API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 27th, 2012
136
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 38.53 KB | None | 0 0
raw download clone embed print report
  1. +
  2. AR8316 PHY found on MAC0
  3. AR8316 PHY found on MAC1
  4. Ethernet eth0: MAC address 00:15:6d:c1:c8:b9
  5. IP: 192.168.1.20/255.255.255.0, Gateway: 0.0.0.0
  6. Default server: 0.0.0.0
  7.  
  8. RedBoot(tm) bootstrap and debug environment [ROMRAM]
  9. Ubiquiti Networks certified release, version 0.9.00318M.0905121200 - built 12:01:38, May 12 2009
  10.  
  11. Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
  12.  
  13. Board: Ubiquiti RouterStation PRO
  14. Arch: ar7100pro
  15. RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available
  16. Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each
  17. == Executing boot script in 2.000 seconds - enter ^C to abort
  18. RedBoot> fis load -d -e kernel
  19. Trying LZMA decompression...
  20. Image loaded from 0x80060000-0x80303ba0
  21. Image is not ELF, skipping ELF parsing...
  22. RedBoot> exec
  23. Now booting linux kernel:
  24. Base address 0x80050000 Entry 0x80060000
  25. memsize=0x08000000
  26. modetty0=0,n,8,1,hw
  27. board=RouterStation PRO
  28. ethaddr=00.15.6d.c1.c8.b9
  29. [ 0.000000] Linux version 2.6.39.4 (openwrt@OpenWRTBuild) (gcc version 4.5.4 20110808 (prerelease) (Linaro GCC 4.5-2011.08) ) #1 Sun Jan 1 08:47:23 MST 22
  30. [ 0.000000] bootconsole [early0] enabled
  31. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  32. [ 0.000000] SoC: Atheros AR7161 rev 2
  33. [ 0.000000] Clocks: CPU:800.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
  34. [ 0.000000] Determined physical RAM map:
  35. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  36. [ 0.000000] Initrd not found or empty - disabling initrd
  37. [ 0.000000] Zone PFN ranges:
  38. [ 0.000000] Normal 0x00000000 -> 0x00008000
  39. [ 0.000000] Movable zone start PFN for each node
  40. [ 0.000000] early_node_map[1] active PFN ranges
  41. [ 0.000000] 0: 0x00000000 -> 0x00008000
  42. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  43. [ 0.000000] Kernel command line: board=UBNT-RSPRO console=ttyS0,115200 ethaddr=00.15.6d.c1.c8.b9 rootfstype=squashfs,jffs2 noinitrd
  44. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  45. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  46. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  47. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  48. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  49. [ 0.000000] Writing ErrCtl register=00002002
  50. [ 0.000000] Readback ErrCtl register=00002002
  51. [ 0.000000] Memory: 126712k/131072k available (2113k kernel code, 4360k reserved, 401k data, 188k init, 0k highmem)
  52. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  53. [ 0.000000] NR_IRQS:80
  54. [ 0.000000] Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
  55. [ 0.060000] pid_max: default: 32768 minimum: 301
  56. [ 0.060000] Mount-cache hash table entries: 512
  57. [ 0.070000] NET: Registered protocol family 16
  58. [ 0.070000] MIPS: machine is Ubiquiti RouterStation Pro
  59. [ 0.370000] registering PCI controller with io_map_base unset
  60. [ 2.670000] bio: create slab <bio-0> at 0
  61. [ 2.680000] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
  62. [ 2.680000] pci 0000:00:11.0: BAR 0: set to [mem 0x10000000-0x1000ffff] (PCI address [0x10000000-0x1000ffff])
  63. [ 2.690000] PCI: mapping irq 72 to pin1@0000:00:11.0
  64. [ 2.690000] Switching to clocksource MIPS
  65. [ 2.700000] NET: Registered protocol family 2
  66. [ 2.700000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  67. [ 2.700000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  68. [ 2.710000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  69. [ 2.710000] TCP: Hash tables configured (established 4096 bind 4096)
  70. [ 2.720000] TCP reno registered
  71. [ 2.720000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  72. [ 2.730000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  73. [ 2.730000] NET: Registered protocol family 1
  74. [ 2.750000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  75. [ 2.750000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  76. [ 2.760000] msgmni has been set to 247
  77. [ 2.770000] io scheduler noop registered
  78. [ 2.770000] io scheduler deadline registered (default)
  79. [ 2.770000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  80. [ 2.800000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  81. [ 2.810000] console [ttyS0] enabled, bootconsole disabled
  82. [ 2.810000] console [ttyS0] enabled, bootconsole disabled
  83. [ 2.820000] Atheros AR71xx SPI Controller driver version 0.2.4
  84. [ 2.830000] m25p80 spi0.0: found mx25l12805d, expected m25p80
  85. [ 2.830000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  86. [ 2.840000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
  87. [ 2.920000] Searching for RedBoot partition table in spi0.0 at offset 0xff0000
  88. [ 2.990000] 5 RedBoot partitions found on MTD device spi0.0
  89. [ 3.000000] Creating 5 MTD partitions on "spi0.0":
  90. [ 3.000000] 0x000000000000-0x000000030000 : "RedBoot"
  91. [ 3.010000] 0x000000030000-0x000000110000 : "kernel"
  92. [ 3.020000] 0x000000110000-0x000000ff0000 : "rootfs"
  93. [ 3.020000] mtd: partition "rootfs" set to be root filesystem
  94. [ 3.030000] split_squashfs: no squashfs found in "spi0.0"
  95. [ 3.030000] 0x000000ff0000-0x000000fff000 : "FIS directory"
  96. [ 3.040000] 0x000000fff000-0x000001000000 : "RedBoot config"
  97. [ 4.150000] ag71xx_mdio: probed
  98. [ 4.150000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  99. [ 4.670000] eth1: Atheros AG71xx at 0xba000000, irq 5
  100. [ 5.190000] eth1: AR8316 switch driver attached.
  101. [ 5.210000] ar8316: Using port 4 as PHY
  102. [ 6.170000] Atheros AR71xx hardware watchdog driver version 0.1.0
  103. [ 6.170000] TCP westwood registered
  104. [ 6.180000] NET: Registered protocol family 17
  105. [ 6.180000] Bridge firewalling registered
  106. [ 6.180000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  107. [ 6.190000] All bugs added by David S. Miller <davem@redhat.com>
  108. [ 7.740000] JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, .
  109. [ 7.760000] VFS: Mounted root (jffs2 filesystem) readonly on device 31:2.
  110. [ 7.760000] Freeing unused kernel memory: 188k freed
  111.  
  112. [ 11.220000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  113. [ 11.240000] Button Hotplug driver version 0.4.1
  114. - preinit -
  115. Press the [f] key and hit [enter] to enter failsafe mode
  116.  
  117.  
  118. [ 13.670000] eth0: link up (100Mbps/Full duplex)
  119. - regular preinit -
  120. [ 14.120000] SCSI subsystem initialized
  121. [ 14.300000] usbcore: registered new interface driver usbfs
  122. [ 14.300000] usbcore: registered new interface driver hub
  123. [ 14.310000] usbcore: registered new device driver usb
  124. [ 14.790000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  125. [ 14.800000] ar71xx-ehci ar71xx-ehci: Atheros AR71xx built-in EHCI controller
  126. [ 14.810000] ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
  127. [ 14.850000] ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
  128. [ 14.870000] ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
  129. [ 14.870000] hub 1-0:1.0: USB hub found
  130. [ 14.880000] hub 1-0:1.0: 2 ports detected
  131. [ 14.920000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  132. [ 14.920000] ar71xx-ohci ar71xx-ohci: Atheros AR71xx built-in OHCI controller
  133. [ 14.930000] ar71xx-ohci ar71xx-ohci: new USB bus registered, assigned bus number 2
  134. [ 14.940000] ar71xx-ohci ar71xx-ohci: irq 14, io mem 0x1c000000
  135. [ 15.000000] hub 2-0:1.0: USB hub found
  136. [ 15.000000] hub 2-0:1.0: 2 ports detected
  137. [ 15.080000] Initializing USB Mass Storage driver...
  138. [ 15.080000] usbcore: registered new interface driver usb-storage
  139. [ 15.090000] USB Mass Storage support registered.
  140. [ 15.210000] usb 1-1: new high speed USB device number 2 using ar71xx-ehci
  141. [ 15.360000] hub 1-1:1.0: USB hub found
  142. [ 15.360000] hub 1-1:1.0: 4 ports detected
  143. [ 15.490000] usb 1-2: new high speed USB device number 3 using ar71xx-ehci
  144. [ 15.640000] usb-storage 1-2:1.0: Quirks match for vid 05e3 pid 0723: 8000
  145. [ 15.650000] scsi0 : usb-storage 1-2:1.0
  146. [ 15.730000] usb 1-1.1: new high speed USB device number 4 using ar71xx-ehci
  147. [ 15.860000] scsi1 : usb-storage 1-1.1:1.0
  148. [ 15.940000] usb 1-1.2: new low speed USB device number 5 using ar71xx-ehci
  149. [ 16.650000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
  150. [ 16.660000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  151. [ 16.860000] scsi 1:0:0:0: Direct-Access SAMSUNG HD502IJ PQ: 0 ANSI: 2 CCS
  152. [ 16.870000] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  153. [ 16.870000] sd 1:0:0:0: [sdb] Write Protect is off
  154. [ 16.880000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  155. [ 16.890000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  156. [ 16.920000] sdb: sdb1 sdb2 sdb3
  157. [ 16.930000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  158. [ 16.930000] sd 1:0:0:0: [sdb] Attached SCSI disk
  159. - init -
  160. [ 35.200000] eth0: link down
  161.  
  162. Please press Enter to activate this console. [ 35.820000] Compat-wireless backport release: compat-wireless-2011-11-29
  163. [ 35.830000] Backport based on wireless-testing.git master-2011-12-01
  164. [ 36.040000] cfg80211: Calling CRDA to update world regulatory domain
  165. [ 36.130000] cfg80211: World regulatory domain updated:
  166. [ 36.140000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  167. [ 36.140000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  168. [ 36.150000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  169. [ 36.160000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  170. [ 36.170000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  171. [ 36.180000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  172. [ 37.080000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
  173. [ 38.660000] ieee80211 phy0: Atheros AR9160 MAC/BB Rev:1 AR5133 RF Rev:b0 mem=0xb0000000, irq=72
  174. [ 38.670000] cfg80211: Calling CRDA for country: AM
  175. [ 38.690000] cfg80211: Regulatory domain changed to country: AM
  176. [ 38.700000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  177. [ 38.710000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  178. [ 38.710000] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
  179. [ 38.720000] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
  180. [ 39.070000] RPC: Registered udp transport module.
  181. [ 39.080000] RPC: Registered tcp transport module.
  182. [ 39.080000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  183. [ 39.240000] PPP generic driver version 2.4.2
  184. [ 39.300000] tun: Universal TUN/TAP device driver, 1.6
  185. [ 39.300000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  186. [ 39.600000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  187. [ 39.690000] ip_tables: (C) 2000-2006 Netfilter Core Team
  188. [ 39.800000] NET: Registered protocol family 24
  189. [ 40.000000] nf_conntrack version 0.5.0 (1982 buckets, 7928 max)
  190. [ 40.400000] xt_time: kernel timezone is -0000
  191. [ 41.670000] ar71xx: pll_reg 0xb8050010: 0x1099
  192. [ 41.670000] eth0: link up (100Mbps/Full duplex)
  193. [ 41.870000] Adding 2048280k swap on /dev/sdb2. Priority:-1 extents:1 across:2048280k
  194. [ 43.470000] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
  195. [ 45.710000] ar71xx: pll_reg 0xb8050014: 0x110000
  196. [ 45.710000] eth1: link up (1000Mbps/Full duplex)
  197. [ 46.580000] device wlan0 entered promiscuous mode
  198. [ 47.780000] ar71xx-wdt: enabling watchdog timer
  199. [ 48.720000] device eth0.5 entered promiscuous mode
  200. [ 48.730000] device eth0 entered promiscuous mode
  201. [ 51.260000] br-lan: port 2(eth0.5) entering forwarding state
  202. [ 51.270000] br-lan: port 2(eth0.5) entering forwarding state
  203. [ 51.270000] br-lan: port 1(wlan0) entering forwarding state
  204. [ 51.280000] br-lan: port 1(wlan0) entering forwarding state
  205. [ 51.810000] device wlan0 left promiscuous mode
  206. [ 51.810000] br-lan: port 1(wlan0) entering forwarding state
  207. [ 51.970000] device wlan0 entered promiscuous mode
  208. [ 51.970000] br-lan: port 1(wlan0) entering forwarding state
  209. [ 51.980000] br-lan: port 1(wlan0) entering forwarding state
  210. [ 66.320000] br-lan: port 2(eth0.5) entering forwarding state
  211. [ 67.000000] br-lan: port 1(wlan0) entering forwarding state
  212.  
  213.  
  214.  
  215. BusyBox v1.19.3 (2011-12-31 21:23:18 MST) built-in shell (ash)
  216. Enter 'help' for a list of built-in commands.
  217.  
  218. _______ ________ __
  219. | |.-----.-----.-----.| | | |.----.| |_
  220. | - || _ | -__| || | | || _|| _|
  221. |_______|| __|_____|__|__||________||__| |____|
  222. |__| W I R E L E S S F R E E D O M
  223. ATTITUDE ADJUSTMENT (bleeding edge, r29903) ----------
  224. * 1/4 oz Vodka Pour all ingredients into mixing
  225. * 1/4 oz Gin tin with ice, strain into glass.
  226. * 1/4 oz Amaretto
  227. * 1/4 oz Triple sec
  228. * 1/4 oz Peach schnapps
  229. * 1/4 oz Sour mix
  230. * 1 splash Cranberry juice
  231. -----------------------------------------------------
  232. root@levinet-gate:/# swconfig dev eth1 show
  233.  
  234. Global attributes:
  235. enable_vlan: 0
  236. Port 0:
  237. link: port:0 link:down
  238. pvid: 0
  239. Port 1:
  240. link: port:1 link:down
  241. pvid: 0
  242. Port 2:
  243. link: port:2 link:down
  244. pvid: 0
  245. Port 3:
  246. link: port:3 link:down
  247. pvid: 0
  248. Port 4:
  249. link: port:4 link:down
  250. pvid: 0
  251. root@levinet-gate:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!