API tools faq
paste
Guest User

Z-Way log

a guest
Mar 29th, 2014
189
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.14 KB | None | 0 0
raw download clone embed print report
  1. [2014-03-29 16:18:38.566] Adding job: Get controller info and supported function classes
  2. [2014-03-29 16:18:38.595] Adding job: Set Serial API timeouts
  3. [2014-03-29 16:18:38.595] Adding job: WatchDog Start
  4. [2014-03-29 16:18:38.596] Adding job: Get home id and controller node id
  5. [2014-03-29 16:18:38.596] Removing job: Get controller info and supported function classes
  6. [2014-03-29 16:18:38.628] Job 0x06 (Set Serial API timeouts): Old timeouts are: ACK timeout 100 ms and Byte timeout 100 ms
  7. [2014-03-29 16:18:38.628] Removing job: Set Serial API timeouts
  8. [2014-03-29 16:18:38.650] Removing job: WatchDog Start
  9. [2014-03-29 16:18:38.682] Job 0x20 (Get home id and controller node id): Home id: 0xc9a40217, controller node id: 1
  10. [2014-03-29 16:18:38.683] Adding job: Get controller capabilities
  11. [2014-03-29 16:18:38.683] Adding job: Get controller version
  12. [2014-03-29 16:18:38.683] Adding job: Get SUC node id
  13. [2014-03-29 16:18:38.683] Adding job: Get initial data about network devices
  14. [2014-03-29 16:18:38.683] Removing job: Get home id and controller node id
  15. [2014-03-29 16:18:38.715] Removing job: Get controller capabilities
  16. [2014-03-29 16:18:38.750] Removing job: Get controller version
  17. [2014-03-29 16:18:38.783] Job 0x56 (Get SUC node id): No SUC
  18. [2014-03-29 16:18:38.783] Removing job: Get SUC node id
  19. [2014-03-29 16:18:38.839] Adding job: Get node protocol information
  20. [2014-03-29 16:18:38.839] Adding job: Get routing table line
  21. [2014-03-29 16:18:38.840] Adding job: Get node protocol information
  22. [2014-03-29 16:18:38.840] Adding job: Get routing table line
  23. [2014-03-29 16:18:38.841] Adding job: Check if node is failed
  24. [2014-03-29 16:18:38.842] Adding job: Get node protocol information
  25. [2014-03-29 16:18:38.842] Adding job: Get routing table line
  26. [2014-03-29 16:18:38.842] Adding job: Check if node is failed
  27. [2014-03-29 16:18:38.842] Loading configuration data from ./config/zddx/c9a40217-DevicesData.xml
  28. [2014-03-29 16:18:38.977] Node 3:0 CC Basic Interview done
  29. [2014-03-29 16:18:38.978] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  30. [2014-03-29 16:18:38.979] Interview for Node #3 finished.
  31. [2014-03-29 16:18:38.980] Node 3:0 CC SensorBinary Interview done
  32. [2014-03-29 16:18:38.980] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  33. [2014-03-29 16:18:38.981] Interview for Node #3 finished.
  34. [2014-03-29 16:18:38.981] Node 3:0 CC Configuration Interview done
  35. [2014-03-29 16:18:38.982] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  36. [2014-03-29 16:18:38.982] Interview for Node #3 finished.
  37. [2014-03-29 16:18:38.984] Node 3:0 CC ManufacturerSpecific Interview done
  38. [2014-03-29 16:18:38.985] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  39. [2014-03-29 16:18:38.985] Interview for Node #3 finished.
  40. [2014-03-29 16:18:38.986] Node 3:0 CC Battery Interview done
  41. [2014-03-29 16:18:38.987] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  42. [2014-03-29 16:18:38.987] Interview for Node #3 finished.
  43. [2014-03-29 16:18:38.988] Node 3:0 CC Wakeup Interview done
  44. [2014-03-29 16:18:38.989] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  45. [2014-03-29 16:18:38.989] Interview for Node #3 finished.
  46. [2014-03-29 16:18:38.990] Node 3:0 CC Association Interview done
  47. [2014-03-29 16:18:38.991] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  48. [2014-03-29 16:18:38.991] Interview for Node #3 finished.
  49. [2014-03-29 16:18:38.992] Node 3:0 CC Version Interview done
  50. [2014-03-29 16:18:38.993] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  51. [2014-03-29 16:18:38.993] Interview for Node #3 finished.
  52. [2014-03-29 16:18:38.996] Node 5:0 CC Basic Interview done
  53. [2014-03-29 16:18:38.997] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  54. [2014-03-29 16:18:38.997] Interview for Node #5 finished.
  55. [2014-03-29 16:18:38.998] Node 5:0 CC Configuration Interview done
  56. [2014-03-29 16:18:38.999] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  57. [2014-03-29 16:18:38.999] Interview for Node #5 finished.
  58. [2014-03-29 16:18:39.000] Node 5:0 CC ManufacturerSpecific Interview done
  59. [2014-03-29 16:18:39.000] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  60. [2014-03-29 16:18:39.000] Interview for Node #5 finished.
  61. [2014-03-29 16:18:39.001] Node 5:0 CC Association Interview done
  62. [2014-03-29 16:18:39.002] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  63. [2014-03-29 16:18:39.002] Interview for Node #5 finished.
  64. [2014-03-29 16:18:39.003] Node 5:0 CC Version Interview done
  65. [2014-03-29 16:18:39.004] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
  66. [2014-03-29 16:18:39.004] Interview for Node #5 finished.
  67. [2014-03-29 16:18:39.027] Adding job: Set controller node information frame
  68. [2014-03-29 16:18:39.027] Loading Command Classes for device 1
  69. [2014-03-29 16:18:39.029] Node 1:0 supports CC Basic
  70. [2014-03-29 16:18:39.029] Node 1:0 supports CC ApplicationStatus
  71. [2014-03-29 16:18:39.029] Node 1:0 supports CC SwitchMultilevel
  72. [2014-03-29 16:18:39.030] Node 1:0 supports CC SceneActivation
  73. [2014-03-29 16:18:39.030] Node 1:0 supports CC ClimateControlSchedule
  74. [2014-03-29 16:18:39.030] Node 1:0 supports CC MultiChannel
  75. [2014-03-29 16:18:39.031] Node 1:0 supports CC ManufacturerSpecific
  76. [2014-03-29 16:18:39.031] Node 1:0 supports CC NodeNaming
  77. [2014-03-29 16:18:39.031] Node 1:0 supports CC Clock
  78. [2014-03-29 16:18:39.032] Node 1:0 supports CC Version
  79. [2014-03-29 16:18:39.032] Node 1:0 supports CC Time
  80. [2014-03-29 16:18:39.033] Node 1:0 supports CC MultiCmd
  81. [2014-03-29 16:18:39.033] Node 1:0 supports CC Security
  82. [2014-03-29 16:18:39.038] Node 1:1 supports CC Basic
  83. [2014-03-29 16:18:39.038] Node 1:2 supports CC Basic
  84. [2014-03-29 16:18:39.039] Node 1:3 supports CC Basic
  85. [2014-03-29 16:18:39.039] Node 1:4 supports CC Basic
  86. [2014-03-29 16:18:39.039] Node 1:5 supports CC Basic
  87. [2014-03-29 16:18:39.040] Node 1:6 supports CC Basic
  88. [2014-03-29 16:18:39.040] Node 1:7 supports CC Basic
  89. [2014-03-29 16:18:39.040] Node 1:8 supports CC Basic
  90. [2014-03-29 16:18:39.041] Node 1:9 supports CC Basic
  91. [2014-03-29 16:18:39.041] Node 1:10 supports CC Basic
  92. [2014-03-29 16:18:39.041] Node 1:11 supports CC Basic
  93. [2014-03-29 16:18:39.042] Node 1:12 supports CC Basic
  94. [2014-03-29 16:18:39.042] Node 1:13 supports CC Basic
  95. [2014-03-29 16:18:39.042] Node 1:14 supports CC Basic
  96. [2014-03-29 16:18:39.042] Node 1:15 supports CC Basic
  97. [2014-03-29 16:18:39.043] Node 1:16 supports CC Basic
  98. [2014-03-29 16:18:39.043] Node 1:1 supports CC SwitchMultilevel
  99. [2014-03-29 16:18:39.044] Node 1:2 supports CC SwitchMultilevel
  100. [2014-03-29 16:18:39.044] Node 1:3 supports CC SwitchMultilevel
  101. [2014-03-29 16:18:39.044] Node 1:4 supports CC SwitchMultilevel
  102. [2014-03-29 16:18:39.045] Node 1:5 supports CC SwitchMultilevel
  103. [2014-03-29 16:18:39.045] Node 1:6 supports CC SwitchMultilevel
  104. [2014-03-29 16:18:39.046] Node 1:7 supports CC SwitchMultilevel
  105. [2014-03-29 16:18:39.046] Node 1:8 supports CC SwitchMultilevel
  106. [2014-03-29 16:18:39.046] Node 1:9 supports CC SwitchMultilevel
  107. [2014-03-29 16:18:39.047] Node 1:10 supports CC SwitchMultilevel
  108. [2014-03-29 16:18:39.047] Node 1:11 supports CC SwitchMultilevel
  109. [2014-03-29 16:18:39.048] Node 1:12 supports CC SwitchMultilevel
  110. [2014-03-29 16:18:39.048] Node 1:13 supports CC SwitchMultilevel
  111. [2014-03-29 16:18:39.048] Node 1:14 supports CC SwitchMultilevel
  112. [2014-03-29 16:18:39.049] Node 1:15 supports CC SwitchMultilevel
  113. [2014-03-29 16:18:39.049] Node 1:16 supports CC SwitchMultilevel
  114. [2014-03-29 16:18:39.049] Node 1:1 supports CC SceneActivation
  115. [2014-03-29 16:18:39.050] Node 1:2 supports CC SceneActivation
  116. [2014-03-29 16:18:39.050] Node 1:3 supports CC SceneActivation
  117. [2014-03-29 16:18:39.050] Node 1:4 supports CC SceneActivation
  118. [2014-03-29 16:18:39.051] Node 1:5 supports CC SceneActivation
  119. [2014-03-29 16:18:39.051] Node 1:6 supports CC SceneActivation
  120. [2014-03-29 16:18:39.051] Node 1:7 supports CC SceneActivation
  121. [2014-03-29 16:18:39.052] Node 1:8 supports CC SceneActivation
  122. [2014-03-29 16:18:39.052] Node 1:9 supports CC SceneActivation
  123. [2014-03-29 16:18:39.052] Node 1:10 supports CC SceneActivation
  124. [2014-03-29 16:18:39.053] Node 1:11 supports CC SceneActivation
  125. [2014-03-29 16:18:39.053] Node 1:12 supports CC SceneActivation
  126. [2014-03-29 16:18:39.054] Node 1:13 supports CC SceneActivation
  127. [2014-03-29 16:18:39.054] Node 1:14 supports CC SceneActivation
  128. [2014-03-29 16:18:39.054] Node 1:15 supports CC SceneActivation
  129. [2014-03-29 16:18:39.055] Node 1:16 supports CC SceneActivation
  130. [2014-03-29 16:18:39.059] Controller's Command Class 0x22 version is not specified in Defaults.xml
  131. [2014-03-29 16:18:39.059] Removing job: Get initial data about network devices
  132. failed to discover ZWay: Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)
  133. Z-Way version v1.5.0-rc1-1-ga232aeb from 2014-02-13 03:13:44 +0400 (build a232aebd0bd5f8f15345f8f1c95706a263a25f02)
  134. Using default configuration file config.xml
  135. Starting Z-Way for device /dev/ttyAMA0...
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!