evg2000 cfe from dgnd3700 hang on (does not boot)

CFE> f 192.168.1.111:openwrt-96368MVWG-generic-squashfs-cfe(2)
Loading 192.168.1.1.111:openwrt-96368MVWG-generic-squashfs-cfe(2) ...
Loading failed.: CFE error -21
*** command status = -21
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> f 192.168.1.111:openwrt-96368MVWG-generic-squashfs-cfe(2).bin
Loading 192.168.1.111:openwrt-96368MVWG-generic-squashfs-cfe(2).bin ...
Finished loading 2883588 bytes

Flashing root file system and kernel at 0xb8020000: .......................

.
*** Image flash done *** !

Resetting board...

DGND3700 Boot Code V1.0.8
CFE version 1.0.37-104.4 for BCM96368 (32bit,SP,BE)
Build Date: Mon Feb 21 17:59:46 CST 2011 (finerain@moonlight)
Copyright (C) 2000-2009 Broadcom Corporation.

Parallel flash device: name AM29LV320MT, id 0x2201 size 16384KB
Total Flash size: 16384K with 128 sectors
Chip ID: BCM6369B2, MIPS: 400MHz
Main Thread: TP0
Total Memory: 33554432 bytes (32MB)
Boot Address: 0xb8000000

Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-11)                   : 96368MVWG
Number of MAC Addresses (1-32)    : 11
Base MAC Address                  : 20:4e:7f:21:19:8f
PSI Size (1-64) KBytes            : 24
Enable Backup PSI [0|1]           : 0
System Log Size (0-256) KBytes    : 0
Main Thread Number [0|1]          : 0

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xb8020000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80010000