API tools faq
paste
b74

smart ksv2

b74
Sep 18th, 2013
79
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.15 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.9-xxxx-std-ipv6-64-rescue] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.12
  6. Device Model: ST31000528AS
  7. Serial Number: 6VP53208
  8. LU WWN Device Id: 5 000c50 02818da0f
  9. Firmware Version: CC38
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Wed Sep 18 17:54:43 2013 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: FAILED!
  21. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  22. See vendor-specific Attribute list for failed Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 609) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 182) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x103f) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 104 099 006 Pre-fail Always - 110425379
  62. 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 64
  64. 5 Reallocated_Sector_Ct 0x0033 002 002 036 Pre-fail Always FAILING_NOW 4015
  65. 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 351343058
  66. 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 25369
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 32
  69. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1
  72. 188 Command_Timeout 0x0032 100 096 000 Old_age Always - 283472363591
  73. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  74. 190 Airflow_Temperature_Cel 0x0022 067 051 045 Old_age Always - 33 (Min/Max 33/34)
  75. 194 Temperature_Celsius 0x0022 033 049 000 Old_age Always - 33 (0 16 0 0)
  76. 195 Hardware_ECC_Recovered 0x001a 038 018 000 Old_age Always - 110425379
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 59352153088799
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2343757415
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4205113245
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 7 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 7 occurred at disk power-on lifetime: 25368 hours (1057 days + 0 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. a1 00 00 00 00 00 a0 00 00:07:23.822 IDENTIFY PACKET DEVICE
  112. ec 00 00 00 00 00 a0 00 00:07:23.821 IDENTIFY DEVICE
  113. 00 00 00 00 00 00 00 ff 00:07:23.509 NOP [Abort queued commands]
  114. a1 00 00 00 00 00 a0 00 00:07:18.501 IDENTIFY PACKET DEVICE
  115. ec 00 00 00 00 00 a0 00 00:07:18.500 IDENTIFY DEVICE
  116.  
  117. Error 6 occurred at disk power-on lifetime: 25368 hours (1057 days + 0 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 04 71 04 9d 00 32 e0
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. ec 00 00 00 00 00 a0 00 00:07:23.821 IDENTIFY DEVICE
  129. 00 00 00 00 00 00 00 ff 00:07:23.509 NOP [Abort queued commands]
  130. a1 00 00 00 00 00 a0 00 00:07:18.501 IDENTIFY PACKET DEVICE
  131. ec 00 00 00 00 00 a0 00 00:07:18.500 IDENTIFY DEVICE
  132. 00 00 00 00 00 00 00 ff 00:07:18.188 NOP [Abort queued commands]
  133.  
  134. Error 5 occurred at disk power-on lifetime: 25368 hours (1057 days + 0 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. a1 00 00 00 00 00 a0 00 00:07:18.501 IDENTIFY PACKET DEVICE
  146. ec 00 00 00 00 00 a0 00 00:07:18.500 IDENTIFY DEVICE
  147. 00 00 00 00 00 00 00 ff 00:07:18.188 NOP [Abort queued commands]
  148. a1 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY PACKET DEVICE
  149. ec 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY DEVICE
  150.  
  151. Error 4 occurred at disk power-on lifetime: 25368 hours (1057 days + 0 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 04 71 04 9d 00 32 e0
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. ec 00 00 00 00 00 a0 00 00:07:18.500 IDENTIFY DEVICE
  163. 00 00 00 00 00 00 00 ff 00:07:18.188 NOP [Abort queued commands]
  164. a1 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY PACKET DEVICE
  165. ec 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY DEVICE
  166. 00 00 00 00 00 00 00 ff 00:07:12.868 NOP [Abort queued commands]
  167.  
  168. Error 3 occurred at disk power-on lifetime: 25368 hours (1057 days + 0 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. a1 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY PACKET DEVICE
  180. ec 00 00 00 00 00 a0 00 00:07:13.180 IDENTIFY DEVICE
  181. 00 00 00 00 00 00 00 ff 00:07:12.868 NOP [Abort queued commands]
  182. 60 00 20 ff ff ff 4f 00 00:07:04.431 READ FPDMA QUEUED
  183. 60 00 08 ff ff ff 4f 00 00:07:04.431 READ FPDMA QUEUED
  184.  
  185. SMART Self-test log structure revision number 1
  186. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  187. # 1 Short offline Completed without error 00% 5453 -
  188. # 2 Short offline Completed without error 00% 5447 -
  189. # 3 Short offline Completed without error 00% 5447 -
  190. # 4 Short offline Completed without error 00% 6 -
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  194. 1 0 0 Not_testing
  195. 2 0 0 Not_testing
  196. 3 0 0 Not_testing
  197. 4 0 0 Not_testing
  198. 5 0 0 Not_testing
  199. Selective self-test flags (0x0):
  200. After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!