API tools faq
paste
Advertisement
Guest User

SMART data from sdc (3tb) in 2015

a guest
Nov 21st, 2015
59
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.86 KB | None | 0 0
raw download clone embed print report diff
  1. smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.5-1-ARCH] (local build)
  2. Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Green
  6. Device Model: WDC WD30EZRX-00DC0B0
  7. Serial Number: WD-WMC1T2902918
  8. LU WWN Device Id: 5 0014ee 058ded16e
  9. Firmware Version: 80.00A80
  10. User Capacity: 3.000.591.900.160 bytes [3,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ACS-2 (minor revision not indicated)
  14. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  15. Local Time is: Sun Nov 22 02:22:09 2015 CET
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: (40380) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 405) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x70b5) SCT Status supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  59. 3 Spin_Up_Time 0x0027 180 174 021 Pre-fail Always - 5975
  60. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1875
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  63. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5275
  64. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  65. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1875
  67. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 137
  68. 193 Load_Cycle_Count 0x0032 192 192 000 Old_age Always - 24416
  69. 194 Temperature_Celsius 0x0022 126 108 000 Old_age Always - 24
  70. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  74. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 256 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 256 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 04 61 45 00 00 00 a0 Device Fault; Error: ABRT
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. ef 03 45 00 00 00 a0 08 00:04:54.869 SET FEATURES [Set transfer mode]
  104. ec 00 00 00 00 00 a0 08 00:04:54.842 IDENTIFY DEVICE
  105. ec 00 00 00 00 00 a0 08 00:04:54.672 IDENTIFY DEVICE
  106. ef 03 46 00 00 00 a0 08 00:04:54.666 SET FEATURES [Set transfer mode]
  107.  
  108. Error 255 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)
  109. When the command that caused the error occurred, the device was active or idle.
  110.  
  111. After command completion occurred, registers were:
  112. ER ST SC SN CL CH DH
  113. -- -- -- -- -- -- --
  114. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  115.  
  116. Commands leading to the command that caused the error were:
  117. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  118. -- -- -- -- -- -- -- -- ---------------- --------------------
  119. ef 03 46 00 00 00 a0 08 00:04:54.666 SET FEATURES [Set transfer mode]
  120. ec 00 00 00 00 00 a0 08 00:04:54.646 IDENTIFY DEVICE
  121. ec 00 00 00 00 00 a0 08 00:04:54.629 IDENTIFY DEVICE
  122. ef 03 46 00 00 00 a0 08 00:04:54.622 SET FEATURES [Set transfer mode]
  123.  
  124. Error 254 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. ef 03 46 00 00 00 a0 08 00:04:54.622 SET FEATURES [Set transfer mode]
  136. ec 00 00 00 00 00 a0 08 00:04:54.602 IDENTIFY DEVICE
  137. ec 00 00 00 00 00 a0 08 00:04:54.586 IDENTIFY DEVICE
  138. ef 03 46 00 00 00 a0 08 00:04:54.579 SET FEATURES [Set transfer mode]
  139.  
  140. Error 253 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. ef 03 46 00 00 00 a0 08 00:04:54.579 SET FEATURES [Set transfer mode]
  152. ec 00 00 00 00 00 a0 08 00:04:54.559 IDENTIFY DEVICE
  153. ec 00 00 00 00 00 a0 08 00:04:54.542 IDENTIFY DEVICE
  154. ef 03 46 00 00 00 a0 08 00:04:54.536 SET FEATURES [Set transfer mode]
  155.  
  156. Error 252 occurred at disk power-on lifetime: 5254 hours (218 days + 22 hours)
  157. When the command that caused the error occurred, the device was active or idle.
  158.  
  159. After command completion occurred, registers were:
  160. ER ST SC SN CL CH DH
  161. -- -- -- -- -- -- --
  162. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  163.  
  164. Commands leading to the command that caused the error were:
  165. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  166. -- -- -- -- -- -- -- -- ---------------- --------------------
  167. ef 03 46 00 00 00 a0 08 00:04:54.536 SET FEATURES [Set transfer mode]
  168. ec 00 00 00 00 00 a0 08 00:04:54.516 IDENTIFY DEVICE
  169. ec 00 00 00 00 00 a0 08 00:04:54.499 IDENTIFY DEVICE
  170. ef 03 46 00 00 00 a0 08 00:04:54.493 SET FEATURES [Set transfer mode]
  171.  
  172. SMART Self-test log structure revision number 1
  173. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  174. # 1 Conveyance offline Completed without error 00% 5271 -
  175. # 2 Short offline Completed without error 00% 5271 -
  176. # 3 Conveyance offline Completed without error 00% 5271 -
  177. # 4 Short offline Completed without error 00% 5270 -
  178. # 5 Short offline Completed without error 00% 5270 -
  179. # 6 Conveyance offline Completed without error 00% 5270 -
  180. # 7 Short offline Aborted by host 10% 5270 -
  181. # 8 Short offline Completed without error 00% 5117 -
  182. # 9 Conveyance offline Completed without error 00% 4936 -
  183. #10 Short offline Completed without error 00% 4936 -
  184. #11 Extended offline Completed without error 00% 69 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!