API tools faq
paste
Advertisement
Guest User

Zsun Automated log

a guest
Jul 1st, 2016
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.89 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.07.01 11:54:10 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. root@OpenWrt:~# df -h
  4. Filesystem Size Used Available Use% Mounted on
  5. rootfs 5.3M 280.0K 5.0M 5% /
  6. /dev/root 9.3M 9.3M 0 100% /rom
  7. tmpfs 29.9M 72.0K 29.8M 0% /tmp
  8. /dev/mtdblock3 5.3M 280.0K 5.0M 5% /overlay
  9. overlayfs:/overlay 5.3M 280.0K 5.0M 5% /
  10. tmpfs 512.0K 0 512.0K 0% /dev
  11. /dev/sda1 29.7G 16.1M 29.7G 0% /mnt/usb
  12. root@OpenWrt:~# ps
  13. PID USER VSZ STAT COMMAND
  14. 1 root 1408 S /sbin/procd
  15. 2 root 0 SW [kthreadd]
  16. 3 root 0 SW [ksoftirqd/0]
  17. 4 root 0 SW [kworker/0:0]
  18. 5 root 0 SW< [kworker/0:0H]
  19. 6 root 0 SW [kworker/u2:0]
  20. 7 root 0 SW< [khelper]
  21. 60 root 0 SW< [writeback]
  22. 61 root 0 SW< [bioset]
  23. 65 root 0 SW< [kblockd]
  24. 66 root 0 SW [kswapd0]
  25. 98 root 0 SW [fsnotify_mark]
  26. 153 root 0 SW [spi0]
  27. 253 root 0 SW< [deferwq]
  28. 254 root 0 SW [kworker/u2:2]
  29. 268 root 0 SW [kworker/0:2]
  30. 312 root 0 SW [scsi_eh_0]
  31. 313 root 0 SW< [scsi_tmf_0]
  32. 314 root 0 SW [usb-storage]
  33. 348 root 0 SW< [kworker/0:1H]
  34. 370 root 0 SWN [jffs2_gcd_mtd3]
  35. 463 root 888 S /sbin/ubusd
  36. 476 root 1368 S /bin/ash --login
  37. 646 root 0 SW< [ipv6_addrconf]
  38. 742 root 0 SW< [cfg80211]
  39. 870 root 1044 S /sbin/logd -S 16
  40. 875 root 1412 S {S17macChanger} /bin/sh /etc/rc.common /etc/rc.d/S17
  41. 883 root 1352 S sleep 39600
  42. 912 root 1504 S /sbin/netifd
  43. 933 root 1160 S /usr/sbin/odhcpd
  44. 983 root 1152 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
  45. 995 http 3944 S /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
  46. 1010 root 1356 S /usr/sbin/telnetd -F -l /bin/login.sh
  47. 1108 root 1360 S /usr/sbin/ntpd -n -S /usr/sbin/ntpd-hotplug -p 0.ope
  48. 1172 root 1632 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/
  49. 1203 nobody 936 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf -k -x /va
  50. 1299 root 1360 R ps
  51. root@OpenWrt:~# ls /bin
  52. ash fsync ping
  53. board_detect grep ping6
  54. box_init_setup.sh gunzip ps
  55. box_installer.sh gzip pwd
  56. box_installer_start.sh ipcalc.sh rm
  57. busybox kill rmdir
  58. cat ln sed
  59. chgrp lock sh
  60. chmod login.sh sleep
  61. chown ls sync
  62. config_generate mkdir tar
  63. cp mknod touch
  64. date mktemp true
  65. dd mount ubus
  66. df mv umount
  67. dmesg netmsg uname
  68. echo netstat vi
  69. egrep nice zcat
  70. false opkg
  71. fgrep pidof
  72. root@OpenWrt:~# cat /etc/rc.local
  73. # Put your custom commands here that should be executed once
  74. # the system init finished. By default this file does nothing.
  75.  
  76. exit 0
  77. root@OpenWrt:~# ls /etc/con
  78. root@OpenWrt:~# ls /etc/config/
  79. dhcp dropbear firewall fstab network system ubootenv wireless
  80. root@OpenWrt:~# ls /etc/ini
  81. root@OpenWrt:~# ls /etc/init.
  82. root@OpenWrt:~# ls /etc/init.d/
  83. autocfg done fstab macChanger piratebox system
  84. boot dropbear led mesh sysctl telnet
  85. cron ext lighttpd network sysfixtime umount
  86. dnsmasq firewall log odhcpd sysntpd
  87. root@OpenWrt:~# ls/ /etc/trc.d
  88. K11mesh K98boot S17macChanger S50dropbear S95done
  89. K20piratebox K99umount S19firewall S50lighttpd S96led
  90. K50dropbear S00sysfixtime S20network S50telnet S98sysntpd
  91. K79ext S10boot S35odhcpd S60dnsmasq
  92. K85odhcpd S10system S40ext S80autocfg
  93. K89log S11sysctl S40fstab S80piratebox
  94. K90network S12log S50cron S89mesh
  95. root@OpenWrt:~# box_ins
  96. root@OpenWrt:~# box_installer_s
  97. root@OpenWrt:~# box_installer_start.sh 
  98. /bin/box_installer_start.sh : Logging install log to USB-Stick
  99. cat: can't open '/var/log/messages': No such file or directory
  100. root@OpenWrt:~# [ 1187.610000] br-lan: port 2(wlan0) entered disabled state
  101. [ 1187.610000] device eth0 left promiscuous mode
  102. [ 1187.620000] br-lan: port 1(eth0) entered disabled state
  103. [ 1187.630000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  104. [ 1187.630000] device wlan0 left promiscuous mode
  105. [ 1187.640000] br-lan: port 2(wlan0) entered disabled state
  106. [ 1191.820000] Removing MTD device #3 (rootfs_data) with use count 1
  107. [ 1191.850000] reboot: Reÿ
  108.  
  109. U-Boot 1.1.4 (May 16 2014 - 17:24:30)
  110.  
  111. AP121 (ar9331) U-boot
  112.  
  113. DRAM: 64 0
  114. 64 MB
  115. Top of RAM usable for U-Boot at: 84000000
  116. Reserving 140k for U-Boot at: 83fdc000
  117. Reserving 192k for malloc() at: 83fac000
  118. Reserving 44 Bytes for Board Info at: 83fabfd4
  119. Reserving 36 Bytes for Global Data at: 83fabfb0
  120. Reserving 128k for boot params() at: 83f8bfb0
  121. Stack Pointer at: 83f8bf98
  122. Now running in RAM - U-Boot at: 83fdc000
  123. Flash Manuf Id 0xef, DeviceId0 0x60, DeviceId1 0x18
  124. flash size 16777216, sector count = 256
  125. Flash: 16 0
  126. 16 MB
  127. Using default environment
  128.  
  129. In: serial
  130. Out: serial
  131. Err: serial
  132. Net: ag7240_enet_initialize...
  133. Fetching MAC Address from 0x83ff4138
  134. Fetching MAC Address from 0x83ff4138
  135. : cfg1 0x5 cfg2 0x7114
  136. eth0: 00:03:7f:11:56:48
  137. eth0 up
  138. : cfg1 0xf cfg2 0x7214
  139. eth1: 00:03:7f:11:56:49
  140. athrs26_reg_init_lan
  141. ATHRS26: resetting s26
  142. ATHRS26: s26 reset done
  143. eth1 up
  144. eth0, eth1
  145. Hit any key to stop autoboot: 1  0
  146. ## Booting image at 9feb0000 ...
  147. Image Name: MIPS OpenWrt Linux-3.18.20
  148. Created: 2016-07-01 16:00:32 UTC
  149. Image Type: MIPS Linux Kernel Image (lzma compressed)
  150. Data Size: 1135574 Bytes = 1 1
  151. 1 MB
  152. .1 MB
  153. Load Address: 80060000
  154. Entry Point: 80060000
  155. Verifying Checksum at 0x9feb0040 ...OK
  156. Uncompressing Kernel Image ... OK
  157. No initrd
  158. ## Transferring control to Linux (at address 80060000) ...
  159. ## Giving linux memsize in bytes, 67108864
  160.  
  161. Starting kernel ...
  162.  
  163. [ 0.000000] Linux version 3.18.20 (user@Lubuntu) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46767) ) #1 Fri Jul 1 11:00:24 CDT 2016
  164. [ 0.000000] bootconsole [early0] enabled
  165. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  166. [ 0.000000] SoC: Atheros AR9330 rev 1
  167. [ 0.000000] Determined physical RAM map:
  168. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  169. [ 0.000000] Initrd not found or empty - disabling initrd
  170. [ 0.000000] Zone ranges:
  171. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  172. [ 0.000000] Movable zone start for each node
  173. [ 0.000000] Early memory node ranges
  174. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  175. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
  176. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  177. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  178. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  179. [ 0.000000] Kernel command line: board=ZSUN-SDREADER console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(u-boot-env)ro,14912k(rootfs),1216k(kernel),64k(nvram),64k(art),16128k@0x20000(firmware) rootfstype=squashfs,jffs2 noinitrd
  180. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  181. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  182. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  183. [ 0.000000] Writing ErrCtl register=00000000
  184. [ 0.000000] Readback ErrCtl register=00000000
  185. [ 0.000000] Memory: 60944K/65536K available (2474K kernel code, 128K rwdata, 528K rodata, 252K init, 188K bss, 4592K reserved)
  186. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  187. [ 0.000000] NR_IRQS:51
  188. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  189. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  190. [ 0.080000] pid_max: default: 32768 minimum: 301
  191. [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  192. [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  193. [ 0.100000] NET: Registered protocol family 16
  194. [ 0.100000] MIPS: machine is ZSUN WiFi SD Card Reader
  195. [ 0.380000] Switched to clocksource MIPS
  196. [ 0.380000] NET: Registered protocol family 2
  197. [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  198. [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  199. [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024)
  200. [ 0.400000] TCP: reno registered
  201. [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  202. [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  203. [ 0.420000] NET: Registered protocol family 1
  204. [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
  205. [ 0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  206. [ 0.450000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  207. [ 0.460000] msgmni has been set to 119
  208. [ 0.470000] io scheduler noop registered
  209. [ 0.470000] io scheduler deadline registered (default)
  210. [ 0.480000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  211. [ 0.480000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
  212. [ 0.490000] console [ttyATH0] enabled
  213. [ 0.490000] console [ttyATH0] enabled
  214. [ 0.500000] bootconsole [early0] disabled
  215. [ 0.500000] bootconsole [early0] disabled
  216. [ 0.510000] m25p80 spi0.0: found w25q128fw, expected m25p80
  217. [ 0.520000] m25p80 spi0.0: w25q128fw (16384 Kbytes)
  218. [ 0.520000] 7 cmdlinepart partitions found on MTD device spi0.0
  219. [ 0.530000] Creating 7 MTD partitions on "spi0.0":
  220. [ 0.530000] 0x000000000000-0x000000010000 : "u-boot"
  221. [ 0.540000] 0x000000010000-0x000000020000 : "u-boot-env"
  222. [ 0.540000] 0x000000020000-0x000000eb0000 : "rootfs"
  223. [ 0.550000] mtd: device 2 (rootfs) set to be root filesystem
  224. [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs
  225. [ 0.560000] 0x000000960000-0x000000eb0000 : "rootfs_data"
  226. [ 0.570000] 0x000000eb0000-0x000000fe0000 : "kernel"
  227. [ 0.570000] 0x000000fe0000-0x000000ff0000 : "nvram"
  228. [ 0.580000] 0x000000ff0000-0x000001000000 : "art"
  229. [ 0.580000] 0x000000020000-0x000000fe0000 : "firmware"
  230. [ 0.600000] libphy: ag71xx_mdio: probed
  231. [ 1.200000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
  232. [ 1.230000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  233. [ 1.230000] TCP: cubic registered
  234. [ 1.240000] NET: Registered protocol family 17
  235. [ 1.240000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  236. [ 1.250000] 8021q: 802.1Q VLAN Support v1.8
  237. [ 1.270000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  238. [ 1.270000] Freeing unused kernel memory: 252K (80371000 - 803b0000)
  239. [ 2.900000] init: Console is alive
  240. [ 2.900000] init: - watchdog -
  241. [ 5.130000] usbcore: registered new interface driver usbfs
  242. [ 5.140000] usbcore: registered new interface driver hub
  243. [ 5.140000] usbcore: registered new device driver usb
  244. [ 5.200000] SCSI subsystem initialized
  245. [ 5.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  246. [ 5.210000] ehci-platform: EHCI generic platform driver
  247. [ 5.220000] ehci-platform ehci-platform: EHCI Host Controller
  248. [ 5.220000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  249. [ 5.230000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  250. [ 5.260000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  251. [ 5.260000] hub 1-0:1.0: USB hub found
  252. [ 5.260000] hub 1-0:1.0: 1 port detected
  253. [ 5.270000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  254. [ 5.280000] ohci-platform: OHCI generic platform driver
  255. [ 5.280000] uhci_hcd: USB Universal Host Controller Interface driver
  256. [ 5.290000] usbcore: registered new interface driver usb-storage
  257. [ 5.590000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  258. [ 5.740000] usb-storage 1-1:1.0: USB Mass Storage device detected
  259. [ 5.750000] scsi host0: usb-storage 1-1:1.0
  260. [ 6.110000] init: - preinit -
  261. [ 6.750000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0
  262. [ 6.770000] random: procd urandom read with 11 bits of entropy available
  263. [ 6.920000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
  264. [ 6.940000] sd 0:0:0:0: [sda] Write Protect is off
  265. [ 6.940000] sd 0:0:0:0: [sda] No Caching mode page found
  266. [ 6.940000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  267. Press the [f] key and hit [enter] to enter fails[ 6.980000] sda: sda1
  268. afe mode
  269. Press the [1], [2], [3] or [4] key and hit [enter][ 6.990000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  270. to select the debug level
  271. [ 10.200000] mount_root: loading kmods from internal overlay
  272. [ 10.600000] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  273. [ 10.620000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  274. [ 10.630000] block: extroot: not configured
  275. [ 10.680000] jffs2: notice: (365) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  276. [ 10.900000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  277. [ 10.910000] block: extroot: not configured
  278. [ 10.910000] mount_root: switching to jffs2 overlay
  279. [ 10.970000] procd: - early -
  280. [ 10.980000] procd: - watchdog -
  281. [ 11.870000] procd: - ubus -
  282. [ 12.890000] procd: - init -
  283. Please press Enter to activate this console.
  284. [ 14.340000] NET: Registered protocol family 10
  285. [ 14.380000] loop: module loaded
  286. [ 14.400000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  287. [ 14.430000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  288. [ 14.440000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  289. [ 14.450000] Backport generated by backports.git backports-20150129-0-gdd4a670
  290. [ 14.460000] ip_tables: (C) 2000-2006 Netfilter Core Team
  291. [ 14.490000] nf_conntrack version 0.5.0 (956 buckets, 3824 max)
  292. [ 14.570000] xt_time: kernel timezone is -0000
  293. [ 14.630000] cfg80211: Calling CRDA to update world regulatory domain
  294. [ 14.630000] cfg80211: World regulatory domain updated:
  295. [ 14.640000] cfg80211: DFS Master region: unset
  296. [ 14.640000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  297. [ 14.650000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  298. [ 14.660000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  299. [ 14.670000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  300. [ 14.680000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  301. [ 14.680000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  302. [ 14.690000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  303. [ 14.700000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  304. [ 14.710000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  305. [ 14.810000] PPP generic driver version 2.4.2
  306. [ 14.810000] NET: Registered protocol family 24
  307. [ 14.960000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  308. [ 14.970000] cfg80211: Calling CRDA for country: US
  309. [ 14.980000] cfg80211: Regulatory domain changed to country: US
  310. [ 14.980000] cfg80211: DFS Master region: FCC
  311. [ 14.990000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  312. [ 15.000000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  313. [ 15.010000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  314. [ 15.020000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  315. [ 15.020000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  316. [ 15.030000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  317. [ 21.540000] random: nonblocking pool is initialized
  318. [ 26.280000] device eth0 entered promiscuous mode
  319. [ 26.280000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  320. [ 28.740000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  321. [ 28.750000] device wlan0 entered promiscuous mode
  322. [ 28.760000] br-lan: port 2(wlan0) entered forwarding state
  323. [ 28.760000] br-lan: port 2(wlan0) entered forwarding state
  324. [ 28.790000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  325. [ 28.790000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  326. [ 30.760000] br-lan: port 2(wlan0) entered forwarding state
  327.  
  328.  
  329.  
  330. BusyBox v1.23.2 (2016-07-01 10:57:07 CDT) built-in shell (ash)
  331.  
  332. _______ ________ __
  333. | |.-----.-----.-----.| | | |.----.| |_
  334. | - || _ | -__| || | | || _|| _|
  335. |_______|| __|_____|__|__||________||__| |____|
  336. |__| W I R E L E S S F R E E D O M
  337. -----------------------------------------------------
  338. CHAOS CALMER (Chaos Calmer, r46767)
  339. -----------------------------------------------------
  340. * 1 1/2 oz Gin Shake with a glassful
  341. * 1/4 oz Triple Sec of broken ice and pour
  342. * 3/4 oz Lime Juice unstrained into a goblet.
  343. * 1 1/2 oz Orange Juice
  344. * 1 tsp. Grenadine Syrup
  345. -----------------------------------------------------
  346. root@OpenWrt:/# box_ins
  347. root@OpenWrt:/# box_installer.sh
  348. Auto installer core script.
  349.  
  350. Use the following parameter to trigger actions
  351. -e : extendRoot init only
  352. -p : install auto package file
  353. -n <step> : resume with step
  354. -o : resume only named step
  355.  
  356. one of -e or -p is required.
  357.  
  358. root@OpenWrt:/#
  359. root@OpenWrt:/# box_installer.sh -e
  360. /bin/box_installer.sh : executing run_test
  361. /bin/box_installer.sh : Testing requirements...
  362. /bin/box_installer.sh : .. USB storage modules available
  363. /bin/box_installer.sh : extendRoot package is installed
  364. /bin/box_installer.sh : Trying to find next step
  365. /bin/box_installer.sh : executing run_signaling_extendRoot_start
  366. /bin/box_installer.sh: line 220: can't create /sys/class/leds/*wlan/trigger: nonexistent directory
  367. /bin/box_installer.sh : Trying to find next step
  368. /bin/box_installer.sh : executing run_prepare_extendRoot
  369. /bin/box_installer.sh : configure initi step for extendRoot
  370. /bin/box_installer.sh : Trying to find next step
  371. /bin/box_installer.sh : executing run_init_extendRoot
  372. /bin/box_installer.sh : not running extendRoot init, because it already is
  373. /bin/box_installer.sh : Trying to find next step
  374. /bin/box_installer.sh : executing run_signaling_extendRoot_stop
  375. /bin/box_installer.sh: line 27: can't create /sys/class/leds/*wlan/trigger: nonexistent directory
  376. /bin/box_installer.sh: line 27: can't create /sys/class/leds/*wlan/brightness: nonexistent directory
  377. /bin/box_installer.sh : Trying to find next step
  378. /bin/box_installer.sh : executing exit
  379. root@OpenWrt:/#
  380. root@OpenWrt:/# box_installer.sh -ep
  381. /bin/box_installer.sh : executing run_test_installation_destination
  382. /bin/box_installer.sh : Testing if installation destination by extendRoot is available.
  383. /bin/box_installer.sh : Something happend to extendRoot filesystem. Printing debug output...
  384. /bin/box_installer.sh : Mount output
  385. /dev/root on /rom type squashfs (ro,relatime)
  386. proc on /proc type proc (rw,noatime)
  387. sysfs on /sys type sysfs (rw,noatime)
  388. tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
  389. /dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
  390. overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
  391. tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
  392. devpts on /dev/pts type devpts (rw,relatime,mode=600)
  393. debugfs on /sys/kernel/debug type debugfs (rw,noatime)
  394. /dev/sda1 on /mnt/usb type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
  395. /bin/box_installer.sh : dmesg | grep sd
  396. [ 6.920000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
  397. [ 6.940000] sd 0:0:0:0: [sda] Write Protect is off
  398. [ 6.940000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  399. [ 6.940000] sd 0:0:0:0: [sda] No Caching mode page found
  400. [ 6.940000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  401. [ 6.980000] sda: sda1
  402. [ 6.990000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  403. [ 14.430000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  404. /bin/box_installer.sh : dmesg | grep loop
  405. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  406. [ 14.380000] loop: module loaded
  407. /bin/box_installer.sh : dmesg | grep ext
  408. [ 10.630000] block: extroot: not configured
  409. [ 10.910000] block: extroot: not configured
  410. /bin/box_installer.sh : Exiting box-installer routine
  411. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!