Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>Initializing cgroup subsys cpu
- <5>Linux version 3.0.8-gac5ed5c (build02@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Sun Aug 25 00:21:35 PDT 2013
- <4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- <4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>Machine: encore
- <4>Ignoring unrecognised tag 0x54410008
- <6>Reserving 10485760 bytes SDRAM for VRAM
- <4>Memory policy: ECC disabled, Data cache writeback
- <6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
- <7>On node 0 totalpages: 118272
- <7>free_area_init_node: node 0, pgdat c07c6ce0, node_mem_map c096c000
- <7> Normal zone: 1024 pages used for memmap
- <7> Normal zone: 0 pages reserved
- <7> Normal zone: 117248 pages, LIFO batch:31
- <6>Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- <6>Reprogramming SDRC clock to 332000000 Hz
- <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>pcpu-alloc: [0] 0
- <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117248
- <5>Kernel command line: console=ttyO0,115200n8 rw init=/init videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend backlighttype=07019G11B0757WAAB9B-6JKD8Y01577C
- <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>Memory: 224MB 237MB 1MB = 462MB total
- <5>Memory: 458712k/458712k available, 65576k reserved, 0K highmem
- <5>Virtual kernel memory layout:
- <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5> vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
- <5> lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5> .init : 0xc0008000 - 0xc003d000 ( 212 kB)
- <5> .text : 0xc003d000 - 0xc07672c0 (7337 kB)
- <5> .data : 0xc0768000 - 0xc07c8940 ( 387 kB)
- <5> .bss : 0xc07c8964 - 0xc096b668 (1676 kB)
- <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>NR_IRQS:410
- <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- <6>Total of 96 interrupts on 1 active controller
- <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>Console: colour dummy device 80x30
- <6>Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- <6>pid_max: default: 32768 minimum: 301
- <6>Mount-cache hash table entries: 512
- <6>Initializing cgroup subsys debug
- <6>Initializing cgroup subsys cpuacct
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys bfqio
- <6>CPU: Testing write buffer coherency: ok
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- <6>print_constraints: dummy:
- <6>NET: Registered protocol family 16
- <6>GPMC revision 5.0
- <6>OMAP GPIO hardware version 2.5
- <6>omap_mux_init: Add partition: #1: core, flags: 0
- <4>board-3621_evt1a.c: kxtf9_dev_init ...
- <4>board-3621_evt1a.c: kxtf9_dev_init > Init kxtf9 irq pin 113 !
- <4>board-3621_evt1a.c: max17042_dev_init ...
- <4>board-3621_evt1a.c: max17042_dev_init > Init max17042 irq pin 100 !
- <4>max17042 GPIO pin read 1
- <4>Enabling backlight PWM for LCD
- <6> wl127x_vio_leakage_fix
- <6>hw-breakpoint: debug architecture 0x4 unsupported.
- <6>OMAP DMA hardware revision 5.0
- <6>bio: create slab <bio-0> at 0
- <6>print_constraints: vdd_lcdtp: 3300 mV normal
- <6>print_constraints: vwl1271: 1800 mV
- <6>print_constraints: vmmc2: 1850 mV
- <4>i2c-core: driver [twl] using legacy suspend method
- <4>i2c-core: driver [twl] using legacy resume method
- <5>SCSI subsystem initialized
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
- <6>twl4030: PIH (irq 7) chaining IRQs 368..375
- <6>twl4030: power (irq 373) chaining IRQs 376..383
- <6>twl4030: gpio (irq 368) chaining IRQs 384..401
- <4>******IN boxer_twl_gpio_setup********
- <6>print_constraints: VUSB1V5: 1500 mV normal standby
- <6>print_constraints: VUSB1V8: 1800 mV normal standby
- <6>print_constraints: VUSB3V1: 3100 mV normal standby
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- <6>print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- <6>print_constraints: VDAC: 1800 mV normal standby
- <6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>Bluetooth: Core ver 2.16
- <6>NET: Registered protocol family 31
- <6>Bluetooth: HCI device and connection manager initialized
- <6>Bluetooth: HCI socket layer initialized
- <6>Bluetooth: L2CAP socket layer initialized
- <6>Bluetooth: SCO socket layer initialized
- <6>Switching to clocksource 32k_counter
- <6>Switched to NOHz mode on CPU #0
- <6>musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>musb-hdrc: MHDRC RTL version 1.800
- <7>musb-hdrc: setup fifo_mode 4
- <7>musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>TCP: Hash tables configured (established 16384 bind 16384)
- <6>TCP reno registered
- <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>NET: Registered protocol family 1
- <6>RPC: Registered named UNIX socket transport module.
- <6>RPC: Registered udp transport module.
- <6>RPC: Registered tcp transport module.
- <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>Trying to unpack rootfs image as initramfs...
- <6>Freeing initrd memory: 184K
- <6>omap_dsp_init: 600000 bytes @ 9ce00000
- <4>Enabling VAUX for wifi
- <6>ram_console: got buffer at 8e000000, size 100000
- <6>ram_console: found existing buffer, size 34239, start 34239
- <6>console [ram-1] enabled
- <6>omap-iommu omap-iommu.0: isp registered
- <6>ashmem: initialized
- <6>fuse init (API version 7.16)
- <6>msgmni has been set to 896
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered (default)
- <6>io scheduler bfq registered
- <6>OMAP DSS rev 2.0
- <6> boxer : boxer_lcd_init called , line 335
- <6> boxer : boxer_spi_probe called , line 305
- <6>boxer: spi setup returned : 0
- <6> boxer : boxer_panel_probe called , line 156
- <6>dsscomp: initializing.
- <7>misc dsscomp: display0=boxer_panel_drv
- <6>misc dsscomp: found 1 displays and 3 overlays
- <6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- <6>console [ttyO0] enabled
- <6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- <6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- <6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- <6>omap_ion_probe: adding heap omap3_carveout of type 2 with 9df00000@1e00000
- <6>brd: module loaded
- <6>loop: module loaded
- <6>(stk) :sysfs entries created
- <6>(stk) : debugfs entries created
- <6>(hci_tty): inside hci_tty_init
- <6>(hci_tty): allocated 251, 0
- <6>PPP generic driver version 2.4.2
- <6>PPP Deflate Compression module registered
- <6>PPP BSD Compression module registered
- <6>PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- <6>tun: Universal TUN/TAP device driver, 1.6
- <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>Initializing USB Mass Storage driver...
- <6>usbcore: registered new interface driver usb-storage
- <6>USB Mass Storage support registered.
- <6>usbcore: registered new interface driver usbserial
- <6>usbserial: USB Serial Driver core
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>android_usb gadget: Number of LUNs=2
- <6> lun0: LUN: removable file: (no medium)
- <6> lun1: LUN: removable file: (no medium)
- <6>android_usb gadget: android_usb ready
- <6>musb-hdrc musb-hdrc: MUSB HDRC host driver
- <7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file 'devices'
- <7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file '001'
- <6>musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
- <7>usb usb1: default language 0x0409
- <7>usb usb1: udev 1, busnum 1, minor = 0
- <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>usb usb1: Product: MUSB HDRC host driver
- <6>usb usb1: Manufacturer: Linux 3.0.8-gac5ed5c musb-hcd
- <6>usb usb1: SerialNumber: musb-hdrc
- <7>usb usb1: usb_probe_device
- <7>usb usb1: configuration #1 chosen from 1 choice
- <7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>hub 1-0:1.0: usb_probe_interface
- <7>hub 1-0:1.0: usb_probe_interface - got id
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- <7>hub 1-0:1.0: standalone hub
- <7>hub 1-0:1.0: individual port power switching
- <7>hub 1-0:1.0: no over-current protection
- <7>hub 1-0:1.0: Single TT
- <7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
- <7>hub 1-0:1.0: power on to power good time: 10ms
- <7>hub 1-0:1.0: 100mA bus power budget for each child
- <7>hub 1-0:1.0: local power source is good
- <7>hub 1-0:1.0: enabling power on all ports
- <7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file '001'
- <6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
- <6>input: twl4030-keypad as /devices/platform/omap/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input1
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <4>Reseting TMA340
- <4>cyttsp-i2c: probe of 2-0022 failed with error -5
- <6>ft5x06_init() - FT I2C Touchscreen Driver (Built Aug 25 2013 @ 00:21:00)
- <6>ft5x06_probe() - FT5x06 found on I2C bus.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <6>input: ft5x06-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0038/input/input2
- <6>ft5x06_initialize() - sysfs_create_group() succeeded.
- <6>kxtf9 1-000f: WHO_AM_I = 0x01
- <6>kxtf9(1) detected
- <6>input: kxtf9_accel as /devices/virtual/input/input3
- <6>using rtc device, twl_rtc, for alarms
- <6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <4>twl_rtc twl_rtc: Cannot enable wakeup for IRQ 379
- <6>i2c /dev entries driver
- <6>Linux video capture interface: v2.00
- <6>omap3isp omap3isp: Revision 15.0 found
- <6>omap-iommu omap-iommu.0: isp: version 1.1
- <7>Saving csi2 context
- <7>Restoring csi2 context
- <7>Saving csi2 context
- <6>usbcore: registered new interface driver uvcvideo
- <6>USB Video Class driver (v1.1.0)
- <6>Driver for 1-wire Dallas network protocol.
- <6>omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
- <4>max17042: max17042_init ...
- <4>max17042: max17042_probe ...
- <4>max17042: next history save at 4294936987
- <6>w1_master_driver w1 bus master: Family 1 for 01.000000000000.3d is not registered.
- <4>max17042: max17042_probe > IRQ is 260
- <4>max17042 GPIO pin read 1
- <4>max17042: max17042_device_power_on ...
- <4>max17042: max17042_hw_init ...
- <4>max17042: BATTERY Detected!
- <4>config = 0x2214
- <4>Valert = 0xff9b
- <4>Salert = 0xff05
- <4>config = 0x2214
- <4>config = 0x2214
- <4>shdntimer = 0x0002
- <4>max17042: max17042_verify ...
- <6>max17042 1-0036: Version = 0x0092
- <6>max17042 1-0036: support ver. 1.0.0 enabled
- <4>i2c-core: driver [max17042] using legacy suspend method
- <4>i2c-core: driver [max17042] using legacy resume method
- <4>MAX8903: max8903_charger_init: Charger registering!
- <4>MAX8903: max8903_charger_probe: Charger Initializing...
- <4>MAX8903: max8903_charger_probe: Request CHARGER FLT IRQ successfully!
- <4>MAX8903: max8903_usb_charger_atboot: Charger detected at boot = 0
- <6>device-mapper: uevent: version 1.0.3
- <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- <6>(stk) : st_kim_start
- <6>omap_pwm_led omap_pwm_led: OMAP PWM LED (lcd-backlight) at GP timer 8/0
- <7>Registered led device: lcd-backlight
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- <6>logger: created 256K log 'log_main'
- <6>logger: created 256K log 'log_events'
- <6>logger: created 256K log 'log_radio'
- <6>logger: created 256K log 'log_system'
- <6>zram: num_devices not specified. Using default: 1
- <6>zram: Creating 1 devices ...
- <6>Samsung P17 patch already applied to eMMC
- <6>mmc0: new high speed MMC card at address 0001
- <6>mmcblk0: mmc0:0001 M8G2FA 7.20 GiB
- <6>mmcblk0boot0: mmc0:0001 M8G2FA partition 1 512 KiB
- <6>mmcblk0boot1: mmc0:0001 M8G2FA partition 2 512 KiB
- <6>DSP Bridge driver loaded
- <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
- <6>(stk) :ldisc_install = 1
- <6>usbcore: registered new interface driver snd-usb-audio
- <6> mmcblk0boot1: unknown partition table
- <6> mmcblk0boot0: unknown partition table
- <4>omap3epd-sound: Audio SoC init +
- <4>mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>mmc1: new high speed SDHC card at address e624
- <6>mmcblk1: mmc1:e624 SU08G 7.40 GiB
- <6> mmcblk1: p1 p2 p3 p4
- <6>Completed adding dapm widgets size = 22
- <6>Completed adding DAPM routes = 21
- <6>widgets updated
- <6>asoc: tlv320aic31xx-dai <-> omap-mcbsp-dai.1 mapping ok
- <4>sys_ck = 26000000
- <4>clkout2_src_ck = 26000000
- <4>sys_clkout2 = 13000000
- <4>omap3epd-sound: Audio SoC init -
- <6>ALSA device list:
- <6> #0: OMAP3 EDP(tlv320aic31xx)
- <6>oprofile: hardware counters not available
- <6>oprofile: using timer interrupt.
- <6>GACT probability NOT on
- <6>u32 classifier
- <6> Actions configured
- <6>Netfilter messages via NETLINK v0.30.
- <6>nf_conntrack version 0.5.0 (7170 buckets, 28680 max)
- <6>ctnetlink v0.93: registering with nfnetlink.
- <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>xt_time: kernel timezone is -0000
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP cubic registered
- <6>Initializing XFRM netlink socket
- <4>mmc2: card claims to support voltages below the defined range. These will be ignored.
- <6>NET: Registered protocol family 10
- <6>Mobile IPv6
- <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>IPv6 over IPv4 tunneling driver
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>Bluetooth: RFCOMM TTY layer initialized
- <6>Bluetooth: RFCOMM socket layer initialized
- <6>Bluetooth: RFCOMM ver 1.11
- <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>Bluetooth: BNEP filters: protocol multicast
- <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>lib80211: common routines for IEEE802.11 drivers
- <7>lib80211_crypt: registered algorithm 'NULL'
- <5>Registering the dns_resolver key type
- <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- <6>ThumbEE CPU extension supported.
- <4>mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
- <6>mmc2: new SDIO card at address 0001
- <6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>SmartReflex class 1.5 driver: initialized (86400000ms)
- <6>cpufreq_interactive_input_connect: connect to ft5x06-i2c
- <6>clock: disabling unused clocks to save power
- <6> boxer : boxer_get_timings called , line 102
- <6>cannot apply mgr(tv) on inactive device
- <4>omapfb omapfb: failed to apply dispc config
- <6> boxer : boxer_panel_enable called , line 257
- <6> boxer : boxer_panel_start called , line 177
- <4>regulator_init_complete: VUSB3V1: incomplete constraints, leaving on
- <6>twl_rtc twl_rtc: setting system clock to 2013-08-29 01:40:12 UTC (1377740412)
- <7>Restoring csi2 context
- <6>omap3 omap3isp CSI memvs initted
- <7>Saving csi2 context
- <6>Freeing init memory: 212K
- <3>init: could not import file '/init.carrier.rc' from '/init.rc'
- <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <3>init: do_chown: Could not access /selinux/booleans
- <3>init: do_chown: Could not access /sys/fs/selinux/booleans
- <3>init: cannot open '/initlogo.rle'
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <6>EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>Compat-wireless backport release: ol_R5.SP3.06
- <6>Backport based on wl12xx.git ol_R5.SP3.06
- <6>Calling CRDA to update world regulatory domain
- <6>wl12xx: driver version:
- <6>wl12xx: compilation time: Sun Jul 21 10:47:35 2013
- <6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1200000Calib=1050000 margin=37500
- <6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1362500Calib=1350000 margin=62500
- <3>init: cannot find '/system/bin/auditd', disabling 'auditd'
- <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- <3>android_usb: already disabled
- <3>android_usb: already disabled
- <6>mtp_bind_config
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <6>proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
- <6>proc_start: dsp in running state
- <3>procwrap_detach: deprecated dspbridge ioctl
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <6>(stc): st_tty_open
- <6>(stk) :line discipline installed
- <6>(stk) :TIInit_7.2.31.bts
- <6>(stc): add_channel_to_table: id 2
- <6>(stc): st_register(3)
- <6>(stc): add_channel_to_table: id 3
- <6>(stc): st_register(4)
- <6>(stc): add_channel_to_table: id 4
- <4>MAX8903: max8903_charger_enable: Charger Unplugged!
- <6>(stc): remove_channel_from_table: id 2
- <6>(stc): remove_channel_from_table: id 3
- <6>(stc): remove_channel_from_table: id 4
- <6>(stc): all chnl_ids unregistered
- <6>(stk) :ldisc_install = 0
- <6>(stc): st_tty_close
- <6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <6>request_suspend_state: wakeup (3->0) at 22587310794 (2013-08-29 01:40:30.496643067 UTC)
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1012500Calib=950000 margin=37500
- <6>wl12xx: loaded
- <6>wl12xx: state: 0
- <6>acc_open
- <6>acc_release
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <6>wl12xx: firmware booted (Rev 6.3.10.0.133)
- <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>usb usb1: usb auto-resume
- <7>hub 1-0:1.0: hub_resume
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <7>wlan0: authenticate with 08:3e:8e:5d:1a:46 (try 1)
- <7>wlan0: authenticated
- <7>wlan0: associate with 08:3e:8e:5d:1a:46 (try 1)
- <7>wlan0: RX AssocResp from 08:3e:8e:5d:1a:46 (capab=0x411 status=0 aid=5)
- <7>wlan0: associated
- <7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 1
- <7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 2
- <6>kxtf9 1-000f: IRQ TAP2 [1]
- <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <6>wl12xx: Association completed.
- <7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 3
- <6>kxtf9 1-000f: IRQ TAP2 [1]
- <7>wlan0: no IPv6 routers present
- <6>kxtf9 1-000f: IRQ TAP2 [4]
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <6>kxtf9 1-000f: IRQ TAP2 [1]
- <6>kxtf9 1-000f: IRQ TAP2 [1]
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <3>binder: release proc 2190, transaction 12130, not freed
- <6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1325000Calib=1175000 margin=37500
- <6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
- <6>binder: 1591:1647 transaction failed 29189, size 100-4
- <6>EXT4-fs (dm-0): re-mounted. Opts: (null)
- <6>EXT4-fs (dm-0): re-mounted. Opts: (null)
- <6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1200000Calib=1062500 margin=37500
- <6>request_suspend_state: sleep (0->3) at 73045654301 (2013-08-29 01:41:20.383641357 UTC)
- <4>[twl4030-usb]Enter twl4030_usb_early_suspend.
- <6>ft5x06_suspend() - Driver is suspending.
- <6>DSSCOMP: dsscomp_early_suspend
- <6>DSSCOMP: blanked screen
- <6> boxer : boxer_panel_suspend called , line 269
- <6> boxer : boxer_panel_stop called , line 236
- <6>Samsung P17 patch already applied to eMMC
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ...
- <6>active wake lock PowerManagerService
- <4>
- <3>Freezing of user space aborted
- <4>
- <4>Restarting tasks ... done.
- <6>suspend: exit suspend, ret = -16 (2013-08-29 01:42:23.396733399 UTC)
- <6>request_suspend_state: wakeup (3->0) at 159377044682 (2013-08-29 01:42:46.715062256 UTC)
- <6> boxer : boxer_panel_resume called , line 279
- <6> boxer : boxer_panel_start called , line 177
- <6> boxer : boxer_panel_start sending SPI data , line 209
- <6>Samsung P17 patch already applied to eMMC
- <6>DSSCOMP: dsscomp_late_resume
- <6>ft5x06_resume() - Driver is resuming.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <6>kxtf9 1-000f: IRQ TILT [20]
- <4>[twl4030-usb]Enter twl4030_usb_late_resume.
- <6>kxtf9 1-000f: IRQ TAP1 [1]
- <6>Samsung P17 patch already applied to eMMC
- <6>DMA synchronization event drop occurred with device 33
- <3>binder: release proc 2554, transaction 120971, not freed
- <3>binder: release proc 2554, transaction 120981, not freed
- <3>binder: release proc 2554, transaction 120984, not freed
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <6>kxtf9 1-000f: IRQ TILT [1]
- <6>request_suspend_state: sleep (0->3) at 251170989994 (2013-08-29 01:44:18.509007568 UTC)
- <4>[twl4030-usb]Enter twl4030_usb_early_suspend.
- <6>ft5x06_suspend() - Driver is suspending.
- <6>DSSCOMP: dsscomp_early_suspend
- <6>DSSCOMP: blanked screen
- <6> boxer : boxer_panel_suspend called , line 269
- <6> boxer : boxer_panel_stop called , line 236
- <4>sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=1000000 samples=11
- <6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1000000Calib=937500 margin=37500
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>Samsung P17 patch already applied to eMMC
- <6>PM: suspend of devices complete after 595.001 msecs
- <6>PM: late suspend of devices complete after 0.915 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 3.193 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <6>wakeup wake lock: alarm_rtc
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 462.463 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:23.252476803 UTC)
- <6>active wake lock alarm_rtc, time left 60
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 159.057 msecs
- <6>PM: late suspend of devices complete after 0.366 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 23.117 seconds
- <6>PM: early resume of devices complete after 0.396 msecs
- <7>usb usb1: usb resume
- <6>wakeup wake lock: alarm_rtc
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 463.134 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:48.263524162 UTC)
- <6>active wake lock alarm_rtc, time left 60
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ...
- <6>active wake lock alarm, time left 637
- <4>
- <3>Freezing of user space aborted
- <4>
- <4>Restarting tasks ... done.
- <6>suspend: exit suspend, ret = -16 (2013-08-29 01:44:48.827122794 UTC)
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 159.210 msecs
- <6>active wake lock wl1271_wake
- <3>pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
- <3>PM: Device power.0 failed to suspend late: error -11
- <6>PM: early resume of devices complete after 0.152 msecs
- <3>PM: Some devices failed to power down
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 449.340 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = -11 (2013-08-29 01:44:50.305241690 UTC)
- <6>active wake lock rx_wake, time left 110
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 165.649 msecs
- <6>PM: late suspend of devices complete after 0.976 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 1.911 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: wl1271_wake
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 451.934 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:54.721257312 UTC)
- <6>active wake lock rx_wake, time left 119
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 150.604 msecs
- <6>PM: late suspend of devices complete after 0.671 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 11.769 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 453.582 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:45:09.073826891 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 117
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 173.553 msecs
- <6>PM: late suspend of devices complete after 0.976 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 25.361 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: event0-1591
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 450.103 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>request_suspend_state: wakeup (3->0) at 263501708994 (2013-08-29 01:45:36.190678692 UTC)
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:45:36.213292217 UTC)
- <6>active wake lock main
- <6>active wake lock PowerManagerService.Broadcasts
- <6>active wake lock PowerManagerService
- <6> boxer : boxer_panel_resume called , line 279
- <6> boxer : boxer_panel_start called , line 177
- <6> boxer : boxer_panel_start sending SPI data , line 209
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>DSSCOMP: dsscomp_late_resume
- <6>ft5x06_resume() - Driver is resuming.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <4>[twl4030-usb]Enter twl4030_usb_late_resume.
- <6>kxtf9 1-000f: IRQ TAP2 [10]
- <6>kxtf9 1-000f: IRQ TAP1 [2]
- <6>kxtf9 1-000f: IRQ TAP2 [1]
- <6>request_suspend_state: sleep (0->3) at 293945251474 (2013-08-29 01:46:06.634221172 UTC)
- <4>[twl4030-usb]Enter twl4030_usb_early_suspend.
- <6>ft5x06_suspend() - Driver is suspending.
- <6>DSSCOMP: dsscomp_early_suspend
- <6>DSSCOMP: blanked screen
- <6> boxer : boxer_panel_suspend called , line 269
- <6> boxer : boxer_panel_stop called , line 236
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>Samsung P17 patch already applied to eMMC
- <6>PM: suspend of devices complete after 602.722 msecs
- <6>PM: late suspend of devices complete after 0.915 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 66.824 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 454.254 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:47:15.031437964 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 117
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.843 msecs
- <6>PM: late suspend of devices complete after 0.457 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 22.001 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: event0-1591
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 447.967 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>request_suspend_state: wakeup (3->0) at 297221588146 (2013-08-29 01:47:38.735570040 UTC)
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:47:38.750462618 UTC)
- <6>active wake lock main
- <6>active wake lock PowerManagerService.Broadcasts
- <6>active wake lock PowerManagerService
- <6> boxer : boxer_panel_resume called , line 279
- <6> boxer : boxer_panel_start called , line 177
- <6> boxer : boxer_panel_start sending SPI data , line 209
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>DSSCOMP: dsscomp_late_resume
- <6>ft5x06_resume() - Driver is resuming.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <4>[twl4030-usb]Enter twl4030_usb_late_resume.
- <6>kxtf9 1-000f: IRQ TAP1 [8]
- <6>request_suspend_state: sleep (0->3) at 327665771496 (2013-08-29 01:48:09.179753390 UTC)
- <4>[twl4030-usb]Enter twl4030_usb_early_suspend.
- <6>ft5x06_suspend() - Driver is suspending.
- <6>DSSCOMP: dsscomp_early_suspend
- <6>DSSCOMP: blanked screen
- <6> boxer : boxer_panel_suspend called , line 269
- <6> boxer : boxer_panel_stop called , line 236
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>Samsung P17 patch already applied to eMMC
- <6>PM: suspend of devices complete after 582.305 msecs
- <6>PM: late suspend of devices complete after 1.190 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 70.430 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 437.316 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:49:21.070775112 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 117
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 159.393 msecs
- <6>PM: late suspend of devices complete after 0.488 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 124.257 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 454.467 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:51:27.047001919 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 117
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.843 msecs
- <6>PM: late suspend of devices complete after 0.457 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 66.485 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.396 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 444.580 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:52:35.246861535 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock alarm_rtc, time left 62
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.966 msecs
- <6>PM: late suspend of devices complete after 0.366 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 39.864 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 452.697 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>request_suspend_state: wakeup (3->0) at 333679168719 (2013-08-29 01:53:16.229405477 UTC)
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:53:16.379368856 UTC)
- <6>active wake lock main
- <6>active wake lock PowerManagerService.Broadcasts
- <6>active wake lock PowerManagerService
- <6> boxer : boxer_panel_resume called , line 279
- <6> boxer : boxer_panel_start called , line 177
- <6> boxer : boxer_panel_start sending SPI data , line 209
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>DSSCOMP: dsscomp_late_resume
- <6>ft5x06_resume() - Driver is resuming.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <4>[twl4030-usb]Enter twl4030_usb_late_resume.
- <6>request_suspend_state: sleep (0->3) at 364141632099 (2013-08-29 01:53:46.691838339 UTC)
- <4>[twl4030-usb]Enter twl4030_usb_early_suspend.
- <6>ft5x06_suspend() - Driver is suspending.
- <6>DSSCOMP: dsscomp_early_suspend
- <6>DSSCOMP: blanked screen
- <6> boxer : boxer_panel_suspend called , line 269
- <6> boxer : boxer_panel_stop called , line 236
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>Samsung P17 patch already applied to eMMC
- <6>PM: suspend of devices complete after 239.562 msecs
- <6>PM: late suspend of devices complete after 0.366 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 111.795 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 439.056 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:55:39.509831502 UTC)
- <7>hub 1-0:1.0: hub_resume
- <6>active wake lock alarm, time left 575
- <6>active wake lock rx_wake, time left 120
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 166.473 msecs
- <6>PM: late suspend of devices complete after 0.427 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 119.947 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.488 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 454.437 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:41.233922074 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 124
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ...
- <6>active wake lock rx_wake, time left 125
- <4>
- <3>Freezing of user space aborted
- <4>
- <4>Restarting tasks ... done.
- <6>suspend: exit suspend, ret = -16 (2013-08-29 01:57:42.666417118 UTC)
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 165.740 msecs
- <6>PM: late suspend of devices complete after 0.976 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 0.790 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: wl1271_wake
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 439.819 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:45.202458459 UTC)
- <6>active wake lock rx_wake, time left 118
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.386 msecs
- <6>PM: late suspend of devices complete after 0.671 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 2.371 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: wl1271_wake
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 452.636 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:49.310093957 UTC)
- <6>active wake lock rx_wake, time left 119
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 150.726 msecs
- <6>PM: late suspend of devices complete after 0.671 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 6.370 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: wl1271_wake
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 454.315 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:57.398839068 UTC)
- <6>active wake lock rx_wake, time left 119
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.416 msecs
- <6>PM: late suspend of devices complete after 0.671 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 8.285 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.366 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 455.047 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:58:07.450566365 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock rx_wake, time left 117
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ...
- <6>active wake lock rx_wake, time left 126
- <4>
- <3>Freezing of tasks aborted
- <4>
- <4>Restarting tasks ... done.
- <6>suspend: exit suspend, ret = -16 (2013-08-29 01:58:08.699925496 UTC)
- <6>active wake lock rx_wake, time left 121
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 165.435 msecs
- <6>PM: late suspend of devices complete after 0.976 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 6.996 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: wl1271_wake
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 453.491 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:58:17.474064911 UTC)
- <6>active wake lock rx_wake, time left 118
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 158.172 msecs
- <6>PM: late suspend of devices complete after 0.671 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 46.026 seconds
- <6>wakeup wake lock: alarm
- <6>PM: early resume of devices complete after 0.396 msecs
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 458.770 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:05.262944299 UTC)
- <6>active wake lock PowerManagerService
- <6>active wake lock alarm_rtc, time left 60
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 159.057 msecs
- <6>PM: late suspend of devices complete after 0.366 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 1.587 seconds
- <6>PM: early resume of devices complete after 0.457 msecs
- <7>usb usb1: usb resume
- <6>wakeup wake lock: alarm_rtc
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 449.127 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:08.234532431 UTC)
- <6>active wake lock alarm_rtc, time left 63
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>PM: Syncing filesystems ... done.
- <7>PM: Preparing system for mem sleep
- <4>Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>PM: Entering mem sleep
- <4>config = 0x2214
- <4>config = 0x2014
- <4>MAX17042 suspend function
- <4>max17042: max17042_disable ...
- <6>PM: suspend of devices complete after 173.400 msecs
- <6>PM: late suspend of devices complete after 0.976 msecs
- <6>Successfully put all powerdomains to target state
- <6>Suspended for 27.705 seconds
- <6>PM: early resume of devices complete after 0.366 msecs
- <6>wakeup wake lock: event0-1591
- <7>usb usb1: usb resume
- <7>hub 1-0:1.0: hub_resume
- <6>Samsung P17 patch already applied to eMMC
- <4>config = 0x2014
- <4>config = 0x2214
- <4>MAX17042 resume function
- <4>max17042: max17042_enable ...
- <6>PM: resume of devices complete after 458.312 msecs
- <7>PM: Finishing wakeup.
- <4>Restarting tasks ...
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>done.
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- <7>hub 1-0:1.0: hub_resume
- <6>request_suspend_state: wakeup (3->0) at 382676269597 (2013-08-29 01:59:37.100468706 UTC)
- <6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:37.128361773 UTC)
- <6>active wake lock main
- <6>active wake lock PowerManagerService.Broadcasts
- <6>active wake lock PowerManagerService
- <6> boxer : boxer_panel_resume called , line 279
- <6> boxer : boxer_panel_start called , line 177
- <6> boxer : boxer_panel_start sending SPI data , line 209
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>kxtf9 1-000f: IRQ TILT [20]
- <6>kxtf9 1-000f: IRQ TAP2 [2]
- <6>DSSCOMP: dsscomp_late_resume
- <6>ft5x06_resume() - Driver is resuming.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
- <4>[twl4030-usb]Enter twl4030_usb_late_resume.
- <6>DMA synchronization event drop occurred with device 33
- <6>DMA synchronization event drop occurred with device 33
- <6>kxtf9 1-000f: IRQ TAP2 [10]
- <6>kxtf9 1-000f: IRQ TAP1 [1]
- <6>DMA synchronization event drop occurred with device 33
- <6>Samsung P17 patch already applied to eMMC
- <6>DMA synchronization event drop occurred with device 33
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement