Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0xf00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
- [ 0.000000] cma: Reserved 8 MiB at 0x2e400000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 192512
- [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map add64000
- [ 0.000000] Normal zone: 1692 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 192512 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @aefb1000 s20416 r8192 d20544 u49152
- [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa01041 bcm2709.serial=0xe8ed4481 smsc95xx.macaddr=B8:27:EB:ED:44:81 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 consoleblank=0
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 744500K/770048K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 17356K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xaf800000 - 0xff000000 (1272 MB)
- lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
- modules : 0x7f000000 - 0x80000000 ( 16 MB)
- .text : 0x80008000 - 0x807945f0 (7730 kB)
- .init : 0x80795000 - 0x80804000 ( 444 kB)
- .data : 0x80804000 - 0x80889b10 ( 535 kB)
- .bss : 0x8088c000 - 0x809497dc ( 758 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:608
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000032] Switching to timer-based delay loop, resolution 52ns
- [ 0.000306] Console: colour dummy device 80x30
- [ 0.000536] console [tty1] enabled
- [ 0.000569] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000594] pid_max: default: 32768 minimum: 301
- [ 0.000952] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000973] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002242] Initializing cgroup subsys blkio
- [ 0.002286] Initializing cgroup subsys memory
- [ 0.002317] Initializing cgroup subsys devices
- [ 0.002342] Initializing cgroup subsys freezer
- [ 0.002384] Initializing cgroup subsys net_cls
- [ 0.002454] CPU: Testing write buffer coherency: ok
- [ 0.002537] ftrace: allocating 20313 entries in 60 pages
- [ 0.051698] CPU0: update cpu_capacity 1024
- [ 0.051734] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
- [ 0.051752] [bcm2709_smp_prepare_cpus] enter
- [ 0.051886] Setting up static identity map for 0x8240 - 0x8274
- [ 0.054388] [bcm2709_boot_secondary] cpu:1 started (0) 18
- [ 0.054827] [bcm2709_secondary_init] enter cpu:1
- [ 0.054885] CPU1: update cpu_capacity 1024
- [ 0.054893] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
- [ 0.055481] [bcm2709_boot_secondary] cpu:2 started (0) 18
- [ 0.055842] [bcm2709_secondary_init] enter cpu:2
- [ 0.055876] CPU2: update cpu_capacity 1024
- [ 0.055884] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
- [ 0.056430] [bcm2709_boot_secondary] cpu:3 started (0) 18
- [ 0.056684] [bcm2709_secondary_init] enter cpu:3
- [ 0.056714] CPU3: update cpu_capacity 1024
- [ 0.056722] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
- [ 0.056819] Brought up 4 CPUs
- [ 0.056848] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.056859] CPU: All CPU(s) started in HYP mode.
- [ 0.056867] CPU: Virtualization extensions available.
- [ 0.057873] devtmpfs: initialized
- [ 0.081746] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.082052] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.083212] pinctrl core: initialized pinctrl subsystem
- [ 0.084000] NET: Registered protocol family 16
- [ 0.089761] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.091020] bcm2709.uart_clock = 3000000
- [ 0.095892] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.095910] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.096108] Serial: AMBA PL011 UART driver
- [ 0.096304] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
- [ 0.096725] console [ttyAMA0] enabled
- [ 0.097297] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.173058] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
- [ 0.173104] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
- [ 0.173798] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
- [ 0.173815] bcm2708-dmaengine 3f007000.dma: dma_debug:0
- [ 0.174545] SCSI subsystem initialized
- [ 0.174793] usbcore: registered new interface driver usbfs
- [ 0.174903] usbcore: registered new interface driver hub
- [ 0.175056] usbcore: registered new device driver usb
- [ 0.175766] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47
- [ 0.203175] Switched to clocksource arch_sys_counter
- [ 0.251970] FS-Cache: Loaded
- [ 0.252374] CacheFiles: Loaded
- [ 0.265479] NET: Registered protocol family 2
- [ 0.266831] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.266974] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.267167] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.267290] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.267355] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.267855] NET: Registered protocol family 1
- [ 0.268320] RPC: Registered named UNIX socket transport module.
- [ 0.268336] RPC: Registered udp transport module.
- [ 0.268347] RPC: Registered tcp transport module.
- [ 0.268357] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.269540] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.270897] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.287159] VFS: Disk quotas dquot_6.6.0
- [ 0.287542] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.290058] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.291240] NFS: Registering the id_resolver key type
- [ 0.291335] Key type id_resolver registered
- [ 0.291348] Key type id_legacy registered
- [ 0.294195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.294402] io scheduler noop registered
- [ 0.294428] io scheduler deadline registered (default)
- [ 0.294758] io scheduler cfq registered
- [ 0.297303] BCM2708FB: allocated DMA memory ee800000
- [ 0.297346] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 0.303120] Console: switching to colour frame buffer device 82x26
- [ 0.306752] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
- [ 0.307970] vc-cma: Videocore CMA driver
- [ 0.307985] vc-cma: vc_cma_base = 0x00000000
- [ 0.307997] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 0.308007] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 0.308241] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- [ 0.324320] brd: module loaded
- [ 0.333377] loop: module loaded
- [ 0.334381] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
- [ 0.336155] Loading iSCSI transport class v2.0-870.
- [ 0.337087] usbcore: registered new interface driver smsc95xx
- [ 0.337163] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 0.537559] Core Release: 2.80a
- [ 0.537580] Setting default values for core params
- [ 0.537624] Finished setting default values for core params
- [ 0.738047] Using Buffer DMA mode
- [ 0.738064] Periodic Transfer Interrupt Enhancement - disabled
- [ 0.738075] Multiprocessor Interrupt Enhancement - disabled
- [ 0.738086] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 0.738104] Dedicated Tx FIFOs mode
- [ 0.738517] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
- [ 0.738556] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- [ 0.738581] dwc_otg: Microframe scheduler enabled
- [ 0.738641] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288
- [ 0.738660] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36
- [ 0.738679] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf89a000
- [ 0.738725] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 0.738774] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 0.738821] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
- [ 0.738876] Init: Port Power? op_state=1
- [ 0.738887] Init: Power Port (0)
- [ 0.739174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.739194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.739209] usb usb1: Product: DWC OTG Controller
- [ 0.739225] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd
- [ 0.739240] usb usb1: SerialNumber: 3f980000.usb
- [ 0.740115] hub 1-0:1.0: USB hub found
- [ 0.740180] hub 1-0:1.0: 1 port detected
- [ 0.740654] dwc_otg: FIQ enabled
- [ 0.740666] dwc_otg: NAK holdoff enabled
- [ 0.740676] dwc_otg: FIQ split-transaction FSM enabled
- [ 0.740716] Module dwc_common_port init
- [ 0.741110] usbcore: registered new interface driver usb-storage
- [ 0.741385] mousedev: PS/2 mouse device common for all mice
- [ 0.742208] bcm2835-cpufreq: min=600000 max=1000000
- [ 0.742576] sdhci: Secure Digital Host Controller Interface driver
- [ 0.742589] sdhci: Copyright(c) Pierre Ossman
- [ 0.742935] sdhost: log_buf @ ae813000 (ee813000)
- [ 0.823222] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 0.843823] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.844425] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.844663] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.844918] usbcore: registered new interface driver usbhid
- [ 0.844930] usbhid: USB HID core driver
- [ 0.845382] Initializing XFRM netlink socket
- [ 0.845422] NET: Registered protocol family 17
- [ 0.845595] Key type dns_resolver registered
- [ 0.846109] Registering SWP/SWPB emulation handler
- [ 0.847060] registered taskstats version 1
- [ 0.847321] vc-sm: Videocore shared memory driver
- [ 0.847341] [vc_sm_connected_init]: start
- [ 0.848076] [vc_sm_connected_init]: end - returning 0
- [ 0.849683] Waiting for root device /dev/mmcblk0p2...
- [ 0.898193] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 0.902071] mmc0: new high speed SDHC card at address 0007
- [ 0.902673] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
- [ 0.904508] mmcblk0: p1 p2
- [ 0.953672] Indeed it is in host mode hprt0 = 00021501
- [ 0.974763] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 0.974834] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 0.976501] devtmpfs: mounted
- [ 0.977232] Freeing unused kernel memory: 444K (80795000 - 80804000)
- [ 1.133247] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.133439] Indeed it is in host mode hprt0 = 00001101
- [ 1.333607] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 1.333636] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.334538] hub 1-1:1.0: USB hub found
- [ 1.334684] hub 1-1:1.0: 5 ports detected
- [ 1.404708] random: systemd urandom read with 43 bits of entropy available
- [ 1.604457] NET: Registered protocol family 10
- [ 1.613256] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 1.713813] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 1.713846] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.717027] smsc95xx v1.0.4
- [ 1.748524] uart-pl011 3f201000.uart: no DMA platform data
- [ 1.777653] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ed:44:81
- [ 1.853232] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
- [ 1.964468] usb 1-1.3: New USB device found, idVendor=0a12, idProduct=0001
- [ 1.964500] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.203258] usb 1-1.4: new low-speed USB device number 5 using dwc_otg
- [ 2.240654] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 2.312484] usb 1-1.4: New USB device found, idVendor=1d57, idProduct=32da
- [ 2.312516] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.312532] usb 1-1.4: Product: 2.4G Receiver
- [ 2.320830] input: 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1D57:32DA.0001/input/input0
- [ 2.373796] hid-generic 0003:1D57:32DA.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Receiver] on usb-3f980000.usb-1.4/input0
- [ 2.379330] input: 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1D57:32DA.0002/input/input1
- [ 2.380068] hid-generic 0003:1D57:32DA.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Receiver] on usb-3f980000.usb-1.4/input1
- [ 2.389281] input: 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:1D57:32DA.0003/input/input2
- [ 2.443725] hid-generic 0003:1D57:32DA.0003: input,hidraw2: USB HID v1.10 Device [2.4G Receiver] on usb-3f980000.usb-1.4/input2
- [ 2.523334] usb 1-1.5: new low-speed USB device number 6 using dwc_otg
- [ 2.551721] fuse init (API version 7.23)
- [ 2.646539] usb 1-1.5: New USB device found, idVendor=0411, idProduct=00c6
- [ 2.646572] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.646589] usb 1-1.5: Product: BUFFALO BGC-FC801 USB Gamepad
- [ 2.646604] usb 1-1.5: Manufacturer: BUFFALO INC.
- [ 2.775792] input: BUFFALO INC. BUFFALO BGC-FC801 USB Gamepad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0411:00C6.0004/input/input3
- [ 2.776397] hid-generic 0003:0411:00C6.0004: input,hidraw3: USB HID v1.10 Joystick [BUFFALO INC. BUFFALO BGC-FC801 USB Gamepad] on usb-3f980000.usb-1.5/input0
- [ 3.198176] systemd-udevd[118]: starting version 215
- [ 4.652179] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- [ 5.060033] Bluetooth: Core ver 2.20
- [ 5.060272] NET: Registered protocol family 31
- [ 5.060290] Bluetooth: HCI device and connection manager initialized
- [ 5.061581] Bluetooth: HCI socket layer initialized
- [ 5.061625] Bluetooth: L2CAP socket layer initialized
- [ 5.061685] Bluetooth: SCO socket layer initialized
- [ 5.199110] usbcore: registered new interface driver btusb
- [ 5.444863] random: nonblocking pool is initialized
- [ 5.504144] bcm2835-rng 3f104000.rng: hwrng registered
- [ 11.782318] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 12.197747] systemd-journald[98]: Received request to flush runtime journal from PID 1
- [ 13.611985] cfg80211: Calling CRDA to update world regulatory domain
- [ 13.823015] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:114688k SSFS
- [ 13.910020] cfg80211: World regulatory domain updated:
- [ 13.910040] cfg80211: DFS Master region: unset
- [ 13.910048] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 13.910059] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 13.910069] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 13.910078] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 13.910089] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 13.910100] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 13.910110] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 13.910119] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 13.910129] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 13.931033] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 13.931051] Bluetooth: BNEP filters: protocol multicast
- [ 13.931072] Bluetooth: BNEP socket layer initialized
- [ 14.025273] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 14.026007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 266.504827] usb 1-1.2: new full-speed USB device number 7 using dwc_otg
- [ 266.669701] usb 1-1.2: New USB device found, idVendor=054c, idProduct=0268
- [ 266.669728] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 266.669745] usb 1-1.2: Product: PLAYSTATION(R)3 Controller
- [ 266.669760] usb 1-1.2: Manufacturer: Sony
- [ 266.776267] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:054C:0268.0005/input/input4
- [ 266.777419] sony 0003:054C:0268.0005: input,hiddev0,hidraw4: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.2/input0
- [ 266.792587] sony 0003:054C:0268.0005: can't set operational mode: step 3
- [ 266.865562] sony: probe of 0003:054C:0268.0005 failed with error -71
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement