dmesg

<6>[    0.000000] Booting Linux on physical CPU 0

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 3.4.0-cyanogenmod-ge006882 (build02@cyanogenmod) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sun Sep 21 18:51:21 PDT 2014

<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d

<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001

<6>[    0.000000] Initialized persistent memory from 60000000-600fffff

<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000

<6>[    0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found external_image_region@fa00000, memory base 0x0fa00000, size 5 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found peripheral_region@5a00000, memory base 0x05a00000, size 33 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found tz_apps@0x7b00000, memory base 0x07b00000, size 5 MiB, limit 0xffffffff

<6>[    0.000000] cma: Found modem_region@0x8000000, memory base 0x08000000, size 82 MiB, limit 0xffffffff

<6>[    0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem

<6>[    0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem

<6>[    0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem

<6>[    0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem

<6>[    0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)

<6>[    0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem

<6>[    0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps

<6>[    0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem

<6>[    0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region

<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc

<6>[    0.000000] IMEM DT static mapping successful

<7>[    0.000000] On node 0 totalpages: 754432

<7>[    0.000000] free_area_init_node: node 0, pgdat c10d6bc0, node_mem_map cd200000

<7>[    0.000000]   Normal zone: 1520 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 161040 pages, LIFO batch:31

<7>[    0.000000]   HighMem zone: 4624 pages used for memmap

<7>[    0.000000]   HighMem zone: 587248 pages, LIFO batch:31

<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @cea5a000 s16064 r0 d12608 u32768

<7>[    0.000000] pcpu-alloc: s16064 r0 d12608 u32768 alloc=8*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 748288

<5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=b1f85ebe androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 LCD_id<4 oppo.rf_version=66 maxcpus=2 androidboot.startupmode=pwrkey androidboot.mode=reboot lk_version=V1.0

<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Memory: 90MB 40MB 2817MB = 2947MB total

<5>[    0.000000] Memory: 2561452k/2561452k available, 584276k reserved, 2006016K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000] 	   vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)

<5>[    0.000000] 	    lowmem : 0xc0000000 - 0xef800000   ( 760 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]       .text : 0xc0008000 - 0xc0ed3250   (15149 kB)

<5>[    0.000000]       .init : 0xc0f00000 - 0xc1015ec0   (1112 kB)

<5>[    0.000000]       .data : 0xc1016000 - 0xc10dd74c   ( 798 kB)

<5>[    0.000000]        .bss : 0xc10dd770 - 0xc13e4f2c   (3102 kB)

<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.

<6>[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.

<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16

<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms

<6>[    0.000000] Switching to timer-based delay loop

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] kmemleak: Kernel memory leak detector disabled

<6>[    0.000123] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

<6>[    0.000143] pid_max: default: 32768 minimum: 301

<6>[    0.000300] Security Framework initialized

<6>[    0.000317] SELinux:  Initializing.

<7>[    0.000351] SELinux:  Starting in permissive mode

<6>[    0.000418] Mount-cache hash table entries: 512

<6>[    0.001252] Initializing cgroup subsys debug

<6>[    0.001267] Initializing cgroup subsys cpuacct

<6>[    0.001278] Initializing cgroup subsys freezer

<6>[    0.001326] CPU: Testing write buffer coherency: ok

<6>[    0.001571] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>[    0.001644] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available

<6>[    0.005461] Setting up static identity map for 0xa6ec08 - 0xa6ec90

<6>[    0.005482] MSM Memory Dump table set up

<6>[    0.007444] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>[    0.007624] Brought up 2 CPUs

<6>[    0.007636] SMP: Total of 2 processors activated (76.80 BogoMIPS).

<6>[    0.022122] dummy:

<6>[    0.039335] NET: Registered protocol family 16

<6>[    0.042074] DMA: preallocated 256 KiB pool for atomic coherent allocations

<6>[    0.044079] KPI: Bootloader start count = 871845323

<6>[    0.044090] KPI: Bootloader end count = 3344346167

<6>[    0.044098] KPI: Bootloader display count = 60399382

<6>[    0.044107] KPI: Bootloader load kernel count = 895875115

<6>[    0.044117] KPI: Kernel MPM timestamp = 246896

<6>[    0.044125] KPI: Kernel MPM Clock frequency = 32768

<6>[    0.044143] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536

<6>[    0.044148]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609

<3>[    0.044481] msm_8974_init_gpiomux:1477 socinfo_get_version 10001

<6>[    0.063573] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio

<6>[    0.088038] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized

<6>[    0.114704] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle

<6>[    0.115220] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle

<6>[    0.115726] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle

<6>[    0.116276] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle

<6>[    0.116779] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle

<6>[    0.117296] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle

<6>[    0.117795] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle

<6>[    0.118347] 8841_s3: 1050 mV normal idle

<6>[    0.118879] 8841_s4: 815 <--> 900 mV at 0 mV normal idle

<6>[    0.119416] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle

<6>[    0.119913] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle

<6>[    0.120444] 8941_s1: 1300 mV normal idle

<6>[    0.120984] 8941_s2: 2150 mV normal idle

<6>[    0.121516] 8941_s3: 1800 mV normal idle

<6>[    0.122108] 8941_l1: 1225 mV normal idle

<6>[    0.122633] 8941_l2: 1200 mV normal idle

<6>[    0.123170] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle

<6>[    0.123710] 8941_l4: 1225 mV normal idle

<6>[    0.124248] 8941_l5: 1800 mV normal idle

<6>[    0.124779] 8941_l6: 1800 mV normal idle

<6>[    0.125323] 8941_l7: 1800 mV normal idle

<6>[    0.125847] 8941_l8: 1800 mV normal idle

<6>[    0.126394] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle

<6>[    0.126941] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle

<6>[    0.127473] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle

<6>[    0.128012] 8941_l12: 1800 mV normal idle

<6>[    0.128504] 8941_l12_ao: 1800 mV normal idle

<6>[    0.129057] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle

<6>[    0.129584] 8941_l14: 1800 mV normal idle

<6>[    0.130146] 8941_l15: 2050 mV normal idle

<6>[    0.130686] 8941_l16: 2700 mV normal idle

<6>[    0.131227] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle

<6>[    0.131765] 8941_l18: 2850 mV normal idle

<6>[    0.132358] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle

<6>[    0.132906] 8941_l20: 2950 mV normal idle

<6>[    0.133462] 8941_l21: 2950 mV normal idle

<6>[    0.134014] 8941_l22: 3000 mV normal idle

<6>[    0.134583] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle

<6>[    0.135139] 8941_l24: 3075 mV normal idle

<6>[    0.135656] 8941_lvs1:

<6>[    0.136143] 8941_lvs2:

<6>[    0.136606] 8941_lvs3:

<6>[    0.139569] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4

<6>[    0.139583] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4

<6>[    0.139951] krait0: 500 <--> 1120 mV at 900 mV fast normal idle

<6>[    0.140548] krait1: 500 <--> 1120 mV at 900 mV fast normal idle

<6>[    0.141125] krait2: 500 <--> 1120 mV at 900 mV fast normal idle

<6>[    0.141708] krait3: 500 <--> 1120 mV at 900 mV fast normal idle

<6>[    0.184651] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues

<6>[    0.185537] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.

<6>[    0.185559] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues

<3>[    0.185744] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table

<6>[    0.186334] persistent_ram: found existing buffer, size 70494, start 70494

<6>[    0.383810] console [ram-1] enabled

<4>[    0.383929] 8941_l18: Failed to create debugfs directory

<6>[    0.384308] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

<6>[    0.384456] hw-breakpoint: maximum watchpoint size is 8 bytes.

<6>[    0.386872] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1

<6>[    0.386972] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3

<6>[    0.387121] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 6

<6>[    0.387204] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1

<6>[    0.391169] L2 @ 300000 KHz

<6>[    0.391426] CPU0 @ 960000 KHz

<6>[    0.391507] CPU1 @ unknown rate. Forcing new rate.

<6>[    0.391752] CPU1 @ 300000 KHz

<6>[    0.391832] CPU2 @ unknown rate. Forcing new rate.

<6>[    0.391994] CPU2 @ 300000 KHz

<6>[    0.392075] CPU3 @ unknown rate. Forcing new rate.

<6>[    0.392174] CPU3 @ 300000 KHz

<6>[    0.394212] 8941_boost: 4500 mV

<6>[    0.394918] 8941_mvs1:

<3>[    0.395077] qcom,qpnp-regulator qpnp-regulator-ee111400: Failed to find supply parent

<6>[    0.395381] spmi qpnp-regulator-ee111400: Driver qcom,qpnp-regulator requests probe deferral

<6>[    0.395784] 8941_mvs2:

<6>[    0.395982] 8941_mvs2: supplied by 8941_boost

<6>[    0.400209] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20

<6>[    0.400353] sps:BAM 0xf9984000 is registered.

<6>[    0.400441] sps:sps is ready.

<6>[    0.402947] gdsc_venus:

<6>[    0.403525] gdsc_mdss:

<6>[    0.404046] gdsc_jpeg:

<6>[    0.404534] gdsc_vfe:

<6>[    0.404949] gdsc_oxili_gx:

<6>[    0.405116] gdsc_oxili_gx: supplied by 8841_s4_corner

<6>[    0.405670] gdsc_oxili_cx:

<6>[    0.406076] gdsc_usb_hsic:

<3>[    0.406982] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

<6>[    0.414446] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000

<6>[    0.415121] Physical OCMEM zone layout:

<6>[    0.415210]  zone graphics	: 0xfec00000 - 0xfecfffff (1024 KB)

<6>[    0.415303]  zone lp_audio	: 0xfed00000 - 0xfed7ffff ( 512 KB)

<6>[    0.415450]  zone video	: 0xfed00000 - 0xfed7ffff ( 512 KB)

<6>[    0.434473] bio: create slab <bio-0> at 0

<6>[    0.435367] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral

<6>[    0.436150] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device

<3>[    0.436316] ION-heap mm: Cannot specify alignment for this type of heap

<6>[    0.436475] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device

<3>[    0.436602] ION-heap adsp: Cannot specify alignment for this type of heap

<6>[    0.436754] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device

<6>[    0.436942] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device

<6>[    0.437175] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device

<6>[    0.437409] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device

<6>[    0.437650] ION heap system created

<6>[    0.437834] ION heap kmalloc created

<6>[    0.437948] ION heap mm created at 0xb0400000 with size fc00000

<6>[    0.438018] ION heap adsp created at 0xac400000 with size 3f00000

<6>[    0.438133] ION heap qsecom created at 0xab000000 with size 1100000

<6>[    0.438202] ION heap audio created at 0xaa000000 with size c04000

<6>[    0.438310] ION heap pil_1 created at 0x05a00000 with size 2100000

<6>[    0.438378] ION heap pil_2 created at 0x08000000 with size 5200000

<5>[    0.439831] SCSI subsystem initialized

<6>[    0.439971] usbcore: registered new interface driver usbfs

<6>[    0.440106] usbcore: registered new interface driver hub

<6>[    0.440276] usbcore: registered new device driver usb

<6>[    0.440810] Linux media interface: v0.10

<6>[    0.440891] Linux video capture interface: v2.00

<6>[    0.443758] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks

<6>[    0.445888] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks

<6>[    0.448326] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks

<6>[    0.449943] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks

<6>[    0.451503] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks

<6>[    0.453147] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0

<6>[    0.453330] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1

<6>[    0.453555] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2

<6>[    0.453788] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0

<6>[    0.454017] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1

<6>[    0.454241] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2

<6>[    0.454473] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0

<6>[    0.454668] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1

<6>[    0.454888] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2

<6>[    0.455106] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3

<6>[    0.455289] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4

<6>[    0.455550] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0

<6>[    0.455777] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1

<6>[    0.455991] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2

<6>[    0.456183] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0

<6>[    0.456401] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1

<6>[    0.456618] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2

<6>[    0.458791] Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>[    0.459277] Bluetooth: Core ver 2.16

<6>[    0.459367] NET: Registered protocol family 31

<6>[    0.459415] Bluetooth: HCI device and connection manager initialized

<6>[    0.459500] Bluetooth: HCI socket layer initialized

<6>[    0.459548] Bluetooth: L2CAP socket layer initialized

<6>[    0.459867] Bluetooth: SCO socket layer initialized

<6>[    0.460177] cfg80211: Calling CRDA to update world regulatory domain

<6>[    0.460285] cfg80211: World regulatory domain updated:

<6>[    0.460335] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

<6>[    0.460422] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460507] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460555] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460640] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460725] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460811] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460859] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)

<6>[    0.460943] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)

<6>[    0.461220] nfc: nfc_init: NFC Core ver 0.1

<6>[    0.461311] NET: Registered protocol family 39

<6>[    0.461847] Switching to clocksource arch_sys_counter

<6>[    0.490420] NET: Registered protocol family 2

<6>[    0.490632] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.491226] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>[    0.492796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.493565] TCP: Hash tables configured (established 131072 bind 65536)

<6>[    0.493648] TCP: reno registered

<6>[    0.493703] UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.493798] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.494176] NET: Registered protocol family 1

<6>[    0.494546] Trying to unpack rootfs image as initramfs...

<6>[    0.575983] Freeing initrd memory: 2204K

<6>[    0.578959] Detected 9 counters on the L2CC PMU.

<7>[    0.580997] gpiochip_find_base: found new base at 992

<6>[    0.581075] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p

<7>[    0.581438] gpiochip_find_base: found new base at 960

<6>[    0.581518] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p

<7>[    0.581635] gpiochip_find_base: found new base at 928

<6>[    0.581705] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p

<7>[    0.582247] gpiochip_find_base: found new base at 896

<6>[    0.582327] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p

<7>[    0.582445] gpiochip_find_base: found new base at 864

<6>[    0.582517] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel

<7>[    0.582922] gpiochip_find_base: found new base at 832

<6>[    0.583002] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel

<7>[    0.583118] gpiochip_find_base: found new base at 800

<6>[    0.583190] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p

<7>[    0.583598] gpiochip_find_base: found new base at 768

<6>[    0.583671] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p

<7>[    0.583759] gpiochip_find_base: found new base at 736

<6>[    0.583831] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel

<7>[    0.584247] gpiochip_find_base: found new base at 704

<6>[    0.584319] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel

<7>[    0.584462] gpiochip_find_base: found new base at 672

<6>[    0.584546] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p

<7>[    0.584937] gpiochip_find_base: found new base at 640

<6>[    0.585009] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p

<7>[    0.585127] gpiochip_find_base: found new base at 608

<6>[    0.585207] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel

<7>[    0.585608] gpiochip_find_base: found new base at 576

<6>[    0.585681] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel

<7>[    0.585844] gpiochip_find_base: found new base at 544

<6>[    0.585924] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg

<7>[    0.586374] gpiochip_find_base: found new base at 512

<6>[    0.586454] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg

<7>[    0.586541] gpiochip_find_base: found new base at 480

<6>[    0.586619] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg

<7>[    0.587072] gpiochip_find_base: found new base at 448

<6>[    0.587145] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg

<6>[    0.588914] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot

<6>[    0.593481] pil_pronto fb21b000.qcom,pronto: using secure boot

<6>[    0.595567] pil_venus fdce0000.qcom,venus: using secure boot

<6>[    0.605272] NET: Registered protocol family 27

<5>[    0.614797] msm_rpm_log_probe: OK

<6>[    0.626504] mpm_counter: [    0.626494]:(265977)

<6>[    0.627225] audit: initializing netlink socket (disabled)

<5>[    0.627339] type=2000 audit(0.600:1): initialized

<4>[    0.628667] highmem bounce pool size: 64 pages

<6>[    0.633591] fuse init (API version 7.18)

<6>[    0.633856] msgmni has been set to 1121

<7>[    0.633943] SELinux:  Registering netfilter hooks

<6>[    0.637552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

<6>[    0.637641] io scheduler noop registered (default)

<6>[    0.637690] io scheduler deadline registered

<6>[    0.637750] io scheduler row registered

<6>[    0.637927] io scheduler cfq registered

<6>[    0.637980] io scheduler test-iosched registered

<7>[    0.638179] gpiochip_find_base: found new base at 444

<6>[    0.638269] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp

<7>[    0.638600] qcom,qpnp-pin qpnp-pin-ee10ec00: qpnp_pin_probe: gpio_chip registered between 444-447

<7>[    0.639584] gpiochip_find_base: found new base at 408

<6>[    0.639660] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio

<7>[    0.640960] qcom,qpnp-pin qpnp-pin-ee110600: qpnp_pin_probe: gpio_chip registered between 408-443

<7>[    0.644364] gpiochip_find_base: found new base at 401

<6>[    0.644449] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp

<7>[    0.644919] qcom,qpnp-pin qpnp-pin-ee110800: qpnp_pin_probe: gpio_chip registered between 401-407

<4>[    0.648400] lm3630_chip_init: bl_initvalue=80

<4>[    0.648489] lm3630_chip_init: bl_initvalue=80,222

<4>[    0.649163] lm3630_probe:yanghai client irq =0

<4>[    0.649214] lm3630_probe:yanghai----

<3>[    0.649301] lm3630_bl 2-0036: LM3630 backlight register OK.

<6>[    0.649628] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000

<6>[    0.649745] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d74000

<3>[    0.649965] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree

<6>[    0.652691] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0

<6>[    0.652848] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel

<6>[    0.653166] mdss_dsi_parse_panel_features: partial_update_enabled=1

<6>[    0.653222] mdss_dsi_parse_panel_features: ulps feature disabled

<6>[    0.653309] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0

<6>[    0.653401] mdss_dsi_panel_init: Continuous splash enabled

<3>[    0.654160] dsi_panel_device_register:1566, lcd 5v en gpio not specified

<6>[    0.654310] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d76800 ctrl_size=1f8 phy_base=c5d78b00 phy_size=2b0

<6>[    0.682537] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi

<6>[    0.682982] mdss_hw_init: MDP Rev=10020001

<6>[    0.684644] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1

<3>[    0.684778] controller config is not present

<3>[    0.684831] mdss_dsi_pref_prim_panel:can't find panel phandle

<3>[    0.684919] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd

<4>[    0.684981] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29

<6>[    0.686928] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5

<6>[    0.688509] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!

<7>[    0.688741] Registered led device: lcd-backlight

<6>[    0.688903] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!

<3>[    0.690052] sps: BAM device 0xf9944000 is not registered yet.

<6>[    0.690147] sps:BAM 0xf9944000 is registered.

<6>[    0.693042] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART

<4>[    0.693172] msm_hs_set_mctrl_locked:Failed.Clocks are OFF

<6>[    0.700898] diagchar initialized nowkgsl bus ib [0] = 2456000000

<4>[    0.702875] kgsl bus ib [1] = 3680000000

<4>[    0.702924] kgsl bus ib [2] = 4912000000

<4>[    0.702972] kgsl bus ib [3] = 7464000000

<4>[    0.703057] kgsl bus index is 3 for pwrlevel 0

<4>[    0.703104] kgsl bus index is 2 for pwrlevel 1

<4>[    0.703151] kgsl bus index is 2 for pwrlevel 2

<4>[    0.703235] kgsl bus index is 1 for pwrlevel 3

<4>[    0.703282] kgsl bus index is 0 for pwrlevel 4

<6>[    0.704512] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU

<6>[    0.711820] brd: module loaded

<6>[    0.714284] loop: module loaded

<4>[    0.714984] QSEECOM: qseecom_probe: support_bus_scaling=0x1

<4>[    0.715040] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2

<4>[    0.715168] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0

<4>[    0.715256] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1

<4>[    0.715380] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0

<4>[    0.715510] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000

<6>[    0.716552] yanghai shineld driver init

<3>[    0.716681] SN3193_power:yuyi for SN3193_SDB gpio---

<6>[    0.822022] SN3193_probe:sn3193 probe

<7>[    0.822208] Registered led device: red

<7>[    0.822270] Registered led device: green

<7>[    0.822338] Registered led device: blue

<4>[    0.823643] i2c-core: driver [tabla-i2c-core] using legacy suspend method

<4>[    0.823730] i2c-core: driver [tabla-i2c-core] using legacy resume method

<4>[    0.823894] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method

<4>[    0.823979] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method

<6>[    0.824062] Loading pn544 driver

<4>[    0.824208] yuyi,clk_prepare_enable,return ret = 0

<6>[    0.824336] pn544_probe : requesting IRQ 345

<6>[    0.842442] SCSI Media Changer driver v0.25

<6>[    0.843596] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24

<6>[    0.844118] spi_qsd f9966000.spi: master is unqueued, this is deprecated

<4>[    0.848676] spi_qsd f9965000.spi: using default bus_num -1

<6>[    0.849098] spi_qsd f9965000.spi: master is unqueued, this is deprecated

<6>[    0.854128] tun: Universal TUN/TAP device driver, 1.6

<6>[    0.854215] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<6>[    0.854362] rmnet_init: BAM devices[9]

<6>[    0.859843] PPP generic driver version 2.4.2

<6>[    0.860002] PPP BSD Compression module registered

<6>[    0.860054] PPP Deflate Compression module registered

<6>[    0.860538] PPP MPPE Compression module registered

<6>[    0.860594] NET: Registered protocol family 24

<6>[    0.860711] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[    0.860761] CSLIP: code copyright 1989 Regents of the University of California.

<6>[    0.861269] wcnss_wlan probed in built-in mode

<6>[    0.862719] usbcore: registered new interface driver asix

<6>[    0.862799] usbcore: registered new interface driver cdc_ether

<6>[    0.862877] usbcore: registered new interface driver net1080

<6>[    0.862955] usbcore: registered new interface driver cdc_subset

<6>[    0.863068] usbcore: registered new interface driver zaurus

<6>[    0.863309] usbcore: registered new interface driver cdc_ncm

<6>[    1.120457] usbcore: registered new interface driver cdc_acm

<6>[    1.120510] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    1.120592] Initializing USB Mass Storage driver...

<6>[    1.120668] usbcore: registered new interface driver usb-storage

<6>[    1.120751] USB Mass Storage support registered.

<6>[    1.120822] usbcore: registered new interface driver ums-alauda

<6>[    1.120928] usbcore: registered new interface driver ums-cypress

<6>[    1.121000] usbcore: registered new interface driver ums-datafab

<6>[    1.121106] usbcore: registered new interface driver ums_eneub6250

<6>[    1.121177] usbcore: registered new interface driver ums-freecom

<6>[    1.121292] usbcore: registered new interface driver ums-isd200

<6>[    1.121366] usbcore: registered new interface driver ums-jumpshot

<6>[    1.121475] usbcore: registered new interface driver ums-karma

<6>[    1.121556] usbcore: registered new interface driver ums-onetouch

<6>[    1.121667] usbcore: registered new interface driver ums-sddr09

<6>[    1.121741] usbcore: registered new interface driver ums-sddr55

<6>[    1.121850] usbcore: registered new interface driver ums-usbat

<6>[    1.122011] usbcore: registered new interface driver usbserial

<6>[    1.122098] usbserial: USB Serial Driver core

<6>[    1.123162] mbim_init: initialize 1 instances

<6>[    1.123315] mbim_init: Initialized 1 ports

<6>[    1.124875] rndis_qc_init: initialize rndis QC instance

<6>[    1.125352]  gadget: Mass Storage Function, version: 2009/09/11

<6>[    1.125405]  gadget: Number of LUNs=1

<6>[    1.125455]  lun0: LUN: removable file: (no medium)

<6>[    1.125797]  gadget: android_usb ready

<6>[    1.127370] mousedev: PS/2 mouse device common for all mice

<6>[    1.127821] usbcore: registered new interface driver xpad

<4>[    1.128072] 8941_l22: Failed to create debugfs directory

<4>[    1.128195] 8941_s3: Failed to create debugfs directory

<3>[    1.632028] [syna] vendor id: 2

<4>[    1.913774] [syna]maxx=1080,maxy=2040,vkh=114

<6>[    1.914006] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0

<4>[    1.914142] [syna]maxx=1080,maxy=2040,vkh=114

<4>[    2.663359] [syna]maxx=1080,maxy=2040,vkh=114

<6>[    2.693140] using rtc device, qpnp_rtc, for alarms

<6>[    2.693245] qcom,qpnp-rtc qpnp-rtc-ee110a00: rtc core: registered qpnp_rtc as rtc0

<6>[    2.693535] i2c /dev entries driver

<6>[    2.695464] ocmem: Notifier registered for 1

<3>[    2.698358] msm_cci_probe: pdev ee0d7e00 device id = -1

<7>[    2.705824] Registered led device: torch-light

<3>[    3.333313] msm_eeprom_platform_probe line 901

<3>[    3.422033] msm_sensor_power_up:985

<4>[    3.442398] [syna]maxx=1080,maxy=2040,vkh=114

<3>[    3.442469] msm_sensor_power_up exit

<3>[    3.442803] msm_sensor_power_down:1169

<3>[    3.461579] msm_sensor_power_down exit

<3>[    3.463295] msm_sensor_power_up:985

<3>[    3.486857] msm_sensor_power_up exit

<3>[    3.487166] msm_sensor_power_down:1169

<3>[    3.508956] msm_sensor_power_down exit

<3>[    3.511451] __msm_jpeg_init:946] Jpeg Device id 0

<3>[    3.511739] __msm_jpeg_init:946] Jpeg Device id 1

<3>[    3.512129] __msm_jpeg_init:946] Jpeg Device id 2

<6>[    3.531271] usbcore: registered new interface driver uvcvideo

<6>[    3.531364] USB Video Class driver (1.1.1)

<4>[    3.532127] i2c-core: driver [bq27541-battery] using legacy suspend method

<4>[    3.532487] i2c-core: driver [bq27541-battery] using legacy resume method

<6>[    3.532816] spmi qpnp-charger-ee110400: Driver qcom,qpnp-charger requests probe deferral

<4>[    3.533031] lfc bq24196_probe

<6>[    3.535643] bq24196 SYS_STS:0x44,fault_reg:0x0

<6>[    3.539804] bq27541-battery 1-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200

<6>[    3.539895] bq27541-battery 1-0055: Complete bq27541 configuration 0x605B

<6>[    3.591637] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

<6>[    3.591795] device-mapper: req-crypt: dm-req-crypt successfully initalized.

<6>[    3.591799]

<6>[    3.591931] Bluetooth: HCI UART driver ver 2.2

<6>[    3.592054] Bluetooth: HCIATH3K protocol initialized

<6>[    3.594099] cpuidle: using governor ladder

<6>[    3.594152] cpuidle: using governor menu

<6>[    3.594266] sdhci: Secure Digital Host Controller Interface driver

<6>[    3.594314] sdhci: Copyright(c) Pierre Ossman

<6>[    3.594395] sdhci-pltfm: SDHCI platform and OF driver helper

<6>[    3.598397] mmc0: no vmmc regulator found

<7>[    3.598674] Registered led device: mmc0::

<6>[    3.599871] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA

<6>[    3.606653] mmc1: no vmmc regulator found

<7>[    3.606844] Registered led device: mmc1::

<6>[    3.608039] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA

<3>[    3.608808] qcom,leds-qpnp leds-qpnp-ee111a00: Regulator get failed(-517)

<3>[    3.608895] qcom,leds-qpnp leds-qpnp-ee111a00: Unable to read flash config data

<6>[    3.608954] spmi leds-qpnp-ee111a00: Driver qcom,leds-qpnp requests probe deferral

<7>[    3.609265] Registered led device: button-backlight

<7>[    3.609638] Registered led device: kpdbl-lut-2

<7>[    3.609833] Registered led device: kpdbl-pwm-3

<7>[    3.610032] Registered led device: kpdbl-pwm-4

<4>[    3.610577] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1

<4>[    3.610630] QCE50: __qce_get_device_tree_data: ce-device =0x0

<4>[    3.610777] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000

<4>[    3.610904] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6300000

<4>[    3.610995] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000

<4>[    3.611081] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.

<6>[    3.611555] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000

<6>[    3.611646] qce qcedev.0: CE device = 0x0

<6>[    3.611648] , IO base, CE = 0xc6300000

<6>[    3.611650] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3

<6>[    3.611652] IO base BAM = 0x0

<6>[    3.611653] BAM IRQ 268

<6>[    3.611654] Engines Availability = 0x1010853

<6>[    3.612062] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004

<6>[    3.612157] sps:BAM 0xfd444000 is registered.

<6>[    3.612513] sps:BAM 0xfd444000 (va:0xc5df0000) enabled: ver:0x20, number of pipes:8

<6>[    3.613037] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268

<4>[    3.614122] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2

<4>[    3.614176] QCE50: __qce_get_device_tree_data: ce-device =0x0

<4>[    3.614333] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000

<4>[    3.614423] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6340000

<4>[    3.614546] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000

<4>[    3.614595] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.

<6>[    3.615481] qcrypto fd440000.qcom,qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000

<6>[    3.615570] qcrypto fd440000.qcom,qcrypto: CE device = 0x0

<6>[    3.615572] , IO base, CE = 0xc6340000

<6>[    3.615573] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5

<6>[    3.615575] IO base BAM = 0x0

<6>[    3.615576] BAM IRQ 268

<6>[    3.615578] Engines Availability = 0x1010853

<6>[    3.616501] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268

<6>[    3.616875] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-aes

<6>[    3.617111] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-aes

<6>[    3.617374] qcrypto fd440000.qcom,qcrypto: qcrypto-ctr-aes

<6>[    3.617614] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-des

<6>[    3.617837] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-des

<6>[    3.618052] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-3des

<6>[    3.618266] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-3des

<6>[    3.618518] qcrypto fd440000.qcom,qcrypto: qcrypto-xts-aes

<6>[    3.618733] qcrypto fd440000.qcom,qcrypto: qcrypto-sha1

<6>[    3.618984] qcrypto fd440000.qcom,qcrypto: qcrypto-sha256

<6>[    3.619197] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-aes

<6>[    3.619448] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-des

<6>[    3.619698] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-3des

<6>[    3.619915] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha1

<6>[    3.620174] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha256

<6>[    3.620406] qcrypto fd440000.qcom,qcrypto: qcrypto-aes-ccm

<6>[    3.620657] qcrypto fd440000.qcom,qcrypto: qcrypto-rfc4309-aes-ccm

<6>[    3.621410] usbcore: registered new interface driver usbhid

<6>[    3.621498] usbhid: USB HID core driver

<6>[    3.622059] ashmem: initialized

<6>[    3.622175] logger: created 256K log 'log_main'

<6>[    3.622322] logger: created 256K log 'log_events'

<6>[    3.622432] logger: created 256K log 'log_radio'

<6>[    3.622585] logger: created 256K log 'log_system'

<6>[    3.623767] sps:BAM 0xf9304000 is registered.

<6>[    3.623839] sps:BAM 0xf9a44000 is registered.

<3>[    3.623970] usb_bam_ipa_create_resources: Failed to create USB_PROD resource

<6>[    3.624486] qcom,qpnp-power-on qpnp-power-on-ee10f600: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot

<6>[    3.624584] qcom,qpnp-power-on qpnp-power-on-ee10f600: PMIC@SID0: Unknown power-off reason

<6>[    3.624873] input: qpnp_pon as /devices/virtual/input/input1

<6>[    3.626318] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm

<6>[    3.627424] pft [pft_init]: Drivr initialized successfully Sep 21 2014 18:50:11.n

<6>[    3.627618] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2

<6>[    3.627840] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0

<6>[    3.628287] kraitbw-l2pm qcom,kraitbw-l2pm.41: BW HWmon governor registered.

<3>[    3.629440] devfreq qcom,cpubw.40: Couldn't update frequency transition information.

<6>[    3.630620] usbcore: registered new interface driver snd-usb-audio

<6>[    3.636765] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp

<6>[    3.637222] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa

<6>[    3.637793] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral

<6>[    3.638126] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral

<6>[    3.639869] ocmem: Notifier registered for 5

<7>[    3.640624] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[    3.640630] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<7>[    3.640746] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[    3.640757] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<6>[    3.641545] oprofile: using arm/armv7-krait

<6>[    3.641650] u32 classifier

<6>[    3.641686]     Actions configured

<6>[    3.641724] Netfilter messages via NETLINK v0.30.

<6>[    3.641820] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

<6>[    3.642084] ctnetlink v0.93: registering with nfnetlink.

<6>[    3.642165] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[    3.642200] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[    3.642342] xt_time: kernel timezone is -0000

<6>[    3.642514] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    3.642671] arp_tables: (C) 2002 David S. Miller

<6>[    3.642730] TCP: cubic registered

<6>[    3.642765] Initializing XFRM netlink socket

<6>[    3.642992] NET: Registered protocol family 10

<6>[    3.644078] Mobile IPv6

<6>[    3.644139] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[    3.644309] IPv6 over IPv4 tunneling driver

<6>[    3.644578] NET: Registered protocol family 17

<6>[    3.644678] NET: Registered protocol family 15

<5>[    3.644769] Bridge firewalling registered

<6>[    3.644823] Ebtables v2.0 registered

<6>[    3.644911] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    3.644965] L2TP core driver, V2.0

<6>[    3.645015] PPPoL2TP kernel driver, V2.0

<6>[    3.645339] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1

<5>[    3.645473] Registering SWP/SWPB emulation handler

<6>[    3.649416] gdsc_oxili_gx: disabling

<6>[    3.649465] gdsc_venus: disabling

<7>[    3.649896] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[    3.649902] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<7>[    3.650007] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[    3.650017] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<3>[    3.650475] qcom,leds-qpnp leds-qpnp-ee111a00: Regulator get failed(-517)

<3>[    3.650540] qcom,leds-qpnp leds-qpnp-ee111a00: Unable to read flash config data

<6>[    3.650580] spmi leds-qpnp-ee111a00: Driver qcom,leds-qpnp requests probe deferral

<7>[    3.651907] gpio_set_debounce: gpio-410 status -22

<7>[    3.652150] gpio_set_debounce: gpio-411 status -22

<7>[    3.652240] gpio_set_debounce: gpio-412 status -22

<7>[    3.652330] gpio_set_debounce: gpio-409 status -22

<7>[    3.652416] gpio_set_debounce: gpio-68 status -22

<6>[    3.652560] input: gpio-keys as /devices/gpio_keys.83/input/input2

<6>[    3.652910] qcom,qpnp-rtc qpnp-rtc-ee110a00: setting system clock to 1970-02-03 21:41:59 UTC (2929319)

<6>[    3.653026] msm_thermal:interrupt_mode_init Interrupt mode init

<6>[    3.653589] clock_late_init: Removing enables held for handed-off clocks

<6>[    3.656001] bq24196_vddmax_set voltage:4350

<3>[    3.656929] bad vbatdet:4250,default to 100mv

<6>[    3.657851] bq24196_ibatmax_set chg_current:2000

<6>[    3.658135] ALSA device list:

<6>[    3.658174]   No soundcards found.

<4>[    3.658234] Warning: unable to open an initial console.

<6>[    3.658331] Freeing init memory: 84K

<6>[    3.659105] trampoline: Running trampoline v23

<6>[    3.659556] trampoline: Initializing devices...

<6>[    3.660547] batfet:

<6>[    3.660709] 8941_smbb_otg:

<6>[    3.660785] 8941_smbb_otg: supplied by 8941_boost

<6>[    3.661063] 8941_smbb_boost: 5000 mV

<6>[    3.662596] trampoline: Done initializing

<3>[    3.662682] trampoline: Loading fstab "/mrom.fstab"...

<6>[    3.662967] trampoline: Waiting for /dev/block/mmcblk0p28

<6>[    3.672676] bq24196_vddmax_set voltage:4350

<6>[    3.673432] bq24196_charge_en enable:0

<6>[    3.678153] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1

<6>[    3.678792] ethernet_phy:

<6>[    3.679643] 8941_mvs1:

<6>[    3.679878] 8941_mvs1: supplied by 8941_smbb_otg

<7>[    3.681867] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[    3.681889] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<6>[    3.682606] mmc0: BKOPS_EN bit = 0

<7>[    3.683596] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[    3.683636] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<7>[    3.685091] Registered led device: led:flash_0

<7>[    3.686036] Registered led device: led:flash_1

<7>[    3.686568] Registered led device: led:flash_torch

<7>[    3.687606] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[    3.687929] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<7>[    3.690337] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[    3.690374] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<6>[    3.707995] mmc0: new HS400 MMC card at address 0001

<6>[    3.708451] mmcblk0: mmc0:0001 MCG8GC 58.2 GiB

<6>[    3.709457] mmcblk0rpmb: mmc0:0001 MCG8GC partition 3 4.00 MiB

<4>[    3.711556] Alternate GPT is invalid, using primary GPT.

<6>[    3.712384]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29

<7>[    3.724036] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[    3.724047] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<7>[    3.724408] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[    3.724426] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<3>[    3.876072] EXT4-fs (mmcblk0p28): Unrecognized mount option "flags=encryptable=/dev/block/mmcblk0p27" or missing value

<3>[    3.877029] trampoline: Failed to mount /realdata with data from fstab, trying all filesystems

<6>[    3.889727] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic

<6>[    3.890225] trampoline: /realdata successfuly mounted with fs ext4

<6>[    3.899398] trampoline: Starting adbd

<3>[    3.900939] trampoline: Running multirom

<3>[    3.916145] multirom: Running MultiROM v32f

<6>[    3.917044] multirom: Loading MultiROM status...

<3>[    3.917353] multirom: Loading fstab "/mrom.fstab"...

<6>[    3.927573] multirom: Adding ROM Internal

<6>[    3.933456] multirom: Adding ROM sailfishos-bacon-release-1

<6>[    3.941902] multirom: Dumping multirom status:

<6>[    3.942526] multirom:   is_second_boot=0

<6>[    3.942766] multirom:   is_running_in_primary_rom=1

<6>[    3.943167] multirom:   current_rom=Internal

<6>[    3.943397] multirom:   colors_v2=0

<6>[    3.943631] multirom:   brightness=40

<6>[    3.944029] multirom:   enable_adb=0

<6>[    3.944258] multirom:   rotation=0

<6>[    3.944486] multirom:   force_generic_fb=0

<6>[    3.944941] multirom:   anim_duration_coef=1.000000

<6>[    3.945174] multirom:   hide_internal=0

<6>[    3.945404] multirom:   int_display_name=NULL

<6>[    3.945798] multirom:   auto_boot_seconds=5

<6>[    3.946026] multirom:   auto_boot_rom=Internal

<6>[    3.946252] multirom:   auto_boot_type=0

<6>[    3.946644] multirom:   curr_rom_part=NULL

<6>[    3.946869] multirom:

<6>[    3.947094] multirom:   ROM: Internal

<6>[    3.947489] multirom:     base_path: /realdata/media/0/multirom/roms/Internal

<6>[    3.947720] multirom:     icon_path: /realdata/media/0/multirom/icons/romic_android.png

<6>[    3.948115] multirom:     type: 0

<6>[    3.948343] multirom:     has_bootimg: 0

<6>[    3.948736] multirom:   ROM: sailfishos-bacon-release-1

<6>[    3.948965] multirom:     base_path: /realdata/media/0/multirom/roms/sailfishos-bacon-release-1

<6>[    3.949368] multirom:     icon_path: /realdata/media/0/multirom/icons/romic_default.png

<6>[    3.949769] multirom:     type: 4

<6>[    3.949998] multirom:     has_bootimg: 1

<3>[    3.950303] multirom: /proc/config.gz is not available!

<3>[    3.950756] multirom: /proc/device-tree was not found!

<6>[    3.952785] multirom: Left Split=0

<6>[    3.953024] multirom: Right Split=0

<6>[    3.966592] multirom: Framebuffer implementation: Qualcomm ION overlay

<6>[    3.984109] multirom: Using universal theme (-1)

<4>[    4.004059] mdss_dsi_on:544 Panel already on.

<3>[    4.009589] lm3630_bank_a_update_status set brightness :  40

<6>[    4.131919] multirom: Dumping multirom status:

<6>[    4.132421] multirom:   is_second_boot=0

<6>[    4.132656] multirom:   is_running_in_primary_rom=1

<6>[    4.133054] multirom:   current_rom=Internal

<6>[    4.133273] multirom:   colors_v2=0

<6>[    4.133509] multirom:   brightness=40

<6>[    4.133748] multirom:   enable_adb=0

<6>[    4.133968] multirom:   rotation=0

<6>[    4.134175] multirom:   force_generic_fb=0

<6>[    4.134551] multirom:   anim_duration_coef=1.000000

<6>[    4.134760] multirom:   hide_internal=0

<6>[    4.135144] multirom:   int_display_name=NULL

<6>[    4.135408] multirom:   auto_boot_seconds=5

<6>[    4.135674] multirom:   auto_boot_rom=Internal

<6>[    4.136261] multirom:   auto_boot_type=0

<6>[    4.136504] multirom:   curr_rom_part=NULL

<6>[    4.136727] multirom:

<6>[    4.137141] multirom:   ROM: Internal

<6>[    4.137374] multirom:     base_path: /realdata/media/0/multirom/roms/Internal

<6>[    4.137793] multirom:     icon_path: /realdata/media/0/multirom/icons/romic_android.png

<6>[    4.138274] multirom:     type: 0

<6>[    4.138631] multirom:     has_bootimg: 0

<6>[    4.138836] multirom:   ROM: sailfishos-bacon-release-1

<6>[    4.139043] multirom:     base_path: /realdata/media/0/multirom/roms/sailfishos-bacon-release-1

<6>[    4.139447] multirom:     icon_path: /realdata/media/0/multirom/icons/romic_default.png

<6>[    4.139859] multirom:     type: 4

<6>[    4.140069] multirom:     has_bootimg: 1

<6>[    4.542133] dwc3 f9200000.dwc3: Avail curr from USB = 500

<6>[    4.546961] bq24196_usb_suspend_enable enable:0

<6>[    4.547924] bq24196_charge_en enable:1

<3>[    4.549922] qpnp_start_charging: qpnp_start_charging:starting to enable charging

<6>[    4.550024] bq24196_iusbmax_set mA:500

<6>[    4.551004] bq24196_vddmax_set voltage:4350

<6>[    4.551936] bq24196_ibatmax_set chg_current:500

<3>[    4.553915] bad vbatdet:4250,default to 100mv

<6>[    4.554955] bq24196_charge_en enable:1

<3>[    8.874426] multirom: No run-on-boot scripts for ROM Internal

<6>[    8.905839] multirom: Saving multirom status

<6>[    8.928031] trampoline: Stopping adbd

<6>[    9.016245] trampoline: Running main_init

<7>[    9.034866] SELinux: 1024 avtab hash slots, 3228 rules.

<7>[    9.035703] SELinux: 1024 avtab hash slots, 3228 rules.

<7>[    9.035714] SELinux:  1 users, 2 roles, 329 types, 1 bools, 1 sens, 1024 cats

<7>[    9.035725] SELinux:  84 classes, 3228 rules

<7>[    9.036128] SELinux:  Completing initialization.

<7>[    9.036133] SELinux:  Setting up existing superblocks.

<7>[    9.036146] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

<7>[    9.036159] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

<7>[    9.036291] SELinux: initialized (dev bdev, type bdev), not configured for labeling

<7>[    9.036302] SELinux: initialized (dev proc, type proc), uses genfs_contexts

<7>[    9.036318] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[    9.036335] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

<7>[    9.046059] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

<7>[    9.046073] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

<7>[    9.046085] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling

<7>[    9.046097] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

<7>[    9.046117] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

<7>[    9.046207] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[    9.046547] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[    9.046575] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

<5>[    9.107952] type=1403 audit(2929324.939:2): policy loaded auid=4294967295 ses=4294967295

<4>[    9.108101] SELinux: Loaded policy from /sepolicy

<4>[    9.110093] SELinux: Loaded file_contexts from /file_contexts

<5>[    9.110346] type=1404 audit(2929324.939:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

<3>[   10.118797] init: could not import file '/init.carrier.rc' from '/init.rc'

<4>[   10.119160] main_init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<3>[   10.119827] init: do_chown: Could not access /selinux/booleans

<3>[   10.121928] init: invalid uid 'fm_radio'

<3>[   10.364469] init: could not open /dev/keychord

<3>[   10.365292] init: cannot open '/initlogo.rle'

<7>[   10.367712] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

<7>[   10.368798] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[   10.375098] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[   10.375760] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[   10.376417] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[   10.381237] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

<6>[   10.388844] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1

<7>[   10.388919] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr

<6>[   10.393299] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

<7>[   10.393500] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr

<6>[   10.462728] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata

<6>[   10.552180] e2fsck: e2fsck 1.41.14 (22-Dec-2010)

<6>[   10.552246] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 53263/3661824 files, 9468102/14627635 blocks

<6>[   10.558172] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic

<7>[   10.558253] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr

<6>[   10.562873] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

<7>[   10.563314] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr

<6>[   10.573063] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache

<6>[   10.593175] e2fsck: e2fsck 1.41.14 (22-Dec-2010)

<6>[   10.593238] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 16/32768 files, 5749/131072 blocks

<6>[   10.597334] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic

<7>[   10.597427] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr

<6>[   10.601035] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc,nomblk_io_submit,errors=panic

<7>[   10.601128] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr

<6>[   10.601147] SELinux:  Context u:object_r:persist_file:s0 is not valid (left unmapped).

<7>[   10.616313] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling

<6>[   10.620900] SELinux:  Context u:object_r:sensors_persist_file:s0 is not valid (left unmapped).

<6>[   10.621534] SELinux:  Context u:object_r:persist_drm_file:s0 is not valid (left unmapped).

<7>[   10.719424] SELinux: 1024 avtab hash slots, 3228 rules.

<7>[   10.719938] SELinux: 1024 avtab hash slots, 3228 rules.

<7>[   10.719947] SELinux:  1 users, 2 roles, 329 types, 1 bools, 1 sens, 1024 cats

<7>[   10.719958] SELinux:  84 classes, 3228 rules

<5>[   10.807226] type=1403 audit(2929326.630:4): policy loaded auid=4294967295 ses=4294967295

<4>[   10.807378] SELinux: Loaded policy from /sepolicy

<4>[   10.809712] SELinux: Loaded file_contexts from /file_contexts

<4>[   10.810490] SELinux: Skipping restorecon_recursive(/data/dontpanic)

<4>[   10.810609] SELinux: Skipping restorecon_recursive(/data/misc)

<4>[   10.814672] SELinux: Skipping restorecon_recursive(/data/.stowaways)

<4>[   10.814794] SELinux: Skipping restorecon_recursive(/data/local)

<4>[   10.814956] SELinux: Skipping restorecon_recursive(/data/app-private)

<4>[   10.815079] SELinux: Skipping restorecon_recursive(/data/app-asec)

<4>[   10.815167] SELinux: Skipping restorecon_recursive(/data/app-lib)

<4>[   10.815261] SELinux: Skipping restorecon_recursive(/data/app)

<4>[   10.815376] SELinux: Skipping restorecon_recursive(/data/property)

<4>[   10.815463] SELinux: Skipping restorecon_recursive(/data/ssh)

<4>[   10.815576] SELinux: Skipping restorecon_recursive(/data/radio)

<4>[   10.815669] SELinux: Skipping restorecon_recursive(/data/dalvik-cache)

<4>[   10.815785] SELinux: Skipping restorecon_recursive(/data/resource-cache)

<4>[   10.815876] SELinux: Skipping restorecon_recursive(/data/lost+found)

<4>[   10.815997] SELinux: Skipping restorecon_recursive(/data/drm)

<4>[   10.816084] SELinux: Skipping restorecon_recursive(/data/mediadrm)

<4>[   10.816791] SELinux: Skipping restorecon_recursive(/data/nfc)

<4>[   12.203636] SELinux: Skipping restorecon_recursive(/data/security)

<4>[   12.204604] SELinux: Skipping restorecon_recursive(/data/connectivity)

<4>[   12.206674] SELinux: Skipping restorecon_recursive(/data/shared)

<4>[   12.208652] SELinux: Skipping restorecon_recursive(/data/time)

<4>[   12.210156] SELinux: Skipping restorecon_recursive(/data/.ssh)

<4>[   12.210591] SELinux: Skipping restorecon_recursive(/data/opponvitems)

<4>[   12.211206] SELinux: Skipping restorecon_recursive(/data/system)

<4>[   12.212248] SELinux: Skipping restorecon_recursive(/data/backup)

<4>[   12.213843] SELinux: Skipping restorecon_recursive(/data/media)

<4>[   12.214681] SELinux: Skipping restorecon_recursive(/data/nfc)

<4>[   12.215388] SELinux: Skipping restorecon_recursive(/data/misc/audio)

<4>[   12.216656] SELinux: Skipping restorecon_recursive(/data/misc/sensors)

<4>[   12.218059] SELinux: Skipping restorecon_recursive(/data/connectivity)

<4>[   12.221161] SELinux: Skipping restorecon_recursive(/data/time)

<6>[   12.260110] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x05a00000 to 0x06e00000

<6>[   12.524062] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset

<6>[   12.580648] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received

<6>[   12.604928] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up

<7>[   12.607389] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[   12.607433] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<6>[   12.608720] apr_tal:Q6 Is Up

<7>[   12.609030] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[   12.609110] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<3>[   12.609682] diag: In diag_send_msg_mask_update, invalid status 0

<3>[   12.609915] diag: In diag_send_log_mask_update, invalid status 0

<6>[   12.611483] adsp-loader qcom,msm-adsp-loader.42: adsp_loader_do: Q6/ADSP image is loaded

<6>[   12.642053] msm_thermal:store_cc_enabled Core control disabled

<6>[   12.643341] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

<3>[   12.645125] healthd: wakealarm_init: timerfd_create failed

<6>[   12.645704] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

<6>[   12.647200] msm_thermal:store_cc_enabled Core control enabled

<6>[   12.654277] warning: `qrngd' uses 32-bit capabilities (legacy support in use)

<3>[   12.655463] init: cannot find '/system/bin/cnd', disabling 'cnd'

<3>[   12.657875] init: service 'console' requires console

<3>[   12.658451] enable_store: android_usb: already disabled

<6>[   12.662936] adb_open

<6>[   12.662991] mtp_bind_config

<7>[   12.665988] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

<6>[   12.679169] 'opened /dev/adsprpc-smd c 244 0'

<6>[   12.702680] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0d100000 to 0x0d139000

<7>[   12.715176] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[   12.715185] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<7>[   12.715409] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe free gpio 422

<6>[   12.715421] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral

<6>[   12.724354] sps:BAM 0xfe104000 (va:0xc6400000) enabled: ver:0x13, number of pipes:31

<6>[   12.724431] sps:BAM 0xfe104000 is registered.

<6>[   12.735438] taiko-slim taiko-slim-pgd: Platform data from device tree

<6>[   12.735643] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0

<6>[   12.735704] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0

<6>[   12.735797] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0

<6>[   12.735890] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0

<6>[   12.735983] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0

<6>[   12.736075] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0

<6>[   12.736138] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0

<6>[   12.736228] taiko-slim taiko-slim-pgd: cdc-vdd-spkdrv: vol=[4500000 4500000]uV, curr=[1250000]uA, ond 1

<6>[   12.736326] taiko-slim taiko-slim-pgd: cdc-vdd-hpmic-switch: vol=[3075000 3075000]uV, curr=[25000]uA, ond 1

<6>[   12.752639] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset

<6>[   12.758350] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08000000 to 0x0d100000

<6>[   12.769520] dwc3 f9200000.dwc3: Avail curr from USB = 2

<6>[   12.769634] android_work: android_work: did not send uevent (0 0   (null))

<6>[   12.769714] bq24196_charge_en enable:0

<6>[   12.776792] msm_thermal:set_enabled enabled = 0

<4>[   12.777807] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xecebb680

<6>[   12.792592] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0

<6>[   12.792671] taiko-slim taiko-slim-pgd: wcd9xxx_slim_device_up: slim device up

<6>[   12.793140] slimbus:1 laddr:0xca, EAPC:0x0:0xa0

<6>[   12.799097] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, major 0x102, minor 0x1, ver 0x2

<6>[   12.799308] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4

<7>[   12.803914] msm8974-asoc-taiko fe02c000.sound: This hardware has 4 pole jack

<6>[   12.803928] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support

<6>[   12.805476] taiko_codec taiko_codec: taiko_codec_probe()

<7>[   12.805593] wcd9xxx_mbhc_init: enter

<7>[   12.807544] wcd9xxx_mbhc_init: leave ret 0

<6>[   12.847165] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

<4>[   12.866213] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time

<4>[   12.867484] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded

<4>[   12.872713] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time

<3>[   12.873887] QSEECOM: qseecom_load_app: scm_call failed resp.result unknown, -38

<3>[   12.873939] QSEECOM: qseecom_ioctl: failed load_app request: -14

<4>[   12.874156] QSEECOM: qseecom_release: data: released = false, type = 1, data = 0xecebb680

<6>[   12.951910] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok

<6>[   12.962502] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok

<6>[   12.963172] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok

<6>[   12.963782] asoc: snd-soc-dummy-dai <-> VoIP mapping ok

<6>[   12.964633] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok

<6>[   12.965164] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok

<6>[   12.965735] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok

<6>[   12.966460] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok

<6>[   12.967016] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok

<6>[   12.967713] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok

<6>[   12.972632] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok

<6>[   12.973332] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok

<6>[   12.976248] dwc3 f9200000.dwc3: Avail curr from USB = 0

<6>[   12.979788] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok

<6>[   12.984273] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok

<6>[   12.984698] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok

<6>[   12.985062] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok

<6>[   12.985404] asoc: snd-soc-dummy-dai <-> LSM1 mapping ok

<6>[   12.985771] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok

<6>[   12.986224] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok

<6>[   12.987365] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok

<6>[   12.988547] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok

<6>[   12.988800] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok

<6>[   12.989156] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok

<6>[   12.989378] asoc: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok

<6>[   12.989693] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok

<6>[   12.990747] asoc: snd-soc-dummy-dai <-> LSM2 mapping ok

<6>[   12.991149] asoc: snd-soc-dummy-dai <-> LSM3 mapping ok

<6>[   12.991762] asoc: snd-soc-dummy-dai <-> LSM4 mapping ok

<6>[   12.992300] asoc: snd-soc-dummy-dai <-> LSM5 mapping ok

<6>[   12.993055] asoc: snd-soc-dummy-dai <-> LSM6 mapping ok

<6>[   12.994458] asoc: snd-soc-dummy-dai <-> LSM7 mapping ok

<6>[   12.994957] asoc: snd-soc-dummy-dai <-> LSM8 mapping ok

<6>[   12.996104] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok

<6>[   12.997143] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok

<6>[   12.997911] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok

<6>[   13.001225] asoc: snd-soc-dummy-dai <-> MultiMedia9 mapping ok

<6>[   13.002156] asoc: snd-soc-dummy-dai <-> VoWLAN mapping ok

<6>[   13.002664] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok

<6>[   13.004077] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok

<6>[   13.005382] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok

<6>[   13.006462] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok

<6>[   13.007117] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok

<6>[   13.007887] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok

<6>[   13.008439] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok

<6>[   13.009711] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok

<6>[   13.010170] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok

<6>[   13.010619] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok

<6>[   13.011341] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384

<7>[   13.011961] msm_afe_set_config: enter

<7>[   13.017402] wcd9xxx_mbhc_start: enter

<7>[   13.017942] wcd9xxx_init_and_calibrate: enter

<7>[   13.017948] msm_snd_enable_codec_ext_clk: enable = 1 clk_users = 0

<7>[   13.018265] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_BG_AUDIO_ON(11)

<7>[   13.018271] wcd9xxx_event_notify: leave

<7>[   13.019647] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_BG_AUDIO_ON(12)

<7>[   13.019652] wcd9xxx_event_notify: leave

<7>[   13.019658] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_MCLK_ON(5)

<7>[   13.019662] wcd9xxx_event_notify: leave

<7>[   13.021533] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MCLK_ON(6)

<7>[   13.021542] wcd9xxx_update_mbhc_clk_rate: Updating clock rate dependents, rate = 9600000

<7>[   13.022094] wcd9xxx_update_mbhc_clk_rate: leave

<7>[   13.022318] wcd9xxx_event_notify: leave

<7>[   13.022324] wcd9xxx_mbhc_setup: enter

<7>[   13.027183] wcd9xxx_mbhc_setup: leave

<7>[   13.027188] wcd9xxx_mbhc_cal: enter

<3>[   13.068077] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0x1

<6>[   13.086229] android_work: android_work: sent uevent USB_STATE=CONNECTED

<6>[   13.108782] android_usb gadget: high-speed config #1: fe8050c8.android_usb

<6>[   13.109000] dwc3 f9200000.dwc3: Avail curr from USB = 500

<7>[   13.111115] wcd9xxx_mbhc_cal: dce_z with nsc cs: 0xf7ba

<6>[   13.113637] bq24196_usb_suspend_enable enable:0

<3>[   13.114071] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0x1

<6>[   13.114494] bq24196_charge_en enable:1

<3>[   13.116329] qpnp_start_charging: qpnp_start_charging:starting to enable charging

<6>[   13.116452] bq24196_iusbmax_set mA:500

<6>[   13.117248] bq24196_vddmax_set voltage:4350

<6>[   13.118064] bq24196_ibatmax_set chg_current:500

<3>[   13.118859] bad vbatdet:4250,default to 100mv

<6>[   13.119655] bq24196_charge_en enable:1

<3>[   13.157312] MSM-CPP msm_cpp_poll:451 Poll failed: expect: 0xabcdefaa

<6>[   13.157361] MSM-CPP cpp_load_fw:855 MC Bootloader Version: 0x3e646d63

<6>[   13.162207] android_work: android_work: sent uevent USB_STATE=CONFIGURED

<6>[   13.173473] MSM-CPP cpp_load_fw:867 CPP FW Version: 0x1002000a

<7>[   13.243856] wcd9xxx_mbhc_cal: leave

<7>[   13.243862] wcd9xxx_mbhc_calc_thres: enter

<7>[   13.243868] wcd9xxx_mbhc_calc_thres: v_ins_h for current source: 0xf8b3

<7>[   13.243874] wcd9xxx_mbhc_calc_thres: leave

<7>[   13.243880] msm_snd_enable_codec_ext_clk: enable = 0 clk_users = 1

<7>[   13.243887] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_MCLK_OFF(7)

<7>[   13.244513] wcd9xxx_event_notify: leave

<7>[   13.245054] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MCLK_OFF(8)

<7>[   13.245059] wcd9xxx_event_notify: leave

<7>[   13.245066] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_BG_OFF(9)

<7>[   13.245071] wcd9xxx_event_notify: leave

<7>[   13.245319] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_BG_OFF(10)

<7>[   13.245323] wcd9xxx_event_notify: leave

<7>[   13.248444] wcd9xxx_init_and_calibrate: Setting up codec own insert detection

<7>[   13.248451] wcd9xxx_insert_detect_setup: Setting up insert detection

<7>[   13.248640] wcd9xxx_init_and_calibrate: leave

<7>[   13.248646] wcd9xxx_mbhc_start: leave 0

<6>[   13.248693] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok

<6>[   13.250050] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok

<6>[   13.250242] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok

<6>[   13.251388] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok

<6>[   13.251617] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok

<6>[   13.251839] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok

<6>[   13.252087] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok

<6>[   13.252296] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok

<6>[   13.252500] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok

<6>[   13.252748] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok

<6>[   13.252950] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok

<6>[   13.253659] asoc: msm-stub-rx <-> msm-dai-q6-dev.32770 mapping ok

<6>[   13.271434] input: msm8974-taiko-mtp-snd-card Button Jack as /devices/fe02c000.sound/sound/card0/input3

<6>[   13.271744] input: msm8974-taiko-mtp-snd-card Headset Jack as /devices/fe02c000.sound/sound/card0/input4

<7>[   13.272532] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[PRIM_AUXPCM_CLK] =

<7>[   13.272535] 0x41

<7>[   13.272550] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[PRIM_AUXPCM_SYNC] =

<7>[   13.272554] 0x42

<7>[   13.272567] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[PRIM_AUXPCM_DIN] =

<7>[   13.272570] 0x43

<7>[   13.272585] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[PRIM_AUXPCM_DOUT] =

<7>[   13.272588] 0x44

<7>[   13.272605] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[SEC_AUXPCM_CLK] =

<7>[   13.272607] 0x4f

<7>[   13.272622] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[SEC_AUXPCM_SYNC] =

<7>[   13.272624] 0x50

<7>[   13.272638] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[SEC_AUXPCM_DIN] =

<7>[   13.272640] 0x51

<7>[   13.272654] msm8974-asoc-taiko fe02c000.sound: msm8974_dtparse_auxpcm:GPIO gpio[SEC_AUXPCM_DOUT] =

<7>[   13.272656] 0x52

<7>[   13.272665] msm8974-asoc-taiko fe02c000.sound: Couldn't find qcom,ext-ult-lo-amp-gpio property in node /soc/sound, -22

<7>[   13.272681] msm8974-asoc-taiko fe02c000.sound: qcom,us-euro-gpios detected 87

<7>[   13.272688] msm8974-asoc-taiko fe02c000.sound: msm8974_prepare_us_euro : us_euro gpio request 87

<6>[   13.337734] mdss_dsi_update_gamma_index: update gamma index=0

<6>[   13.341884] mdss_dsi_update_color_enhance: enabled = 0

<6>[   13.341991] mdss_dsi_update_cabc_level: update cabc level=0 (0) sre=0 (0)

<7>[   13.505038] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<6>[   13.585406] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset

<3>[   13.656813] Notify: smsm init

<6>[   13.694747] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received

<6>[   13.694778] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up

<3>[   13.755854] msm_ipc_router_send_control_msg: xprt_info not initialized

<3>[   13.839631] msm_pcm_volume_ctl_get substream runtime not found

<3>[   13.839750] msm_pcm_volume_ctl_get substream runtime not found

<3>[   13.839949] msm_pcm_volume_ctl_get substream runtime not found

<3>[   13.840258] msm_pcm_volume_ctl_get substream runtime not found

<7>[   13.840387] msm8974_get_spk: msm8974_spk_control = 1

<7>[   13.840413] msm_slim_0_rx_ch_get: msm_slim_0_rx_ch  = 1

<7>[   13.840442] msm_slim_0_tx_ch_get: msm_slim_0_tx_ch  = 1

<7>[   13.840493] msm_hdmi_rx_ch_get: msm_hdmi_rx_ch  = 2

<7>[   13.840522] slim0_rx_bit_format_get: slim0_rx_bit_format = 2, ucontrol value = 0

<7>[   13.840549] slim0_rx_sample_rate_get: slim0_rx_sample_rate = 48000

<7>[   13.840575] hdmi_rx_bit_format_get: hdmi_rx_bit_format = 2, ucontrol value = 0

<7>[   13.840606] msm_proxy_rx_ch_get: msm_proxy_rx_ch = 2

<7>[   13.840635] msm_btsco_rate_get: msm_btsco_rate  = 8000

<7>[   13.840663] hdmi_rx_sample_rate_get: hdmi_rx_sample_rate = 48000

<7>[   13.852311] msm_btsco_rate_get: msm_btsco_rate  = 8000

<7>[   13.852335] msm_btsco_rate_put: msm_btsco_rate = 8000

<3>[   13.880383] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=21 handle=ecd43f00

<6>[   14.243162] apr_tal:Modem Is Up

<3>[   14.249461] diag: In diag_send_msg_mask_update, invalid status 0

<3>[   14.249516] diag: In diag_send_log_mask_update, invalid status 0

<6>[   14.760656] sps:BAM 0xfc834000 is registered.

<6>[   14.761190] sps:BAM 0xfc834000 (va:0xc5a08000) enabled: ver:0x20, number of pipes:6

<3>[   15.283235] smd_pkt_open: DATA17_CNTL open failed -19

<6>[   15.770232] wcnss_wlan triggered by userspace

<3>[   15.802075] wcnss_trigger_config:  adc get failed

<6>[   15.809712] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x06e00000 to 0x0740f000

<6>[   15.926775] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset

<6>[   16.905056] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up

<3>[   16.919203] diag: In diag_send_msg_mask_update, invalid status 0

<3>[   16.919303] diag: In diag_send_log_mask_update, invalid status 0

<6>[   16.995792] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received

<6>[   17.207982] wcnss_wlan_ctrl_probe: SMD ctrl channel up

<6>[   17.208069] wcnss: version 01050102

<6>[   17.208144] wcnss: schedule dnld work for pronto

<6>[   17.208865] wcnss: build version MSM8974-PR_1_4_c2-00125

<4>[   18.491541] lowmem_shrink: convert oom_adj to oom_score_adj:

<4>[   18.491615] oom_adj 0 => oom_score_adj 0

<4>[   18.491653] oom_adj 1 => oom_score_adj 58

<4>[   18.491724] oom_adj 2 => oom_score_adj 117

<4>[   18.491764] oom_adj 3 => oom_score_adj 176

<4>[   18.491801] oom_adj 9 => oom_score_adj 529

<4>[   18.491870] oom_adj 15 => oom_score_adj 1000

<6>[   19.039368] acc_open

<6>[   19.039416] acc_release

<3>[   19.209132] lm3630_bank_a_update_status set brightness :  102

<6>[   19.328181] wlan: loading driver v3.2.3.172

<6>[   19.752013] wcnss: NV download

<6>[   19.754133] wcnss: NV bin size: 29812, total_fragments: 10

<3>[   19.754243] wcnss: no space available for smd frame

<3>[   19.782051] wcnss: no space available for smd frame

<3>[   19.812048] wcnss: no space available for smd frame

<3>[   19.842121] wcnss: no space available for smd frame

<3>[   19.895081] wcnss: not setting up vbatt

<3>[   20.333460] wlan: [790:E :HDD] hdd_apply_cfg_ini: Reg Parameter gTDLSTxStatsPeriod < allowed Minimum [500 < 2000]. Enforcing Default= 5000

<3>[   20.334582] wlan: [790:E :VOS] INFO: NV binary file version=2 Driver default NV version=2, continue...

<3>[   20.334584]

<6>[   20.336882] DefaultCountry is 00

<3>[   20.343299] wlan: [790:E :HDD] hdd_wlan_startup: WLAN Mac Addr: c0:ee:fb:21:9b:63

<3>[   20.343346] wlan: [790:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: c0:ee:fb:e1:7a:f8

<3>[   20.343420] wlan: [790:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: c0:ee:fb:e1:7a:f9

<3>[   20.343493] wlan: [790:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: c0:ee:fb:e1:7a:fa

<6>[   27.222148] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS

<6>[   29.328999] wlan: WCNSS WLAN version 1.5.1.2

<6>[   29.329072] wlan: WCNSS software version MSM8974-PR_1_4_c2-00125

<6>[   29.329113] wlan: WCNSS hardware version WCN v2.0 RadioPhy vIris_TSMC_3.0 with 48MHz XO

<3>[   29.329184] wlan: [790:E :CTL] Host caps 14c001ff 0 0 80000000

<3>[   29.329186]

<3>[   29.329257] wlan: [790:E :CTL] Host Capability

<3>[   29.329327] wlan: [790:E :CTL] 		MCC, P2P, DOT11AC, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, TDLS, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, WOW, WLAN_ROAM_SCAN_OFFLOAD, ,

<3>[   29.330729] wlan: [1059:E :CTL] FW caps 7df877ff 8 0 0

<3>[   29.330731]

<3>[   29.330836] wlan: [1059:E :CTL] Firmware Capability

<3>[   29.330877] wlan: [1059:E :CTL] 		MCC, P2P, DOT11AC, SLM_SESSIONIZATION, DOT11AC_OPMODE, SAP32STA, TDLS, P2P_GO_NOA_DECOUPLE_INIT_SCAN, WLANACTIVE_OFFLOAD, BEACON_OFFLOAD, SCAN_OFFLOAD, BCN_MISS_OFFLOAD, STA_POWERSAVE, , BCN_FILTER, RTT, RATECTRL, WOW, WLAN_ROAM_SCAN_OFFLOAD, , , , , ,

<6>[   29.346458] wlan: driver loaded

<3>[   29.566365] wlan: [1086:E :PMC] PMC: STA not associated with an AP with single active session. BMPS cannot be entered

<6>[   29.566714] ADDRCONF(NETDEV_UP): wlan0: link is not ready

<3>[   29.602416] wlan: [1086:E :HDD] wlan_hdd_cfg80211_flush_pmksa: Invalid entry to delete

<3>[   29.636957] wlan: [1086:E :PMC] PMC: STA not associated with an AP with single active session. BMPS cannot be entered

<6>[   29.637300] ADDRCONF(NETDEV_UP): p2p0: link is not ready

<3>[   29.672361] wlan: [1086:E :HDD] wlan_hdd_cfg80211_flush_pmksa: Invalid entry to delete

<3>[   29.709237] wlan: [1059:E :CTL] Operation 2147483647 is not yet implemented

<6>[   29.830744] cfg80211: Calling CRDA for country: NL

<6>[   29.830891] cfg80211: Regulatory domain changed to country: NL

<6>[   29.830969] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

<6>[   29.831012] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

<6>[   29.831086] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)

<6>[   29.831160] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)

<6>[   29.831204] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)

<6>[   29.831282] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)

<3>[   29.996859] pn544_dev_open : 10,58

<4>[   29.996910] pn544_dev_ioctl power on

<4>[   30.114216] pn544_dev_ioctl power off

<4>[   30.272088] pn544_dev_ioctl power on

<6>[   30.342445] mtp_open

<6>[   30.422031] Releasing sensor regulator

<6>[   30.671870] calling msm_rng_bus_scale(LOW)

<6>[   30.724026] mdss_dsi_update_cabc_level: update cabc level=1 (0) sre=0 (0)

<6>[   30.774157] mdss_dsi_update_color_enhance: enabled = 1

<3>[   32.576883] qup_i2c f9928000.i2c: QUP: I2C status flags :0x81343c8, irq:132

<3>[   32.577594] qup_i2c f9928000.i2c: I2C slave addr:0x28 not connected

<3>[   32.578086] pn544_dev_write : i2c_master_send returned -107

<7>[   33.085857] msm8974_snd_startup(): substream = subdevice #0  stream = 0

<7>[   33.086607] msm_slim_0_rx_be_hw_params_fixup()

<7>[   33.086614] msm_slim_0_rx_be_hw_params_fixup: format = 2, rate = 48000, channels = 1

<7>[   33.086621] msm_snd_hw_params: rx_0_ch=1

<7>[   33.098029] msm8974_mclk_event: event = 1

<7>[   33.098037] msm_snd_enable_codec_ext_clk: enable = 1 clk_users = 0

<7>[   33.098301] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_BG_AUDIO_ON(11)

<7>[   33.098307] wcd9xxx_event_notify: leave

<7>[   33.099790] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_BG_AUDIO_ON(12)

<7>[   33.099796] wcd9xxx_event_notify: leave

<7>[   33.099804] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_MCLK_ON(5)

<7>[   33.099809] wcd9xxx_event_notify: leave

<7>[   33.101694] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MCLK_ON(6)

<7>[   33.101704] wcd9xxx_update_mbhc_clk_rate: Updating clock rate dependents, rate = 9600000

<7>[   33.102325] wcd9xxx_update_mbhc_clk_rate: leave

<7>[   33.102609] wcd9xxx_event_notify: leave

<7>[   33.126204] msm_ext_spkramp_event()

<7>[   33.126212] msm8974_oppo_ext_spk_power_amp_on Turn on amp, spk=2

<7>[   33.126221] msm_ext_spkramp_event()

<7>[   33.126227] msm8974_oppo_ext_spk_power_amp_on Turn on amp, spk=1

<3>[   33.145507] adm_callback: cmd = 0x10328 returned error = 0x2

<3>[   36.499146] qup_i2c f9928000.i2c: QUP: I2C status flags :0x1363c8, irq:132

<3>[   36.499282] qup_i2c f9928000.i2c: I2C slave addr:0x28 not connected

<3>[   36.499363] pn544_dev_write : i2c_master_send returned -107

<3>[   36.866324] wlan: [1059:E :CTL] Operation 2147483647 is not yet implemented

<3>[   36.987962] wlan: [1059:E :CTL] Operation 2147483647 is not yet implemented

<3>[   37.281192] wlan: [1059:E :PE ] wlan_cfgGetInt: 348: Not valid cfg id 1

<6>[   37.305861] wlan: connected to 20:25:64:d3:fb:de

<6>[   37.305939] wlan(40) 20:25:64:d3:fb:de Standalone

<6>[   37.306582] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

<3>[   37.329674] wlan: [1086:E :SME] sme_FTUpdateKey: Unhandled state=0

<3>[   37.330039] wlan: [1086:E :SME] sme_FTUpdateKey: Unhandled state=0

<3>[   37.357908] wlan: [1086:E :HDD] Batch scan is not yet enabled could not return resultsBatch Scan state 1

<3>[   37.358907] wlan: [1086:E :HDD] Batch scan is not yet enabled batch scan state 1

<3>[   37.994528] wlan: [1059:E :CTL] Operation 2147483647 is not yet implemented

<3>[   38.325434] wlan: [1059:E :CTL] Operation 2147483647 is not yet implemented

<7>[   39.731362] msm8974_snd_shudown(): substream = subdevice #0 stream = 0

<7>[   39.741469] msm_ext_spkramp_event()

<7>[   39.741480] msm8974_oppo_ext_spk_power_amp_off: Turn off amp, spk=2

<7>[   39.741488] msm_ext_spkramp_event()

<7>[   39.741493] msm8974_oppo_ext_spk_power_amp_off: Turn off amp, spk=1

<7>[   39.753996] msm8974_mclk_event: event = 8

<7>[   39.754002] msm_snd_enable_codec_ext_clk: enable = 0 clk_users = 1

<7>[   39.754009] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_MCLK_OFF(7)

<7>[   39.754232] wcd9xxx_event_notify: leave

<7>[   39.754706] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_MCLK_OFF(8)

<7>[   39.754711] wcd9xxx_event_notify: leave

<7>[   39.754716] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_PRE_BG_OFF(9)

<7>[   39.754720] wcd9xxx_event_notify: leave

<7>[   39.754941] wcd9xxx_event_notify: enter event WCD9XXX_EVENT_POST_BG_OFF(10)

<7>[   39.754945] wcd9xxx_event_notify: leave

<3>[   43.993346] wlan: [1059:E :SME] sme_QosPmcDeviceStateUpdateInd: 7330: nothing to process in PMC state 6

<3>[   43.993493] wlan: [1059:E :TL ]  ----> CRegion 0, hRSSI 0, Alpha 5

<6>[   47.057027] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

<3>[   47.263529] wlan: [1059:E :PE ] limProcessAddBaInd: 5620: BA setup for staId = 3, TID: 0, SSN: 58

<3>[   47.264292] wlan: [1059:E :PE ] __limProcessAddBARsp: 1447: ADDBA Rsp from STA with AID 1, tid = 0, status = 0

<3>[   47.325302] wlan: [11:E :HDD] tdls_mgmt: 18:55:0f:b3:c4:9f action 10, dialog_token 1 status 0, len = 0

<3>[   47.325440] wlan: [1059:E :PE ] [TDLS] action 10 (TDLS_DIS_REQ) -AP-> OTA