API tools faq
paste
Advertisement
Mafarricos

EC-MK808B+ dmesg

Mafarricos
Jun 22nd, 2015
79
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 78.69 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Booting Linux on physical CPU 0x200
  2. [ 0.000000@0] Linux version 3.10.33 (kszaq@FPGAWorker) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jun 10 00:16:50 CEST 2015
  3. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  4. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
  6. [ 0.000000@0] physical memory start address is 0x200000
  7. [ 0.000000@0] reserved_end is dffffff
  8. [ 0.000000@0]
  9. [ 0.000000@0] Total memory is 1022 MiB
  10. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0dffffff, size: 128 MiB
  11. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  12. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  13. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  14. [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)
  15. [ 0.000000@0] vdec0(low) : 0x09a00000 - 0x0da00000 ( 64 MiB)
  16. [ 0.000000@0] ppmgr0(high) : 0x3cf00000 - 0x3df00000 ( 16 MiB)
  17. [ 0.000000@0] amvideocap0(low) : 0x0da00000 - 0x0e000000 ( 6 MiB)
  18. [ 0.000000@0] get storage device: storage 1
  19. [ 0.000000@0] value=1
  20. [ 0.000000@0] get_storage_device : get storage device: storage 1
  21. [ 0.000000@0] get_storage_device : value=1
  22. [ 0.000000@0] [get_storage_device] storage_flag=1
  23. [ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
  24. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  25. [ 0.000000@0] On node 0 totalpages: 212736
  26. [ 0.000000@0] free_area_init_node: node 0, pgdat c0839f00, node_mem_map c0a7e000
  27. [ 0.000000@0] Normal zone: 1520 pages used for memmap
  28. [ 0.000000@0] Normal zone: 0 pages reserved
  29. [ 0.000000@0] Normal zone: 158208 pages, LIFO batch:31
  30. [ 0.000000@0] HighMem zone: 426 pages used for memmap
  31. [ 0.000000@0] HighMem zone: 54528 pages, LIFO batch:15
  32. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  33. [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1228000 s7680 r8192 d12800 u32768
  34. [ 0.000000@0] pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
  35. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  36. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211216
  37. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=1 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= boot=/dev/system disk=/dev/data BOOT_IMAGE=/dev/boot console=tty0 consoleblank=0 scaling_governor=ondemand scaling_min_freq=96000 scaling_max_freq=1536000 systemd.show_status=auto hdmitx=cecf
  38. [ 0.000000@0] cvbs performance line = 0
  39. [ 0.000000@0] cvbs trimming line = 0xa000
  40. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
  41. [ 0.000000@0] osd1:1
  42. [ 0.000000@0] loaded:268435459
  43. [ 0.000000@0] logo has been loaded
  44. [ 0.000000@0] 720p:11
  45. [ 0.000000@0] full:2
  46. [ 0.000000@0] kernel get hdmimode form uboot is 720p
  47. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  48. [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
  49. [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
  50. [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
  51. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  52. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  53. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  54. [ 0.000000@0] Memory: 64MB 16MB 751MB = 831MB total
  55. [ 0.000000@0] Memory: 827996k/827996k available, 22948k reserved, 218112K highmem
  56. [ 0.000000@0] Virtual kernel memory layout:
  57. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  58. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  59. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  60. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  61. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  62. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  63. [ 0.000000@0] .text : 0xc0008000 - 0xc07a4f70 (7796 kB)
  64. [ 0.000000@0] .init : 0xc07a5000 - 0xc07dae00 ( 216 kB)
  65. [ 0.000000@0] .data : 0xc07dc000 - 0xc083ad58 ( 380 kB)
  66. [ 0.000000@0] .bss : 0xc083ad58 - 0xc0a79ae4 (2300 kB)
  67. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  68. [ 0.000000@0] Hierarchical RCU implementation.
  69. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  70. [ 0.000000@0] NR_IRQS:256
  71. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  72. [ 0.000000@0] Global timer: MESON TIMER-F (c07f6040) initialized
  73. [ 0.000000@0] Switching to timer-based delay loop
  74. [ 0.000000@0] Console: colour dummy device 80x30
  75. [ 0.000000@0] console [tty0] enabled
  76. [ 0.000000@0] meson_serial_console_setup
  77. [ 0.000000@0] console [ttyS0] enabled
  78. [ 0.389914@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  79. [ 0.400206@0] pid_max: default: 32768 minimum: 301
  80. [ 0.405212@0] Mount-cache hash table entries: 512
  81. [ 0.410881@0] CPU: Testing write buffer coherency: ok
  82. [ 0.415060@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  83. [ 0.420585@0] Setting up static identity map for 0xc059bc60 - 0xc059bcb8
  84. [ 0.427235@0] L310 cache controller enabled
  85. [ 0.431311@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  86. [ 0.438711@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  87. [ 0.446859@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  88. [ 0.454044@1] CPU1: Booted secondary processor
  89. [ 0.454066@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  90. [ 0.454504@2] CPU2: Booted secondary processor
  91. [ 0.454526@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  92. [ 0.454956@3] CPU3: Booted secondary processor
  93. [ 0.454978@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  94. [ 0.455085@0] Brought up 4 CPUs
  95. [ 0.486872@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  96. [ 0.493096@0] CPU: All CPU(s) started in SVC mode.
  97. [ 0.498642@0] devtmpfs: initialized
  98. [ 0.510376@0] clkrate [ xtal ] : 24000000
  99. [ 0.510429@0] clkrate [ pll_sys ] : 792000000
  100. [ 0.513274@0] clkrate [ pll_fixed ] : 2550000000
  101. [ 0.517949@0] clkrate [ pll_vid ] : 366000000
  102. [ 0.522379@0] clkrate [ pll_ddr ] : 0
  103. [ 0.526089@0] clkrate [ a9_clk ] : 792000000
  104. [ 0.530430@0] clkrate [ clk81 ] : 159375000
  105. [ 0.535783@0] pinctrl core: initialized pinctrl subsystem
  106. [ 0.540648@0] regulator-dummy: no parameters
  107. [ 0.544652@0] NET: Registered protocol family 16
  108. [ 0.553636@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  109. [ 0.559007@0] VPU driver version: v02
  110. [ 0.559599@0] load vpu_clk in dts: 182150000Hz(3)
  111. [ 0.564411@0] vpu_probe OK
  112. [ 0.575615@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  113. [ 0.576431@0] register lm device lm-root
  114. [ 0.579628@0] register lm device lm1
  115. [ 0.583200@0] register lm device lm0
  116. [ 0.586995@0] Init pinux probe!
  117. [ 0.590629@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  118. [ 0.595879@0] -------early_init_dt_init:115----------
  119. [ 0.600531@0] tv_init_module
  120. [ 0.603374@0] major number 254 for disp
  121. [ 0.607174@0] vout_register_server
  122. [ 0.610562@0] register tv module server ok
  123. [ 0.614799@0] aml_i2c version: 20140813
  124. [ 0.618501@0] plat->state_name:default
  125. [ 0.618522@0] master_no = 0, master_regs=fe600500
  126. [ 0.618792@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef3348a8)
  127. [ 0.624522@0] aml-i2c i2c-AO: aml i2c bus driver.
  128. [ 0.629336@0] plat->state_name:default
  129. [ 0.629359@0] master_no = 2, master_regs=fe1087c0
  130. [ 0.629599@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ef334ca8)
  131. [ 0.635170@0] aml-i2c i2c-B: aml i2c bus driver.
  132. [ 0.639910@0] plat->state_name:default
  133. [ 0.639932@0] master_no = 3, master_regs=fe1087e0
  134. [ 0.640164@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ef3350a8)
  135. [ 0.645710@0] aml-i2c i2c-C: aml i2c bus driver.
  136. [ 0.650494@0] plat->state_name:default
  137. [ 0.650515@0] master_no = 4, master_regs=fe108d20
  138. [ 0.650753@0] aml-i2c i2c-D: add adapter aml_i2c_adap4(ef3354a8)
  139. [ 0.656274@0] aml-i2c i2c-D: aml i2c bus driver.
  140. [ 0.661202@0] call aml_dvfs_init in
  141. [ 0.664403@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
  142. [ 0.664417@0] [DVFS]dvfs table of vcck_dvfs is:
  143. [ 0.664427@0] [DVFS] freq, min_uV, max_uV
  144. [ 0.664437@0] [DVFS] 96000, 860000, 860000
  145. [ 0.664446@0] [DVFS] 192000, 860000, 860000
  146. [ 0.664455@0] [DVFS] 312000, 860000, 860000
  147. [ 0.664464@0] [DVFS] 408000, 860000, 860000
  148. [ 0.664473@0] [DVFS] 504000, 860000, 860000
  149. [ 0.664482@0] [DVFS] 600000, 860000, 860000
  150. [ 0.664491@0] [DVFS] 720000, 860000, 860000
  151. [ 0.664500@0] [DVFS] 816000, 900000, 900000
  152. [ 0.664509@0] [DVFS] 1008000, 920000, 920000
  153. [ 0.664519@0] [DVFS] 1200000, 970000, 970000
  154. [ 0.664528@0] [DVFS] 1320000, 1100000, 1100000
  155. [ 0.664537@0] [DVFS] 1488000, 1100000, 1100000
  156. [ 0.664546@0] [DVFS] 1536000, 1140000, 1140000
  157. [ 0.664837@0] hdmitx: system: amhdmitx_init
  158. [ 0.668479@0] hdmitx: system: Ver: 2014May6
  159. [ 0.672780@0] hdmitx: system: amhdmitx_probe
  160. [ 0.677784@0] hdmitx: system: gate/pwr cmd: 7
  161. [ 0.681237@0] hdmitx: system: ALREADY init VIC = 4
  162. [ 0.685969@0] hdmitx: system: gate/pwr cmd: 0
  163. [ 0.690780@1] hdmitx: system: reset intr mask
  164. [ 0.714113@0] hdmitx: system: irq 1
  165. [ 0.778997@0] bio: create slab <bio-0> at 0
  166. [ 0.780327@0] SCSI subsystem initialized
  167. [ 0.782161@0] usbcore: registered new interface driver usbfs
  168. [ 0.787279@0] usbcore: registered new interface driver hub
  169. [ 0.792766@0] usbcore: registered new device driver usb
  170. [ 0.798919@0] mode is 11,sync_duration_den=1,sync_duration_num=60
  171. [ 0.803847@0] request vpu clk holdings: vencp 106250000Hz
  172. [ 0.809175@0] TV mode 720p selected.
  173. [ 0.812742@0] already display in uboot
  174. [ 0.821322@0] call aml_pmu_probe_init in
  175. [ 0.821733@0] get property: use_pwm, value:0x00000001, dec: 1
  176. [ 0.824529@1] hdmitx: system: gate/pwr cmd: 4
  177. [ 0.832408@0] get property: table_count, value:0x0000001d, dec: 29
  178. [ 0.840111@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
  179. [ 0.847273@0] 0, 001c0000, 860000
  180. [ 0.850746@0] 1, 001b0001, 870000
  181. [ 0.854206@0] 2, 001a0002, 880000
  182. [ 0.857663@0] 3, 00190003, 890000
  183. [ 0.861136@0] 4, 00180004, 900000
  184. [ 0.864590@0] 5, 00170005, 910000
  185. [ 0.868053@0] 6, 00160006, 920000
  186. [ 0.871531@0] 7, 00150007, 930000
  187. [ 0.874980@0] 8, 00140008, 940000
  188. [ 0.878444@0] 9, 00130009, 950000
  189. [ 0.881917@0] 10, 0012000a, 960000
  190. [ 0.885376@0] 11, 0011000b, 970000
  191. [ 0.888834@0] 12, 0010000c, 980000
  192. [ 0.892307@0] 13, 000f000d, 990000
  193. [ 0.895761@0] 14, 000e000e, 1000000
  194. [ 0.899225@0] 15, 000d000f, 1010000
  195. [ 0.902703@0] 16, 000c0010, 1020000
  196. [ 0.906152@0] 17, 000b0011, 1030000
  197. [ 0.909615@0] 18, 000a0012, 1040000
  198. [ 0.913088@0] 19, 00090013, 1050000
  199. [ 0.916543@0] 20, 00080014, 1060000
  200. [ 0.920020@0] 21, 00070015, 1070000
  201. [ 0.923470@0] 22, 00060016, 1080000
  202. [ 0.926933@0] 23, 00050017, 1090000
  203. [ 0.930406@0] 24, 00040018, 1100000
  204. [ 0.933860@0] 25, 00030019, 1110000
  205. [ 0.937329@0] 26, 0002001a, 1120000
  206. [ 0.940797@0] 27, 0001001b, 1130000
  207. [ 0.944251@0] 28, 0000001c, 1140000
  208. [ 0.947774@0] get pin for pwm--------
  209. [ 0.951369@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
  210. [ 0.951958@0] Advanced Linux Sound Architecture Driver Initialized.
  211. [ 0.959914@0] Switching to clocksource Timer-E
  212. [ 0.980103@0] NET: Registered protocol family 2
  213. [ 0.980748@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  214. [ 0.986396@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  215. [ 0.992958@0] TCP: Hash tables configured (established 8192 bind 8192)
  216. [ 0.999366@0] TCP: reno registered
  217. [ 1.002698@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  218. [ 1.008757@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  219. [ 1.015538@0] NET: Registered protocol family 1
  220. [ 1.020119@3] RPC: Registered named UNIX socket transport module.
  221. [ 1.022440@1] hdmitx: system: gate/pwr cmd: 5
  222. [ 1.022443@1] hdmitx: edid: edid ready
  223. [ 1.022446@1] hdmitx: system: gate/pwr cmd: 4
  224. [ 1.038192@3] RPC: Registered udp transport module.
  225. [ 1.043026@3] RPC: Registered tcp transport module.
  226. [ 1.047862@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
  227. [ 1.054566@2] wifi_dev_probe
  228. [ 1.057301@2] wifi_dt : interrupt_pin=GPIOX_21
  229. [ 1.061721@2] wifi_dt : irq_num=null
  230. [ 1.065289@2] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  231. [ 1.070372@2] wifi_dt : power_on_pin=GPIOAO_6
  232. [ 1.074721@2] wifi_dt : power_on_pin2=GPIOX_11
  233. [ 1.079127@2] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
  234. [ 1.088201@2] Unpacking initramfs...
  235. [ 1.107633@2] Freeing initrd memory: 3376K (c4e09000 - c5155000)
  236. [ 1.110557@1] balance_pgdat end zone=0, pgdat_is_balanced=0
  237. [ 1.110691@2] bounce pool size: 64 pages
  238. [ 1.124745@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  239. [ 1.127756@2] NFS: Registering the id_resolver key type
  240. [ 1.130361@2] Key type id_resolver registered
  241. [ 1.134684@2] Key type id_legacy registered
  242. [ 1.140421@2] msgmni has been set to 1197
  243. [ 1.144656@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  244. [ 1.150334@2] io scheduler noop registered (default)
  245. [ 1.155288@2] io scheduler deadline registered
  246. [ 1.160203@2] io scheduler cfq registered
  247. [ 1.173030@2] loop: module loaded
  248. [ 1.173079@2] Loading iSCSI transport class v2.0-870.
  249. [ 1.176882@2] iscsi: registered transport (tcp)
  250. [ 1.182153@2] tun: Universal TUN/TAP device driver, 1.6
  251. [ 1.185452@2] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  252. [ 1.192040@2] PPP generic driver version 2.4.2
  253. [ 1.196635@2] NET: Registered protocol family 24
  254. [ 1.200975@2] usbcore: registered new interface driver smsc95xx
  255. [ 1.207223@2] usbcore: registered new interface driver usb-storage
  256. [ 1.213163@2] mousedev: PS/2 mouse device common for all mice
  257. [ 1.218760@2] i2c /dev entries driver
  258. [ 1.223892@2] hidraw: raw HID events driver (C) Jiri Kosina
  259. [ 1.231691@2] usbcore: registered new interface driver usbhid
  260. [ 1.232454@1] hdmitx: system: gate/pwr cmd: 5
  261. [ 1.232457@1] hdmitx: edid: edid ready
  262. [ 1.232466@1] hdmitx: edid: check sum valid
  263. [ 1.232469@1] hdmitx: edid: check sum valid
  264. [ 1.232473@1] hdmitx: edid: blk0 raw data
  265. [ 1.232516@1] 00ffffffffffff00410c00000101010103140103808048780ae692a3544a9926
  266. [ 1.232554@1] 0f4a4c2108008bc08180a94001010101010101010101023a801871382d40582c
  267. [ 1.232593@1] 450000d05200001e023a80d072382d40102c458000d05200001e000000fc0050
  268. [ 1.232632@1] 68696c697073204654560a20000000fd00303e0f4611000a20202020202001c9
  269. [ 1.232633@1]
  270. [ 1.232636@1] hdmitx: edid: blk1 raw data
  271. [ 1.232675@1] 020331f152101f2022210514041312031102160715060126091f071507508301
  272. [ 1.232713@1] 00006a030c005000382d802e2ee3050301011d803e73382d407e2c458000d052
  273. [ 1.232752@1] 00001e011d80d0721c1620102c258000d05200009e011d00bc52d01e20b82855
  274. [ 1.232791@1] 4000d05200001e011d8018711c1620582c250000d05200009e000000000000e2
  275. [ 1.232792@1]
  276. [ 1.233429@1] hdmitx: edid: find IEEEOUT
  277. [ 1.233517@1] hdmitx: video: get current mode: 720p
  278. [ 1.233528@1] is_similar_hdmi_vic[325] vic_old=4,mode_new=11
  279. [ 1.233533@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
  280. [ 1.233538@1] hdmitx: audio: audio channel num is 0
  281. [ 1.233544@1] hdmitx: audio: SPDIF
  282. [ 1.233557@1] hdmitx: audio: current VIC: 4
  283. [ 1.233559@1] hdmitx: audio: audio sample rate: 0
  284. [ 1.233561@1] hdmitx: audio: reset audio N para
  285. [ 1.233573@1] hdmitx: audio: PCM out to HDMI
  286. [ 1.254433@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  287. [ 1.254437@1] hdmitx: audio: i2s_to_spdif_flag:1
  288. [ 1.254439@1] hdmitx: audio: Enable audio spdif to HDMI
  289. [ 1.254498@1] hdmitx: cec: CEC not ready
  290. [ 1.384813@2] usbhid: USB HID core driver
  291. [ 1.389456@2] ashmem: initialized
  292. [ 1.392372@2] logger: created 256K log 'log_main'
  293. [ 1.397023@2] logger: created 256K log 'log_events'
  294. [ 1.401860@2] logger: created 256K log 'log_radio'
  295. [ 1.406645@2] logger: created 256K log 'log_system'
  296. [ 1.411313@2] vout_init_module
  297. [ 1.414300@2] start init vout module
  298. [ 1.418095@2] create vout attribute ok
  299. [ 1.422171@2] ge2d_init
  300. [ 1.424358@2] ge2d_dev major:247
  301. [ 1.428024@2] ge2d start monitor
  302. [ 1.430987@2] osd_init
  303. [ 1.430997@1] ge2d workqueue monitor start
  304. [ 1.437504@2] osd_probe, vinfo:c05cf090
  305. [ 1.441674@2] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  306. [ 1.449396@2] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
  307. [ 1.454930@2] init fbdev bpp is :32
  308. [ 1.458464@2] ---------------clear framebuffer0 memory
  309. [ 1.529259@0] Console: switching to colour frame buffer device 240x67
  310. [ 1.585345@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
  311. [ 1.588068@0] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
  312. [ 1.593629@0] don't find to display_size_default from mesonfb-dts
  313. [ 1.599669@0] init fbdev bpp is :24
  314. [ 1.618521@0] osd probe ok
  315. [ 1.631653@0] DI: di_init
  316. [ 1.631711@0] DI: di_probe
  317. [ 1.632500@0] aml_wdt_driver_init,301
  318. [ 1.632671@0] ** disable watchdog
  319. [ 1.634278@0] keys===========================================
  320. [ 1.639689@0] keys_devno=f400000
  321. [ 1.643318@0] securitykey: device aml_keys created
  322. [ 1.647662@0] amlkeys=0
  323. [ 1.650204@0] platform_driver_register--aml_keys_driver--------------------
  324. [ 1.657520@0] start uart_ao_ttyS0:(irq = 122)
  325. [ 1.661324@0] register uart_ao ok
  326. [ 1.665061@0] start uart_a_ttyS1:(irq = 58)
  327. [ 1.668779@0] register uart_a ok
  328. [ 1.672501@0] set uart_b pinmux use pinctrl subsystem
  329. [ 1.676997@0] P_AO_RTI_PIN_MUX_REG:5861
  330. [ 1.680826@0] start uart_b_ttyS2:(irq = 107)
  331. [ 1.685083@0] register uart_b ok
  332. [ 1.688684@0] start uart_d_ttyS4:(irq = 126)
  333. [ 1.692526@0] register uart_d ok
  334. [ 1.695996@0] dwc_otg: version 3.10a 12-MAY-2014
  335. [ 1.700328@0] dwc_otg lm-root: dwc_otg_driver_probe(ef3ce200)
  336. [ 1.700340@0] dwc_otg_driver_probe NOT match
  337. [ 1.704624@0] dwc_otg lm1: dwc_otg_driver_probe(ef3ce400)
  338. [ 1.704651@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  339. [ 1.713158@0] USB (1) use clock source: XTAL input
  340. [ 1.718920@0] dwc_otg lm1: base=0xfe080000
  341. [ 1.718932@0] dwc_otg lm1: dwc_otg_device=0xef3eb300
  342. [ 1.739037@0] Core Release: 3.10a
  343. [ 1.739191@0] Setting default values for core params
  344. [ 1.741785@0] curmode: 1, host_only: 1
  345. [ 1.745543@0] dwc_otg lm1: DMA config: BURST_DEFAULT
  346. [ 1.765776@0] Using Buffer DMA mode
  347. [ 1.765935@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  348. [ 1.768264@0] Working on port type = HOST
  349. [ 1.772365@3] dwc_otg lm1: DWC OTG Controller
  350. [ 1.776605@3] dwc_otg lm1: new USB bus registered, assigned bus number 1
  351. [ 1.783301@3] dwc_otg lm1: irq 63, io mem 0x00000000
  352. [ 1.788180@3] -------hcd->flags.d32 = 0
  353. [ 1.792007@3] Init: Port Power? op_state=1
  354. [ 1.799962@3] Init1: Power Port (0)
  355. [ 1.808028@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  356. [ 1.817518@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  357. [ 1.827509@3] usb usb1: Product: DWC OTG Controller
  358. [ 1.835800@3] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  359. [ 1.844400@3] usb usb1: SerialNumber: lm1
  360. [ 1.853521@3] hub 1-0:1.0: USB hub found
  361. [ 1.861846@3] hub 1-0:1.0: 1 port detected
  362. [ 1.870463@3] dwc_otg lm0: dwc_otg_driver_probe(ef3ce600)
  363. [ 1.870493@3] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  364. [ 1.882002@3] USB (0) use clock source: XTAL input
  365. [ 1.891579@3] dwc_otg lm0: base=0xfe040000
  366. [ 1.891593@3] dwc_otg lm0: dwc_otg_device=0xef3d9d00
  367. [ 1.911679@3] Core Release: 3.10a
  368. [ 1.920221@3] Setting default values for core params
  369. [ 1.928902@3] curmode: 1, host_only: 0
  370. [ 1.977626@3] dwc_otg lm0: DMA config: BURST_DEFAULT
  371. [ 1.997817@3] Using Buffer DMA mode
  372. [ 2.006568@3] OTG VER PARAM: 1, OTG VER FLAG: 1
  373. [ 2.015338@3] Working on port type = OTG
  374. [ 2.024113@3] Current port type: SLAVE
  375. [ 2.032966@3] dwc_otg lm0: DWC OTG Controller
  376. [ 2.041800@3] dwc_otg lm0: new USB bus registered, assigned bus number 2
  377. [ 2.051867@3] dwc_otg lm0: irq 62, io mem 0x00000000
  378. [ 2.060953@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  379. [ 2.071438@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  380. [ 2.082414@3] usb usb2: Product: DWC OTG Controller
  381. [ 2.091630@3] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  382. [ 2.101083@3] usb usb2: SerialNumber: lm0
  383. [ 2.110216@1] Indeed it is in host mode hprt0 = 00021501
  384. [ 2.110913@3] hub 2-0:1.0: USB hub found
  385. [ 2.110932@3] hub 2-0:1.0: 1 port detected
  386. [ 2.111174@3] Dedicated Tx FIFOs mode
  387. [ 2.111325@3] using timer detect id change, ef41cc00
  388. [ 2.111606@3] boot_device_flag : 1
  389. [ 2.111617@3] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand
  390. [ 2.111627@3] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc.
  391. [ 2.111634@3] amlnf_phy_init : amlnf init flag 0
  392. [ 2.111731@3] ######STS IRQ mode for nand driver
  393. [ 2.111807@3] NAND device id: 2c 64 44 4b a9 0 0 0
  394. [ 2.111814@3] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA
  395. [ 2.122110@0] HOST mode
  396. [ 2.140305@3] AML_NAND_NEW_OOB : new oob
  397. [ 2.140314@3] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
  398. [ 2.140319@3] boot_device_flag = 1
  399. [ 2.141419@3] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0
  400. [ 2.146509@3] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 0
  401. [ 2.146877@3] nand shipped bbt at block 6
  402. [ 2.152092@0] -------hcd->flags.d32 = 0
  403. [ 2.152117@0] Init: Port Power? op_state=1
  404. [ 2.152120@0] Init1: Power Port (0)
  405. [ 2.163992@3] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
  406. [ 2.164378@3] i=0,register --- nand_key
  407. [ 2.183472@3] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 54
  408. [ 2.186908@3] nand adjust phy offset : block 4
  409. [ 2.186933@3] nand adjust phy offset : block 4
  410. [ 2.186984@3] nfboot : offset: 0x000000000000 -0x000000800000 : partitons 0 : single_chip single_plane
  411. [ 2.186990@3] nfcache : offset: 0x000006800000 -0x000024800000 : partitons 1 : single_chip multi_plane
  412. [ 2.186997@3] nfcode : offset: 0x00002b000000 -0x000050800000 : partitons 5 : single_chip multi_plane
  413. [ 2.187003@3] nfdata : offset: 0x00007b800000 -0x000184800000 : partitons 1 : single_chip multi_plane
  414. [ 2.187100@3] bad block count = 0
  415. [ 2.187100@3]
  416. [ 2.190181@3] bad block count = 0
  417. [ 2.190181@3]
  418. [ 2.197013@3] bad block count = 0
  419. [ 2.197013@3]
  420. [ 2.229912@3] bad block count = 0
  421. [ 2.229912@3]
  422. [ 2.229916@3] amlnand_add_nftl:
  423. [ 2.230294@3] Creating 1 ntd partitions
  424. [ 2.230301@3] block_num 146
  425. [ 2.233407@3] ------init_ntd
  426. [ 2.233994@3] ntd: Giving out device 0 to nfcache
  427. [ 2.233999@3] Creating 5 ntd partitions
  428. [ 2.234004@3] block_num 322
  429. [ 2.241179@3] ntd: Giving out device 1 to nfcode
  430. [ 2.241183@3] Creating 1 ntd partitions
  431. [ 2.241189@3] block_num 1554
  432. [ 2.274385@3] ntd: Giving out device 2 to nfdata
  433. [ 2.275183@3] boot_device_flag : 1
  434. [ 2.275186@3] register_ntd_blktrans start
  435. [ 2.275192@3] ntd device 250!
  436. [ 2.275195@3] ntd->name: nfcache
  437. [ 2.275203@3] adjust_block_num : 4,reserved_block_ratio 10
  438. [ 2.275210@3] nftl version 140911a
  439. [ 2.275234@3] nftl part attr 0
  440. [ 2.278323@3] size_in_blk 146; total_block 145;
  441. [ 2.278326@3] nftl start:145,17
  442. [ 2.278618@3] first
  443. [ 2.326104@3] average_erase_count:1
  444. [ 2.326110@3] second 131,128
  445. [ 2.326113@3] part->max_discard_block = 4
  446. [ 2.405603@3] all block full!!
  447. [ 2.405606@3] all discard block full!!
  448. [ 2.405687@3] free list:
  449. [ 2.405691@3] free block cnt = 74
  450. [ 2.405696@3] new current block is 24
  451. [ 2.405698@3] total discard page count is 0
  452. [ 2.405705@3] create_part_list:1235,current_used_discard_block=23,current_discard_block_used_count=576
  453. [ 2.406787@3] unmappig_pages=24206,discarded_pages=0,mapping_pages=8562
  454. [ 2.406788@3] nftl ok!
  455. [ 2.407558@3] Enable QUEUE_FLAG_DISCARD for NFTL
  456. [ 2.408296@3] aml_nftl_add_ntd ok
  457. [ 2.408303@3] ntd device 250!
  458. [ 2.408306@3] ntd->name: nfcode
  459. [ 2.408312@3] adjust_block_num : 4,reserved_block_ratio 10
  460. [ 2.408319@3] nftl version 140911a
  461. [ 2.408368@3] nftl part attr 0
  462. [ 2.415255@3] nftl start:322,33
  463. [ 2.415804@3] first
  464. [ 2.521131@3] average_erase_count:1
  465. [ 2.521141@3] second 303,289
  466. [ 2.521144@3] part->max_discard_block = 4
  467. [ 2.706875@3] current_block1:104
  468. [ 2.708687@3] all discard block full!!
  469. [ 2.709000@3] free list:
  470. [ 2.709004@3] free block cnt = 216
  471. [ 2.709009@3] new current block is 105
  472. [ 2.715893@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
  473. [ 3.092136@3] usb 1-1: new high-speed USB device number 2 using dwc_otg
  474. [ 3.102058@3] Indeed it is in host mode hprt0 = 00001101
  475. [ 3.132244@0] recover_current_block_mapping : fill the current block, from page 255
  476. [ 3.141381@0] total discard page count is 0
  477. [ 3.148386@0] create_part_list:1235,current_used_discard_block=103,current_discard_block_used_count=623
  478. [ 3.161879@0] unmappig_pages=51809,discarded_pages=0,mapping_pages=22175
  479. [ 3.170406@0] nftl ok!
  480. [ 3.178856@0] Enable QUEUE_FLAG_DISCARD for NFTL
  481. [ 3.187164@0] Enable QUEUE_FLAG_DISCARD for NFTL
  482. [ 3.195376@0] Enable QUEUE_FLAG_DISCARD for NFTL
  483. [ 3.203528@0] Enable QUEUE_FLAG_DISCARD for NFTL
  484. [ 3.211612@0] Enable QUEUE_FLAG_DISCARD for NFTL
  485. [ 3.219573@0] aml_nftl_add_ntd ok
  486. [ 3.226837@0] ntd device 250!
  487. [ 3.234062@0] ntd->name: nfdata
  488. [ 3.241311@2] adjust_block_num : 4,reserved_block_ratio 10
  489. [ 3.248736@2] nftl version 140911a
  490. [ 3.256303@2] nftl part attr 0
  491. [ 3.296438@2] size_in_blk 1554; total_block 1553;
  492. [ 3.302466@3] usb 1-1: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5
  493. [ 3.309486@3] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
  494. [ 3.309495@3] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  495. [ 3.309502@3] usb 1-1: Product: 802.11 n WLAN
  496. [ 3.309509@3] usb 1-1: Manufacturer: Ralink
  497. [ 3.309515@3] usb 1-1: SerialNumber: 1.0
  498. [ 3.360756@2] nftl start:1553,145
  499. [ 3.370918@2] first
  500. [ 3.508595@2] found discard block:399
  501. [ 3.908405@2] found discard block:1552
  502. [ 3.916588@2] average_erase_count:7
  503. [ 3.924483@2] second 1538,1408
  504. [ 3.932233@2] part->max_discard_block = 4
  505. [ 4.875509@2] current_block1:90
  506. [ 5.085259@2] currnet_discard_block1:399
  507. [ 5.237858@2] reach the last discard page:208
  508. [ 5.265874@2] free list:
  509. [ 5.273681@2] free block cnt = 1003
  510. [ 5.281441@2] new current block is 88
  511. [ 5.462920@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
  512. [ 5.867588@0] recover_current_block_mapping : fill the current block, from page 255
  513. [ 5.877803@0] total discard page count is 463
  514. [ 5.886049@0] create_part_list:1235,current_used_discard_block=399,current_discard_block_used_count=3
  515. [ 5.911676@0] unmappig_pages=244692,discarded_pages=45144,mapping_pages=70612
  516. [ 5.921897@0] nftl ok!
  517. [ 5.931591@3] Enable QUEUE_FLAG_DISCARD for NFTL
  518. [ 5.941201@3] aml_nftl_add_ntd ok
  519. [ 5.949818@3] init_aml_nftl end
  520. [ 5.958201@3] amvideocap_init_module
  521. [ 5.966586@3] amvideocap_probe,amvideocap
  522. [ 5.974885@3] amvideocap_dev_register buf:0da00000,size:600000.
  523. [ 5.984171@3] Amlogic A/V streaming port init
  524. [ 5.995469@3] buffersize=262144,0,start=0
  525. [ 6.003963@3] Subtitle stbuf alloced at 0xee380000, size = 262144
  526. [ 6.012941@3] changed the (2) buffer size from 0 to 262144
  527. [ 6.021931@3] init vdec memsource 9a00000->d9fffff
  528. [ 6.030952@3] [tsync_pcr_init]init success.
  529. [ 6.039806@3] regist mpeg12 codec profile
  530. [ 6.048704@3] regist mpeg4 codec profile
  531. [ 6.057377@3] amvdec_vc1 module init
  532. [ 6.066231@3] regist vc1 codec profile
  533. [ 6.074911@3] amvdec_h264 module init
  534. [ 6.083778@3] regist h264 codec profile
  535. [ 6.092438@3] amvdec_h264mvc module init
  536. [ 6.101244@3] regist hmvc codec profile
  537. [ 6.109945@3] amvdec_h265 module init
  538. [ 6.118818@3] regist hevc codec profile
  539. [ 6.127552@3] regist mjpeg codec profile
  540. [ 6.135957@3] amvdec_real module init
  541. [ 6.144436@3] regist real codec profile
  542. [ 6.152619@3] amvdec_avs module init
  543. [ 6.161282@3] alloc_keep_buffer keep_y_addr ede00000
  544. [ 6.169299@3] alloc_keep_buffer keep_u_addr ee400000
  545. [ 6.177053@3] alloc_keep_buffer keep_v_addr ee500000
  546. [ 6.184654@3] yaddr=ede00000,u_addr=ee400000,v_addr=ee500000
  547. [ 6.192909@3] create_ge2d_work_queue video task ok
  548. [ 6.201305@3]
  549. [ 6.201305@3]
  550. [ 6.201305@3] VECM init
  551. [ 6.201305@3]
  552. [ 6.234436@3] efuse===========================================
  553. [ 6.242887@3] efuse: device efuse created
  554. [ 6.250927@3] efuse--------------------------------------------
  555. [ 6.259131@3] SARADC Driver init.
  556. [ 6.267277@3] __saradc_probe__
  557. [ 6.422199@3] saradc calibration: ref_val = 508
  558. [ 6.430113@3] saradc calibration: ref_nominal = 512
  559. [ 6.437764@3] saradc calibration: coef = 4080
  560. [ 6.445698@3] ir irblaster probe
  561. [ 6.453564@3] Remote Driver
  562. [ 6.460894@3] Remote platform_data g_remote_base=fe600580
  563. [ 6.468297@3] set drvdata completed
  564. [ 6.475674@3] device_create_file completed
  565. [ 6.483735@3] input: aml_keypad as /devices/platform/meson-remote/input/input0
  566. [ 6.493422@3] input_register_device completed
  567. [ 6.501091@3] [0xffffff00] = 0x1dd0190
  568. [ 6.508767@3] [0xffffff04] = 0xf800ca
  569. [ 6.516384@3] [0xffffff08] = 0x82006e
  570. [ 6.523955@3] [0xffffff0c] = 0x3c0030
  571. [ 6.531457@3] [0xffffff10] = 0x30fa0013
  572. [ 6.538929@3] [0xffffff18] = 0x6f19000
  573. [ 6.546359@3] [0xffffff1c] = 0xbe40
  574. [ 6.553716@3] [0x0] = 0xfa00a0
  575. [ 6.561008@3] [0x4] = 0xfa00a0
  576. [ 6.568272@3] [0x8] = 0xfa00a0
  577. [ 6.575482@3] [0xc] = 0x640030
  578. [ 6.582494@3] [0x10] = 0x30fa0013
  579. [ 6.589340@3] [0x18] = 0x961b800
  580. [ 6.596040@3] [0x1c] = 0x9740
  581. [ 6.602516@3] [0x20] = 0x104
  582. [ 6.608758@3] [0x24] = 0x0
  583. [ 6.614845@3] [0x28] = 0x0
  584. [ 6.620834@3] set_remote_mode[69]
  585. [ 6.626852@3] remote config major:236
  586. [ 6.633274@3] physical address:0x2f7d6000
  587. [ 6.639484@3] Meson KeyInput init
  588. [ 6.645811@3] GPIO Keypad Driver init.
  589. [ 6.651933@3] ==gpio_key_probe==
  590. [ 6.657934@3] reg:2620,clearmask=400040,setmask=1
  591. [ 6.663931@3] reg:2622,clearmask=ff0000,set pin=3
  592. [ 6.669860@3] reg:2623,clearmask=7000000,setmask=7
  593. [ 6.675717@3] reg:2620,clearmask=800080,setmask=10001
  594. [ 6.681538@3] reg:2622,clearmask=ff000000,set pin=3
  595. [ 6.687346@3] reg:2623,clearmask=70000000,setmask=7
  596. [ 6.693157@3] power key(116) registed.
  597. [ 6.693163@0] key 116 up
  598. [ 6.705017@3] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
  599. [ 6.713078@3] gpio keypad register input device completed.
  600. [ 6.719178@3] gpio keypad major:235
  601. [ 6.725724@3] spi_nor_init
  602. [ 6.731981@3] amlogic_spi_nor_probe:
  603. [ 6.738043@3] amlogic_spi->state_name:default
  604. [ 6.744375@3] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  605. [ 6.752789@3] check_storage_device : spi boot_device_flag : -1
  606. [ 6.759290@3] spi_nor_probe
  607. [ 6.765580@3] spi_nor_probe 629 boot_device_flag 1 : do not init spi
  608. [ 6.772732@3] spi_nor: probe of apollospi:32766 failed with error -12
  609. [ 6.780004@3] amlogic_spi_nor_probe over
  610. [ 6.786730@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  611. [ 6.797865@3] host->base fe108c20
  612. [ 6.804832@3] pdata->caps 7
  613. [ 6.811626@3] pdata->caps2 0
  614. [ 6.818323@3] get property: port, value:0x00000001
  615. [ 6.825998@3] get property: ocr_avail, value:0x00200000
  616. [ 6.833725@3] get property: f_min, value:0x000493e0
  617. [ 6.841462@3] get property: f_max, value:0x02faf080
  618. [ 6.849224@3] get property: f_max_w, value:0x02faf080
  619. [ 6.856877@3] get property: max_req_size, value:0x00020000
  620. [ 6.864463@3] get property: irq_in, value:0x00000003
  621. [ 6.871960@3] get property: irq_out, value:0x00000005
  622. [ 6.879369@3] get property: gpio_cd, str:CARD_6
  623. [ 6.886254@3] get property: pinname, str:sd
  624. [ 6.892746@3] get property: jtag_pin, str:CARD_0
  625. [ 6.899565@3] get property: card_type, value:0x00000005
  626. [ 6.906957@3] get property: gpio_dat3, str:CARD_4
  627. [ 6.952124@3] reg:2620,clearmask=80008,setmask=10001
  628. [ 6.958700@3] reg:2621,clearmask=ff000000,set pin=49
  629. [ 6.965253@3] reg:2623,clearmask=7000,setmask=7
  630. [ 6.971761@3] reg:2620,clearmask=200020,setmask=1
  631. [ 6.978279@3] reg:2622,clearmask=ff00,set pin=49
  632. [ 6.984701@3] reg:2623,clearmask=700000,setmask=7
  633. [ 6.991252@3] pdata->caps 10f
  634. [ 6.997559@3] pdata->caps2 0
  635. [ 7.003831@3] get property: port, value:0x00000000
  636. [ 7.011144@3] get property: ocr_avail, value:0x00200000
  637. [ 7.018484@3] get property: f_min, value:0x000493e0
  638. [ 7.025835@3] get property: f_max, value:0x02faf080
  639. [ 7.033196@3] get property: max_req_size, value:0x00020000
  640. [ 7.040569@3] get property: pinname, str:sdio
  641. [ 7.047268@3] get property: card_type, value:0x00000003
  642. [ 7.212084@3] [aml_sdio_probe] aml_sdio_probe() success!
  643. [ 7.220171@3] host->base fe108e00
  644. [ 7.227077@3] pdata->caps 80000547
  645. [ 7.233863@3] pdata->caps2 0
  646. [ 7.240605@3] get property: port, value:0x00000005
  647. [ 7.248418@3] get property: ocr_avail, value:0x00200000
  648. [ 7.256245@3] get property: f_min, value:0x000493e0
  649. [ 7.264101@3] get property: f_max, value:0x02faf080
  650. [ 7.271962@3] get property: max_req_size, value:0x00020000
  651. [ 7.279840@3] get property: pinname, str:emmc
  652. [ 7.287016@3] get property: card_type, value:0x00000001
  653. [ 7.294903@3] get property: gpio_dat3, str:BOOT_3
  654. [ 7.302250@3] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
  655. [ 7.310021@3] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
  656. [ 7.382090@3] [aml_sdhc_probe] aml_sdhc_probe() success!
  657. [ 7.389544@3] [dsp]DSP start addr 0xc5e00000
  658. [ 7.396790@3] [dsp]register dsp to char divece(257)
  659. [ 7.404935@3] amlogic audio spdif interface device init!
  660. [ 7.412381@3] name=nand_key nand_key
  661. [ 7.420055@3] register_aes_algorithm:488,new way
  662. [ 7.427472@3] unkown current key-name,key_read_show:1396
  663. [ 7.434892@3] get keyexample fail, aml_rtc_probe:750
  664. [ 7.442538@3] rtc clock error
  665. [ 7.450154@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  666. [ 7.457997@3] rtc clock error
  667. [ 7.465346@3] rtc clock error
  668. [ 7.472635@3] rtc clock error
  669. [ 7.482421@3] amaudio2: device amaudio2 created
  670. [ 7.490068@3] Error: Didn't get power valid value --- wifi_power_probe 323
  671. [ 7.498630@3] wifi_power power_gpio is 6
  672. [ 7.505845@3] wifi_power power_gpio2 is 108
  673. [ 7.513585@3] bcmdhd_wlan_init()
  674. [ 7.520655@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef43a300, size=3760
  675. [ 7.529272@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef43a3c0, size=3760
  676. [ 7.537751@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef43a480, size=3760
  677. [ 7.546004@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef43a540, size=3760
  678. [ 7.554037@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef43a600, size=3760
  679. [ 7.562018@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef43a6c0, size=3760
  680. [ 7.570001@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef43a780, size=3760
  681. [ 7.577903@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef43a840, size=3760
  682. [ 7.585777@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef43a900, size=7856
  683. [ 7.593637@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef43a9c0, size=7856
  684. [ 7.601464@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef43aa80, size=7856
  685. [ 7.609449@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef43ab40, size=7856
  686. [ 7.617387@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef43ac00, size=7856
  687. [ 7.625293@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef43acc0, size=7856
  688. [ 7.633190@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef43ad80, size=7856
  689. [ 7.641019@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef43ae40, size=7856
  690. [ 7.648832@3] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef43af00, size=16048
  691. [ 7.656722@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef43a300, size=20504
  692. [ 7.664463@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef43a3c0, size=20504
  693. [ 7.672140@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef43a480, size=81944
  694. [ 7.679693@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef43a540, size=163864
  695. [ 7.687272@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef43a600, size=20504
  696. [ 7.694741@3] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=edb70000, size=65536
  697. [ 7.702576@3] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=edbc0000, size=65536
  698. [ 7.710316@3] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  699. [ 7.716401@3] amlogic rfkill init
  700. [ 7.722511@3] enter bt_probe of_node
  701. [ 7.722529@3] not get gpio_en
  702. [ 7.728580@3] not get gpio_wake
  703. [ 7.762384@3] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  704. [ 7.768533@3] clock_32k_pin(107) : (null)
  705. [ 7.774722@3] clock_32k_pin(107) : sdio_wifi
  706. [ 7.882739@3] UMP: UMP device driver 0000 loaded
  707. [ 7.889003@3] aml_hw_crypto initialization.
  708. [ 7.896753@3] enter rt5616_modinit
  709. [ 7.903380@3] dummy_codec_platform_probe
  710. [ 7.909929@3] == ES8323 == es8323_modinit()
  711. [ 7.916810@3] enter aml_i2s_dai_probe
  712. [ 7.916826@3] i2s get no clk src setting in dts, use the default mpll 0
  713. [ 7.924108@3] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  714. [ 7.933182@3] enter aml_pcm_dai_probe
  715. [ 7.933353@3] [aml-spdif-dai]enter aml_dai_spdif_init
  716. [ 7.939874@3] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  717. [ 7.947998@3] audio_set_958_clk, freq=4,
  718. [ 7.954691@3] IEC958 16bit
  719. [ 7.961361@3] hdmitx: audio: aout notify rate 48000
  720. [ 7.968167@3] hdmitx: audio: aout notify size 16
  721. [ 7.974913@3] hdmitx: audio: aout notify format CT_PCM
  722. [ 7.981638@3] hdmitx: audio: audio channel num is 1
  723. [ 7.988359@3] hdmitx: audio: SPDIF
  724. [ 7.994939@3] hdmitx: audio: current VIC: 4
  725. [ 8.001386@3] hdmitx: audio: audio sample rate: 3
  726. [ 8.007800@3] hdmitx: audio: reset audio N para
  727. [ 8.014160@3] hdmitx: audio: PCM out to HDMI
  728. [ 8.020452@3] hdmitx: audio: i2s_to_spdif_flag:1
  729. [ 8.026716@3] hdmitx: audio: Enable audio spdif to HDMI
  730. [ 8.032958@3] hdmitx: audio: Audio Type: PCM
  731. [ 8.039166@3] hdmitx: audio: set audio param
  732. [ 8.045397@3] [aml-spdif-dai]aml_spdif_probe
  733. [ 8.051769@3] test codec rt5616
  734. [ 8.057809@3] test_codec_of_node, node rt5616 disable
  735. [ 8.063840@3] test codec rt5631
  736. [ 8.069726@3] test_codec_of_node, node rt5631 disable
  737. [ 8.075769@3] test codec wm8960
  738. [ 8.081810@3] test_codec_of_node, node wm8960 disable
  739. [ 8.087930@3] test codec dummy_codec
  740. [ 8.093917@3] using external codec, index = 4
  741. [ 8.099841@3] using external dummy codec
  742. [ 8.106058@3] enter spdif_dit_probe
  743. [ 8.111982@3] aml_spdif_unmute
  744. [ 8.118119@3] codec_name = dummy_codec.0
  745. [ 8.124338@1] enter aml_set_bias_level level: 1
  746. [ 8.124358@1] enter aml_set_bias_level level: 1
  747. [ 8.124371@1] enter aml_set_bias_level level: 1
  748. [ 8.124380@1] enter aml_set_bias_level level: 2
  749. [ 8.124447@3] enter aml_asoc_init
  750. [ 8.124489@3] p_aml_audio->hp_disable=1
  751. [ 8.130442@3] falied to get spk event delay time paraments from dts file
  752. [ 8.137667@3] spk_event delay_time = 0
  753. [ 8.144756@3] aml-i2s 0:playback preallocate_dma_buffer: area=f08e7000, addr=2de00000, size=524288
  754. [ 8.154935@3] aml-i2s 1:capture preallocate_dma_buffer: area=f0592000, addr=2df00000, size=65536
  755. [ 8.164864@3] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
  756. [ 8.174252@1] enter aml_set_bias_level level: 1
  757. [ 8.174265@1] enter aml_set_bias_level level: 2
  758. [ 8.175199@3] aml-i2s 0:playback preallocate_dma_buffer: area=f0969000, addr=2d800000, size=524288
  759. [ 8.185957@3] aml-i2s 1:capture preallocate_dma_buffer: area=f05b3000, addr=2dea0000, size=65536
  760. [ 8.196461@3] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
  761. [ 8.206265@1] enter aml_set_bias_level level: 1
  762. [ 8.206277@1] enter aml_set_bias_level level: 2
  763. [ 8.206372@1] enter aml_set_bias_level level: 1
  764. [ 8.206383@1] enter aml_set_bias_level level: 2
  765. [ 8.207954@1] enter aml_set_bias_level level: 1
  766. [ 8.207967@1] enter aml_set_bias_level level: 2
  767. [ 8.208094@3] -----ext_codec=1---
  768. [ 8.215655@3] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  769. [ 8.224086@3] TCP: cubic registered
  770. [ 8.232974@3] NET: Registered protocol family 10
  771. [ 8.241575@3] NET: Registered protocol family 17
  772. [ 8.249594@3] Key type dns_resolver registered
  773. [ 8.258506@3] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  774. [ 8.267384@3] Registering SWP/SWPB emulation handler
  775. [ 8.275599@3] enter meson_pm_init
  776. [ 8.284013@3] enter meson_pm_probe!
  777. [ 8.292268@3] ---meson_pm_probe----set output pin success
  778. [ 8.300651@3] hdmi: cec_pm: cec config:0xf
  779. [ 8.308992@3] meson_pm_probe done !
  780. [ 8.317410@3] AO cpu runs ok.
  781. [ 8.327799@3] console [netcon0] enabled
  782. [ 8.336086@3] netconsole: network logging started
  783. [ 8.344471@3] rtc clock error
  784. [ 8.352847@3] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  785. [ 8.363268@3] meson_cpufreq_probe:SYSPLL request to be fixed
  786. [ 8.371811@3] meson_cpufreq: no voltage_control prop
  787. [ 8.380397@3] voltage_control = 0
  788. [ 8.389893@3] hdmitx: cec: CEC init
  789. [ 8.394361@1] hdmitx: cec: CEC task process
  790. [ 8.398830@3] input: cec_input as /devices/virtual/input/input2
  791. [ 8.403733@3] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  792. [ 8.409030@3] ALSA device list:
  793. [ 8.417803@3] #0: AML-M8AUDIO
  794. [ 8.422495@3] Freeing unused kernel memory: 212K (c07a5000 - c07da000)
  795. [ 8.454765@2] tvmode set to 720p
  796. [ 8.454765@2]
  797. [ 8.454786@2] don't set the same mode as current.
  798. [ 8.539331@2] vfm_map_store:rm default
  799. [ 8.539331@2]
  800. [ 8.539422@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  801. [ 8.539422@2]
  802. [ 8.559328@2] aml_nftl_open ok!
  803. [ 8.559567@2] blktrans_ioctl -cmd: 5331,801c0204,64
  804. [ 8.579479@2] aml_nftl_open ok!
  805. [ 8.579731@2] blktrans_ioctl -cmd: 5331,801c0204,64
  806. [ 8.582846@0] aml_nftl_open ok!
  807. [ 8.582928@0] aml_nftl_open ok!
  808. [ 8.608505@0] aml_nftl_open ok!
  809. [ 8.608576@0] aml_nftl_open ok!
  810. [ 8.789494@0] aml_nftl_open ok!
  811. [ 8.806687@0] aml_nftl_open ok!
  812. [ 8.884489@2] aml_nftl_open ok!
  813. [ 8.886188@2] force enable DISCARD here for ext4 fs
  814. [ 8.886258@2] EXT4-fs (system): couldn't mount as ext3 due to feature incompatibilities
  815. [ 8.886792@2] aml_nftl_open ok!
  816. [ 8.887392@2] force enable DISCARD here for ext4 fs
  817. [ 8.887456@2] EXT4-fs (system): couldn't mount as ext2 due to feature incompatibilities
  818. [ 8.887923@2] aml_nftl_open ok!
  819. [ 8.888498@2] force enable DISCARD here for ext4 fs
  820. [ 8.900683@2] checked enable EXT4 DISCARD here
  821. [ 8.900752@2] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
  822. [ 9.180520@2] aml_nftl_open ok!
  823. [ 9.181285@2] force enable DISCARD here for ext4 fs
  824. [ 9.181298@2] EXT4-fs (data): couldn't mount as ext3 due to feature incompatibilities
  825. [ 9.181400@2] aml_nftl_open ok!
  826. [ 9.181487@2] force enable DISCARD here for ext4 fs
  827. [ 9.181496@2] EXT4-fs (data): couldn't mount as ext2 due to feature incompatibilities
  828. [ 9.181563@2] aml_nftl_open ok!
  829. [ 9.181640@2] force enable DISCARD here for ext4 fs
  830. [ 9.184183@2] checked enable EXT4 DISCARD here
  831. [ 9.184195@2] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
  832. [ 9.450489@2] systemd[1]: systemd 217 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
  833. [ 9.451616@2] systemd[1]: Detected architecture 'arm'.
  834. [ 9.452661@2] systemd[1]: Running with unpopulated /etc.
  835. [ 9.454987@2] systemd[1]: Set hostname to <OpenELEC>.
  836. [ 9.456094@2] systemd[1]: Initializing machine ID from random generator.
  837. [ 9.459093@2] systemd[1]: Populated /etc with preset unit settings.
  838. [ 9.505017@1] config uart_ao_ttyS0:: Character length 8bits/char
  839. [ 9.522241@1] Changing uart_ao_ttyS0: baud from 0 to 115200
  840. [ 9.865485@1] systemd[1]: Starting Paths.
  841. [ 9.865731@1] systemd[1]: Reached target Paths.
  842. [ 9.865809@1] systemd[1]: Starting Swap.
  843. [ 9.865863@1] systemd[1]: Reached target Swap.
  844. [ 9.865914@1] systemd[1]: Starting Root Slice.
  845. [ 9.866026@1] systemd[1]: Created slice Root Slice.
  846. [ 9.866078@1] systemd[1]: Starting User and Session Slice.
  847. [ 9.866226@1] systemd[1]: Created slice User and Session Slice.
  848. [ 9.866277@1] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  849. [ 9.866435@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  850. [ 9.866487@1] systemd[1]: Starting Delayed Shutdown Socket.
  851. [ 9.866597@1] systemd[1]: Listening on Delayed Shutdown Socket.
  852. [ 9.866647@1] systemd[1]: Starting Journal Socket (/dev/log).
  853. [ 9.866770@1] systemd[1]: Listening on Journal Socket (/dev/log).
  854. [ 9.866838@1] systemd[1]: Starting udev Control Socket.
  855. [ 9.866939@1] systemd[1]: Listening on udev Control Socket.
  856. [ 9.867000@1] systemd[1]: Starting udev Kernel Socket.
  857. [ 9.867103@1] systemd[1]: Listening on udev Kernel Socket.
  858. [ 9.867169@1] systemd[1]: Starting Journal Socket.
  859. [ 9.867311@1] systemd[1]: Listening on Journal Socket.
  860. [ 9.867404@1] systemd[1]: Starting System Slice.
  861. [ 9.867553@1] systemd[1]: Created slice System Slice.
  862. [ 9.867720@1] systemd[1]: Starting Remount Root and Kernel File Systems...
  863. [ 9.868913@1] systemd[1]: Mounting Temporary Directory...
  864. [ 9.870364@1] systemd[1]: Started Debug Shell.
  865. [ 9.870504@1] systemd[1]: Mounted Huge Pages File System.
  866. [ 9.870615@1] systemd[1]: Mounting POSIX Message Queue File System...
  867. [ 9.877010@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  868. [ 9.878396@1] systemd[1]: Starting Setup machine-id...
  869. [ 9.879973@1] systemd[1]: Mounting Debug File System...
  870. [ 9.881281@1] systemd[1]: Starting Set ondemand threshold...
  871. [ 9.882831@1] systemd[1]: Starting Show Version...
  872. [ 9.952104@1] systemd[1]: Starting Load Kernel Modules...
  873. [ 9.954135@1] systemd[1]: Starting udev Coldplug all Devices...
  874. [ 9.956174@1] systemd[1]: Starting Slices.
  875. [ 9.956332@1] systemd[1]: Reached target Slices.
  876. [ 9.956564@1] systemd[1]: Mounting Variable Directory...
  877. [ 9.958261@1] systemd[1]: Starting Kodi config dir rebrand...
  878. [ 9.963027@1] systemd[1]: Started Remount Root and Kernel File Systems.
  879. [ 9.970478@0] systemd[1]: Started Create list of required static device nodes for the current kernel.
  880. [ 9.987558@0] systemd[1]: Mounted Debug File System.
  881. [ 9.988065@0] systemd[1]: Mounted POSIX Message Queue File System.
  882. [ 9.988625@0] systemd[1]: Mounted Temporary Directory.
  883. [ 9.992487@0] systemd[1]: Started Set ondemand threshold.
  884. [ 9.995184@0] systemd[1]: Started Show Version.
  885. [ 10.044436@0] systemd[1]: Mounted Variable Directory.
  886. [ 10.048852@0] systemd[1]: Started Setup machine-id.
  887. [ 10.051292@0] systemd[1]: Started Kodi config dir rebrand.
  888. [ 10.071697@3] gpu cooling register okay with err=0
  889. [ 10.071870@3] Mali: Mali device driver loaded
  890. [ 10.077531@3] Triggered SDIO WiFi power on and bus rescan.
  891. [ 10.077543@3] wifi_setup_dt
  892. [ 10.077548@3] wifi_request_32k_clk : ON-->ON for sdio_wifi
  893. [ 10.077553@3] interrupt_pin(118) : (null)
  894. [ 10.077572@3] reg:2620,clearmask=100010,setmask=0
  895. [ 10.077578@3] reg:2622,clearmask=ff,set pin=118
  896. [ 10.077583@3] reg:2623,clearmask=70000,setmask=4
  897. [ 10.077587@3] interrupt_pin(118) : sdio_wifi
  898. [ 10.077592@3] power_on_pin(6) : (null)
  899. [ 10.077602@3] power_on_pin(6) : sdio_wifi
  900. [ 10.077607@3] power_on_pin2(108) : (null)
  901. [ 10.077616@3] power_on_pin2(108) : sdio_wifi
  902. [ 10.157327@0] systemd[1]: Started udev Coldplug all Devices.
  903. [ 10.162519@0] systemd[1]: Starting Journal Service...
  904. [ 10.163724@0] systemd[1]: Starting Setup Timezone data...
  905. [ 10.166341@0] systemd[1]: Started Debug /var/log relink.
  906. [ 10.167080@0] systemd[1]: Starting Create Static Device Nodes in /dev...
  907. [ 10.199077@0] systemd[1]: Started Create Static Device Nodes in /dev.
  908. [ 10.199857@0] systemd[1]: Started Setup Timezone data.
  909. [ 10.210030@0] systemd[1]: Starting Local File Systems (Pre).
  910. [ 10.210122@0] systemd[1]: Reached target Local File Systems (Pre).
  911. [ 10.210257@0] systemd[1]: Starting Local File Systems.
  912. [ 10.210325@0] systemd[1]: Reached target Local File Systems.
  913. [ 10.210467@0] systemd[1]: Started Rebuild Journal Catalog.
  914. [ 10.331159@0] systemd[1]: Started Journal Service.
  915. [ 10.356236@2] systemd-journald[1739]: Received request to flush runtime journal from PID 1
  916. [ 10.382137@3] WIFI Disable! 6
  917. [ 10.692119@3] WIFI Enable! 6
  918. [ 11.042204@3] Indeed it is in host mode hprt0 = 00041901
  919. [ 11.159134@2] cfg80211: Calling CRDA to update world regulatory domain
  920. [ 11.159289@2] cfg80211: World regulatory domain updated:
  921. [ 11.159297@2] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  922. [ 11.159305@2] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  923. [ 11.159311@2] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  924. [ 11.159316@2] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
  925. [ 11.159322@2] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  926. [ 11.159328@2] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  927. [ 11.159334@2] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
  928. [ 11.159340@2] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  929. [ 11.159346@2] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  930. [ 11.182569@2] rtc clock error
  931. [ 11.218137@1] aml_nftl_open ok!
  932. [ 11.218195@0] aml_nftl_open ok!
  933. [ 11.219227@1] blktrans_ioctl -cmd: 5331,801c0204,64
  934. [ 11.219331@0] blktrans_ioctl -cmd: 5331,801c0204,64
  935. [ 11.220788@0] aml_nftl_open ok!
  936. [ 11.221797@0] blktrans_ioctl -cmd: 5331,801c0204,64
  937. [ 11.222343@3] usb 2-1: new low-speed USB device number 2 using dwc_otg
  938. [ 11.223748@1] blktrans_ioctl -cmd: 5331,801c0204,64
  939. [ 11.224737@3] Indeed it is in host mode hprt0 = 00041901
  940. [ 11.235439@2] aml_nftl_open ok!
  941. [ 11.235629@1] aml_nftl_open ok!
  942. [ 11.243640@2] blktrans_ioctl -cmd: 5331,801c0204,64
  943. [ 11.245733@0] blktrans_ioctl -cmd: 5331,801c0204,64
  944. [ 11.247935@1] blktrans_ioctl -cmd: 5331,801c0204,64
  945. [ 11.423902@2] Indeed it is in host mode hprt0 = 00001101
  946. [ 11.434298@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
  947. [ 11.434309@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  948. [ 11.434317@3] usb 2-1: Product: Wireless USB Device
  949. [ 11.434323@3] usb 2-1: Manufacturer: HOLTEK
  950. [ 11.441245@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input3
  951. [ 11.441669@3] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
  952. [ 11.455983@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input4
  953. [ 11.456959@3] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
  954. [ 11.602141@2] usb 1-1: reset high-speed USB device number 2 using dwc_otg
  955. [ 11.604134@2] Indeed it is in host mode hprt0 = 00001101
  956. [ 11.812632@2] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  957. [ 11.819178@3] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  958. [ 11.819770@3] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  959. [ 11.821185@3] usbcore: registered new interface driver rt2800usb
  960. [ 11.692117@1] [aml_sdio_timeout] time_start_cnt:999
  961. [ 11.692117@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  962. [ 11.692117@1] [aml_sdio_timeout] time_start_cnt:1000
  963. [ 11.692117@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  964. [ 11.692117@1] 
  965. [ 13.692449@1] [aml_sdio_timeout] time_start_cnt:995
  966. [ 13.692449@1] <6>[ 13.732000@1] sdio: new high speed SDIO card at address 0001, clock 39843750, 4-bit-bus-width
  967. [ 13.753972@3] [sdio_reinit] finish
  968. [ 13.692718@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  969. [ 13.692718@0] 
  970. [ 13.879414@0] Console: switching to colour dummy device 80x30
  971. [ 13.903313@0] RTL871X: module init start
  972. [ 13.903331@0] RTL871X: rtl8723bs v4.3.5_11545.20140603_BTCOEX20140507-4E40
  973. [ 13.903341@0] RTL871X: build time: Jun 10 2015 00:16:37
  974. [ 13.903347@0] RTL871X: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
  975. [ 13.903351@0] wifi_setup_dt
  976. [ 13.903357@0] wifi_request_32k_clk : ON-->ON for sdio_wifi
  977. [ 13.903362@0] interrupt_pin(118) : sdio_wifi
  978. [ 13.903369@0] sdio_wifi is using the pin GPIOX_21
  979. [ 13.903381@0] wifi_dt : gpio op failed(-16) at line 210
  980. [ 13.903401@0] reg:2620,clearmask=100010,setmask=0
  981. [ 13.903413@0] reg:2622,clearmask=ff,set pin=118
  982. [ 13.903422@0] reg:2623,clearmask=70000,setmask=4
  983. [ 13.903427@0] interrupt_pin(118) : sdio_wifi
  984. [ 13.903432@0] power_on_pin(6) : sdio_wifi
  985. [ 13.903437@0] sdio_wifi is using the pin GPIOAO_6
  986. [ 13.903441@0] wifi_dt : gpio op failed(-16) at line 232
  987. [ 13.903449@0] power_on_pin(6) : sdio_wifi
  988. [ 13.903454@0] power_on_pin2(108) : sdio_wifi
  989. [ 13.903458@0] sdio_wifi is using the pin GPIOX_11
  990. [ 13.903463@0] wifi_dt : gpio op failed(-16) at line 244
  991. [ 13.903468@0] power_on_pin2(108) : sdio_wifi
  992. [ 13.903473@0] ######platform_wifi_power_on:
  993. [ 13.903479@0] WIFI Disable! 6
  994. [ 13.903649@3] Disconnect cb-Host
  995. [ 14.029489@1] cur_mode = 0
  996. [ 14.029511@1] [0x0] = 0x1dd0190
  997. [ 14.029520@1] [0x4] = 0xf800ca
  998. [ 14.029529@1] [0x8] = 0x82006e
  999. [ 14.029535@1] [0xc] = 0x3c0030
  1000. [ 14.029539@1] [0x10] = 0x30fa0013
  1001. [ 14.029544@1] [0x18] = 0x6f19000
  1002. [ 14.029547@1] [0x1c] = 0x9f40
  1003. [ 14.029553@1] [0x20] = 0x0
  1004. [ 14.029562@1] [0x24] = 0x0
  1005. [ 14.029571@1] [0x28] = 0x0
  1006. [ 14.029581@1] set_remote_mode[69]
  1007. [ 14.132195@3] usb 2-1: USB disconnect, device number 2
  1008. [ 14.212108@0] WIFI Enable! 6
  1009. [ 14.522128@0] sdio_reset_comm():
  1010. [ 14.574202@1] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  1011. [ 14.581373@1] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  1012. [ 14.582137@1] Indeed it is in host mode hprt0 = 00041901
  1013. [ 14.762128@1] usb 2-1: new low-speed USB device number 3 using dwc_otg
  1014. [ 14.763996@3] Indeed it is in host mode hprt0 = 00041901
  1015. [ 14.816560@0] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1016. [ 14.974321@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
  1017. [ 14.974341@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1018. [ 14.974352@3] usb 2-1: Product: Wireless USB Device
  1019. [ 14.974363@3] usb 2-1: Manufacturer: HOLTEK
  1020. [ 14.984883@0] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input5
  1021. [ 14.986006@0] hid-generic 0003:04D9:A01C.0003: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
  1022. [ 15.001511@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input6
  1023. [ 15.003065@3] hid-generic 0003:04D9:A01C.0004: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
  1024. [ 15.234543@1] wlan0: authenticate with 58:98:35:bc:bb:1e
  1025. [ 15.256901@3] wlan0: send auth to 58:98:35:bc:bb:1e (try 1/3)
  1026. [ 15.258683@0] wlan0: authenticated
  1027. [ 15.262147@3] wlan0: associate with 58:98:35:bc:bb:1e (try 1/3)
  1028. [ 15.265444@0] wlan0: RX AssocResp from 58:98:35:bc:bb:1e (capab=0x411 status=0 aid=4)
  1029. [ 15.269945@3] wlan0: associated
  1030. [ 15.270030@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1031. [ 15.805960@2] Digital output mode: 0 - PCM
  1032. [ 15.884217@2] aml_i2s_close device type 8
  1033. [ 15.909238@2] IEC958 16bit
  1034. [ 15.909255@2] hdmitx: audio: aout notify rate 48000
  1035. [ 15.909259@2] hdmitx: audio: aout notify size 16
  1036. [ 15.909268@2] hdmitx: audio: audio channel num is 1
  1037. [ 15.909276@2] hdmitx: audio: SPDIF
  1038. [ 15.909287@2] hdmitx: audio: current VIC: 4
  1039. [ 15.909291@2] hdmitx: audio: audio sample rate: 3
  1040. [ 15.909295@2] hdmitx: audio: reset audio N para
  1041. [ 15.909306@2] hdmitx: audio: PCM out to HDMI
  1042. [ 15.909310@2] hdmitx: audio: i2s_to_spdif_flag:1
  1043. [ 15.909314@2] hdmitx: audio: Enable audio spdif to HDMI
  1044. [ 15.909321@2] hdmitx: audio: Audio Type: PCM
  1045. [ 15.909363@2] hdmitx: audio: set audio param
  1046. [ 15.909370@2] aml_i2s_close device type 2
  1047. [ 16.063060@1] buf=0
  1048. [ 16.063071@1] IEC958_mode_raw=0
  1049. [ 16.063113@1] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
  1050. [ 16.063119@1] last mode 0,now 0
  1051. [ 16.069402@1] ----aml_hw_iec958_init,runtime->rate=44100--
  1052. [ 16.069416@1] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
  1053. [ 16.069421@1] audio_set_958_clk, freq=5,
  1054. [ 16.069427@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1055. [ 16.069433@1] iec958 mode PCM32
  1056. [ 16.069440@1] IEC958 PCM32
  1057. [ 16.069446@1] hdmitx: audio: aout notify rate 44100
  1058. [ 16.069452@1] hdmitx: audio: aout notify size 32
  1059. [ 16.069459@1] hdmitx: audio: audio channel num is 1
  1060. [ 16.069467@1] hdmitx: audio: SPDIF
  1061. [ 16.069478@1] hdmitx: audio: current VIC: 4
  1062. [ 16.069482@1] hdmitx: audio: audio sample rate: 2
  1063. [ 16.069486@1] hdmitx: audio: reset audio N para
  1064. [ 16.069497@1] hdmitx: audio: PCM out to HDMI
  1065. [ 16.069501@1] hdmitx: audio: i2s_to_spdif_flag:1
  1066. [ 16.069504@1] hdmitx: audio: Enable audio spdif to HDMI
  1067. [ 16.069511@1] hdmitx: audio: Audio Type: PCM
  1068. [ 16.069553@1] hdmitx: audio: set audio param
  1069. [ 16.069559@1] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1070. [ 16.069624@2] enter aml_set_bias_level level: 1
  1071. [ 16.069631@2] enter aml_set_bias_level level: 2
  1072. [ 16.069862@1] ----aml_hw_iec958_init,runtime->rate=44100--
  1073. [ 16.069869@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1074. [ 16.069875@1] iec958 mode PCM32
  1075. [ 16.069881@1] IEC958 PCM32
  1076. [ 16.069887@1] hdmitx: audio: aout notify rate 44100
  1077. [ 16.069891@1] hdmitx: audio: aout notify size 32
  1078. [ 16.069897@1] hdmitx: audio: audio channel num is 1
  1079. [ 16.069903@1] hdmitx: audio: SPDIF
  1080. [ 16.069914@1] hdmitx: audio: current VIC: 4
  1081. [ 16.069918@1] hdmitx: audio: audio sample rate: 2
  1082. [ 16.069922@1] hdmitx: audio: reset audio N para
  1083. [ 16.069931@1] hdmitx: audio: PCM out to HDMI
  1084. [ 16.069936@1] hdmitx: audio: i2s_to_spdif_flag:1
  1085. [ 16.069940@1] hdmitx: audio: Enable audio spdif to HDMI
  1086. [ 16.069946@1] hdmitx: audio: Audio Type: PCM
  1087. [ 16.069987@1] hdmitx: audio: set audio param
  1088. [ 16.069992@1] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1089. [ 16.070025@1] enter aml_set_bias_level level: 1
  1090. [ 16.070031@1] enter aml_set_bias_level level: 2
  1091. [ 16.075210@1] [aml-spdif-dai]aiu 958 playback enable
  1092. [ 16.537113@1] [sdio_reinit] finish
  1093. [ 16.578190@3] hdmitx: edid: not find mapped display mode
  1094. [ 16.601919@1] RTL871X: rtw_ndev_init(wlan1)
  1095. [ 16.603871@1] RTL871X: rtw_ndev_init(wlan2)
  1096. [ 16.606482@1] RTL871X: module init ret=0
  1097. [ 16.610310@2] tvmode set to 1080p
  1098. [ 16.610335@2] mode is 15,sync_duration_den=1,sync_duration_num=60
  1099. [ 16.610344@2] request vpu clk holdings: vencp 159375000Hz
  1100. [ 16.610350@2] TV mode 1080p selected.
  1101. [ 16.610359@2] tvoutc_setmode[489]
  1102. [ 16.610364@2] new mode 1080p set ok
  1103. [ 16.610373@2] hdmitx: video: get current mode: 1080p
  1104. [ 16.610380@2] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
  1105. [ 16.610387@2] hdmitx: video: get current mode: 1080p
  1106. [ 16.610396@2] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
  1107. [ 16.610403@2] hdmitx: system: gate/pwr cmd: 7
  1108. [ 16.610448@2] hdmitx: system: already init VIC = 0 Now VIC = 16
  1109. [ 16.610456@2] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
  1110. [ 16.610461@2] hdmitx: system: gate/pwr cmd: 0
  1111. [ 16.610467@2] hdmitx: system: hw reset
  1112. [ 16.611515@2] hdmitx: audio: SPDIF
  1113. [ 16.611574@2] reconfig packet setting done
  1114. [ 16.612822@1] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.19
  1115. [ 16.612832@1] rtk_btusb: Register usb char device interface for BT driver
  1116. [ 16.616588@1] usbcore: registered new interface driver rtk_btusb
  1117. [ 16.631576@2] hdmitx: system: set pll
  1118. [ 16.631593@2] hdmitx: system: param->VIC:16
  1119. [ 16.631607@2] mode is: 15
  1120. [ 16.631614@2] VPU_VIU_VENC_MUX_CTRL: 0xa
  1121. [ 16.631618@2] viu chan = 1
  1122. [ 16.631622@2] VPU_VIU_VENC_MUX_CTRL: 0xa
  1123. [ 16.631625@2] config HPLL
  1124. [ 16.631630@2] set_hpll_clk_out[167] clk = 2970
  1125. [ 16.654572@2] config HPLL done
  1126. [ 16.654606@2] enc_vpu_bridge_reset[290]
  1127. [ 16.792085@2] hdmitx: system: phy setting done
  1128. [ 16.792100@2] Sink is HDMI device
  1129. [ 16.792110@2] No sink attached
  1130. [ 16.792155@2] hdmitx: audio: audio channel num is 1
  1131. [ 16.792163@2] hdmitx: audio: SPDIF
  1132. [ 16.792175@2] hdmitx: audio: current VIC: 16
  1133. [ 16.792179@2] hdmitx: audio: audio sample rate: 2
  1134. [ 16.792183@2] hdmitx: audio: reset audio N para
  1135. [ 16.792194@2] hdmitx: audio: PCM out to HDMI
  1136. [ 16.792198@2] hdmitx: audio: i2s_to_spdif_flag:1
  1137. [ 16.792202@2] hdmitx: audio: Enable audio spdif to HDMI
  1138. [ 16.792209@2] hdmitx: audio: Audio Type: PCM
  1139. [ 16.805686@2] set_vout_mode[174]
  1140. [ 18.099381@0] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1141. [ 18.155205@3] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
  1142. [ 18.254992@0] hdmitx: system: irq 2
  1143. [ 18.312153@2] hdmitx: system: gate/pwr cmd: 7
  1144. [ 18.615075@0] hdmitx: system: irq 1
  1145. [ 18.642463@2] hdmitx: system: gate/pwr cmd: 4
  1146. [ 18.835522@1] RTL871X: nolinked power save enter
  1147. [ 18.852343@2] hdmitx: system: gate/pwr cmd: 5
  1148. [ 18.852358@2] hdmitx: edid: edid ready
  1149. [ 18.852368@2] hdmitx: system: gate/pwr cmd: 4
  1150. [ 19.062322@2] hdmitx: system: gate/pwr cmd: 5
  1151. [ 19.062333@2] hdmitx: edid: edid ready
  1152. [ 19.062342@2] hdmitx: edid: check sum valid
  1153. [ 19.062345@2] hdmitx: edid: check sum valid
  1154. [ 19.062350@2] hdmitx: edid: blk0 raw data
  1155. [ 15.522131@2] [aml_sdio_timeout] time_start_cnt:999
  1156. [ 15.522131@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=1, pdata->width=1, conf=0x41727001, clock=39843750
  1157. [ 15.522131@2] [aml_sdio_timeout] time_start_cnt:999
  1158. [ 15.522131@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=1, pdata->width=1, conf=0x41727001, clock=39843750
  1159. [ 15.522131@2] 
  1160. [ 19.062356@2] 00ffffffffffff00410c00000101010103140103808048780ae692a3544a9926
  1161. [ 19.062394@2] 0f4a4c2108008bc08180a94001010101010101010101023a801871382d40582c
  1162. [ 19.062431@2] 450000d05200001e023a80d072382d40102c458000d05200001e000000fc0050
  1163. [ 19.062466@2] 68696c697073204654560a20000000fd00303e0f4611000a20202020202001c9
  1164. [ 19.062501@2]
  1165. [ 19.062506@2] hdmitx: edid: blk1 raw data
  1166. [ 19.062510@2] 020331f152101f2022210514041312031102160715060126091f071507508301
  1167. [ 19.062541@2] 00006a030c005000382d802e2ee3050301011d803e73382d407e2c458000d052
  1168. [ 19.062580@2] 00001e011d80d0721c1620102c258000d05200009e011d00bc52d01e20b82855
  1169. [ 19.062615@2] 4000d05200001e011d8018711c1620582c250000d05200009e000000000000e2
  1170. [ 19.062647@2]
  1171. [ 19.087184@2] hdmitx: edid: find IEEEOUT
  1172. [ 19.087246@2] hdmitx: video: get current mode: 1080p
  1173. [ 19.087259@2] is_similar_hdmi_vic[325] vic_old=0,mode_new=15
  1174. [ 19.087268@2] hdmitx: system: gate/pwr cmd: 7
  1175. [ 19.087317@2] hdmitx: system: already init VIC = 0 Now VIC = 16
  1176. [ 19.087330@2] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
  1177. [ 19.087335@2] hdmitx: system: gate/pwr cmd: 0
  1178. [ 19.087342@2] hdmitx: system: hw reset
  1179. [ 19.088392@2] hdmitx: audio: SPDIF
  1180. [ 19.088454@2] reconfig packet setting done
  1181. [ 19.108456@2] hdmitx: system: set pll
  1182. [ 19.108470@2] hdmitx: system: param->VIC:16
  1183. [ 19.108480@2] mode is: 15
  1184. [ 19.108487@2] VPU_VIU_VENC_MUX_CTRL: 0xa
  1185. [ 19.108490@2] viu chan = 1
  1186. [ 19.108494@2] VPU_VIU_VENC_MUX_CTRL: 0xa
  1187. [ 19.108498@2] config HPLL
  1188. [ 19.108503@2] set_hpll_clk_out[167] clk = 2970
  1189. [ 19.122186@2] config HPLL done
  1190. [ 19.122216@2] enc_vpu_bridge_reset[290]
  1191. [ 19.262121@2] hdmitx: system: phy setting done
  1192. [ 19.262145@2] Sink is HDMI device
  1193. [ 19.262154@2] No sink attached
  1194. [ 19.262206@2] hdmitx: audio: audio channel num is 1
  1195. [ 19.262216@2] hdmitx: audio: SPDIF
  1196. [ 19.262227@2] hdmitx: audio: current VIC: 16
  1197. [ 19.262231@2] hdmitx: audio: audio sample rate: 2
  1198. [ 19.262236@2] hdmitx: audio: reset audio N para
  1199. [ 19.262247@2] hdmitx: audio: PCM out to HDMI
  1200. [ 19.262251@2] hdmitx: audio: i2s_to_spdif_flag:1
  1201. [ 19.262255@2] hdmitx: audio: Enable audio spdif to HDMI
  1202. [ 19.262264@2] hdmitx: audio: Audio Type: PCM
  1203. [ 19.262310@2] hdmitx: audio: audio channel num is 1
  1204. [ 19.262316@2] hdmitx: audio: SPDIF
  1205. [ 19.262327@2] hdmitx: audio: current VIC: 16
  1206. [ 19.262331@2] hdmitx: audio: audio sample rate: 2
  1207. [ 19.262334@2] hdmitx: audio: reset audio N para
  1208. [ 19.262344@2] hdmitx: audio: PCM out to HDMI
  1209. [ 19.262348@2] hdmitx: audio: i2s_to_spdif_flag:1
  1210. [ 19.262352@2] hdmitx: audio: Enable audio spdif to HDMI
  1211. [ 19.262358@2] hdmitx: audio: Audio Type: PCM
  1212. [ 19.262624@2] hdmitx: cec: CEC node init
  1213. [ 19.262634@2] hdmitx: cec: cec_func_config: 0xf; P_AO_DEBUG_REG0:0xf
  1214. [ 19.262641@2] hdmitx: cec: Set PWM_E out put RTC 32K!
  1215. [ 19.262646@2] hdmitx: cec: enable:int mask:0x6
  1216. [ 19.263499@2] hdmitx: cec: CEC: start poll dev
  1217. [ 19.464324@2] hdmitx: cec: hw reset :logical addr:0x14
  1218. [ 19.464341@2] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 0
  1219. [ 19.464347@2] hdmitx: cec: player_dev[0]:0x4
  1220. [ 19.464352@2] hdmitx: cec: physical address:0x5000
  1221. [ 19.464438@2] hdmitx: cec: Set logical address: 4
  1222. [ 20.191765@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
  1223. [ 20.334634@0] hdmitx: cec: opcode:0x8c, hdmitx_device->cec_func_config:0xf
  1224. [ 20.522566@0] hdmitx: cec: opcode:0x9f, hdmitx_device->cec_func_config:0xf
  1225. [ 20.602106@2] hdmitx: cec: cec node init: cec features ok !
  1226. [ 20.672848@0] hdmitx: cec: opcode:0x8c, hdmitx_device->cec_func_config:0xf
  1227. [ 20.788518@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
  1228. [ 20.892154@3] enter aml_set_bias_level level: 1
  1229. [ 20.892165@3] enter aml_set_bias_level level: 2
  1230. [ 21.327361@1] RTL871X: nolinked power save leave
  1231. [ 21.581087@0] hdmitx: cec: opcode:0x46, hdmitx_device->cec_func_config:0xf
  1232. [ 22.845606@1] RTL871X: nolinked power save enter
  1233. [ 23.402108@1] hdmitx: cec: CEC node init
  1234. [ 23.402126@1] hdmitx: cec: cec_func_config: 0xf; P_AO_DEBUG_REG0:0xf
  1235. [ 23.402133@1] hdmitx: cec: Set PWM_E out put RTC 32K!
  1236. [ 23.402138@1] hdmitx: cec: enable:int mask:0x6
  1237. [ 23.403002@1] hdmitx: cec: CEC: start poll dev
  1238. [ 23.604349@1] hdmitx: cec: hw reset :logical addr:0x14
  1239. [ 23.604361@1] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 0
  1240. [ 23.604366@1] hdmitx: cec: player_dev[0]:0x4
  1241. [ 23.604371@1] hdmitx: cec: physical address:0x5000
  1242. [ 23.604462@1] hdmitx: cec: Set logical address: 4
  1243. [ 24.332847@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
  1244. [ 24.842106@3] hdmitx: cec: cec node init: cec features ok !
  1245. [ 24.842290@3] hdmitx: cec: cec_set_menu_language:p.o.r
  1246. [ 24.933795@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
  1247. [ 25.323950@1] hdmitx: cec: cec_set_menu_language:p.o.r
  1248. [ 30.298627@2] AO cpu stop ok.
  1249. [ 30.299024@2] AO cpu runs ok.
  1250. [ 30.299286@2] AO cpu stop ok.
  1251. [ 30.299670@2] AO cpu runs ok.
  1252. [ 30.326599@1] RTL871X: nolinked power save leave
  1253. [ 32.039437@1] RTL871X: nolinked power save enter
  1254. [ 57.359136@0] RTL871X: nolinked power save leave
  1255. [ 59.038313@1] RTL871X: nolinked power save enter
  1256. [ 76.261442@0] [aml-spdif-dai]aiu 958 playback disable
  1257. [ 76.262012@0] ----aml_hw_iec958_init,runtime->rate=44100--
  1258. [ 76.262023@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1259. [ 76.262030@0] iec958 mode PCM32
  1260. [ 76.262041@0] IEC958 PCM32
  1261. [ 76.262048@0] hdmitx: audio: aout notify rate 44100
  1262. [ 76.262053@0] hdmitx: audio: aout notify size 32
  1263. [ 76.262155@0] hdmitx: audio: audio channel num is 1
  1264. [ 76.262172@0] hdmitx: audio: SPDIF
  1265. [ 76.262184@0] hdmitx: audio: current VIC: 16
  1266. [ 76.262188@0] hdmitx: audio: audio sample rate: 2
  1267. [ 76.262192@0] hdmitx: audio: reset audio N para
  1268. [ 76.262202@0] hdmitx: audio: PCM out to HDMI
  1269. [ 76.262207@0] hdmitx: audio: i2s_to_spdif_flag:1
  1270. [ 76.262210@0] hdmitx: audio: Enable audio spdif to HDMI
  1271. [ 76.262217@0] hdmitx: audio: Audio Type: PCM
  1272. [ 76.262261@0] hdmitx: audio: set audio param
  1273. [ 76.262268@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1274. [ 76.262330@1] enter aml_set_bias_level level: 1
  1275. [ 76.262343@1] enter aml_set_bias_level level: 2
  1276. [ 86.263271@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
  1277. [ 86.263289@0] audio_set_958_clk, freq=4,
  1278. [ 86.263299@0] IEC958 16bit
  1279. [ 86.263307@0] hdmitx: audio: aout notify rate 48000
  1280. [ 86.263311@0] hdmitx: audio: aout notify size 16
  1281. [ 86.263320@0] hdmitx: audio: audio channel num is 1
  1282. [ 86.263327@0] hdmitx: audio: SPDIF
  1283. [ 86.263338@0] hdmitx: audio: current VIC: 16
  1284. [ 86.263342@0] hdmitx: audio: audio sample rate: 3
  1285. [ 86.263346@0] hdmitx: audio: reset audio N para
  1286. [ 86.263360@0] hdmitx: audio: PCM out to HDMI
  1287. [ 86.263365@0] hdmitx: audio: i2s_to_spdif_flag:1
  1288. [ 86.263368@0] hdmitx: audio: Enable audio spdif to HDMI
  1289. [ 86.263375@0] hdmitx: audio: Audio Type: PCM
  1290. [ 86.263417@0] hdmitx: audio: set audio param
  1291. [ 86.263425@0] aml_i2s_close device type 2
  1292. [ 91.272133@3] enter aml_set_bias_level level: 1
  1293. [ 91.272146@3] enter aml_set_bias_level level: 2
  1294. [ 134.197888@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1295. [ 134.197901@0] hdmitx: cec: : Key pressed
  1296. [ 134.197906@0] hdmitx: cec: :operands_irq[0]:0x4
  1297. [ 134.197921@0] hdmitx: cec: :key map:106
  1298. [ 134.213594@0] buf=0
  1299. [ 134.213609@0] IEC958_mode_raw=0
  1300. [ 134.213665@0] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
  1301. [ 134.213670@0] last mode 0,now 0
  1302. [ 134.223651@0] ----aml_hw_iec958_init,runtime->rate=44100--
  1303. [ 134.223672@0] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
  1304. [ 134.223678@0] audio_set_958_clk, freq=5,
  1305. [ 134.223684@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1306. [ 134.223691@0] iec958 mode PCM32
  1307. [ 134.223701@0] IEC958 PCM32
  1308. [ 134.223710@0] hdmitx: audio: aout notify rate 44100
  1309. [ 134.223719@0] hdmitx: audio: aout notify size 32
  1310. [ 134.223730@0] hdmitx: audio: audio channel num is 1
  1311. [ 134.223739@0] hdmitx: audio: SPDIF
  1312. [ 134.223751@0] hdmitx: audio: current VIC: 16
  1313. [ 134.223755@0] hdmitx: audio: audio sample rate: 2
  1314. [ 134.223759@0] hdmitx: audio: reset audio N para
  1315. [ 134.223770@0] hdmitx: audio: PCM out to HDMI
  1316. [ 134.223775@0] hdmitx: audio: i2s_to_spdif_flag:1
  1317. [ 134.223779@0] hdmitx: audio: Enable audio spdif to HDMI
  1318. [ 134.223787@0] hdmitx: audio: Audio Type: PCM
  1319. [ 134.223834@0] hdmitx: audio: set audio param
  1320. [ 134.223840@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1321. [ 134.224007@0] enter aml_set_bias_level level: 1
  1322. [ 134.224015@0] enter aml_set_bias_level level: 2
  1323. [ 134.224108@0] ----aml_hw_iec958_init,runtime->rate=44100--
  1324. [ 134.224116@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1325. [ 134.224124@0] iec958 mode PCM32
  1326. [ 134.224132@0] IEC958 PCM32
  1327. [ 134.224139@0] hdmitx: audio: aout notify rate 44100
  1328. [ 134.224144@0] hdmitx: audio: aout notify size 32
  1329. [ 134.224151@0] hdmitx: audio: audio channel num is 1
  1330. [ 134.224158@0] hdmitx: audio: SPDIF
  1331. [ 134.224169@0] hdmitx: audio: current VIC: 16
  1332. [ 134.224173@0] hdmitx: audio: audio sample rate: 2
  1333. [ 134.224177@0] hdmitx: audio: reset audio N para
  1334. [ 134.224188@0] hdmitx: audio: PCM out to HDMI
  1335. [ 134.224192@0] hdmitx: audio: i2s_to_spdif_flag:1
  1336. [ 134.224196@0] hdmitx: audio: Enable audio spdif to HDMI
  1337. [ 134.224202@0] hdmitx: audio: Audio Type: PCM
  1338. [ 134.224247@0] hdmitx: audio: set audio param
  1339. [ 134.224253@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1340. [ 134.224295@0] enter aml_set_bias_level level: 1
  1341. [ 134.224301@0] enter aml_set_bias_level level: 2
  1342. [ 134.229046@0] [aml-spdif-dai]aiu 958 playback enable
  1343. [ 134.540978@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1344. [ 134.632656@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1345. [ 134.632667@0] hdmitx: cec: : Key pressed
  1346. [ 134.632672@0] hdmitx: cec: :operands_irq[0]:0x4
  1347. [ 134.632686@0] hdmitx: cec: :key map:106
  1348. [ 134.852557@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1349. [ 134.944133@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1350. [ 134.944135@0] hdmitx: cec: : Key pressed
  1351. [ 134.944138@0] hdmitx: cec: :operands_irq[0]:0x4
  1352. [ 134.944151@0] hdmitx: cec: :key map:106
  1353. [ 135.225654@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1354. [ 135.756745@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1355. [ 135.756757@0] hdmitx: cec: : Key pressed
  1356. [ 135.756762@0] hdmitx: cec: :operands_irq[0]:0x2
  1357. [ 135.756776@0] hdmitx: cec: :key map:108
  1358. [ 136.089006@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1359. [ 136.250235@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1360. [ 136.250247@0] hdmitx: cec: : Key pressed
  1361. [ 136.250252@0] hdmitx: cec: :operands_irq[0]:0x4
  1362. [ 136.250267@0] hdmitx: cec: :key map:106
  1363. [ 136.544397@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1364. [ 136.636045@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1365. [ 136.636056@0] hdmitx: cec: : Key pressed
  1366. [ 136.636061@0] hdmitx: cec: :operands_irq[0]:0x4
  1367. [ 136.636075@0] hdmitx: cec: :key map:106
  1368. [ 136.774584@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1369. [ 136.866199@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1370. [ 136.866302@0] hdmitx: cec: : Key pressed
  1371. [ 136.866374@0] hdmitx: cec: :operands_irq[0]:0x4
  1372. [ 136.866512@0] hdmitx: cec: :key map:106
  1373. [ 137.013829@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1374. [ 137.105583@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1375. [ 137.105596@0] hdmitx: cec: : Key pressed
  1376. [ 137.105602@0] hdmitx: cec: :operands_irq[0]:0x4
  1377. [ 137.105618@0] hdmitx: cec: :key map:106
  1378. [ 137.385948@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1379. [ 137.528079@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
  1380. [ 137.528091@0] hdmitx: cec: : Key pressed
  1381. [ 137.528096@0] hdmitx: cec: :operands_irq[0]:0x0
  1382. [ 137.528110@0] hdmitx: cec: :key map:353
  1383. [ 137.866198@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
  1384. [ 138.327052@1] RTL871X: nolinked power save leave
  1385. [ 139.855370@1] RTL871X: nolinked power save enter
  1386. [ 197.991289@0] [aml-spdif-dai]aiu 958 playback disable
  1387. [ 197.991356@0] ----aml_hw_iec958_init,runtime->rate=44100--
  1388. [ 197.991364@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  1389. [ 197.991372@0] iec958 mode PCM32
  1390. [ 197.991385@0] IEC958 PCM32
  1391. [ 197.991395@0] hdmitx: audio: aout notify rate 44100
  1392. [ 197.991401@0] hdmitx: audio: aout notify size 32
  1393. [ 197.991411@0] hdmitx: audio: audio channel num is 1
  1394. [ 197.991421@0] hdmitx: audio: SPDIF
  1395. [ 197.991433@0] hdmitx: audio: current VIC: 16
  1396. [ 197.991437@0] hdmitx: audio: audio sample rate: 2
  1397. [ 197.991442@0] hdmitx: audio: reset audio N para
  1398. [ 197.991452@0] hdmitx: audio: PCM out to HDMI
  1399. [ 197.991457@0] hdmitx: audio: i2s_to_spdif_flag:1
  1400. [ 197.991461@0] hdmitx: audio: Enable audio spdif to HDMI
  1401. [ 197.991468@0] hdmitx: audio: Audio Type: PCM
  1402. [ 197.991513@0] hdmitx: audio: set audio param
  1403. [ 197.991519@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
  1404. [ 197.991593@0] enter aml_set_bias_level level: 1
  1405. [ 197.991600@0] enter aml_set_bias_level level: 2
  1406. [ 207.993202@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
  1407. [ 207.993352@0] audio_set_958_clk, freq=4,
  1408. [ 207.993472@0] IEC958 16bit
  1409. [ 207.993578@0] hdmitx: audio: aout notify rate 48000
  1410. [ 207.993667@0] hdmitx: audio: aout notify size 16
  1411. [ 207.993773@0] hdmitx: audio: audio channel num is 1
  1412. [ 207.993878@0] hdmitx: audio: SPDIF
  1413. [ 207.994001@0] hdmitx: audio: current VIC: 16
  1414. [ 207.994083@0] hdmitx: audio: audio sample rate: 3
  1415. [ 207.994164@0] hdmitx: audio: reset audio N para
  1416. [ 207.994284@0] hdmitx: audio: PCM out to HDMI
  1417. [ 207.994370@0] hdmitx: audio: i2s_to_spdif_flag:1
  1418. [ 207.994448@0] hdmitx: audio: Enable audio spdif to HDMI
  1419. [ 207.994525@0] hdmitx: audio: Audio Type: PCM
  1420. [ 207.994866@0] hdmitx: audio: set audio param
  1421. [ 207.994975@0] aml_i2s_close device type 2
  1422. [ 213.002246@3] enter aml_set_bias_level level: 1
  1423. [ 213.002277@3] enter aml_set_bias_level level: 2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!