon
  528. unix 3 [ ] STREAM CONNECTED 7917 398/mpd
  529. unix 3 [ ] STREAM CONNECTED 5728 119/avahi-daemon: r /var/run/avahi-daemon/socket
  530. unix 3 [ ] STREAM CONNECTED 5283 1/init
  531.  
  532.  
  533. ###### Network interfaces (ip addr) ######
  534. 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default
  535. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  536. inet 127.0.0.1/8 scope host lo
  537. valid_lft forever preferred_lft forever
  538. 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
  539. link/ether b8:27:eb:24:27:b2 brd ff:ff:ff:ff:ff:ff
  540. 3: wlan0: mtu 1500 qdisc mq state UP group default qlen 1000
  541. link/ether 00:0f:55:a8:93:39 brd ff:ff:ff:ff:ff:ff
  542. inet 192.168.1.222/24 brd 192.168.1.255 scope global wlan0
  543. valid_lft forever preferred_lft forever
  544.  
  545.  
  546. ###### Network interfaces (ifconfig) ######
  547. lo: flags=73 mtu 65536
  548. inet 127.0.0.1 netmask 255.0.0.0
  549. loop txqueuelen 0 (Local Loopback)
  550. RX packets 3145 bytes 158989 (155.2 KiB)
  551. RX errors 0 dropped 0 overruns 0 frame 0
  552. TX packets 3145 bytes 158989 (155.2 KiB)
  553. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  554.  
  555. wlan0: flags=4163 mtu 1500
  556. inet 192.168.1.222 netmask 255.255.255.0 broadcast 192.168.1.255
  557. ether 00:0f:55:a8:93:39 txqueuelen 1000 (Ethernet)
  558. RX packets 515 bytes 52159 (50.9 KiB)
  559. RX errors 0 dropped 0 overruns 0 frame 0
  560. TX packets 322 bytes 73477 (71.7 KiB)
  561. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  562.  
  563.  
  564. ###### Network netctl profiles (netctl list) ######
  565. wlan0-PPWAN.cmh
  566. * wlan0
  567. eth0
  568. eth0.orig
  569. eth0.cmh
  570. wlan0.orig
  571.  
  572. wlan0-PPWAN.cmh netctl status
  573. --------------------------------------------------------
  574. ● netctl@wlan0\x2dPPWAN.cmh.service - Networking for netctl profile wlan0-PPWAN.cmh
  575. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  576. Active: inactive (dead)
  577. Docs: man:netctl.profile(5)
  578.  
  579. wlan0-PPWAN.cmh netctl profile
  580. --------------------------------------------------------
  581. Description='A simple WPA encrypted wireless connection using a static IP'
  582. Interface=wlan0
  583. Connection=wireless
  584. Security=wpa
  585. ESSID='PPWAN'
  586. Key='h'
  587. IP=static
  588. Address='192.168.1.222/24'
  589. Gateway='192.168.1.1'
  590. DNS=('4.2.2.1')
  591. # Uncomment this if your ssid is hidden
  592. #
  593. Hidden=yes
  594.  
  595. wlan0 netctl status
  596. --------------------------------------------------------
  597. ● netctl@wlan0.service - A simple WPA encrypted wireless connection using a static IP
  598. Loaded: loaded (/etc/systemd/system/netctl@wlan0.service; enabled)
  599. Active: active (exited) since Wed 1969-12-31 16:00:22 PST; 56s ago
  600. Docs: man:netctl.profile(5)
  601. Process: 150 ExecStart=/usr/lib/network/network start %I (code=exited, status=0/SUCCESS)
  602. Main PID: 150 (code=exited, status=0/SUCCESS)
  603.  
  604. wlan0 netctl profile
  605. --------------------------------------------------------
  606. Description='A simple WPA encrypted wireless connection using a static IP'
  607. Interface=wlan0
  608. Connection=wireless
  609. Security=wpa
  610. ESSID='PPWAN'
  611. Key='h'
  612. IP=static
  613. Address='192.168.1.222/24'
  614. Gateway='192.168.1.1'
  615. DNS=('4.2.2.1')
  616. # Uncomment this if your ssid is hidden
  617. #
  618. Hidden=yes
  619.  
  620. eth0 netctl status
  621. --------------------------------------------------------
  622. ● netctl@eth0.service - eth0 dhcp connection
  623. Loaded: loaded (/etc/systemd/system/netctl@eth0.service; enabled)
  624. Active: failed (Result: exit-code) since Wed 1969-12-31 16:00:16 PST; 1min 5s ago
  625. Docs: man:netctl.profile(5)
  626. Process: 120 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
  627. Main PID: 120 (code=exited, status=1/FAILURE)
  628.  
  629. eth0 netctl profile
  630. --------------------------------------------------------
  631. Description='eth0 static configuration'
  632. Interface=eth0
  633. Connection=ethernet
  634. IP=static
  635. Address='192.168.1.221/24'
  636. Gateway='192.168.1.1'
  637. DNS=('4.2.2.1')
  638. SkipNoCarrier=yes
  639.  
  640. eth0.orig netctl status
  641. --------------------------------------------------------
  642. ● netctl@eth0.orig.service - Networking for netctl profile eth0.orig
  643. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  644. Active: inactive (dead)
  645. Docs: man:netctl.profile(5)
  646.  
  647. eth0.orig netctl profile
  648. --------------------------------------------------------
  649. Description='eth0 dhcp connection'
  650. Interface=eth0
  651. Connection=ethernet
  652. ForceConnect=yes
  653. SkipNoCarrier=yes
  654. IP=dhcp
  655.  
  656. eth0.cmh netctl status
  657. --------------------------------------------------------
  658. ● netctl@eth0.cmh.service - Networking for netctl profile eth0.cmh
  659. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  660. Active: inactive (dead)
  661. Docs: man:netctl.profile(5)
  662.  
  663. eth0.cmh netctl profile
  664. --------------------------------------------------------
  665. Description='eth0 static configuration'
  666. Interface=eth0
  667. Connection=ethernet
  668. IP=static
  669. Address='192.168.1.221/24'
  670. Gateway='192.168.1.1'
  671. DNS=('4.2.2.1')
  672. SkipNoCarrier=yes
  673.  
  674. wlan0.orig netctl status
  675. --------------------------------------------------------
  676. ● netctl@wlan0.orig.service - Networking for netctl profile wlan0.orig
  677. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  678. Active: inactive (dead)
  679. Docs: man:netctl.profile(5)
  680.  
  681. wlan0.orig netctl profile
  682. --------------------------------------------------------
  683. Description='wlan0 connection'
  684. Interface=wlan0
  685. ForceConnect=yes
  686. SkipNoCarrier=yes
  687. Connection=wireless
  688. Security=wpa-config
  689. WPAConfigFile='/etc/wpa_supplicant/wpa_supplicant.conf'
  690. IP=dhcp
  691.  
  692.  
  693. ###### Network wifi status (iwconfig) ######
  694. lo no wireless extensions.
  695.  
  696. eth0 no wireless extensions.
  697.  
  698. wlan0 IEEE 802.11bgn ESSID:"PPWAN"
  699. Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:8C:34:AC:63
  700. Bit Rate=5.5 Mb/s Tx-Power=20 dBm
  701. Retry long limit:7 RTS thr:off Fragment thr:off
  702. Encryption key:off
  703. Power Management:on
  704. Link Quality=29/70 Signal level=-81 dBm
  705. Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
  706. Tx excessive retries:21 Invalid misc:97 Missed beacon:0
  707.  
  708.  
  709. ###### Kernel status (dmesg) ######
  710. [ 0.000000] Booting Linux on physical CPU 0x0
  711. [ 0.000000] Initializing cgroup subsys cpuset
  712. [ 0.000000] Initializing cgroup subsys cpu
  713. [ 0.000000] Initializing cgroup subsys cpuacct
  714. [ 0.000000] Linux version 3.12.19-2-ARCH (root@CS) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Thu May 22 15:35:00 UTC 2014
  715. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  716. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  717. [ 0.000000] Machine: BCM2708
  718. [ 0.000000] cma: CMA: reserved 8 MiB at 1b800000
  719. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  720. [ 0.000000] On node 0 totalpages: 114688
  721. [ 0.000000] free_area_init_node: node 0, pgdat c064f190, node_mem_map c06e2000
  722. [ 0.000000] Normal zone: 896 pages used for memmap
  723. [ 0.000000] Normal zone: 0 pages reserved
  724. [ 0.000000] Normal zone: 114688 pages, LIFO batch:31
  725. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  726. [ 0.000000] pcpu-alloc: [0] 0
  727. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  728. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0x492427b2 smsc95xx.macaddr=B8:27:EB:24:27:B2 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 ipv6.disable=1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 dwc_otg.fiq_split_enable=0 dwc_otg.fiq_fix_enable=0 console=tty1 root=/dev/mmcblk0p5 rootfstype=ext4 elevator=noop usbcore.old_scheme_first=1 coherent_pool=6M rootwait
  729. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  730. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  731. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  732. [ 0.000000] Memory: 439456K/458752K available (4392K kernel code, 282K rwdata, 1564K rodata, 201K init, 562K bss, 19296K reserved)
  733. [ 0.000000] Virtual kernel memory layout:
  734. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  735. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  736. vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  737. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  738. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  739. .text : 0xc0008000 - 0xc05d9550 (5958 kB)
  740. .init : 0xc05da000 - 0xc060c504 ( 202 kB)
  741. .data : 0xc060e000 - 0xc06548cc ( 283 kB)
  742. .bss : 0xc06548cc - 0xc06e1250 ( 563 kB)
  743. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  744. [ 0.000000] Preemptible hierarchical RCU implementation.
  745. [ 0.000000] NR_IRQS:394
  746. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  747. [ 0.000000] Switching to timer-based delay loop
  748. [ 0.000000] Console: colour dummy device 80x30
  749. [ 0.000000] console [tty1] enabled
  750. [ 0.000616] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
  751. [ 0.000641] pid_max: default: 32768 minimum: 301
  752. [ 0.000961] Mount-cache hash table entries: 512
  753. [ 0.001885] Initializing cgroup subsys memory
  754. [ 0.001971] Initializing cgroup subsys devices
  755. [ 0.001990] Initializing cgroup subsys freezer
  756. [ 0.002005] Initializing cgroup subsys blkio
  757. [ 0.002018] Initializing cgroup subsys perf_event
  758. [ 0.002222] CPU: Testing write buffer coherency: ok
  759. [ 0.002652] Setting up static identity map for 0xc042dd80 - 0xc042ddb8
  760. [ 0.004891] devtmpfs: initialized
  761. [ 0.022828] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  762. [ 0.025045] NET: Registered protocol family 16
  763. [ 0.033862] DMA: preallocated 6144 KiB pool for atomic coherent allocations
  764. [ 0.035295] bcm2708.uart_clock = 0
  765. [ 0.037121] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  766. [ 0.037144] hw-breakpoint: maximum watchpoint size is 4 bytes.
  767. [ 0.037159] mailbox: Broadcom VideoCore Mailbox driver
  768. [ 0.037238] bcm2708_vcio: mailbox at f200b880
  769. [ 0.037342] bcm_power: Broadcom power driver
  770. [ 0.037364] bcm_power_open() -> 0
  771. [ 0.037375] bcm_power_request(0, 8)
  772. [ 0.538086] bcm_mailbox_read -> 00000080, 0
  773. [ 0.538106] bcm_power_request -> 0
  774. [ 0.538349] Serial: AMBA PL011 UART driver
  775. [ 0.538524] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  776. [ 0.563498] bio: create slab at 0
  777. [ 0.564767] SCSI subsystem initialized
  778. [ 0.565170] usbcore: registered new interface driver usbfs
  779. [ 0.565264] usbcore: registered new interface driver hub
  780. [ 0.565537] usbcore: registered new device driver usb
  781. [ 0.567823] Switched to clocksource stc
  782. [ 0.585785] FS-Cache: Loaded
  783. [ 0.586139] CacheFiles: Loaded
  784. [ 0.599545] NET: Registered protocol family 2
  785. [ 0.600710] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  786. [ 0.600921] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  787. [ 0.601025] TCP: Hash tables configured (established 4096 bind 4096)
  788. [ 0.601112] TCP: reno registered
  789. [ 0.601138] UDP hash table entries: 256 (order: 0, 4096 bytes)
  790. [ 0.601171] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  791. [ 0.601631] NET: Registered protocol family 1
  792. [ 0.603681] bcm2708_dma: DMA manager at f2007000
  793. [ 0.603811] bcm2708_gpio: bcm2708_gpio_probe c061b800
  794. [ 0.604373] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  795. [ 0.777181] VFS: Disk quotas dquot_6.5.2
  796. [ 0.777498] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  797. [ 0.781164] aufs 3.12.x-20140512
  798. [ 0.781223] msgmni has been set to 874
  799. [ 0.784313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  800. [ 0.784685] io scheduler noop registered (default)
  801. [ 0.784708] io scheduler deadline registered
  802. [ 0.785080] io scheduler cfq registered
  803. [ 0.786200] BCM2708FB: allocated DMA memory 5be00000
  804. [ 0.786270] BCM2708FB: allocated DMA channel 0 @ f2007000
  805. [ 0.793018] Console: switching to colour frame buffer device 82x26
  806. [ 0.795734] uart-pl011 dev:f1: no DMA platform data
  807. [ 0.796441] vc-cma: Videocore CMA driver
  808. [ 0.796461] vc-cma: vc_cma_base = 0x00000000
  809. [ 0.796474] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  810. [ 0.796485] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  811. [ 0.806683] brd: module loaded
  812. [ 0.812342] loop: module loaded
  813. [ 0.812656] vchiq: vchiq_init_state: slot_zero = 0xdb800000, is_master = 0
  814. [ 0.813800] Loading iSCSI transport class v2.0-870.
  815. [ 0.815178] usbcore: registered new interface driver ax88179_178a
  816. [ 0.815311] usbcore: registered new interface driver smsc95xx
  817. [ 0.815503] usbcore: registered new interface driver cdc_ncm
  818. [ 0.815522] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  819. [ 1.015710] Core Release: 2.80a
  820. [ 1.015743] Setting default values for core params
  821. [ 1.015789] Finished setting default values for core params
  822. [ 1.215907] Using Buffer DMA mode
  823. [ 1.215931] Periodic Transfer Interrupt Enhancement - disabled
  824. [ 1.215945] Multiprocessor Interrupt Enhancement - disabled
  825. [ 1.215959] OTG VER PARAM: 0, OTG VER FLAG: 0
  826. [ 1.215977] Dedicated Tx FIFOs mode
  827. [ 1.216577] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdbe14000 dma = 0x5be14000 len=9024
  828. [ 1.216615] FIQ FSM acceleration enabled for :
  829. Non-periodic Split Transactions
  830. Periodic Split Transactions
  831. High-Speed Isochronous Endpoints
  832. [ 1.216642] dwc_otg: Microframe scheduler enabled
  833. [ 1.216763] WARN::hcd_init:473: FIQ at 0xc032d988
  834. [ 1.216783] WARN::hcd_init:474: FIQ ASM at 0xc032dc3c length 36
  835. [ 1.216815] WARN::hcd_init:500: MPHI regs_base at 0xdc806000
  836. [ 1.216907] dwc_otg bcm2708_usb: DWC OTG Controller
  837. [ 1.217009] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  838. [ 1.217077] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  839. [ 1.217117] Init: Port Power? op_state=1
  840. [ 1.217128] Init: Power Port (0)
  841. [ 1.217465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  842. [ 1.217492] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  843. [ 1.217510] usb usb1: Product: DWC OTG Controller
  844. [ 1.217526] usb usb1: Manufacturer: Linux 3.12.19-2-ARCH dwc_otg_hcd
  845. [ 1.217542] usb usb1: SerialNumber: bcm2708_usb
  846. [ 1.218356] hub 1-0:1.0: USB hub found
  847. [ 1.218448] hub 1-0:1.0: 1 port detected
  848. [ 1.219060] dwc_otg: FIQ enabled
  849. [ 1.219081] dwc_otg: NAK holdoff enabled
  850. [ 1.219092] dwc_otg: FIQ split-transaction FSM enabled
  851. [ 1.219114] Module dwc_common_port init
  852. [ 1.219556] usbcore: registered new interface driver usb-storage
  853. [ 1.220006] mousedev: PS/2 mouse device common for all mice
  854. [ 1.221030] device-mapper: uevent: version 1.0.3
  855. [ 1.221559] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
  856. [ 1.222276] device-mapper: multipath: version 1.6.0 loaded
  857. [ 1.222304] device-mapper: multipath round-robin: version 1.0.0 loaded
  858. [ 1.222319] device-mapper: multipath queue-length: version 0.1.0 loaded
  859. [ 1.222332] device-mapper: multipath service-time: version 0.2.0 loaded
  860. [ 1.222419] sdhci: Secure Digital Host Controller Interface driver
  861. [ 1.222434] sdhci: Copyright(c) Pierre Ossman
  862. [ 1.222518] sdhci: Enable low-latency mode
  863. [ 1.251883] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  864. [ 1.252133] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  865. [ 1.252232] sdhci-pltfm: SDHCI platform and OF driver helper
  866. [ 1.252408] hidraw: raw HID events driver (C) Jiri Kosina
  867. [ 1.252930] usbcore: registered new interface driver usbhid
  868. [ 1.252950] usbhid: USB HID core driver
  869. [ 1.253730] zram: Created 1 device(s) ...
  870. [ 1.254347] TCP: cubic registered
  871. [ 1.254375] Initializing XFRM netlink socket
  872. [ 1.254416] NET: Registered protocol family 17
  873. [ 1.254546] Key type dns_resolver registered
  874. [ 1.261668] registered taskstats version 1
  875. [ 1.262978] Waiting for root device /dev/mmcblk0p5...
  876. [ 1.318050] mmc0: read SD Status register (SSR) after 2 attempts
  877. [ 1.323361] mmc0: new high speed SDHC card at address 0007
  878. [ 1.324055] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
  879. [ 1.328232] mmcblk0: p1 p2 < p5 > p3
  880. [ 1.418069] Indeed it is in host mode hprt0 = 00021501
  881. [ 1.594951] usb 1-1: new high-speed USB device number 2 using dwc_otg
  882. [ 1.606346] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  883. [ 1.606375] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  884. [ 1.607201] hub 1-1:1.0: USB hub found
  885. [ 1.607360] hub 1-1:1.0: 5 ports detected
  886. [ 1.880992] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  887. [ 1.892346] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  888. [ 1.892375] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  889. [ 1.895308] smsc95xx v1.0.4
  890. [ 1.937111] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:24:27:b2
  891. [ 2.010041] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  892. [ 2.029874] usb 1-1.2: New USB device found, idVendor=278b, idProduct=3001
  893. [ 2.029907] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  894. [ 2.029926] usb 1-1.2: Product: Rotel PC-USB
  895. [ 2.029941] usb 1-1.2: Manufacturer: ROTEL
  896. [ 2.041299] input: ROTEL Rotel PC-USB as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.2/input/input0
  897. [ 2.041655] hid-generic 0003:278B:3001.0001: input,hidraw0: USB HID v1.00 Device [ROTEL Rotel PC-USB] on usb-bcm2708_usb-1.2/input2
  898. [ 2.115008] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  899. [ 2.126575] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
  900. [ 2.126606] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  901. [ 2.126624] usb 1-1.3: Product: USB 2.0 Hub [MTT]
  902. [ 2.127535] hub 1-1.3:1.0: USB hub found
  903. [ 2.127704] hub 1-1.3:1.0: 7 ports detected
  904. [ 2.402017] usb 1-1.3.5: new high-speed USB device number 6 using dwc_otg
  905. [ 2.431701] usb 1-1.3.5: New USB device found, idVendor=148f, idProduct=5370
  906. [ 2.431736] usb 1-1.3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  907. [ 2.431755] usb 1-1.3.5: Product: 802.11 n WLAN
  908. [ 2.431772] usb 1-1.3.5: Manufacturer: Ralink
  909. [ 2.431788] usb 1-1.3.5: SerialNumber: 1.0
  910. [ 2.508011] usb 1-1.3.6: new high-speed USB device number 7 using dwc_otg
  911. [ 2.560495] usb 1-1.3.6: New USB device found, idVendor=1058, idProduct=0820
  912. [ 2.560534] usb 1-1.3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  913. [ 2.560551] usb 1-1.3.6: Product: My Passport 0820
  914. [ 2.560566] usb 1-1.3.6: Manufacturer: Western Digital
  915. [ 2.560582] usb 1-1.3.6: SerialNumber: 575837314541334341555037
  916. [ 2.562026] usb-storage 1-1.3.6:1.0: USB Mass Storage device detected
  917. [ 2.562492] scsi0 : usb-storage 1-1.3.6:1.0
  918. [ 3.566076] scsi 0:0:0:0: Direct-Access WD My Passport 0820 1007 PQ: 0 ANSI: 6
  919. [ 3.570073] scsi 0:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
  920. [ 3.571795] sd 0:0:0:0: [sda] Spinning up disk...
  921. [ 4.573889] ..ready
  922. [ 5.577738] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
  923. [ 5.578446] sd 0:0:0:0: [sda] Write Protect is off
  924. [ 5.578483] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
  925. [ 5.579176] sd 0:0:0:0: [sda] No Caching mode page found
  926. [ 5.579360] sd 0:0:0:0: [sda] Assuming drive cache: write through
  927. [ 5.582249] sd 0:0:0:0: [sda] No Caching mode page found
  928. [ 5.582437] sd 0:0:0:0: [sda] Assuming drive cache: write through
  929. [ 5.632361] sda: sda1
  930. [ 5.635935] sd 0:0:0:0: [sda] No Caching mode page found
  931. [ 5.636097] sd 0:0:0:0: [sda] Assuming drive cache: write through
  932. [ 5.636234] sd 0:0:0:0: [sda] Attached SCSI disk
  933. [ 6.095238] EXT4-fs (mmcblk0p5): recovery complete
  934. [ 6.107116] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  935. [ 6.107219] VFS: Mounted root (ext4 filesystem) on device 179:5.
  936. [ 6.117633] devtmpfs: mounted
  937. [ 6.118397] Freeing unused kernel memory: 200K (c05da000 - c060c000)
  938. [ 7.621695] RPC: Registered named UNIX socket transport module.
  939. [ 7.621723] RPC: Registered udp transport module.
  940. [ 7.621735] RPC: Registered tcp transport module.
  941. [ 7.621746] RPC: Registered tcp NFSv4.1 backchannel transport module.
  942. [ 7.875178] FS-Cache: Netfs 'nfs' registered for caching
  943. [ 7.880797] systemd-modules-load[63]: Inserted module 'nfs'
  944. [ 11.814023] EXT4-fs (mmcblk0p5): Mount option "nouser_xattr" will be removed by 3.5
  945. Contact linux-ext4@vger.kernel.org if you think we should keep it.
  946.  
  947. [ 11.814095] EXT4-fs (mmcblk0p5): re-mounted. Opts: nouser_xattr,errors=remount-ro
  948. [ 11.837284] bcm2708_rng_init=dca32000
  949. [ 11.839209] systemd-modules-load[63]: Inserted module 'bcm2708_rng'
  950. [ 12.024589] systemd-modules-load[63]: Inserted module 'snd_bcm2835'
  951. [ 12.234586] systemd-udevd[86]: starting version 212
  952. [ 13.117222] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  953. [ 13.118412] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  954. [ 13.118617] bcm2708_i2c_init_pinmode(0,0)
  955. [ 13.118639] bcm2708_i2c_init_pinmode(0,1)
  956. [ 13.118973] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
  957. [ 13.119095] bcm2708_i2c_init_pinmode(1,2)
  958. [ 13.119131] bcm2708_i2c_init_pinmode(1,3)
  959. [ 13.119675] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
  960. [ 13.479142] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
  961. [ 14.133565] cfg80211: Calling CRDA to update world regulatory domain
  962. [ 14.477698] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  963. [ 14.880234] usbcore: registered new interface driver snd-usb-audio
  964. [ 15.970174] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  965. [ 16.902084] usb 1-1.3.5: reset high-speed USB device number 6 using dwc_otg
  966. [ 16.925681] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  967. [ 17.015921] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  968. [ 17.017107] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
  969. [ 17.017142] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  970. [ 17.017159] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
  971. [ 17.017178] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  972. [ 17.017192] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
  973. [ 17.017207] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  974. [ 17.017220] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
  975. [ 17.017234] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  976. [ 17.017247] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
  977. [ 17.017276] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  978. [ 17.017293] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
  979. [ 17.017348] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  980. [ 17.017367] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
  981. [ 17.017384] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  982. [ 17.017398] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
  983. [ 17.017413] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  984. [ 17.017472] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
  985. [ 17.017492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  986. [ 17.017506] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
  987. [ 17.017522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  988. [ 17.017536] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
  989. [ 17.017554] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  990. [ 17.017568] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
  991. [ 17.017583] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  992. [ 17.017596] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
  993. [ 17.017611] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  994. [ 17.017624] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
  995. [ 17.017639] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  996. [ 17.083017] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  997. [ 17.091002] usbcore: registered new interface driver rt2800usb
  998. [ 17.423070] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  999. [ 18.248716] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  1000. [ 18.266289] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  1001. [ 19.952421] wlan0: authenticate with 00:1e:8c:34:ac:63
  1002. [ 19.970132] wlan0: send auth to 00:1e:8c:34:ac:63 (try 1/3)
  1003. [ 19.986645] wlan0: authenticated
  1004. [ 19.987651] rt2800usb 1-1.3.5:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
  1005. [ 19.987691] rt2800usb 1-1.3.5:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
  1006. [ 19.987959] wlan0: associate with 00:1e:8c:34:ac:63 (try 1/3)
  1007. [ 19.990743] wlan0: RX AssocResp from 00:1e:8c:34:ac:63 (capab=0x411 status=0 aid=3)
  1008. [ 20.005964] wlan0: associated
  1009. [ 38.806161] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
  1010. [ 38.806486] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
  1011. [ 38.806556] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
  1012. [ 38.806629] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
  1013. [ 38.807445] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1014. [ 38.807569] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1015. [ 38.807602] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1016. [ 38.807663] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
  1017. [ 38.807702] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1018. [ 38.807741] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1019. [ 38.808725] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1020. [ 38.809119] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1021. [ 38.809150] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1022. [ 38.809213] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1023. [ 38.919121] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1024. [ 38.919252] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1025. [ 38.919399] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1026. [ 38.919548] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1027. [ 38.919605] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1028. [ 38.919711] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1029. [ 38.919817] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1030. [ 38.919994] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1031. [ 49.952033] fuse init (API version 7.22)
  1032. [ 58.450684] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1033. [ 59.771171] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1034. [ 60.239676] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1035. [ 61.808087] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1036. [ 62.049272] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1037. [ 63.720414] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
  1038. [ 63.720590] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
  1039. [ 63.720619] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
  1040. [ 63.734928] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1041. [ 63.735040] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1042. [ 63.735067] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1043. [ 63.742269] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1044. [ 63.742375] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1045. [ 63.742404] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1046. [ 63.760372] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1047. [ 63.760516] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1048. [ 63.760584] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1049. [ 63.767547] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1050. [ 63.767690] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1051. [ 63.767719] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1052. [ 63.774784] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1053. [ 63.774951] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1054. [ 63.774980] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1055. [ 63.780812] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1056. [ 63.780978] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1057. [ 63.781007] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1058. [ 63.901304] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
  1059. [ 63.901407] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
  1060. [ 63.901468] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 0
  1061. [ 64.194460] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1062. [ 64.194759] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1063. [ 64.194797] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1064. [ 64.207556] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1065. [ 64.254031] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
  1066. [ 64.254307] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1067. [ 64.254370] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1068. [ 64.254718] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1069. [ 64.254778] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1070. [ 64.255119] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1071. [ 64.255221] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1072. [ 64.255295] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1073. [ 64.386513] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1074. [ 64.386778] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1075. [ 64.386903] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
  1076. [ 64.393997] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1077. [ 64.394128] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1078. [ 64.394155] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
  1079. [ 64.400223] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1080. [ 64.400332] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1081. [ 64.400359] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1082. [ 64.414929] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1083. [ 64.415044] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1084. [ 64.415073] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1085. [ 64.436995] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1086. [ 64.437198] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1087. [ 64.437227] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1088. [ 64.451634] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1089. [ 64.451927] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1090. [ 64.451958] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1091. [ 64.497432] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1092. [ 64.497512] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1093. [ 64.498752] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1094. [ 64.594893] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1095. [ 64.594939] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1096. [ 64.594962] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1097. [ 72.905909] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  1098. [ 74.358527] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  1099. [ 88.899627] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1100. [ 88.899929] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1101. [ 88.899959] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1102. [ 88.920479] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1103. [ 88.920696] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1104. [ 88.920730] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1105. [ 88.934059] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1106. [ 88.934162] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1107. [ 88.934190] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1108. [ 88.960944] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1109. [ 88.961081] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1110. [ 88.961116] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1111. [ 88.968270] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1112. [ 88.968378] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1113. [ 88.968405] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1114. [ 88.981762] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1115. [ 88.982022] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1116. [ 88.982055] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1117. [ 89.020772] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1118. [ 89.020940] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1119. [ 89.020968] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1120. [ 89.096113] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1121. [ 89.184419] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1122. [ 89.184568] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1123. [ 89.184796] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1124. [ 89.185061] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1125. [ 89.185168] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1126. [ 89.311221] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1127. [ 89.311424] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1128. [ 89.311454] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
  1129. [ 89.323002] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1130. [ 89.422601] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1131. [ 89.701725] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1132. [ 89.701911] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1133. [ 89.701940] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1134. [ 89.742211] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1135. [ 89.742422] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1136. [ 89.742452] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1137. [ 89.757018] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1138. [ 89.757117] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1139. [ 89.757145] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1140. [ 89.772019] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1141. [ 89.772129] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1142. [ 89.772156] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
  1143. [ 89.857065] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1144. [ 89.857175] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1145. [ 89.857203] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
  1146. [ 89.871942] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1147. [ 89.872053] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1148. [ 89.872081] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
  1149. [ 89.900440] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
  1150. [ 89.900701] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
  1151. [ 89.900737] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
  1152. [ 89.927953] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1153. [ 89.928063] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1154. [ 89.928092] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
  1155. [ 89.941985] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
  1156. [ 89.942079] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
  1157. [ 89.942112] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
  1158. [ 89.981246] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1159. [ 89.981320] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1160. [ 90.005001] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1161. [ 90.005132] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1162. [ 90.005192] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1163. [ 90.005336] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1164. [ 90.005734] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1165. [ 90.005888] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1166. [ 90.104619] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1167. [ 90.247211] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1168. [ 90.247319] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1169. [ 90.247346] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
  1170. [ 90.292583] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1171. [ 90.292913] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1172. [ 90.292944] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
  1173. [ 90.302470] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1174. [ 90.302618] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1175. [ 90.302780] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
  1176. [ 90.310065] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1177. [ 90.310168] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1178. [ 90.310195] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
  1179. [ 90.316544] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1180. [ 90.330441] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1181. [ 90.416900] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1182. [ 90.473193] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
  1183.  
  1184. ###### PHP backend ######
  1185. php version: 5.5.12
  1186. debug level: 0
  1187.  
  1188.  
  1189. Debug data collected in 46.795 seconds.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!