dmesg.3.2.18-nouveau-64M

Linux version 3.2.18-atv (root@lambodara) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 Mon Jun 11 03:14:15 UTC 2012
Disabled fast string operations
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
 BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
 BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000002518000 (usable)
 BIOS-e820: 0000000002518000 - 0000000002569000 (reserved)
 BIOS-e820: 0000000002569000 - 00000000025ae000 (usable)
 BIOS-e820: 000000000dc68000 - 000000000f171000 (usable)
 BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
 BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
 BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
 BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
 BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
 BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
 BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
 BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
 BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: Apple Inc. AppleTV1,1/Mac-F4228DC8, BIOS    ATV11.88Z.00DA.B04.0912220919 12/22/09
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xff00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FFE00000 mask FFFE00000 write-protect
  1 base 000000000 mask FF0000000 write-back
  2 base 00FF00000 mask FFFF00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01800000
Base memory trampoline at [c009e000] 9e000 size 4096
init_memory_mapping: 0000000000000000-000000000ff00000
 0000000000 - 0000400000 page 4k
 0000400000 - 000fc00000 page 2M
 000fc00000 - 000ff00000 page 4k
kernel direct mapping tables up to ff00000 @ 17fb000-1800000
RAMDISK: 01d89000 - 02000000
ACPI: RSDP 000f8000 00024 (v02 APPLE )
ACPI: XSDT 0fefd1c0 00064 (v01 APPLE   Apple00 000000DA      01000013)
ACPI: FACP 0fefb000 000F4 (v03 APPLE   Apple00 000000DA Loki 0000005F)
ACPI: DSDT 0fef4000 02BE5 (v01 APPLE   AppleTV 00010001 INTL 20050309)
ACPI: FACS 0fec0000 00040
ACPI: HPET 0fefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: APIC 0fef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: MCFG 0fef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: ASF! 0fef7000 000A0 (v32 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0fef2000 001A6 (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
ACPI: SSDT 0fef3000 00158 (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
ACPI: SSDT 0fef1000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
255MB LOWMEM available.
  mapped low ram: 0 - 0ff00000
  low ram: 0 - 0ff00000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0000ff00
  HighMem  empty
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
    0: 0x00000010 -> 0x0000008f
    0: 0x00000090 -> 0x000000a0
    0: 0x00000100 -> 0x00002518
    0: 0x00002569 -> 0x000025ae
    0: 0x0000dc68 -> 0x0000f171
    0: 0x0000f372 -> 0x0000febd
    0: 0x0000feef -> 0x0000fef1
    0: 0x0000feff -> 0x0000ff00
On node 0 totalpages: 17731
free_area_init_node: node 0, pgdat c14b1940, node_mem_map cfcbd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 478 pages used for memmap
  Normal zone: 13270 pages, LIFO batch:3
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
nr_irqs_gsi: 40
Allocating PCI resources starting at 10000000 (gap: 10000000:e00f8000)
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 17221
Kernel command line: root=UUID=a1435495-720f-4a52-bb03-4fb9323cc061 ro
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 60744k/261120k available (3591k kernel code, 10180k reserved, 1232k data, 336k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0700000 - 0xff7fe000   ( 752 MB)
    lowmem  : 0xc0000000 - 0xcff00000   ( 255 MB)
      .init : 0xc14b6000 - 0xc150a000   ( 336 kB)
      .data : 0xc1381d0c - 0xc14b5fc0   (1232 kB)
      .text : 0xc1000000 - 0xc1381d0c   (3591 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:2304 nr_irqs:48 16
CPU 0 irqstacks, hard=cf808000 soft=cf80a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1000.044 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.42 BogoMIPS (lpj=3333480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Disabled fast string operations
CPU: Genuine Intel(R) processor              1.00GHz stepping 08
ACPI: Core revision 20110623
Performance Events: p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x10000000-0xfebfffff]
pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101
pci 0000:00:07.0: reg 10: [mem 0x22104000-0x22104fff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0x22100000-0x22103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x2020-0x203f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0x22105000-0x221053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x2058-0x205f]
pci 0000:00:1f.1: reg 14: [io  0x2064-0x2067]
pci 0000:00:1f.1: reg 18: [io  0x2050-0x2057]
pci 0000:00:1f.1: reg 1c: [io  0x2060-0x2063]
pci 0000:00:1f.1: reg 20: [io  0x2040-0x204f]
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
pci 0000:01:00.0: [10de:01d7] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0x21000000-0x21ffffff]
pci 0000:01:00.0: reg 14: [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0x20000000-0x20ffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0x20000000-0x21ffffff]
pci 0000:00:01.0:   bridge window [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
pci 0000:02:03.0: reg 10: [io  0x1000-0x10ff]
pci 0000:02:03.0: reg 14: [mem 0x22000000-0x220000ff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0x22000000-0x220fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x10000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff
reserve RAM buffer: 0000000002518000 - 0000000003ffffff
reserve RAM buffer: 00000000025ae000 - 0000000003ffffff
reserve RAM buffer: 000000000f171000 - 000000000fffffff
reserve RAM buffer: 000000000febd000 - 000000000fffffff
reserve RAM buffer: 000000000fef1000 - 000000000fffffff
reserve RAM buffer: 000000000ff00000 - 000000000fffffff
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x10000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf0000000-0xf3ffffff]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed20000-0xfed8ffff]
system 00:01: [mem 0xf0000000-0xf3ffffff] could not be reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0000-0x001f]
pnp 00:02: [io  0x0081-0x0091]
pnp 00:02: [io  0x0093-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: [io  0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x002e-0x002f]
pnp 00:06: [io  0x004e-0x004f]
pnp 00:06: [io  0x0061]
pnp 00:06: [io  0x0063]
pnp 00:06: [io  0x0065]
pnp 00:06: [io  0x0067]
pnp 00:06: [io  0x0070]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0092]
pnp 00:06: [io  0x00b2-0x00b3]
pnp 00:06: [io  0x0680-0x06ef]
pnp 00:06: [io  0x0800-0x080f]
pnp 00:06: [io  0x0810-0x0817]
pnp 00:06: [io  0x0400-0x047f]
pnp 00:06: [io  0x0500-0x053f]
pnp 00:06: [io  0x1640-0x164f]
pnp 00:06: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1e.0 BAR 7 [io  0x1000-0x1fff]
system 00:06: [io  0x0680-0x06ef] has been reserved
system 00:06: [io  0x0800-0x080f] has been reserved
system 00:06: [io  0x0810-0x0817] has been reserved
system 00:06: [io  0x0400-0x047f] has been reserved
system 00:06: [io  0x0500-0x053f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0070-0x0077]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0x20000000-0x21ffffff]
pci 0000:00:01.0:   bridge window [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0x22000000-0x220fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x10000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0x20000000-0x21ffffff]
pci_bus 0000:01: resource 2 [mem 0x10000000-0x1fffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x22000000-0x220fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x10000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.7: enabling device (0000 -> 0002)
pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.7: PCI INT A disabled
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2524k freed
microcode: CPU0 sig=0x6d8, pf=0x8, revision=0x21
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 123
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.72.22.68
[drm] nouveau 0000:01:00.0: TMDS table version 1.1
[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04021112 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 020321f1 0081c01c
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00001161: type 0x61 idx 1 tag 0x07
[drm] nouveau 0000:01:00.0:   2: 0x00000213: type 0x13 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD0F9
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD3FD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD91A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDA95
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDC0A
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: core 360MHz shader 360MHz memory 720MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: core 360MHz memory 729MHz
[TTM] Zone  kernel: Available graphics memory: 31634 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x49000, bo cef31000
[drm] nouveau 0000:01:00.0: 0xC4F5: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 0)
[drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output C
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 18
ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0x22105000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
cpuidle: using governor ladder
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Using IPI Shortcut mode
rtc_cmos 00:07: setting system clock to 2012-06-11 03:27:37 UTC (1339385257)
Freeing unused kernel memory: 336k freed
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: enabling device (0000 -> 0003)
8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
8139too 0000:02:03.0: setting latency timer to 64
8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xd075c000, 00:17:f2:fb:e5:a7, IRQ 20
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
Refined TSC clocksource calibration: 1000.035 MHz.
Switching to clocksource tsc
usb 2-2: new low-speed USB device number 2 using uhci_hcd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
apple 0003:05AC:8241.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2/input0
usb 1-1.6: new low-speed USB device number 4 using ehci_hcd
input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 1.00 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.6/1-1.6:1.0/input/input0
generic-usb 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 1.00] on usb-0000:00:1d.7-1.6/input0
input: Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 1.00 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.6/1-1.6:1.1/input/input1
generic-usb 0003:045E:008A.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop\xffffffc2\xffffffae\xffffffae 1.00] on usb-0000:00:1d.7-1.6/input1
usb 1-1.7: new high-speed USB device number 5 using ehci_hcd
scsi2 : usb-storage 1-1.7:1.0
scsi 2:0:0:0: Direct-Access     TS8GCF13 3                0407 PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 38 00 00
sd 2:0:0:0: [sda] Asking for cache data failed
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Asking for cache data failed
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Asking for cache data failed
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with ordered data mode
init: ureadahead main process (611) terminated with status 5
Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k
udevd[2959]: starting version 175
ACPI: processor limited to max C-state 2
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Switching to clocksource hpet
EXT3-fs (sda3): using internal journal
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889A: SKU not ready 0x400000f0
HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0
8139too 0000:02:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
init: failsafe main process (3120) killed by TERM signal