Nook#2_10.1.txt

<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.8-gac5ed5c (build02@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Sun Aug 25 00:21:35 PDT 2013
<4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>Machine: encore
<4>Ignoring unrecognised tag 0x54410008
<6>Reserving 10485760 bytes SDRAM for VRAM
<4>Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
<7>On node 0 totalpages: 118272
<7>free_area_init_node: node 0, pgdat c07c6ce0, node_mem_map c096c000
<7>  Normal zone: 1024 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 117248 pages, LIFO batch:31
<6>Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
<6>Reprogramming SDRC clock to 332000000 Hz
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117248
<5>Kernel command line: console=ttyO0,115200n8 rw init=/init videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend backlighttype=07019G11B0757WAAB9B-6JKD8Y01577C
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 224MB 237MB 1MB = 462MB total
<5>Memory: 458712k/458712k available, 65576k reserved, 0K highmem
<5>Virtual kernel memory layout:
<5>    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
<5>    vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
<5>    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
<5>    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>      .init : 0xc0008000 - 0xc003d000   ( 212 kB)
<5>      .text : 0xc003d000 - 0xc07672c0   (7337 kB)
<5>      .data : 0xc0768000 - 0xc07c8940   ( 387 kB)
<5>       .bss : 0xc07c8964 - 0xc096b668   (1676 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:410
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys bfqio
<6>CPU: Testing write buffer coherency: ok
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>GPMC revision 5.0
<6>OMAP GPIO hardware version 2.5
<6>omap_mux_init: Add partition: #1: core, flags: 0
<4>board-3621_evt1a.c: kxtf9_dev_init ...
<4>board-3621_evt1a.c: kxtf9_dev_init > Init kxtf9 irq pin 113 !
<4>board-3621_evt1a.c: max17042_dev_init ...
<4>board-3621_evt1a.c: max17042_dev_init > Init max17042 irq pin 100 !
<4>max17042 GPIO pin read 1
<4>Enabling backlight PWM for LCD
<6> wl127x_vio_leakage_fix
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>OMAP DMA hardware revision 5.0
<6>bio: create slab <bio-0> at 0
<6>print_constraints: vdd_lcdtp: 3300 mV normal
<6>print_constraints: vwl1271: 1800 mV
<6>print_constraints: vmmc2: 1850 mV
<4>i2c-core: driver [twl] using legacy suspend method
<4>i2c-core: driver [twl] using legacy resume method
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<4>******IN boxer_twl_gpio_setup********
<6>print_constraints: VUSB1V5: 1500 mV normal standby
<6>print_constraints: VUSB1V8: 1800 mV normal standby
<6>print_constraints: VUSB3V1: 3100 mV normal standby
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
<6>print_constraints: VDAC: 1800 mV normal standby
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource 32k_counter
<6>Switched to NOHz mode on CPU #0
<6>musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 1.800
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 184K
<6>omap_dsp_init: 600000 bytes @ 9ce00000
<4>Enabling VAUX for wifi
<6>ram_console: got buffer at 8e000000, size 100000
<6>ram_console: found existing buffer, size 34239, start 34239
<6>console [ram-1] enabled
<6>omap-iommu omap-iommu.0: isp registered
<6>ashmem: initialized
<6>fuse init (API version 7.16)
<6>msgmni has been set to 896
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>io scheduler bfq registered
<6>OMAP DSS rev 2.0
<6> boxer : boxer_lcd_init called , line 335
<6> boxer : boxer_spi_probe called , line 305
<6>boxer: spi setup returned : 0
<6> boxer : boxer_panel_probe called , line 156
<6>dsscomp: initializing.
<7>misc dsscomp: display0=boxer_panel_drv
<6>misc dsscomp: found 1 displays and 3 overlays
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
<6>console [ttyO0] enabled
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
<6>omap_ion_probe: adding heap omap3_carveout of type 2 with 9df00000@1e00000
<6>brd: module loaded
<6>loop: module loaded
<6>(stk) :sysfs entries created
<6>(stk) : debugfs entries created
<6>(hci_tty): inside hci_tty_init
<6>(hci_tty): allocated 251, 0
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc: MUSB HDRC host driver
<7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file 'devices'
<7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file '001'
<6>musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
<7>usb usb1: default language 0x0409
<7>usb usb1: udev 1, busnum 1, minor = 0
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: MUSB HDRC host driver
<6>usb usb1: Manufacturer: Linux 3.0.8-gac5ed5c musb-hcd
<6>usb usb1: SerialNumber: musb-hdrc
<7>usb usb1: usb_probe_device
<7>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: individual port power switching
<7>hub 1-0:1.0: no over-current protection
<7>hub 1-0:1.0: Single TT
<7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 1-0:1.0: power on to power good time: 10ms
<7>hub 1-0:1.0: 100mA bus power budget for each child
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: enabling power on all ports
<7>/opt/jenkins/android/workspace/android/jellybean/kernel/bn/encore/drivers/usb/core/inode.c: creating file '001'
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>input: twl4030-keypad as /devices/platform/omap/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input1
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<4>Reseting TMA340
<4>cyttsp-i2c: probe of 2-0022 failed with error -5
<6>ft5x06_init() - FT I2C Touchscreen Driver (Built Aug 25 2013 @ 00:21:00)
<6>ft5x06_probe() - FT5x06 found on I2C bus.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<6>input: ft5x06-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0038/input/input2
<6>ft5x06_initialize() - sysfs_create_group() succeeded.
<6>kxtf9 1-000f: WHO_AM_I = 0x01
<6>kxtf9(1) detected
<6>input: kxtf9_accel as /devices/virtual/input/input3
<6>using rtc device, twl_rtc, for alarms
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<4>twl_rtc twl_rtc: Cannot enable wakeup for IRQ 379
<6>i2c /dev entries driver
<6>Linux video capture interface: v2.00
<6>omap3isp omap3isp: Revision 15.0 found
<6>omap-iommu omap-iommu.0: isp: version 1.1
<7>Saving csi2 context
<7>Restoring csi2 context
<7>Saving csi2 context
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.1.0)
<6>Driver for 1-wire Dallas network protocol.
<6>omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
<4>max17042: max17042_init ...
<4>max17042: max17042_probe ...
<4>max17042: next history save at 4294936987
<6>w1_master_driver w1 bus master: Family 1 for 01.000000000000.3d is not registered.
<4>max17042: max17042_probe > IRQ is 260
<4>max17042 GPIO pin read 1
<4>max17042: max17042_device_power_on ...
<4>max17042: max17042_hw_init ...
<4>max17042:  BATTERY      Detected!
<4>config = 0x2214
<4>Valert = 0xff9b
<4>Salert = 0xff05
<4>config = 0x2214
<4>config = 0x2214
<4>shdntimer = 0x0002
<4>max17042: max17042_verify ...
<6>max17042 1-0036: Version = 0x0092
<6>max17042 1-0036: support ver. 1.0.0 enabled
<4>i2c-core: driver [max17042] using legacy suspend method
<4>i2c-core: driver [max17042] using legacy resume method
<4>MAX8903: max8903_charger_init: Charger registering!
<4>MAX8903: max8903_charger_probe: Charger Initializing...
<4>MAX8903: max8903_charger_probe: Request CHARGER FLT IRQ successfully!
<4>MAX8903: max8903_usb_charger_atboot: Charger detected at boot = 0
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
<6>(stc): st_register(2)
<6>(stc):  chnl_id list empty :2
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>(stk) : st_kim_start
<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (lcd-backlight) at GP timer 8/0
<7>Registered led device: lcd-backlight
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>Samsung P17 patch already applied to eMMC
<6>mmc0: new high speed MMC card at address 0001
<6>mmcblk0: mmc0:0001 M8G2FA 7.20 GiB
<6>mmcblk0boot0: mmc0:0001 M8G2FA partition 1 512 KiB
<6>mmcblk0boot1: mmc0:0001 M8G2FA partition 2 512 KiB
<6>DSP Bridge driver loaded
<6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
<6>(stk) :ldisc_install = 1
<6>usbcore: registered new interface driver snd-usb-audio
<6> mmcblk0boot1: unknown partition table
<6> mmcblk0boot0: unknown partition table
<4>omap3epd-sound: Audio SoC init +
<4>mmc1: host does not support reading read-only switch. assuming write-enable.
<6>mmc1: new high speed SDHC card at address e624
<6>mmcblk1: mmc1:e624 SU08G 7.40 GiB
<6> mmcblk1: p1 p2 p3 p4
<6>Completed adding dapm widgets size = 22
<6>Completed adding DAPM routes = 21
<6>widgets updated
<6>asoc: tlv320aic31xx-dai <-> omap-mcbsp-dai.1 mapping ok
<4>sys_ck = 26000000
<4>clkout2_src_ck = 26000000
<4>sys_clkout2 = 13000000
<4>omap3epd-sound: Audio SoC init -
<6>ALSA device list:
<6>  #0: OMAP3 EDP(tlv320aic31xx)
<6>oprofile: hardware counters not available
<6>oprofile: using timer interrupt.
<6>GACT probability NOT on
<6>u32 classifier
<6>    Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (7170 buckets, 28680 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>xt_time: kernel timezone is -0000
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<4>mmc2: card claims to support voltages below the defined range. These will be ignored.
<6>NET: Registered protocol family 10
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<5>Registering the dns_resolver key type
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>ThumbEE CPU extension supported.
<4>mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
<6>mmc2: new SDIO card at address 0001
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>SmartReflex class 1.5 driver: initialized (86400000ms)
<6>cpufreq_interactive_input_connect: connect to ft5x06-i2c
<6>clock: disabling unused clocks to save power
<6> boxer : boxer_get_timings called , line 102
<6>cannot apply mgr(tv) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6> boxer : boxer_panel_enable called , line 257
<6> boxer : boxer_panel_start called , line 177
<4>regulator_init_complete: VUSB3V1: incomplete constraints, leaving on
<6>twl_rtc twl_rtc: setting system clock to 2013-08-29 01:40:12 UTC (1377740412)
<7>Restoring csi2 context
<6>omap3 omap3isp CSI memvs initted
<7>Saving csi2 context
<6>Freeing init memory: 212K
<3>init: could not import file '/init.carrier.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>init: do_chown: Could not access /selinux/booleans
<3>init: do_chown: Could not access /sys/fs/selinux/booleans
<3>init: cannot open '/initlogo.rle'
<3>(stk) :ldisc installation timeout
<6>(stk) :ldisc_install = 0
<6>EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: barrier=1
<6>EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1
<6>Compat-wireless backport release: ol_R5.SP3.06
<6>Backport based on wl12xx.git ol_R5.SP3.06
<6>Calling CRDA to update world regulatory domain
<6>wl12xx: driver version:
<6>wl12xx: compilation time: Sun Jul 21 10:47:35 2013
<6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1200000Calib=1050000 margin=37500
<6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1362500Calib=1350000 margin=62500
<3>init: cannot find '/system/bin/auditd', disabling 'auditd'
<3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<3>android_usb: already disabled
<3>android_usb: already disabled
<6>mtp_bind_config
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<6>proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
<6>proc_start: dsp in running state
<3>procwrap_detach: deprecated dspbridge ioctl
<3>(stk) : timed out waiting for ldisc to be un-installed
<6>(stk) :ldisc_install = 1
<6>(stc): st_tty_open
<6>(stk) :line discipline installed
<6>(stk) :TIInit_7.2.31.bts
<6>(stc): add_channel_to_table: id 2
<6>(stc): st_register(3)
<6>(stc): add_channel_to_table: id 3
<6>(stc): st_register(4)
<6>(stc): add_channel_to_table: id 4
<4>MAX8903: max8903_charger_enable: Charger Unplugged!
<6>(stc): remove_channel_from_table: id 2
<6>(stc): remove_channel_from_table: id 3
<6>(stc): remove_channel_from_table: id 4
<6>(stc):  all chnl_ids unregistered
<6>(stk) :ldisc_install = 0
<6>(stc): st_tty_close
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>request_suspend_state: wakeup (3->0) at 22587310794 (2013-08-29 01:40:30.496643067 UTC)
<6>kxtf9 1-000f: IRQ TAP2 [2]
<6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1012500Calib=950000 margin=37500
<6>wl12xx: loaded
<6>wl12xx: state: 0
<6>acc_open
<6>acc_release
<6>kxtf9 1-000f: IRQ TAP2 [2]
<6>wl12xx: firmware booted (Rev 6.3.10.0.133)
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>usb usb1: usb auto-resume
<7>hub 1-0:1.0: hub_resume
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<7>wlan0: authenticate with 08:3e:8e:5d:1a:46 (try 1)
<7>wlan0: authenticated
<7>wlan0: associate with 08:3e:8e:5d:1a:46 (try 1)
<7>wlan0: RX AssocResp from 08:3e:8e:5d:1a:46 (capab=0x411 status=0 aid=5)
<7>wlan0: associated
<7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 1
<7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 2
<6>kxtf9 1-000f: IRQ TAP2 [1]
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>wl12xx: Association completed.
<7>wlan0: moving STA 08:3e:8e:5d:1a:46 to state 3
<6>kxtf9 1-000f: IRQ TAP2 [1]
<7>wlan0: no IPv6 routers present
<6>kxtf9 1-000f: IRQ TAP2 [4]
<6>kxtf9 1-000f: IRQ TAP2 [2]
<6>kxtf9 1-000f: IRQ TAP2 [1]
<6>kxtf9 1-000f: IRQ TAP2 [1]
<6>kxtf9 1-000f: IRQ TAP2 [2]
<3>binder: release proc 2190, transaction 12130, not freed
<6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1325000Calib=1175000 margin=37500
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>binder: 1591:1647 transaction failed 29189, size 100-4
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>sr_class1p5_calib_work: mpu_iva: Calibration complete: Voltage Nominal=1200000Calib=1062500 margin=37500
<6>request_suspend_state: sleep (0->3) at 73045654301 (2013-08-29 01:41:20.383641357 UTC)
<4>[twl4030-usb]Enter twl4030_usb_early_suspend.
<6>ft5x06_suspend() - Driver is suspending.
<6>DSSCOMP: dsscomp_early_suspend
<6>DSSCOMP: blanked screen
<6> boxer : boxer_panel_suspend called , line 269
<6> boxer : boxer_panel_stop called , line 236
<6>Samsung P17 patch already applied to eMMC
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ...
<6>active wake lock PowerManagerService
<4>
<3>Freezing of user space  aborted
<4>
<4>Restarting tasks ... done.
<6>suspend: exit suspend, ret = -16 (2013-08-29 01:42:23.396733399 UTC)
<6>request_suspend_state: wakeup (3->0) at 159377044682 (2013-08-29 01:42:46.715062256 UTC)
<6> boxer : boxer_panel_resume called , line 279
<6> boxer : boxer_panel_start called , line 177
<6> boxer : boxer_panel_start sending SPI data , line 209
<6>Samsung P17 patch already applied to eMMC
<6>DSSCOMP: dsscomp_late_resume
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<6>kxtf9 1-000f: IRQ TILT [20]
<4>[twl4030-usb]Enter twl4030_usb_late_resume.
<6>kxtf9 1-000f: IRQ TAP1 [1]
<6>Samsung P17 patch already applied to eMMC
<6>DMA synchronization event drop occurred with device 33
<3>binder: release proc 2554, transaction 120971, not freed
<3>binder: release proc 2554, transaction 120981, not freed
<3>binder: release proc 2554, transaction 120984, not freed
<6>kxtf9 1-000f: IRQ TAP2 [2]
<6>kxtf9 1-000f: IRQ TILT [1]
<6>request_suspend_state: sleep (0->3) at 251170989994 (2013-08-29 01:44:18.509007568 UTC)
<4>[twl4030-usb]Enter twl4030_usb_early_suspend.
<6>ft5x06_suspend() - Driver is suspending.
<6>DSSCOMP: dsscomp_early_suspend
<6>DSSCOMP: blanked screen
<6> boxer : boxer_panel_suspend called , line 269
<6> boxer : boxer_panel_stop called , line 236
<4>sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=1000000 samples=11
<6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1000000Calib=937500 margin=37500
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>Samsung P17 patch already applied to eMMC
<6>PM: suspend of devices complete after 595.001 msecs
<6>PM: late suspend of devices complete after 0.915 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 3.193 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<6>wakeup wake lock: alarm_rtc
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 462.463 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:23.252476803 UTC)
<6>active wake lock alarm_rtc, time left 60
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 159.057 msecs
<6>PM: late suspend of devices complete after 0.366 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 23.117 seconds
<6>PM: early resume of devices complete after 0.396 msecs
<7>usb usb1: usb resume
<6>wakeup wake lock: alarm_rtc
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 463.134 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:48.263524162 UTC)
<6>active wake lock alarm_rtc, time left 60
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ...
<6>active wake lock alarm, time left 637
<4>
<3>Freezing of user space  aborted
<4>
<4>Restarting tasks ... done.
<6>suspend: exit suspend, ret = -16 (2013-08-29 01:44:48.827122794 UTC)
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 159.210 msecs
<6>active wake lock wl1271_wake
<3>pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
<3>PM: Device power.0 failed to suspend late: error -11
<6>PM: early resume of devices complete after 0.152 msecs
<3>PM: Some devices failed to power down
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 449.340 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = -11 (2013-08-29 01:44:50.305241690 UTC)
<6>active wake lock rx_wake, time left 110
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 165.649 msecs
<6>PM: late suspend of devices complete after 0.976 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 1.911 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: wl1271_wake
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 451.934 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:44:54.721257312 UTC)
<6>active wake lock rx_wake, time left 119
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 150.604 msecs
<6>PM: late suspend of devices complete after 0.671 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 11.769 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 453.582 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:45:09.073826891 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 117
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 173.553 msecs
<6>PM: late suspend of devices complete after 0.976 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 25.361 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: event0-1591
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 450.103 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>request_suspend_state: wakeup (3->0) at 263501708994 (2013-08-29 01:45:36.190678692 UTC)
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:45:36.213292217 UTC)
<6>active wake lock main
<6>active wake lock PowerManagerService.Broadcasts
<6>active wake lock PowerManagerService
<6> boxer : boxer_panel_resume called , line 279
<6> boxer : boxer_panel_start called , line 177
<6> boxer : boxer_panel_start sending SPI data , line 209
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>DSSCOMP: dsscomp_late_resume
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<4>[twl4030-usb]Enter twl4030_usb_late_resume.
<6>kxtf9 1-000f: IRQ TAP2 [10]
<6>kxtf9 1-000f: IRQ TAP1 [2]
<6>kxtf9 1-000f: IRQ TAP2 [1]
<6>request_suspend_state: sleep (0->3) at 293945251474 (2013-08-29 01:46:06.634221172 UTC)
<4>[twl4030-usb]Enter twl4030_usb_early_suspend.
<6>ft5x06_suspend() - Driver is suspending.
<6>DSSCOMP: dsscomp_early_suspend
<6>DSSCOMP: blanked screen
<6> boxer : boxer_panel_suspend called , line 269
<6> boxer : boxer_panel_stop called , line 236
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>Samsung P17 patch already applied to eMMC
<6>PM: suspend of devices complete after 602.722 msecs
<6>PM: late suspend of devices complete after 0.915 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 66.824 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 454.254 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:47:15.031437964 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 117
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.843 msecs
<6>PM: late suspend of devices complete after 0.457 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 22.001 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: event0-1591
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 447.967 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>request_suspend_state: wakeup (3->0) at 297221588146 (2013-08-29 01:47:38.735570040 UTC)
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:47:38.750462618 UTC)
<6>active wake lock main
<6>active wake lock PowerManagerService.Broadcasts
<6>active wake lock PowerManagerService
<6> boxer : boxer_panel_resume called , line 279
<6> boxer : boxer_panel_start called , line 177
<6> boxer : boxer_panel_start sending SPI data , line 209
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>DSSCOMP: dsscomp_late_resume
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<4>[twl4030-usb]Enter twl4030_usb_late_resume.
<6>kxtf9 1-000f: IRQ TAP1 [8]
<6>request_suspend_state: sleep (0->3) at 327665771496 (2013-08-29 01:48:09.179753390 UTC)
<4>[twl4030-usb]Enter twl4030_usb_early_suspend.
<6>ft5x06_suspend() - Driver is suspending.
<6>DSSCOMP: dsscomp_early_suspend
<6>DSSCOMP: blanked screen
<6> boxer : boxer_panel_suspend called , line 269
<6> boxer : boxer_panel_stop called , line 236
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>Samsung P17 patch already applied to eMMC
<6>PM: suspend of devices complete after 582.305 msecs
<6>PM: late suspend of devices complete after 1.190 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 70.430 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 437.316 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:49:21.070775112 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 117
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 159.393 msecs
<6>PM: late suspend of devices complete after 0.488 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 124.257 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 454.467 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:51:27.047001919 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 117
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.843 msecs
<6>PM: late suspend of devices complete after 0.457 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 66.485 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.396 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 444.580 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:52:35.246861535 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock alarm_rtc, time left 62
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.966 msecs
<6>PM: late suspend of devices complete after 0.366 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 39.864 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 452.697 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>request_suspend_state: wakeup (3->0) at 333679168719 (2013-08-29 01:53:16.229405477 UTC)
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:53:16.379368856 UTC)
<6>active wake lock main
<6>active wake lock PowerManagerService.Broadcasts
<6>active wake lock PowerManagerService
<6> boxer : boxer_panel_resume called , line 279
<6> boxer : boxer_panel_start called , line 177
<6> boxer : boxer_panel_start sending SPI data , line 209
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>DSSCOMP: dsscomp_late_resume
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<4>[twl4030-usb]Enter twl4030_usb_late_resume.
<6>request_suspend_state: sleep (0->3) at 364141632099 (2013-08-29 01:53:46.691838339 UTC)
<4>[twl4030-usb]Enter twl4030_usb_early_suspend.
<6>ft5x06_suspend() - Driver is suspending.
<6>DSSCOMP: dsscomp_early_suspend
<6>DSSCOMP: blanked screen
<6> boxer : boxer_panel_suspend called , line 269
<6> boxer : boxer_panel_stop called , line 236
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>Samsung P17 patch already applied to eMMC
<6>PM: suspend of devices complete after 239.562 msecs
<6>PM: late suspend of devices complete after 0.366 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 111.795 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 439.056 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:55:39.509831502 UTC)
<7>hub 1-0:1.0: hub_resume
<6>active wake lock alarm, time left 575
<6>active wake lock rx_wake, time left 120
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 166.473 msecs
<6>PM: late suspend of devices complete after 0.427 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 119.947 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.488 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 454.437 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:41.233922074 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 124
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ...
<6>active wake lock rx_wake, time left 125
<4>
<3>Freezing of user space  aborted
<4>
<4>Restarting tasks ... done.
<6>suspend: exit suspend, ret = -16 (2013-08-29 01:57:42.666417118 UTC)
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 165.740 msecs
<6>PM: late suspend of devices complete after 0.976 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 0.790 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: wl1271_wake
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 439.819 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:45.202458459 UTC)
<6>active wake lock rx_wake, time left 118
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.386 msecs
<6>PM: late suspend of devices complete after 0.671 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 2.371 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: wl1271_wake
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 452.636 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:49.310093957 UTC)
<6>active wake lock rx_wake, time left 119
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 150.726 msecs
<6>PM: late suspend of devices complete after 0.671 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 6.370 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: wl1271_wake
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 454.315 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:57:57.398839068 UTC)
<6>active wake lock rx_wake, time left 119
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.416 msecs
<6>PM: late suspend of devices complete after 0.671 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 8.285 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.366 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 455.047 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:58:07.450566365 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock rx_wake, time left 117
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ...
<6>active wake lock rx_wake, time left 126
<4>
<3>Freezing of tasks  aborted
<4>
<4>Restarting tasks ... done.
<6>suspend: exit suspend, ret = -16 (2013-08-29 01:58:08.699925496 UTC)
<6>active wake lock rx_wake, time left 121
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 165.435 msecs
<6>PM: late suspend of devices complete after 0.976 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 6.996 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: wl1271_wake
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 453.491 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:58:17.474064911 UTC)
<6>active wake lock rx_wake, time left 118
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 158.172 msecs
<6>PM: late suspend of devices complete after 0.671 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 46.026 seconds
<6>wakeup wake lock: alarm
<6>PM: early resume of devices complete after 0.396 msecs
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 458.770 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:05.262944299 UTC)
<6>active wake lock PowerManagerService
<6>active wake lock alarm_rtc, time left 60
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 159.057 msecs
<6>PM: late suspend of devices complete after 0.366 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 1.587 seconds
<6>PM: early resume of devices complete after 0.457 msecs
<7>usb usb1: usb resume
<6>wakeup wake lock: alarm_rtc
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 449.127 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:08.234532431 UTC)
<6>active wake lock alarm_rtc, time left 63
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>PM: Syncing filesystems ... done.
<7>PM: Preparing system for mem sleep
<4>Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<7>PM: Entering mem sleep
<4>config = 0x2214
<4>config = 0x2014
<4>MAX17042 suspend function
<4>max17042: max17042_disable ...
<6>PM: suspend of devices complete after 173.400 msecs
<6>PM: late suspend of devices complete after 0.976 msecs
<6>Successfully put all powerdomains to target state
<6>Suspended for 27.705 seconds
<6>PM: early resume of devices complete after 0.366 msecs
<6>wakeup wake lock: event0-1591
<7>usb usb1: usb resume
<7>hub 1-0:1.0: hub_resume
<6>Samsung P17 patch already applied to eMMC
<4>config = 0x2014
<4>config = 0x2214
<4>MAX17042 resume function
<4>max17042: max17042_enable ...
<6>PM: resume of devices complete after 458.312 msecs
<7>PM: Finishing wakeup.
<4>Restarting tasks ...
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>done.
<7>twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
<7>hub 1-0:1.0: hub_resume
<6>request_suspend_state: wakeup (3->0) at 382676269597 (2013-08-29 01:59:37.100468706 UTC)
<6>suspend: exit suspend, ret = 0 (2013-08-29 01:59:37.128361773 UTC)
<6>active wake lock main
<6>active wake lock PowerManagerService.Broadcasts
<6>active wake lock PowerManagerService
<6> boxer : boxer_panel_resume called , line 279
<6> boxer : boxer_panel_start called , line 177
<6> boxer : boxer_panel_start sending SPI data , line 209
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<6>kxtf9 1-000f: IRQ TILT [20]
<6>kxtf9 1-000f: IRQ TAP2 [2]
<6>DSSCOMP: dsscomp_late_resume
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 46 to reset the Touch Panel...
<4>[twl4030-usb]Enter twl4030_usb_late_resume.
<6>DMA synchronization event drop occurred with device 33
<6>DMA synchronization event drop occurred with device 33
<6>kxtf9 1-000f: IRQ TAP2 [10]
<6>kxtf9 1-000f: IRQ TAP1 [1]
<6>DMA synchronization event drop occurred with device 33
<6>Samsung P17 patch already applied to eMMC
<6>DMA synchronization event drop occurred with device 33