Advertisement
Guest User

Untitled

a guest
Jul 31st, 2016
146
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.14 KB | None | 0 0
  1. U-Boot> boot
  2.  
  3. NAND read: device 0 offset 0x460000, size 0xa00000
  4. 10485760 bytes read: OK
  5. ## Booting kernel from Legacy Image at 20100000 ...
  6. Image Name: Linux-4.5.5
  7. Image Type: ARM Linux Kernel Image (uncompressed)
  8. Data Size: 3883048 Bytes = 3.7 MiB
  9. Load Address: 20100000
  10. Entry Point: 20100000
  11. Verifying Checksum ... OK
  12. ## Flattened Device Tree blob at 20000000
  13. Booting using the fdt blob at 0x20000000
  14. Loading Kernel Image ... OK
  15. Loading Device Tree to 21eb2000, end 21eb97a9 ... OK
  16.  
  17. Starting kernel ...
  18.  
  19. Uncompressing Linux... done, booting the kernel.
  20. Booting Linux on physical CPU 0x0
  21. Linux version 4.5.5 (mark@Mark) (gcc version 4.9.3 (Buildroot 2016.05) ) #1 Sun Jul 31 11:34:03 MSK 2016
  22. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
  23. CPU: VIVT data cache, VIVT instruction cache
  24. Machine model: Calao TNY A9260
  25. bootconsole [earlycon0] enabled
  26. Memory policy: Data cache writeback
  27. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  28. Kernel command line: mem=32M noinitrd console=ttyS0,115200n8 earlyprintk=serial,ttyS0,115200n8 root=/dev/mtdblock6 rw rootfstype=jffs2 rootwait user_debug=31 init=/bin/sh
  29. PID hash table entries: 128 (order: -3, 512 bytes)
  30. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  31. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  32. Memory: 24500K/32768K available (5322K kernel code, 232K rwdata, 1880K rodata, 228K init, 156K bss, 8268K reserved, 0K cma-reserved)
  33. Virtual kernel memory layout:
  34. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  36. vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)
  37. lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
  38. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  39. .text : 0xc0008000 - 0xc0710c8c (7204 kB)
  40. .init : 0xc0711000 - 0xc074a000 ( 228 kB)
  41. .data : 0xc074a000 - 0xc0784068 ( 233 kB)
  42. .bss : 0xc0784068 - 0xc07ab428 ( 157 kB)
  43. NR_IRQS:16 nr_irqs:16 16
  44. clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 9556302164 ns
  45. sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093750ns
  46. Console: colour dummy device 80x30
  47. Calibrating delay loop... 99.24 BogoMIPS (lpj=387072)
  48. pid_max: default: 32768 minimum: 301
  49. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  50. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  51. CPU: Testing write buffer coherency: ok
  52. Setting up static identity map for 0x20008400 - 0x2000847c
  53. devtmpfs: initialized
  54. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns
  55. pinctrl core: initialized pinctrl subsystem
  56. NET: Registered protocol family 16
  57. DMA: preallocated 256 KiB pool for atomic coherent allocations
  58. AT91: Detected SoC: at91sam9260, revision 2
  59. No ATAGs?
  60. gpio-at91 fffff400.gpio: at address fefff400
  61. gpio-at91 fffff600.gpio: at address fefff600
  62. gpio-at91 fffff800.gpio: at address fefff800
  63. pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver
  64. clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900835740 ns
  65. SCSI subsystem initialized
  66. usbcore: registered new interface driver usbfs
  67. usbcore: registered new interface driver hub
  68. usbcore: registered new device driver usb
  69. Linux video capture interface: v2.00
  70. pps_core: LinuxPPS API ver. 1 registered
  71. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  72. PTP clock support registered
  73. Advanced Linux Sound Architecture Driver Initialized.
  74. clocksource: Switched to clocksource tcb_clksrc
  75. VFS: Disk quotas dquot_6.6.0
  76. VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  77. NET: Registered protocol family 2
  78. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  79. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  80. TCP: Hash tables configured (established 1024 bind 1024)
  81. UDP hash table entries: 256 (order: 0, 4096 bytes)
  82. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  83. NET: Registered protocol family 1
  84. futex hash table entries: 256 (order: -1, 3072 bytes)
  85. audit: initializing netlink subsys (disabled)
  86. audit: type=2000 audit(0.835:1): initialized
  87. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  88. romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  89. fuse init (API version 7.24)
  90. io scheduler noop registered (default)
  91. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  92. [drm] Initialized drm 1.1.0 20060810
  93. brd: module loaded
  94. loop: module loaded
  95. atmel_nand 40000000.nand: Use On Flash BBT
  96. atmel_nand 40000000.nand: No DMA support for NAND access.
  97. nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  98. nand: Samsung NAND 128MiB 3,3V 8-bit
  99. nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  100. Bad block table found at page 65472, version 0x01
  101. Bad block table found at page 65408, version 0x01
  102. 8 ofpart partitions found on MTD device atmel_nand
  103. Creating 8 MTD partitions on "atmel_nand":
  104. 0x000000000000-0x000000020000 : "at91bootstrap"
  105. 0x000000020000-0x000000040000 : "U-Boot Evn CONFIG_ENV_OFFSET"
  106. 0x000000040000-0x000000060000 : "U-Boot Evn CONFIG_ENV_OFFSET_REDUND"
  107. 0x000000060000-0x000000460000 : "U-Boot"
  108. 0x000000460000-0x000000560000 : "Device Tree"
  109. 0x000000560000-0x000001040000 : "kernel"
  110. 0x000001400000-0x000007800000 : "rootfs"
  111. 0x000007800000-0x000008000000 : "data"
  112. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  113. ehci-atmel: EHCI Atmel driver
  114. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  115. ohci-atmel: OHCI Atmel driver
  116. usbcore: registered new interface driver cdc_acm
  117. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  118. usbcore: registered new interface driver usb-storage
  119. usbcore: registered new interface driver usbserial
  120. usbcore: registered new interface driver usbserial_generic
  121. usbserial: USB Serial support registered for generic
  122. usbcore: registered new interface driver ftdi_sio
  123. usbserial: USB Serial support registered for FTDI USB Serial Device
  124. usbcore: registered new interface driver pl2303
  125. usbserial: USB Serial support registered for pl2303
  126. udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers
  127. mousedev: PS/2 mouse device common for all mice
  128. AT91: Starting after user reset
  129. usbcore: registered new interface driver usbhid
  130. usbhid: USB HID core driver
  131. iio iio:device0: Resolution used: 10 bits
  132. iio iio:device0: not support touchscreen in the adc compatible string.
  133. NET: Registered protocol family 10
  134. sit: IPv6 over IPv4 tunneling driver
  135. NET: Registered protocol family 17
  136. registered taskstats version 1
  137. hctosys: unable to open rtc device (rtc0)
  138. ALSA device list:
  139. No soundcards found.
  140. Warning: unable to open an initial console.
  141. jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  142. VFS: Mounted root (jffs2 filesystem) on device 31:6.
  143. devtmpfs: mounted
  144. Freeing unused kernel memory: 228K (c0711000 - c074a000)
  145. Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
  146.  
  147. ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
  148.  
  149. random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement