by brainuee

exas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)

OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial            +-----------------------------+
Beagle xM Rev C          |                             |
No EEPROM on expansion bo|  Cannot open /dev/ttyUSB0!  |
Die ID #477600229ff800000|                             |
Hit any key to stop autob+-----------------------------+
The user button is currently NOT pressed.
SD/MMC found on device 0
** Can't read from device 0 **

** Unable to use mmc 0:1 for fatload **
** Bad partition 2 **
Booting from nand ...

no devices available
Wrong Image Format for bootm command
ERROR: can't get kernel image!
OMAP3 beagleboard.org #