API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 24th, 2012
140
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 65.26 KB | None | 0 0
raw download clone embed print report
  1. [    0.187547] FS-Cache: Loaded
  2. [    0.191108] pnp: PnP ACPI init
  3. [    0.191126] ACPI: bus type pnp registered
  4. [    0.191256] pnp 00:00: [bus 00-ff]
  5. [    0.191259] pnp 00:00: [io  0x0cf8-0x0cff]
  6. [    0.191262] pnp 00:00: [io  0x0000-0x0cf7 window]
  7. [    0.191265] pnp 00:00: [io  0x0d00-0xffff window]
  8. [    0.191267] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  9. [    0.191270] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  10. [    0.191272] pnp 00:00: [mem 0xc0000000-0xffffffff window]
  11. [    0.191275] pnp 00:00: [mem 0x00000000-0xffffffff window]
  12. [    0.191382] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  13. [    0.191395] pnp 00:01: [mem 0xfed10000-0xfed19fff]
  14. [    0.191482] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
  15. [    0.191488] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  16. [    0.191519] pnp 00:02: [dma 4]
  17. [    0.191522] pnp 00:02: [io  0x0000-0x000f]
  18. [    0.191524] pnp 00:02: [io  0x0081-0x0083]
  19. [    0.191526] pnp 00:02: [io  0x0087]
  20. [    0.191528] pnp 00:02: [io  0x0089-0x008b]
  21. [    0.191530] pnp 00:02: [io  0x008f]
  22. [    0.191532] pnp 00:02: [io  0x00c0-0x00df]
  23. [    0.191583] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  24. [    0.191596] pnp 00:03: [io  0x0070-0x0071]
  25. [    0.191609] pnp 00:03: [irq 8]
  26. [    0.191658] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  27. [    0.191689] pnp 00:04: [io  0x0060]
  28. [    0.191691] pnp 00:04: [io  0x0064]
  29. [    0.191697] pnp 00:04: [irq 1]
  30. [    0.191749] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  31. [    0.191807] pnp 00:05: [irq 12]
  32. [    0.191861] pnp 00:05: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
  33. [    0.191874] pnp 00:06: [io  0x0061]
  34. [    0.191927] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
  35. [    0.191938] pnp 00:07: [io  0x00f0-0x00ff]
  36. [    0.191944] pnp 00:07: [irq 13]
  37. [    0.191997] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
  38. [    0.192188] pnp 00:08: [io  0x0010-0x001f]
  39. [    0.192190] pnp 00:08: [io  0x0022-0x003f]
  40. [    0.192192] pnp 00:08: [io  0x0044-0x005f]
  41. [    0.192194] pnp 00:08: [io  0x0063]
  42. [    0.192196] pnp 00:08: [io  0x0065]
  43. [    0.192198] pnp 00:08: [io  0x0067-0x006f]
  44. [    0.192200] pnp 00:08: [io  0x0072-0x007f]
  45. [    0.192202] pnp 00:08: [io  0x0080]
  46. [    0.192204] pnp 00:08: [io  0x0084-0x0086]
  47. [    0.192206] pnp 00:08: [io  0x0088]
  48. [    0.192208] pnp 00:08: [io  0x008c-0x008e]
  49. [    0.192210] pnp 00:08: [io  0x0090-0x009f]
  50. [    0.192212] pnp 00:08: [io  0x00a2-0x00bf]
  51. [    0.192215] pnp 00:08: [io  0x00e0-0x00ef]
  52. [    0.192217] pnp 00:08: [io  0x04d0-0x04d1]
  53. [    0.192219] pnp 00:08: [io  0x0800-0x087f]
  54. [    0.192221] pnp 00:08: [io  0x0400-0x041f]
  55. [    0.192223] pnp 00:08: [io  0x0500-0x057f]
  56. [    0.192225] pnp 00:08: [mem 0xf9ffec00-0xf9ffecff window]
  57. [    0.192228] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
  58. [    0.192230] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
  59. [    0.192232] pnp 00:08: [mem 0xfed45000-0xfed89fff]
  60. [    0.192234] pnp 00:08: [mem 0xfed90000-0xfed90fff]
  61. [    0.192237] pnp 00:08: [mem 0xfed91000-0xfed91fff]
  62. [    0.192239] pnp 00:08: [mem 0xfed92000-0xfed92fff]
  63. [    0.192241] pnp 00:08: [mem 0xfed93000-0xfed93fff]
  64. [    0.192243] pnp 00:08: [mem 0xffb00000-0xffbfffff]
  65. [    0.192246] pnp 00:08: [mem 0xfff00000-0xffffffff]
  66. [    0.192351] system 00:08: [io  0x04d0-0x04d1] has been reserved
  67. [    0.192357] system 00:08: [io  0x0800-0x087f] has been reserved
  68. [    0.192362] system 00:08: [io  0x0400-0x041f] has been reserved
  69. [    0.192367] system 00:08: [io  0x0500-0x057f] has been reserved
  70. [    0.192372] system 00:08: [mem 0xf9ffec00-0xf9ffecff window] has been reserved
  71. [    0.192378] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
  72. [    0.192383] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
  73. [    0.192388] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
  74. [    0.192393] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
  75. [    0.192398] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
  76. [    0.192403] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
  77. [    0.192408] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
  78. [    0.192413] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
  79. [    0.192418] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
  80. [    0.192423] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  81. [    0.192483] pnp 00:09: [mem 0xfed00000-0xfed003ff]
  82. [    0.192536] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
  83. [    0.192589] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
  84. [    0.192594] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
  85. [    0.192596] pnp 00:0a: [mem 0xfec10000-0xfec17fff]
  86. [    0.192598] pnp 00:0a: [mem 0xfec18000-0xfec1ffff]
  87. [    0.192601] pnp 00:0a: [mem 0xfec20000-0xfec27fff]
  88. [    0.192603] pnp 00:0a: [mem 0xfec28000-0xfec2ffff]
  89. [    0.192605] pnp 00:0a: [mem 0xfec30000-0xfec37fff]
  90. [    0.192607] pnp 00:0a: [mem 0xfec38000-0xfec3ffff]
  91. [    0.192610] pnp 00:0a: [io  0x0250-0x0253]
  92. [    0.192612] pnp 00:0a: [io  0x0256-0x025f]
  93. [    0.192686] system 00:0a: [io  0x0250-0x0253] has been reserved
  94. [    0.192692] system 00:0a: [io  0x0256-0x025f] has been reserved
  95. [    0.192698] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
  96. [    0.192703] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
  97. [    0.192712] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
  98. [    0.192717] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
  99. [    0.192722] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
  100. [    0.192727] system 00:0a: [mem 0xfec28000-0xfec2ffff] has been reserved
  101. [    0.192732] system 00:0a: [mem 0xfec30000-0xfec37fff] has been reserved
  102. [    0.192737] system 00:0a: [mem 0xfec38000-0xfec3ffff] has been reserved
  103. [    0.192742] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  104. [    0.192802] pnp 00:0b: [mem 0xe0000000-0xefffffff]
  105. [    0.192879] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
  106. [    0.192885] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  107. [    0.197185] pnp 00:0c: [mem 0x00000000-0x0009ffff]
  108. [    0.197188] pnp 00:0c: [mem 0x000c0000-0x000cffff]
  109. [    0.197190] pnp 00:0c: [mem 0x000e0000-0x000fffff]
  110. [    0.197192] pnp 00:0c: [mem 0x00100000-0xbfffffff]
  111. [    0.197195] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
  112. [    0.197285] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
  113. [    0.197292] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
  114. [    0.197297] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
  115. [    0.197302] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
  116. [    0.197308] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
  117. [    0.197450] pnp: PnP ACPI: found 13 devices
  118. [    0.197454] ACPI: ACPI bus type pnp unregistered
  119. [    0.202111] PCI: max bus depth: 1 pci_try_num: 2
  120. [    0.202170] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  121. [    0.202176] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
  122. [    0.202182] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
  123. [    0.202188] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  124. [    0.202195] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  125. [    0.202213] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  126. [    0.202221] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
  127. [    0.202235] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
  128. [    0.202240] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
  129. [    0.202249] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfeafffff]
  130. [    0.202256] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
  131. [    0.202267] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
  132. [    0.202273] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
  133. [    0.202282] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
  134. [    0.202295] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
  135. [    0.202327] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  136. [    0.202334] pci 0000:00:01.0: setting latency timer to 64
  137. [    0.202342] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  138. [    0.202350] pci 0000:00:1c.0: setting latency timer to 64
  139. [    0.202362] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  140. [    0.202369] pci 0000:00:1c.1: setting latency timer to 64
  141. [    0.202380] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  142. [    0.202388] pci 0000:00:1c.2: setting latency timer to 64
  143. [    0.202396] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  144. [    0.202403] pci 0000:00:1c.5: setting latency timer to 64
  145. [    0.202412] pci 0000:00:1e.0: setting latency timer to 64
  146. [    0.202416] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  147. [    0.202419] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  148. [    0.202421] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  149. [    0.202424] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  150. [    0.202426] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
  151. [    0.202429] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
  152. [    0.202431] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
  153. [    0.202434] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  154. [    0.202437] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
  155. [    0.202440] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
  156. [    0.202442] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfeafffff]
  157. [    0.202445] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8ffffff 64bit pref]
  158. [    0.202447] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
  159. [    0.202449] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
  160. [    0.202452] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
  161. [    0.202455] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
  162. [    0.202457] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
  163. [    0.202459] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
  164. [    0.202462] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xffffffff]
  165. [    0.202505] NET: Registered protocol family 2
  166. [    0.202662] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
  167. [    0.206085] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  168. [    0.210120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  169. [    0.210620] TCP: Hash tables configured (established 524288 bind 65536)
  170. [    0.210626] TCP reno registered
  171. [    0.210638] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  172. [    0.210682] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  173. [    0.210836] NET: Registered protocol family 1
  174. [    0.210953] RPC: Registered named UNIX socket transport module.
  175. [    0.210958] RPC: Registered udp transport module.
  176. [    0.210961] RPC: Registered tcp transport module.
  177. [    0.210964] RPC: Registered tcp NFSv4.1 backchannel transport module.
  178. [    0.210988] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
  179. [    0.210990] pci 0000:00:1a.0: Performing full reset
  180. [    0.211028] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
  181. [    0.211030] pci 0000:00:1a.1: Performing full reset
  182. [    0.211050] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
  183. [    0.211052] pci 0000:00:1a.2: Performing full reset
  184. [    0.211122] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
  185. [    0.211124] pci 0000:00:1d.0: Performing full reset
  186. [    0.211144] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
  187. [    0.211146] pci 0000:00:1d.1: Performing full reset
  188. [    0.211165] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
  189. [    0.211167] pci 0000:00:1d.2: Performing full reset
  190. [    0.211228] pci 0000:01:00.0: Boot video device
  191. [    0.211239] PCI: CLS 32 bytes, default 64
  192. [    0.211292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  193. [    0.211297] Placing 64MB software IO TLB between ffff8800bbf9a000 - ffff8800bff9a000
  194. [    0.211302] software IO TLB at phys 0xbbf9a000 - 0xbff9a000
  195. [    0.211316] Simple Boot Flag at 0x51 set to 0x1
  196. [    0.212211] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
  197. [    0.212222] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
  198. [    0.212272] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  199. [    0.212527] audit: initializing netlink socket (disabled)
  200. [    0.212538] type=2000 audit(1327392201.211:1): initialized
  201. [    0.249043] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  202. [    0.252857] VFS: Disk quotas dquot_6.5.2
  203. [    0.252956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  204. [    0.254032] fuse init (API version 7.17)
  205. [    0.254319] msgmni has been set to 7907
  206. [    0.254674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  207. [    0.254696] io scheduler noop registered
  208. [    0.254700] io scheduler deadline registered
  209. [    0.254766] io scheduler cfq registered
  210. [    0.254836] io scheduler bfq registered (default)
  211. [    0.254949] pcieport 0000:00:01.0: setting latency timer to 64
  212. [    0.254984] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  213. [    0.255151] pcieport 0000:00:1c.0: setting latency timer to 64
  214. [    0.255210] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
  215. [    0.255357] pcieport 0000:00:1c.1: setting latency timer to 64
  216. [    0.255416] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
  217. [    0.255574] pcieport 0000:00:1c.2: setting latency timer to 64
  218. [    0.255632] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
  219. [    0.255818] pcieport 0000:00:1c.5: setting latency timer to 64
  220. [    0.255876] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
  221. [    0.256118] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
  222. [    0.256124] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  223. [    0.256130] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
  224. [    0.256154] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  225. [    0.256162] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  226. [    0.256184] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  227. [    0.256189] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  228. [    0.256197] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  229. [    0.256224] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  230. [    0.256232] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  231. [    0.256254] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
  232. [    0.256259] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
  233. [    0.256267] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
  234. [    0.256342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  235. [    0.256427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  236. [    0.269518] Non-volatile memory driver v1.3
  237. [    0.269523] Linux agpgart interface v0.103
  238. [    0.269854] uvesafb: failed to execute /sbin/v86d
  239. [    0.269858] uvesafb: make sure that the v86d helper is installed and executable
  240. [    0.269863] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
  241. [    0.269868] uvesafb: vbe_init() failed with -22
  242. [    0.269873] uvesafb: probe of uvesafb.0 failed with error -22
  243. [    0.269925] vesafb: mode is 1280x720x32, linelength=5120, pages=1
  244. [    0.269930] vesafb: scrolling: redraw
  245. [    0.269934] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  246. [    0.270742] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90011100000, using 7200k, total 14336k
  247. [    0.327200] Console: switching to colour frame buffer device 160x45
  248. [    0.375577] fb0: VESA VGA frame buffer device
  249. [    0.376033] intel_idle: MWAIT substates: 0x3122220
  250. [    0.376035] intel_idle: does not run on family 6 model 23
  251. [    0.376166] ACPI: AC Adapter [AC0] (on-line)
  252. [    0.376673] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
  253. [    0.377430] ACPI: Sleep Button [SLPB]
  254. [    0.377826] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  255. [    0.380484] ACPI: Lid Switch [LID]
  256. [    0.380857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  257. [    0.381602] ACPI: Power Button [PWRF]
  258. [    0.388551] acpi device:21: registered as cooling_device0
  259. [    0.389140] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input3
  260. [    0.390038] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  261. [    0.390681] ACPI: acpi_idle registered with cpuidle
  262. [    0.392456] Monitor-Mwait will be used to enter C-1 state
  263. [    0.392475] Monitor-Mwait will be used to enter C-2 state
  264. [    0.392496] Monitor-Mwait will be used to enter C-3 state
  265. [    0.392503] Marking TSC unstable due to TSC halts in idle
  266. [    0.420840] thermal LNXTHERM:00: registered as thermal_zone0
  267. [    0.437682] ACPI: Thermal Zone [THRM] (68 C)
  268. [    0.454473] [drm] Initialized drm 1.1.0 20060810
  269. [    0.471109] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
  270. [    0.490933] brd: module loaded
  271. [    0.509594] loop: module loaded
  272. [    0.526950] ahci 0000:00:1f.2: version 3.0
  273. [    0.526978] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  274. [    0.544682] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
  275. [    0.544715] ahci: SSS flag set, parallel bus scan disabled
  276. [    0.562315] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
  277. [    0.580203] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
  278. [    0.598187] ahci 0000:00:1f.2: setting latency timer to 64
  279. [    0.600854] scsi0 : ahci
  280. [    0.618685] scsi1 : ahci
  281. [    0.636138] scsi2 : ahci
  282. [    0.653345] scsi3 : ahci
  283. [    0.670567] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 45
  284. [    0.687731] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 45
  285. [    0.704479] ata3: DUMMY
  286. [    0.720899] ata4: DUMMY
  287. [    0.737323] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  288. [    0.753981] e1000: Copyright (c) 1999-2006 Intel Corporation.
  289. [    0.770730] Atheros(R) L2 Ethernet Driver - version 2.2.3
  290. [    0.787499] Copyright (c) 2007 Atheros Corporation.
  291. [    0.804198] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  292. [    0.820888] atl1c 0000:06:00.0: setting latency timer to 64
  293. [    0.833936] ACPI: Battery Slot [BAT0] (battery present)
  294. [    0.891428] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
  295. [    0.907834] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  296. [    0.924480] e100: Copyright(c) 1999-2006 Intel Corporation
  297. [    0.940928] sky2: driver version 1.29
  298. [    0.956978] PPP generic driver version 2.4.2
  299. [    0.972753] PPP Deflate Compression module registered
  300. [    0.988211] PPP BSD Compression module registered
  301. [    1.003518] PPP MPPE Compression module registered
  302. [    1.018479] NET: Registered protocol family 24
  303. [    1.033369] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
  304. [    1.048309] usbcore: registered new interface driver asix
  305. [    1.062753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  306. [    1.062768] usbcore: registered new interface driver cdc_ether
  307. [    1.062800] usbcore: registered new interface driver net1080
  308. [    1.062833] usbcore: registered new interface driver cdc_subset
  309. [    1.062870] usbcore: registered new interface driver zaurus
  310. [    1.062878] cdc_ncm: 04-Aug-2011
  311. [    1.062911] usbcore: registered new interface driver cdc_ncm
  312. [    1.062935] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  313. [    1.062946] ath9k 0000:03:00.0: setting latency timer to 64
  314. [    1.113135] ath: EEPROM regdomain: 0x8283
  315. [    1.113137] ath: EEPROM indicates we should expect a country code
  316. [    1.113140] ath: doing EEPROM country->regdmn map search
  317. [    1.113142] ath: country maps to regdmn code: 0x3
  318. [    1.113143] ath: Country alpha2 being used: RU
  319. [    1.113144] ath: Regpair used: 0x3
  320. [    1.114865] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
  321. [    1.115366] Registered led device: ath9k-phy0
  322. [    1.115371] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000660000, irq=17
  323. [    1.115582] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  324. [    1.115585] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
  325. [    1.115607] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  326. [    1.115623] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  327. [    1.115627] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  328. [    1.115649] drivers/usb/core/inode.c: creating file 'devices'
  329. [    1.115653] drivers/usb/core/inode.c: creating file '001'
  330. [    1.115710] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  331. [    1.115720] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  332. [    1.115724] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  333. [    1.115756] ehci_hcd 0000:00:1a.7: debug port 1
  334. [    1.115762] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  335. [    1.119661] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  336. [    1.119663] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
  337. [    1.119681] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
  338. [    1.119686] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  339. [    1.123565] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  340. [    1.129015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  341. [    1.129041] usb usb1: default language 0x0409
  342. [    1.129048] usb usb1: udev 1, busnum 1, minor = 0
  343. [    1.129050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  344. [    1.129052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  345. [    1.129054] usb usb1: Product: EHCI Host Controller
  346. [    1.129056] usb usb1: Manufacturer: Linux 3.1.7-zen+ ehci_hcd
  347. [    1.129058] usb usb1: SerialNumber: 0000:00:1a.7
  348. [    1.129135] usb usb1: usb_probe_device
  349. [    1.129137] usb usb1: configuration #1 chosen from 1 choice
  350. [    1.129145] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  351. [    1.129201] hub 1-0:1.0: usb_probe_interface
  352. [    1.129203] hub 1-0:1.0: usb_probe_interface - got id
  353. [    1.129205] hub 1-0:1.0: USB hub found
  354. [    1.129210] hub 1-0:1.0: 6 ports detected
  355. [    1.129212] hub 1-0:1.0: standalone hub
  356. [    1.129213] hub 1-0:1.0: no power switching (usb 1.0)
  357. [    1.129215] hub 1-0:1.0: individual port over-current protection
  358. [    1.129217] hub 1-0:1.0: power on to power good time: 20ms
  359. [    1.129221] hub 1-0:1.0: local power source is good
  360. [    1.129223] hub 1-0:1.0: trying to enable port power on non-switchable hub
  361. [    1.129255] drivers/usb/core/inode.c: creating file '001'
  362. [    1.129307] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  363. [    1.129320] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  364. [    1.129324] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  365. [    1.129329] drivers/usb/core/inode.c: creating file '002'
  366. [    1.129391] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  367. [    1.129399] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  368. [    1.129403] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  369. [    1.129432] ehci_hcd 0000:00:1d.7: debug port 1
  370. [    1.129437] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  371. [    1.133335] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  372. [    1.133337] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
  373. [    1.133351] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
  374. [    1.133355] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  375. [    1.137237] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  376. [    1.143015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  377. [    1.143071] usb usb2: default language 0x0409
  378. [    1.143077] usb usb2: udev 1, busnum 2, minor = 128
  379. [    1.143079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  380. [    1.143082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  381. [    1.143084] usb usb2: Product: EHCI Host Controller
  382. [    1.143086] usb usb2: Manufacturer: Linux 3.1.7-zen+ ehci_hcd
  383. [    1.143088] usb usb2: SerialNumber: 0000:00:1d.7
  384. [    1.143165] usb usb2: usb_probe_device
  385. [    1.143167] usb usb2: configuration #1 chosen from 1 choice
  386. [    1.143173] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  387. [    1.143222] hub 2-0:1.0: usb_probe_interface
  388. [    1.143223] hub 2-0:1.0: usb_probe_interface - got id
  389. [    1.143225] hub 2-0:1.0: USB hub found
  390. [    1.143229] hub 2-0:1.0: 6 ports detected
  391. [    1.143231] hub 2-0:1.0: standalone hub
  392. [    1.143233] hub 2-0:1.0: no power switching (usb 1.0)
  393. [    1.143234] hub 2-0:1.0: individual port over-current protection
  394. [    1.143236] hub 2-0:1.0: power on to power good time: 20ms
  395. [    1.143240] hub 2-0:1.0: local power source is good
  396. [    1.143242] hub 2-0:1.0: trying to enable port power on non-switchable hub
  397. [    1.143276] drivers/usb/core/inode.c: creating file '001'
  398. [    1.143352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  399. [    1.143354] ohci_hcd: block sizes: ed 80 td 96
  400. [    1.143398] uhci_hcd: USB Universal Host Controller Interface driver
  401. [    1.143447] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  402. [    1.143456] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  403. [    1.143459] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  404. [    1.143464] drivers/usb/core/inode.c: creating file '003'
  405. [    1.143523] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  406. [    1.143532] uhci_hcd 0000:00:1a.0: detected 2 ports
  407. [    1.143537] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
  408. [    1.143540] uhci_hcd 0000:00:1a.0: Performing full reset
  409. [    1.143556] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
  410. [    1.143570] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
  411. [    1.143609] usb usb3: default language 0x0409
  412. [    1.143615] usb usb3: udev 1, busnum 3, minor = 256
  413. [    1.143617] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  414. [    1.143619] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  415. [    1.143621] usb usb3: Product: UHCI Host Controller
  416. [    1.143623] usb usb3: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  417. [    1.143625] usb usb3: SerialNumber: 0000:00:1a.0
  418. [    1.143702] usb usb3: usb_probe_device
  419. [    1.143704] usb usb3: configuration #1 chosen from 1 choice
  420. [    1.143710] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  421. [    1.143760] hub 3-0:1.0: usb_probe_interface
  422. [    1.143761] hub 3-0:1.0: usb_probe_interface - got id
  423. [    1.143763] hub 3-0:1.0: USB hub found
  424. [    1.143768] hub 3-0:1.0: 2 ports detected
  425. [    1.143769] hub 3-0:1.0: standalone hub
  426. [    1.143771] hub 3-0:1.0: no power switching (usb 1.0)
  427. [    1.143772] hub 3-0:1.0: individual port over-current protection
  428. [    1.143774] hub 3-0:1.0: power on to power good time: 2ms
  429. [    1.143778] hub 3-0:1.0: local power source is good
  430. [    1.143780] hub 3-0:1.0: trying to enable port power on non-switchable hub
  431. [    1.143799] drivers/usb/core/inode.c: creating file '001'
  432. [    1.143829] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
  433. [    1.143855] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  434. [    1.143862] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  435. [    1.143866] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  436. [    1.143874] drivers/usb/core/inode.c: creating file '004'
  437. [    1.143930] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  438. [    1.143938] uhci_hcd 0000:00:1a.1: detected 2 ports
  439. [    1.143943] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
  440. [    1.143945] uhci_hcd 0000:00:1a.1: Performing full reset
  441. [    1.143961] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
  442. [    1.143975] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
  443. [    1.144025] usb usb4: default language 0x0409
  444. [    1.144031] usb usb4: udev 1, busnum 4, minor = 384
  445. [    1.144033] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  446. [    1.144035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  447. [    1.144037] usb usb4: Product: UHCI Host Controller
  448. [    1.144039] usb usb4: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  449. [    1.144041] usb usb4: SerialNumber: 0000:00:1a.1
  450. [    1.144120] usb usb4: usb_probe_device
  451. [    1.144122] usb usb4: configuration #1 chosen from 1 choice
  452. [    1.144128] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  453. [    1.144180] hub 4-0:1.0: usb_probe_interface
  454. [    1.144182] hub 4-0:1.0: usb_probe_interface - got id
  455. [    1.144184] hub 4-0:1.0: USB hub found
  456. [    1.144187] hub 4-0:1.0: 2 ports detected
  457. [    1.144189] hub 4-0:1.0: standalone hub
  458. [    1.144190] hub 4-0:1.0: no power switching (usb 1.0)
  459. [    1.144192] hub 4-0:1.0: individual port over-current protection
  460. [    1.144194] hub 4-0:1.0: power on to power good time: 2ms
  461. [    1.144197] hub 4-0:1.0: local power source is good
  462. [    1.144199] hub 4-0:1.0: trying to enable port power on non-switchable hub
  463. [    1.144215] drivers/usb/core/inode.c: creating file '001'
  464. [    1.144244] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
  465. [    1.144265] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  466. [    1.144272] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  467. [    1.144275] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  468. [    1.144280] drivers/usb/core/inode.c: creating file '005'
  469. [    1.144338] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  470. [    1.144346] uhci_hcd 0000:00:1a.2: detected 2 ports
  471. [    1.144351] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
  472. [    1.144353] uhci_hcd 0000:00:1a.2: Performing full reset
  473. [    1.144369] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
  474. [    1.144385] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
  475. [    1.144422] usb usb5: default language 0x0409
  476. [    1.144428] usb usb5: udev 1, busnum 5, minor = 512
  477. [    1.144430] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  478. [    1.144432] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  479. [    1.144434] usb usb5: Product: UHCI Host Controller
  480. [    1.144436] usb usb5: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  481. [    1.144438] usb usb5: SerialNumber: 0000:00:1a.2
  482. [    1.144511] usb usb5: usb_probe_device
  483. [    1.144513] usb usb5: configuration #1 chosen from 1 choice
  484. [    1.144519] usb usb5: adding 5-0:1.0 (config #1, interface 0)
  485. [    1.144566] hub 5-0:1.0: usb_probe_interface
  486. [    1.144568] hub 5-0:1.0: usb_probe_interface - got id
  487. [    1.144570] hub 5-0:1.0: USB hub found
  488. [    1.144574] hub 5-0:1.0: 2 ports detected
  489. [    1.144576] hub 5-0:1.0: standalone hub
  490. [    1.144577] hub 5-0:1.0: no power switching (usb 1.0)
  491. [    1.144579] hub 5-0:1.0: individual port over-current protection
  492. [    1.144581] hub 5-0:1.0: power on to power good time: 2ms
  493. [    1.144585] hub 5-0:1.0: local power source is good
  494. [    1.144586] hub 5-0:1.0: trying to enable port power on non-switchable hub
  495. [    1.144602] drivers/usb/core/inode.c: creating file '001'
  496. [    1.144634] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
  497. [    1.144655] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  498. [    1.144664] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  499. [    1.144667] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  500. [    1.144672] drivers/usb/core/inode.c: creating file '006'
  501. [    1.144726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  502. [    1.144735] uhci_hcd 0000:00:1d.0: detected 2 ports
  503. [    1.144739] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
  504. [    1.144742] uhci_hcd 0000:00:1d.0: Performing full reset
  505. [    1.144757] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
  506. [    1.144762] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
  507. [    1.144801] usb usb6: default language 0x0409
  508. [    1.144807] usb usb6: udev 1, busnum 6, minor = 640
  509. [    1.144810] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  510. [    1.144812] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  511. [    1.144814] usb usb6: Product: UHCI Host Controller
  512. [    1.144816] usb usb6: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  513. [    1.144818] usb usb6: SerialNumber: 0000:00:1d.0
  514. [    1.144891] usb usb6: usb_probe_device
  515. [    1.144893] usb usb6: configuration #1 chosen from 1 choice
  516. [    1.144899] usb usb6: adding 6-0:1.0 (config #1, interface 0)
  517. [    1.144946] hub 6-0:1.0: usb_probe_interface
  518. [    1.144948] hub 6-0:1.0: usb_probe_interface - got id
  519. [    1.144950] hub 6-0:1.0: USB hub found
  520. [    1.144954] hub 6-0:1.0: 2 ports detected
  521. [    1.144955] hub 6-0:1.0: standalone hub
  522. [    1.144957] hub 6-0:1.0: no power switching (usb 1.0)
  523. [    1.144958] hub 6-0:1.0: individual port over-current protection
  524. [    1.144960] hub 6-0:1.0: power on to power good time: 2ms
  525. [    1.144964] hub 6-0:1.0: local power source is good
  526. [    1.144966] hub 6-0:1.0: trying to enable port power on non-switchable hub
  527. [    1.144981] drivers/usb/core/inode.c: creating file '001'
  528. [    1.145029] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
  529. [    1.145045] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  530. [    1.145052] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  531. [    1.145055] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  532. [    1.145063] drivers/usb/core/inode.c: creating file '007'
  533. [    1.145118] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  534. [    1.145127] uhci_hcd 0000:00:1d.1: detected 2 ports
  535. [    1.145132] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
  536. [    1.145134] uhci_hcd 0000:00:1d.1: Performing full reset
  537. [    1.145150] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
  538. [    1.145154] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
  539. [    1.145191] usb usb7: default language 0x0409
  540. [    1.145198] usb usb7: udev 1, busnum 7, minor = 768
  541. [    1.145200] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  542. [    1.145202] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  543. [    1.145204] usb usb7: Product: UHCI Host Controller
  544. [    1.145206] usb usb7: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  545. [    1.145208] usb usb7: SerialNumber: 0000:00:1d.1
  546. [    1.145289] usb usb7: usb_probe_device
  547. [    1.145292] usb usb7: configuration #1 chosen from 1 choice
  548. [    1.145297] usb usb7: adding 7-0:1.0 (config #1, interface 0)
  549. [    1.145343] hub 7-0:1.0: usb_probe_interface
  550. [    1.145345] hub 7-0:1.0: usb_probe_interface - got id
  551. [    1.145347] hub 7-0:1.0: USB hub found
  552. [    1.145351] hub 7-0:1.0: 2 ports detected
  553. [    1.145352] hub 7-0:1.0: standalone hub
  554. [    1.145354] hub 7-0:1.0: no power switching (usb 1.0)
  555. [    1.145355] hub 7-0:1.0: individual port over-current protection
  556. [    1.145357] hub 7-0:1.0: power on to power good time: 2ms
  557. [    1.145361] hub 7-0:1.0: local power source is good
  558. [    1.145363] hub 7-0:1.0: trying to enable port power on non-switchable hub
  559. [    1.145382] drivers/usb/core/inode.c: creating file '001'
  560. [    1.145415] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
  561. [    1.145431] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  562. [    1.145438] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  563. [    1.145441] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  564. [    1.145446] drivers/usb/core/inode.c: creating file '008'
  565. [    1.145504] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  566. [    1.145512] uhci_hcd 0000:00:1d.2: detected 2 ports
  567. [    1.145517] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
  568. [    1.145519] uhci_hcd 0000:00:1d.2: Performing full reset
  569. [    1.145535] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
  570. [    1.145540] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
  571. [    1.145581] usb usb8: default language 0x0409
  572. [    1.145588] usb usb8: udev 1, busnum 8, minor = 896
  573. [    1.145590] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  574. [    1.145592] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  575. [    1.145594] usb usb8: Product: UHCI Host Controller
  576. [    1.145596] usb usb8: Manufacturer: Linux 3.1.7-zen+ uhci_hcd
  577. [    1.145598] usb usb8: SerialNumber: 0000:00:1d.2
  578. [    1.145673] usb usb8: usb_probe_device
  579. [    1.145675] usb usb8: configuration #1 chosen from 1 choice
  580. [    1.145681] usb usb8: adding 8-0:1.0 (config #1, interface 0)
  581. [    1.145734] hub 8-0:1.0: usb_probe_interface
  582. [    1.145736] hub 8-0:1.0: usb_probe_interface - got id
  583. [    1.145738] hub 8-0:1.0: USB hub found
  584. [    1.145741] hub 8-0:1.0: 2 ports detected
  585. [    1.145743] hub 8-0:1.0: standalone hub
  586. [    1.145745] hub 8-0:1.0: no power switching (usb 1.0)
  587. [    1.145746] hub 8-0:1.0: individual port over-current protection
  588. [    1.145748] hub 8-0:1.0: power on to power good time: 2ms
  589. [    1.145752] hub 8-0:1.0: local power source is good
  590. [    1.145753] hub 8-0:1.0: trying to enable port power on non-switchable hub
  591. [    1.145770] drivers/usb/core/inode.c: creating file '001'
  592. [    1.145802] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
  593. [    1.145898] usbcore: registered new interface driver usblp
  594. [    1.145900] Initializing USB Mass Storage driver...
  595. [    1.145965] usbcore: registered new interface driver usb-storage
  596. [    1.145966] USB Mass Storage support registered.
  597. [    1.146040] usbcore: registered new interface driver libusual
  598. [    1.146154] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  599. [    1.148971] i8042: Detected active multiplexing controller, rev 1.1
  600. [    1.152397] serio: i8042 KBD port at 0x60,0x64 irq 1
  601. [    1.152402] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  602. [    1.152405] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  603. [    1.152407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  604. [    1.152410] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  605. [    1.152581] mousedev: PS/2 mouse device common for all mice
  606. [    1.153080] rtc_cmos 00:03: RTC can wake from S4
  607. [    1.153231] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  608. [    1.153263] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  609. [    1.153354] Linux media interface: v0.10
  610. [    1.153477] lirc_dev: IR Remote Control driver registered, major 250
  611. [    1.153479] IR NEC protocol handler initialized
  612. [    1.153481] IR RC5(x) protocol handler initialized
  613. [    1.153482] IR RC6 protocol handler initialized
  614. [    1.153484] IR JVC protocol handler initialized
  615. [    1.153485] IR Sony protocol handler initialized
  616. [    1.153486] IR RC5 (streamzap) protocol handler initialized
  617. [    1.153488] IR MCE Keyboard/mouse protocol handler initialized
  618. [    1.153489] IR LIRC bridge handler initialized
  619. [    1.153490] Linux video capture interface: v2.00
  620. [    1.153570] usbcore: registered new interface driver uvcvideo
  621. [    1.153571] USB Video Class driver (1.1.1)
  622. [    1.153895] cpuidle: using governor ladder
  623. [    2.204017] usb usb3: suspend_rh (auto-stop)
  624. [    2.204040] usb usb4: suspend_rh (auto-stop)
  625. [    2.204063] usb usb5: suspend_rh (auto-stop)
  626. [    2.204087] usb usb6: suspend_rh (auto-stop)
  627. [    2.204110] usb usb7: suspend_rh (auto-stop)
  628. [    2.891052] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
  629. [    2.891055] hub 2-0:1.0: port 5: status 0501 change 0001
  630. [    2.891079] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
  631. [    2.891082] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  632. [    2.891085] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  633. [    2.891102] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
  634. [    2.891119] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
  635. [    2.891121] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
  636. [    2.891124] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
  637. [    2.891630] cpuidle: using governor menu
  638. [    2.892748] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  639. [    2.916446] EFI Variables Facility v0.08 2004-May-17
  640. [    2.916487] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  641. [    2.929114] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  642. [    2.929549] usbcore: registered new interface driver usbhid
  643. [    2.942397] usbhid: USB HID core driver
  644. [    2.942497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  645. [    2.942785] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
  646. [    2.942787] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
  647. [    2.996323] hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000
  648. [    2.996331] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
  649. [    2.996406] asus_laptop: Asus Laptop Support version 0.42
  650. [    2.996563] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  651. [    2.996873] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  652. [    2.997304] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  653. [    3.024386] ata1.00: configured for UDMA/133
  654. [    3.024556] asus_laptop:   F83VF model detected
  655. [    3.025438] asus_laptop: Backlight controlled by ACPI video driver
  656. [    3.025510] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
  657. [    3.025619] Registered led device: asus::touchpad
  658. [    3.025692] Registered led device: asus::kbd_backlight
  659. [    3.026207] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  660. [    3.026277] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
  661. [    3.026309] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  662. [    3.053764] ehci_hcd 0000:00:1d.7: port 5 high speed
  663. [    3.053768] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  664. [    3.094456] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      0002 PQ: 0 ANSI: 5
  665. [    3.109418] usb 2-5: new high speed USB device number 2 using ehci_hcd
  666. [    3.109708] sd 0:0:0:0: Attached scsi generic sg0 type 0
  667. [    3.109819] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  668. [    3.109866] sd 0:0:0:0: [sda] Write Protect is off
  669. [    3.109868] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  670. [    3.109898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  671. [    3.189146]  sda: sda1 sda2 sda3
  672. [    3.205438] sd 0:0:0:0: [sda] Attached SCSI disk
  673. [    3.230919] ALSA device list:
  674. [    3.246519]   #0: HDA Intel at 0xf9ff8000 irq 46
  675. [    3.262284] Netfilter messages via NETLINK v0.30.
  676. [    3.262514] ehci_hcd 0000:00:1d.7: port 5 high speed
  677. [    3.262518] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  678. [    3.278055] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  679. [    3.294272] ctnetlink v0.93: registering with nfnetlink.
  680. [    3.310722] IPv4 over IPv4 tunneling driver
  681. [    3.327703] ip_tables: (C) 2000-2006 Netfilter Core Team
  682. [    3.344080] TCP cubic registered
  683. [    3.360364] Initializing XFRM netlink socket
  684. [    3.376971] NET: Registered protocol family 10
  685. [    3.394680] ip6_tables: (C) 2000-2006 Netfilter Core Team
  686. [    3.411266] IPv6 over IPv4 tunneling driver
  687. [    3.427702] usb 2-5: skipped 1 descriptor after configuration
  688. [    3.427706] usb 2-5: skipped 6 descriptors after interface
  689. [    3.427709] usb 2-5: skipped 1 descriptor after endpoint
  690. [    3.427711] usb 2-5: skipped 10 descriptors after interface
  691. [    3.427738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  692. [    3.428324] NET: Registered protocol family 17
  693. [    3.428337] Registering the dns_resolver key type
  694. [    3.428522] PM: Hibernation image not present or could not be loaded.
  695. [    3.428536] registered taskstats version 1
  696. [    3.428981]   Magic number: 12:132:69
  697. [    3.510010] usb 2-5: default language 0x0409
  698. [    3.510018] console [netcon0] enabled
  699. [    3.526042] netconsole: network logging started
  700. [    3.527288] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  701. [    3.541847] usb 2-5: udev 2, busnum 2, minor = 129
  702. [    3.541850] usb 2-5: New USB device found, idVendor=064e, idProduct=a116
  703. [    3.559115] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  704. [    3.559120] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  705. [    3.561501] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100
  706. [    3.590246] usb 2-5: Product: USB2.0 UVC 1.3M WebCam
  707. [    3.590248] usb 2-5: Manufacturer: SuYin
  708. [    3.590250] usb 2-5: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
  709. [    3.590454] usb 2-5: usb_probe_device
  710. [    3.590458] usb 2-5: configuration #1 chosen from 1 choice
  711. [    3.593172] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  712. [    3.635949] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
  713. [    3.635956] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  714. [    3.638359] uvcvideo 2-5:1.0: usb_probe_interface
  715. [    3.638363] uvcvideo 2-5:1.0: usb_probe_interface - got id
  716. [    3.638377] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
  717. [    3.638430] ata2.00: configured for UDMA/100
  718. [    3.671401] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     AS02 PQ: 0 ANSI: 5
  719. [    3.687173] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
  720. [    3.703089] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
  721. [    3.703143] drivers/usb/core/inode.c: creating file '002'
  722. [    3.703164] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
  723. [    3.706442] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  724. [    3.722211] cdrom: Uniform CD-ROM driver Revision: 3.20
  725. [    3.738035] sr 1:0:0:0: Attached scsi CD-ROM sr0
  726. [    3.738143] sr 1:0:0:0: Attached scsi generic sg1 type 5
  727. [    4.204106] usb usb8: suspend_rh (auto-stop)
  728. [    4.414570] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
  729. [    4.471841] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
  730. [    4.493502] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  731. [    4.526511] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  732. [    4.607113] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  733. [    4.623171] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
  734. [    4.640939] Freeing unused kernel memory: 648k freed
  735. [    4.657241] Write protecting the kernel read-only data: 10240k
  736. [    4.673761] Freeing unused kernel memory: 36k freed
  737. [    4.695594] Freeing unused kernel memory: 1476k freed
  738. [    4.711940] BFS CPU scheduler v0.415 by Con Kolivas.
  739. [    6.323147] cat used greatest stack depth: 4832 bytes left
  740. [    6.653068] init-early.sh used greatest stack depth: 4368 bytes left
  741. [   10.599764] udevd[4291]: starting version 171
  742. [   12.127360] usb 2-5: link qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  743. [   12.127420] usb 2-5: unlink qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  744. [   13.414953] nvidia: module license 'NVIDIA' taints kernel.
  745. [   13.414957] Disabling lock debugging due to kernel taint
  746. [   13.676323] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  747. [   13.676334] nvidia 0000:01:00.0: setting latency timer to 64
  748. [   13.676340] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  749. [   13.676540] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  290.10  Wed Nov 16 17:39:29 PST 2011
  750. [   13.678526] modprobe used greatest stack depth: 4192 bytes left
  751. [   14.408405] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
  752. [   14.476102] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
  753. [   15.256487] atl1c 0000:06:00.0: irq 47 for MSI/MSI-X
  754. [   15.308913] ADDRCONF(NETDEV_UP): eth0: link is not ready
  755. [   16.357704] EXT4-fs (sda2): re-mounted. Opts: (null)
  756. [   17.943099] ip used greatest stack depth: 3992 bytes left
  757. [   28.020664] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  758. [   30.725689] wlan0: authenticate with 1c:7e:e5:8c:dc:d2 (try 1)
  759. [   30.727696] wlan0: authenticated
  760. [   30.759032] wlan0: associate with 1c:7e:e5:8c:dc:d2 (try 1)
  761. [   30.763428] wlan0: RX AssocResp from 1c:7e:e5:8c:dc:d2 (capab=0x411 status=0 aid=1)
  762. [   30.763434] wlan0: associated
  763. [   30.764123] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  764. [   41.122011] wlan0: no IPv6 routers present
  765. [   58.615594] ata1.00: configured for UDMA/133
  766. [   58.615598] ata1: EH complete
  767. [   59.349468] EXT4-fs (sda2): re-mounted. Opts: commit=0
  768. [   59.353021] EXT4-fs (sda1): re-mounted. Opts: commit=0
  769. [   59.637713] EXT4-fs (sda3): re-mounted. Opts: user_xattr,commit=0
  770. [  128.842061] ehci_hcd 0000:00:1d.7: reused qh ffff880135b6f100 schedule
  771. [  128.842070] usb 2-5: link qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  772. [  128.842109] usb 2-5: unlink qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  773. [  128.973904] ehci_hcd 0000:00:1d.7: reused qh ffff880135b6f100 schedule
  774. [  128.973909] usb 2-5: link qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  775. [  128.973932] usb 2-5: unlink qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  776. [  129.837251] ehci_hcd 0000:00:1d.7: reused qh ffff880135b6f100 schedule
  777. [  129.837256] usb 2-5: link qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  778. [  129.837278] usb 2-5: unlink qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  779. [  129.908556] ehci_hcd 0000:00:1d.7: reused qh ffff880135b6f100 schedule
  780. [  129.908561] usb 2-5: link qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  781. [  129.908583] usb 2-5: unlink qh4-0001/ffff880135b6f100 start 1 [1/0 us]
  782. [  185.395553] nepomukindexer used greatest stack depth: 3768 bytes left
  783. [  828.961558] wlan0: deauthenticating from 1c:7e:e5:8c:dc:d2 by local choice (reason=3)
  784. [  829.011697] cfg80211: Calling CRDA for country: RU
  785. [  833.998042] ata1.00: configured for UDMA/133
  786. [  833.998049] ata1: EH complete
  787. [  834.450768] EXT4-fs (sda2): re-mounted. Opts: commit=0
  788. [  834.588543] EXT4-fs (sda1): re-mounted. Opts: commit=0
  789. [  834.845751] EXT4-fs (sda3): re-mounted. Opts: user_xattr,commit=0
  790. [  838.307802] PM: Syncing filesystems ... done.
  791. [  839.017354] PM: Preparing system for mem sleep
  792. [  839.017991] Freezing user space processes ... (elapsed 0.12 seconds) done.
  793. [  839.139141] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  794. [  839.150150] PM: Entering mem sleep
  795. [  839.150205] Suspending console(s) (use no_console_suspend to debug)
  796. [  839.150628] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  797. [  839.151782] sd 0:0:0:0: [sda] Stopping disk
  798. [  839.197444] hub 8-0:1.0: hub_suspend
  799. [  839.197452] usb usb8: bus suspend
  800. [  839.197455] usb usb8: suspend_rh
  801. [  839.197462] hub 7-0:1.0: hub_suspend
  802. [  839.197467] usb usb7: bus suspend
  803. [  839.197469] usb usb7: suspend_rh
  804. [  839.197478] hub 6-0:1.0: hub_suspend
  805. [  839.197482] usb usb6: bus suspend
  806. [  839.197483] usb usb6: suspend_rh
  807. [  839.197490] hub 5-0:1.0: hub_suspend
  808. [  839.197494] usb usb5: bus suspend
  809. [  839.197496] usb usb5: suspend_rh
  810. [  839.197508] hub 4-0:1.0: hub_suspend
  811. [  839.197512] usb usb4: bus suspend
  812. [  839.197513] usb usb4: suspend_rh
  813. [  839.197525] hub 3-0:1.0: hub_suspend
  814. [  839.197529] usb usb3: bus suspend
  815. [  839.197531] usb usb3: suspend_rh
  816. [  839.197543] hub 2-0:1.0: hub_suspend
  817. [  839.197546] usb usb2: bus suspend
  818. [  839.197549] ehci_hcd 0000:00:1d.7: suspend root hub
  819. [  839.197560] hub 1-0:1.0: hub_suspend
  820. [  839.197563] usb usb1: bus suspend
  821. [  839.197565] ehci_hcd 0000:00:1a.7: suspend root hub
  822. [  839.198104] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
  823. [  839.198119] uhci_hcd 0000:00:1d.2: PCI INT C disabled
  824. [  839.198123] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
  825. [  839.198136] uhci_hcd 0000:00:1d.1: PCI INT B disabled
  826. [  839.198140] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
  827. [  839.198152] uhci_hcd 0000:00:1d.0: PCI INT A disabled
  828. [  839.198276] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
  829. [  839.198301] uhci_hcd 0000:00:1a.2: PCI INT D disabled
  830. [  839.198308] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
  831. [  839.198322] uhci_hcd 0000:00:1a.1: PCI INT B disabled
  832. [  839.198346] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
  833. [  839.198359] uhci_hcd 0000:00:1a.0: PCI INT A disabled
  834. [  839.208031] ehci_hcd 0000:00:1d.7: PCI INT A disabled
  835. [  839.209028] ehci_hcd 0000:00:1a.7: PCI INT C disabled
  836. [  839.400108] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
  837. [  839.562028] PM: suspend of devices complete after 411.514 msecs
  838. [  839.562302] atl1c 0000:06:00.0: PME# enabled
  839. [  839.562311] atl1c 0000:06:00.0: wake-up capability enabled by ACPI
  840. [  839.584177] ehci_hcd 0000:00:1d.7: wakeup: 0
  841. [  839.595017] ehci_hcd 0000:00:1d.7: --> PCI D3hot
  842. [  839.595051] uhci_hcd 0000:00:1d.2: wakeup: 0
  843. [  839.595054] uhci_hcd 0000:00:1d.2: --> PCI D0
  844. [  839.595087] uhci_hcd 0000:00:1d.1: wakeup: 0
  845. [  839.595089] uhci_hcd 0000:00:1d.1: --> PCI D0
  846. [  839.595122] uhci_hcd 0000:00:1d.0: wakeup: 0
  847. [  839.595125] uhci_hcd 0000:00:1d.0: --> PCI D0
  848. [  839.595166] ehci_hcd 0000:00:1a.7: wakeup: 0
  849. [  839.606017] ehci_hcd 0000:00:1a.7: --> PCI D3hot
  850. [  839.606051] uhci_hcd 0000:00:1a.2: wakeup: 0
  851. [  839.606053] uhci_hcd 0000:00:1a.2: --> PCI D0
  852. [  839.606087] uhci_hcd 0000:00:1a.1: wakeup: 0
  853. [  839.606090] uhci_hcd 0000:00:1a.1: --> PCI D0
  854. [  839.606123] uhci_hcd 0000:00:1a.0: wakeup: 0
  855. [  839.606125] uhci_hcd 0000:00:1a.0: --> PCI D0
  856. [  839.606184] PM: late suspend of devices complete after 44.151 msecs
  857. [  839.606436] ACPI: Preparing to enter system sleep state S3
  858. [  839.701098] PM: Saving platform NVS memory
  859. [  839.701348] Disabling non-boot CPUs ...
  860. [  839.702685] CPU 1 is now offline
  861. [  839.703206] Extended CMOS year: 2000
  862. [  839.703206] ACPI: Low-level resume complete
  863. [  839.703206] PM: Restoring platform NVS memory
  864. [  839.703206] CPU0: Thermal monitoring handled by SMI
  865. [  839.703206] Extended CMOS year: 2000
  866. [  839.703206] Enabling non-boot CPUs ...
  867. [  839.703206] Booting Node 0 Processor 1 APIC 0x1
  868. [  839.703206] smpboot cpu 1: start_ip = 99000
  869. [  839.703206] Calibrating delay loop (skipped) already calibrated this CPU
  870. [  839.703206] CPU1: Thermal monitoring handled by SMI
  871. [  839.715016] Switched to NOHz mode on CPU #1
  872. [  839.715055] CPU1 is up
  873. [  839.715887] ACPI: Waking up from system sleep state S3
  874. [  839.843196] pcieport 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
  875. [  839.843205] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  876. [  839.843254] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  877. [  839.843298] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  878. [  839.843341] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  879. [  839.843392] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
  880. [  839.843447] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  881. [  839.843455] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
  882. [  839.843488] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
  883. [  839.843505] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
  884. [  839.843515] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  885. [  839.843522] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
  886. [  839.843576] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
  887. [  839.843592] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
  888. [  839.843602] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  889. [  839.843609] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
  890. [  839.843663] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x20306)
  891. [  839.843679] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x2000d0d0, writing 0xd0d0)
  892. [  839.843689] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  893. [  839.843696] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  894. [  839.843749] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
  895. [  839.843772] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
  896. [  839.843779] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  897. [  839.843847] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  898. [  839.843891] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  899. [  839.843934] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
  900. [  839.843984] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
  901. [  839.844141] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
  902. [  839.844196] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfde80000, writing 0x0)
  903. [  839.844202] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xcc01)
  904. [  839.844207] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xfa000004)
  905. [  839.844212] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
  906. [  839.844217] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc000000)
  907. [  839.844221] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
  908. [  839.844282] ath9k 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
  909. [  839.844310] ath9k 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfdff0004)
  910. [  839.844316] ath9k 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  911. [  839.844325] ath9k 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  912. [  839.844376] atl1c 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
  913. [  839.844406] atl1c 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
  914. [  839.844414] atl1c 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  915. [  839.844598] PM: early resume of devices complete after 1.472 msecs
  916. [  839.844742] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  917. [  839.844750] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  918. [  839.844754] uhci_hcd 0000:00:1a.0: uhci_pci_resume
  919. [  839.844758] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
  920. [  839.844760] uhci_hcd 0000:00:1a.0: Performing full reset
  921. [  839.844784] usb usb3: root hub lost power or was reset
  922. [  839.844790] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  923. [  839.844797] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  924. [  839.844801] uhci_hcd 0000:00:1a.1: uhci_pci_resume
  925. [  839.844805] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  926. [  839.844807] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
  927. [  839.844809] uhci_hcd 0000:00:1a.1: Performing full reset
  928. [  839.844812] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  929. [  839.844833] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  930. [  839.844834] usb usb4: root hub lost power or was reset
  931. [  839.844842] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  932. [  839.844925] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
  933. [  839.844987] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  934. [  839.844997] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  935. [  839.845001] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  936. [  839.845011] uhci_hcd 0000:00:1d.0: uhci_pci_resume
  937. [  839.845015] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
  938. [  839.845017] uhci_hcd 0000:00:1d.0: Performing full reset
  939. [  839.845020] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  940. [  839.845024] uhci_hcd 0000:00:1d.1: uhci_pci_resume
  941. [  839.845028] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
  942. [  839.845030] uhci_hcd 0000:00:1d.1: Performing full reset
  943. [  839.845041] usb usb6: root hub lost power or was reset
  944. [  839.845057] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  945. [  839.845059] usb usb7: root hub lost power or was reset
  946. [  839.845065] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  947. [  839.845069] uhci_hcd 0000:00:1d.2: uhci_pci_resume
  948. [  839.845073] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
  949. [  839.845075] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  950. [  839.845078] uhci_hcd 0000:00:1d.2: Performing full reset
  951. [  839.845085] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  952. [  839.845101] usb usb8: root hub lost power or was reset
  953. [  839.845104] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  954. [  839.845113] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  955. [  839.845116] uhci_hcd 0000:00:1a.2: uhci_pci_resume
  956. [  839.845120] pci 0000:00:1e.0: setting latency timer to 64
  957. [  839.845122] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
  958. [  839.845124] uhci_hcd 0000:00:1a.2: Performing full reset
  959. [  839.845137] ahci 0000:00:1f.2: setting latency timer to 64
  960. [  839.845151] usb usb5: root hub lost power or was reset
  961. [  839.845201] atl1c 0000:06:00.0: wake-up capability disabled by ACPI
  962. [  839.845209] atl1c 0000:06:00.0: PME# disabled
  963. [  839.850825] usb usb1: usb resume
  964. [  839.850831] ehci_hcd 0000:00:1a.7: resume root hub
  965. [  839.850911] usb usb3: usb resume
  966. [  839.850913] usb usb3: wakeup_rh
  967. [  839.851118] usb usb2: usb resume
  968. [  839.851122] ehci_hcd 0000:00:1d.7: resume root hub
  969. [  839.851833] usb usb4: usb resume
  970. [  839.851835] usb usb4: wakeup_rh
  971. [  839.851893] usb usb5: usb resume
  972. [  839.851895] usb usb5: wakeup_rh
  973. [  839.851956] usb usb6: usb resume
  974. [  839.851958] usb usb6: wakeup_rh
  975. [  839.852028] usb usb7: usb resume
  976. [  839.852030] usb usb7: wakeup_rh
  977. [  839.852089] usb usb8: usb resume
  978. [  839.852091] usb usb8: wakeup_rh
  979. [  839.852154] sd 0:0:0:0: [sda] Starting disk
  980. [  839.861728] hub 3-0:1.0: hub_reset_resume
  981. [  839.861731] hub 3-0:1.0: trying to enable port power on non-switchable hub
  982. [  839.863211] hub 4-0:1.0: hub_reset_resume
  983. [  839.863213] hub 4-0:1.0: trying to enable port power on non-switchable hub
  984. [  839.863219] hub 5-0:1.0: hub_reset_resume
  985. [  839.863221] hub 5-0:1.0: trying to enable port power on non-switchable hub
  986. [  839.863226] hub 6-0:1.0: hub_reset_resume
  987. [  839.863228] hub 6-0:1.0: trying to enable port power on non-switchable hub
  988. [  839.863233] hub 7-0:1.0: hub_reset_resume
  989. [  839.863235] hub 7-0:1.0: trying to enable port power on non-switchable hub
  990. [  839.863240] hub 8-0:1.0: hub_reset_resume
  991. [  839.863241] hub 8-0:1.0: trying to enable port power on non-switchable hub
  992. [  839.872022] hub 1-0:1.0: hub_resume
  993. [  839.893038] hub 2-0:1.0: hub_resume
  994. [  839.893057] hub 2-0:1.0: port 5: status 0503 change 0000
  995. [  840.157094] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  996. [  840.226596] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  997. [  840.226835] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  998. [  840.230806] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  999. [  840.231040] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  1000. [  840.232773] ata2.00: configured for UDMA/100
  1001. [  840.954072] usb usb3: suspend_rh (auto-stop)
  1002. [  840.954101] usb usb4: suspend_rh (auto-stop)
  1003. [  840.954126] usb usb5: suspend_rh (auto-stop)
  1004. [  840.954152] usb usb6: suspend_rh (auto-stop)
  1005. [  840.954178] usb usb7: suspend_rh (auto-stop)
  1006. [  840.954203] usb usb8: suspend_rh (auto-stop)
  1007. [  842.551137] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1008. [  842.552966] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  1009. [  842.637591] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1010. [  842.637994] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  1011. [  842.642131] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  1012. [  842.687830] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1013. [  842.688182] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
  1014. [  842.721588] ata1.00: configured for UDMA/133
  1015. [  842.754506] PM: resume of devices complete after 2909.827 msecs
  1016. [  842.754741] PM: Finishing wakeup.
  1017. [  842.754743] Restarting tasks ...
  1018. [  842.754787] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
  1019. [  842.754792] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
  1020. [  842.754795] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1021. [  842.754799] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1022. [  842.754802] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1023. [  842.754805] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1024. [  842.754808] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1025. [  842.754811] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1026. [  842.764389] done.
  1027. [  842.764395] video LNXVIDEO:00: Restoring backlight state
  1028. [  843.434071] ata1.00: configured for UDMA/133
  1029. [  843.434075] ata1: EH complete
  1030. [  844.151295] EXT4-fs (sda2): re-mounted. Opts: commit=0
  1031. [  844.245669] EXT4-fs (sda1): re-mounted. Opts: commit=0
  1032. [  844.621887] EXT4-fs (sda3): re-mounted. Opts: user_xattr,commit=0
  1033. [  844.728127] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1034. [  844.733051] atl1c 0000:06:00.0: irq 47 for MSI/MSI-X
  1035. [  844.785947] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1036. [  846.976778] wlan0: authenticate with 1c:7e:e5:8c:dc:d2 (try 1)
  1037. [  846.978790] wlan0: authenticated
  1038. [  846.997392] wlan0: associate with 1c:7e:e5:8c:dc:d2 (try 1)
  1039. [  847.000334] wlan0: RX AssocResp from 1c:7e:e5:8c:dc:d2 (capab=0x411 status=0 aid=1)
  1040. [  847.000337] wlan0: associated
  1041. [  847.000962] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1042. [  857.890025] wlan0: no IPv6 routers present
  1043. [ 1083.968117] nepomukindexer[10605]: segfault at 7fff84000000 ip 00007f5228f04d40 sp 00007fff86739f60 error 4 in libc-2.14.1.so[7f5228e84000+1a0000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!