API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 23rd, 2012
75
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.01 KB | None | 0 0
raw download clone embed print report
  1. Initializing cgroup subsys cpu
  2. Linux version 3.2.27-cutdown-aufs (max@lynx) (gcc version 4.5.1 (Broadcom-2708) ) #7 PREEMPT Tue Sep 4 01:22:41 CEST 2012
  3. CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  4. CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. Machine: BCM2708
  6. Memory policy: ECC disabled, Data cache writeback
  7. On node 0 totalpages: 49152
  8. free_area_init_node: node 0, pgdat c096f584, node_mem_map c09ba000
  9. Normal zone: 384 pages used for memmap
  10. Normal zone: 0 pages reserved
  11. Normal zone: 48768 pages, LIFO batch:15
  12. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  13. pcpu-alloc: [0] 0
  14. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
  15. Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708.boardrev=0x3 bcm2708.serial=0x20313e28 smsc95xx.macaddr=B8:27:EB:31:3E:28 datadev=mmcblk0p2
  16. PID hash table entries: 1024 (order: 0, 4096 bytes)
  17. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  18. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  19. Memory: 192MB = 192MB total
  20. Memory: 184864k/184864k available, 11744k reserved, 0K highmem
  21. Virtual kernel memory layout:
  22. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  23. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  24. vmalloc : 0xcc800000 - 0xe8000000 ( 440 MB)
  25. lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
  26. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  27. .text : 0xc0008000 - 0xc049e000 (4696 kB)
  28. .init : 0xc049e000 - 0xc094c000 (4792 kB)
  29. .data : 0xc094c000 - 0xc096fc00 ( 143 kB)
  30. .bss : 0xc096fc24 - 0xc09b9824 ( 295 kB)
  31. NR_IRQS:330
  32. sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  33. timer_set_mode: unhandled mode:1
  34. timer_set_mode: unhandled mode:3
  35. Console: colour dummy device 80x30
  36. console [tty0] enabled
  37. Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  38. pid_max: default: 32768 minimum: 301
  39. Mount-cache hash table entries: 512
  40. CPU: Testing write buffer coherency: ok
  41. devtmpfs: initialized
  42. NET: Registered protocol family 16
  43. vc_mem_connected_init: called
  44. vc_mem_update: resp 0, vcbase=0 vcsize=0 armbase=0 armsize=0
  45. vc-mem: mm_vc_mem_phys_addr = 0x00000000
  46. vc-mem: mm_vc_mem_size = 0x00000000 (0 MiB)
  47. mailbox: Broadcom VideoCore Mailbox driver
  48. bcm2708_vcio: mailbox at f200b880
  49. bcm_power: Broadcom power driver
  50. bcm_power_open() -> 0
  51. bcm_power_request(0, 8)
  52. bcm_mailbox_read -> 00000080, 0
  53. bcm_power_request -> 0
  54. Serial: AMBA PL011 UART driver
  55. dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  56. bio: create slab <bio-0> at 0
  57. SCSI subsystem initialized
  58. usbcore: registered new interface driver usbfs
  59. usbcore: registered new interface driver hub
  60. usbcore: registered new device driver usb
  61. Switching to clocksource stc
  62. FS-Cache: Loaded
  63. CacheFiles: Loaded
  64. NET: Registered protocol family 2
  65. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  66. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  67. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  68. TCP: Hash tables configured (established 8192 bind 8192)
  69. TCP reno registered
  70. UDP hash table entries: 256 (order: 0, 4096 bytes)
  71. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  72. NET: Registered protocol family 1
  73. bcm2708_dma: DMA manager at cc808000
  74. bcm2708_gpio: bcm2708_gpio_probe c0951a98
  75. vc-mem: Videocore memory driver
  76. VFS: Disk quotas dquot_6.5.2
  77. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  78. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  79. Btrfs loaded
  80. aufs 3.2-20120730
  81. msgmni has been set to 361
  82. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  83. io scheduler noop registered
  84. io scheduler deadline registered
  85. io scheduler cfq registered (default)
  86. BCM2708FB: registering framebuffer (1280x720@16)
  87. bcm2708_fb_set_par info(cb8a1000) 1280x720 (1280x720), 0, 16
  88. BCM2708FB: start = cca00000,4d385000 width=1280, height=720, bpp=16, pitch=2560 size=1843200 success=0
  89. Console: switching to colour frame buffer device 160x45
  90. BCM2708FB: register framebuffer (0)
  91. brd: module loaded
  92. loop: module loaded
  93. vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  94. vcos: [1]: vchiq_init_state: called
  95. vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
  96. usbcore: registered new interface driver smsc95xx
  97. cdc_ncm: 04-Aug-2011
  98. usbcore: registered new interface driver cdc_ncm
  99. dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  100. Core Release: 2.80a
  101. Setting default values for core params
  102. Finished setting default values for core params
  103. Using Buffer DMA mode
  104. Periodic Transfer Interrupt Enhancement - disabled
  105. Multiprocessor Interrupt Enhancement - disabled
  106. OTG VER PARAM: 0, OTG VER FLAG: 0
  107. Dedicated Tx FIFOs mode
  108. dwc_otg: Microframe scheduler enabled
  109. dwc_otg bcm2708_usb: DWC OTG Controller
  110. dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  111. dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  112. Init: Port Power? op_state=1
  113. Init: Power Port (0)
  114. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  115. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  116. usb usb1: Product: DWC OTG Controller
  117. usb usb1: Manufacturer: Linux 3.2.27-cutdown-aufs dwc_otg_hcd
  118. usb usb1: SerialNumber: bcm2708_usb
  119. hub 1-0:1.0: USB hub found
  120. hub 1-0:1.0: 1 port detected
  121. dwc_otg: FIQ disabled
  122. Module dwc_common_port init
  123. usbcore: registered new interface driver uas
  124. Initializing USB Mass Storage driver...
  125. usbcore: registered new interface driver usb-storage
  126. USB Mass Storage support registered.
  127. usbcore: registered new interface driver libusual
  128. mousedev: PS/2 mouse device common for all mice
  129. cpuidle: using governor ladder
  130. cpuidle: using governor menu
  131. sdhci: Secure Digital Host Controller Interface driver
  132. sdhci: Copyright(c) Pierre Ossman
  133. sdhci: Enable low-latency mode
  134. bcm_power_open() -> 1
  135. Registered led device: mmc0::
  136. mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  137. mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  138. sdhci-pltfm: SDHCI platform and OF driver helper
  139. Registered led device: led0
  140. usbcore: registered new interface driver usbhid
  141. usbhid: USB HID core driver
  142. TCP cubic registered
  143. Initializing XFRM netlink socket
  144. NET: Registered protocol family 17
  145. Registering the dns_resolver key type
  146. VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  147. Freeing init memory: 4792K
  148. mmc0: new high speed SDHC card at address b368
  149. mmcblk0: mmc0:b368 SDC 15.0 GiB
  150. mmcblk0: p1 p2
  151. Indeed it is in host mode hprt0 = 00021501
  152. EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  153. EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  154. usb 1-1: new high-speed USB device number 2 using dwc_otg
  155. Indeed it is in host mode hprt0 = 00001101
  156. usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  157. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  158. hub 1-1:1.0: USB hub found
  159. hub 1-1:1.0: 3 ports detected
  160. usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  161. usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  162. usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  163. smsc95xx v1.0.4
  164. smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:31:3e:28
  165. usb 1-1.2: new full-speed USB device number 4 using dwc_otg
  166. usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
  167. usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  168. usb 1-1.2: Product: USB Receiver
  169. usb 1-1.2: Manufacturer: Logitech
  170. logitech-djreceiver 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input2
  171. input: Logitech Unifying Device. Wireless PID:400e as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input0
  172. logitech-djdevice 0003:046D:C52B.0004: input: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-bcm2708_usb-1.2:1
  173. usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  174. usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101
  175. usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  176. usb 1-1.3: Product: USB 2.0 Hub
  177. hub 1-1.3:1.0: USB hub found
  178. hub 1-1.3:1.0: 4 ports detected
  179. usb 1-1.3.1: new high-speed USB device number 6 using dwc_otg
  180. usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271
  181. usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
  182. usb 1-1.3.1: Product: USB2.0 WLAN
  183. usb 1-1.3.1: Manufacturer: ATHEROS
  184. usb 1-1.3.1: SerialNumber: 12345
  185. usb 1-1.3.3: new high-speed USB device number 7 using dwc_otg
  186. usb 1-1.3.3: New USB device found, idVendor=1058, idProduct=1010
  187. usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  188. usb 1-1.3.3: Product: External HDD
  189. usb 1-1.3.3: Manufacturer: Western Digital
  190. usb 1-1.3.3: SerialNumber: 57442D575845314139304C32323839
  191. scsi0 : usb-storage 1-1.3.3:1.0
  192. scsi 0:0:0:0: Direct-Access WD 2500BEV External 1.75 PQ: 0 ANSI: 4
  193. sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  194. sd 0:0:0:0: [sda] Write Protect is off
  195. sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  196. sd 0:0:0:0: [sda] No Caching mode page present
  197. sd 0:0:0:0: [sda] Assuming drive cache: write through
  198. sd 0:0:0:0: [sda] No Caching mode page present
  199. sd 0:0:0:0: [sda] Assuming drive cache: write through
  200. sda: sda1
  201. sd 0:0:0:0: [sda] No Caching mode page present
  202. sd 0:0:0:0: [sda] Assuming drive cache: write through
  203. sd 0:0:0:0: [sda] Attached SCSI disk
  204. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 789066
  205. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 796481
  206. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 790399
  207. EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 790398
  208. EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
  209. EXT4-fs (mmcblk0p2): recovery complete
  210. EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  211. udevd[171]: starting version 175
  212. cfg80211: Calling CRDA to update world regulatory domain
  213. usb 1-1.3.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
  214. ath9k_htc 1-1.3.1:1.0: ath9k_htc: HTC initialized with 33 credits
  215. ath9k_htc 1-1.3.1:1.0: ath9k_htc: FW Version: 1.3
  216. ath: EEPROM regdomain: 0x809c
  217. ath: EEPROM indicates we should expect a country code
  218. ath: doing EEPROM country->regdmn map search
  219. ath: country maps to regdmn code: 0x52
  220. ath: Country alpha2 being used: CN
  221. ath: Regpair used: 0x52
  222. ieee80211 phy0: Atheros AR9271 Rev:1
  223. Registered led device: ath9k_htc-phy0
  224. usb 1-1.3.1: ath9k_htc: USB layer initialized
  225. usbcore: registered new interface driver ath9k_htc
  226. ### snd_bcm2835_alsa_probe c09521d0 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
  227. Creating card...
  228. Creating device/chip ..
  229. Adding controls ..
  230. Registering card ....
  231. bcm2835 ALSA CARD CREATED!
  232. ### BCM2835 ALSA driver init OK ###
  233. wlan0: authenticate with 88:25:2c:08:ed:f2 (try 1)
  234. wlan0: authenticated
  235. wlan0: associate with 88:25:2c:08:ed:f2 (try 1)
  236. wlan0: RX AssocResp from 88:25:2c:08:ed:f2 (capab=0x431 status=0 aid=3)
  237. wlan0: associated
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!