Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Autoboot (0 seconds) in progress, press any key to stop
- get_debug_level current debug level is 0x574f4c44.
- get_debug_level current debug level is 0x574f4c44.
- boot_kernel: Debug Level Low
- Load Partion idx = (6)
- Loading Partion idx = (6)
- ..............................done
- Kernel read success from kernel partition no.6, idx.6.
- setting param.serialnr=0x393049b7 0x742500ec
- setting param.board_rev=0xc
- setting param.cmdline=console=ttySAC2,115200 loglevel=4
- Starting kernel at 0x32000000...
- <6>S5PV210: Initializing architecture
- <6>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
- <6>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
- <6>s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
- <6>s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
- <6>print_constraints: pd_audio_supply: 5000 mV normal
- <6>print_constraints: pd_cam_supply: 5000 mV normal
- <6>print_constraints: pd_tv_supply: 5000 mV normal
- <6>print_constraints: pd_lcd_supply: 5000 mV normal
- <6>print_constraints: pd_g3d_supply: 5000 mV normal
- <6>print_constraints: pd_mfc_supply: 5000 mV normal
- <6>bio: create slab <bio-0> at 0
- <5>SCSI subsystem initialized
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>i2c-gpio i2c-gpio.4: using pins 248 (SDA) and 247 (SCL)
- <6>i2c-gpio i2c-gpio.5: using pins 42 (SDA) and 43 (SCL)
- <3>max8998 6-0066: No interrupt base specified, no interrupts
- <3>i2:10, buck2_idx:0
- <6>print_constraints: VALIVE_1.2V: 1200 mV
- <6>print_constraints: VUSB_1.1V: 1100 mV
- <6>print_constraints: VADC_3.3V: 3300 mV
- <6>print_constraints: CAM_SENSOR_CORE_1.8V: 1800 mV
- <6>print_constraints: VLCD_1.8V: 1800 mV
- <6>print_constraints: VUSB_3.3V: 3300 mV
- <6>print_constraints: VCC_2.8V_PDA: 2800 mV
- <6>print_constraints: CAM_AF_3.0V: 3000 mV
- <6>print_constraints: CAM_SENSOR_CORE_1.2V: 1200 mV
- <6>print_constraints: VGA_VDDIO_2.8V: 2800 mV
- <6>print_constraints: VGA_DVDD_1.8V: 1800 mV
- <6>print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
- <6>print_constraints: VCC_3.0V_LCD: 3000 mV
- <6>print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
- <6>print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
- <6>print_constraints: VCC_1.8V: 1800 mV
- <6>print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
- <6>print_constraints: ESAFEOUT2:
- <3>i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16)
- <3>i2c i2c-6: Can't create device at 0x06
- <6>i2c-gpio i2c-gpio.6: using pins 204 (SDA) and 203 (SCL)
- <6>i2c-gpio i2c-gpio.9: using pins 237 (SDA) and 235 (SCL)
- <6>i2c-gpio i2c-gpio.11: using pins 202 (SDA) and 201 (SCL)
- <6>print_constraints: VDDA & SDRAM & WIMAX_USB & RFC1C4_1.8V: 1800 mV
- <6>print_constraints: WIMAX_2.9V: 2900 mV
- <6>print_constraints: TOUCH_KEY_3.0V: 3000 mV
- <6>print_constraints: VCC_MOTOR_3.0V: 3000 mV
- <6>print_constraints: WIMAX_SDIO_3.0V: 3000 mV
- <6>print_constraints: VDD_RF & IO_1.8V: 1800 mV
- <6>max8893 12-003e: Maxim 8893 regulator driver loaded
- <6>i2c-gpio i2c-gpio.12: using pins 25 (SDA) and 27 (SCL)
- <6>i2c-gpio i2c-gpio.10: using pins 120 (SDA) and 122 (SCL)
- <6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- <6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- <6>s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
- <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>Bluetooth: Core ver 2.16
- <6>NET: Registered protocol family 31
- <6>Bluetooth: HCI device and connection manager initialized
- <6>Bluetooth: HCI socket layer initialized
- <6>Bluetooth: L2CAP socket layer initialized
- <6>Bluetooth: SCO socket layer initialized
- <6>Switching to clocksource clock_source_systimer
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>Switched to NOHz mode on CPU #0
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>TCP: Hash tables configured (established 16384 bind 16384)
- <6>TCP reno registered
- <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>NET: Registered protocol family 1
- <6>PMU: registered new PMU device of type 0
- <4>clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
- <6>wake enabled for irq 36
- <6>wake disabled for irq 36
- <6>S5PV210 ADC driver, (c) 2010 Samsung Electronics
- <6>Loaded driver for PL330 DMAC-0 s3c-pl330
- <6> DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
- <6>Loaded driver for PL330 DMAC-1 s3c-pl330
- <6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- <6>Loaded driver for PL330 DMAC-2 s3c-pl330
- <6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- <6>ashmem: initialized
- <6>ROMFS MTD (C) 2007 Red Hat, Inc.
- <6>fuse init (API version 7.16)
- <7>yaffs: yaffs built Aug 19 2013 20:47:57 Installing.
- <6>msgmni has been set to 735
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler row registered (default)
- <6>io scheduler cfq registered
- <6>io scheduler sio registered
- MDNIE INIT ..........
- <6>S3C MDNIE Driver, (c) 2010 Samsung Electronics
- MDNIE INIT SUCCESS Addr : 0xe8034000
- IELCD INIT ..........
- <6>S3C IELCD Driver, (c) 2010 Samsung Electronics
- IELCD INIT SUCCESS Addr : 0xe8040000
- <6>s3cfb s3cfb: [fb2] dma: 0x50065000, cpu: 0xe9000000, size: 0x00a41000
- <6>FIMD src sclk = 166750000
- <6>s3cfb s3cfb: pixclock adjusted from 39019 to 41979
- <4>s3cfb s3cfb: closing bootloader FIMD window 0
- <6>s3cfb s3cfb: registered successfully
- <6>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
- <6>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
- <6>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
- PA FB = 0x50065000, bits per pixel = 32
- screen width=480 height=800 va=0xe0065000 pa=0x50065000
- xres_virtual = 480, yres_virtual = 5600, xoffset = 0, yoffset = 0
- fb_size=10752000
- Back frameBuffer[0].VAddr=e01dc000 PAddr=501dc000 size=1536000
- Back frameBuffer[1].VAddr=e0353000 PAddr=50353000 size=1536000
- Video Y Buffer[0].VAddr=e04ca000 PAddr=504ca000 size=921600
- Video Y Buffer[1].VAddr=e05ab000 PAddr=505ab000 size=921600
- Video Y Buffer[2].VAddr=e068c000 PAddr=5068c000 size=921600
- Video UV Buffer[0].VAddr=e076d000 PAddr=5076d000 size=462848
- Video UV Buffer[1].VAddr=e07de000 PAddr=507de000 size=462848
- Video UV Buffer[2].VAddr=e084f000 PAddr=5084f000 size=462848
- <6>brd: module loaded
- <6>loop: module loaded
- <6>Android kernel panic handler initialized (bind=kpanic)
- <6>Loading pn544 driver
- <6>sec_jack_probe : Registering jack driver
- <6>wake enabled for irq 38
- <6>wake enabled for irq 167
- <6>fsa9480 1-0025: dev1: 0x8, dev2: 0x0
- <4>i2c-core: driver [fsa9480] using legacy suspend method
- <4>i2c-core: driver [fsa9480] using legacy resume method
- <6>Samsung OneNAND Driver (AUDI).
- <6>OneNAND: Clock gating is enabled.
- <7>OneNAND Manufacturer: Samsung (0xec)
- <6>Muxed OneNAND 1024MB 1.8V 16-bit (0x60)
- <6>OneNAND version = 0x0031
- <7>Chip support all block unlock
- <7>Chip has single dataram
- <6>OneNAND Sync. Burst Read support
- <6>OneNAND Sync. Burst Write support
- <6>OneNAND: There's no interrupt. We use the normal wait
- <6>Scanning device for bad blocks
- <6>onenand_bbt_wait: ecc error = 0x0001, controller error 0x0400
- <6>OneNAND eraseblock 2832 is an initial bad block
- <6>onenand_bbt_wait: ecc error = 0x0001, controller error 0x0400
- <6>OneNAND eraseblock 2874 is an initial bad block
- <6>OneNAND eraseblock 4095 is an initial bad block
- <5>Creating 6 MTD partitions on "s5p-onenand":
- <5>0x000001200000-0x000001980000 : "boot"
- <5>0x000001980000-0x000002100000 : "recovery"
- <5>0x000002100000-0x0000051c0000 : "system"
- <5>0x0000051c0000-0x00003e880000 : "userdata"
- <5>0x00003e880000-0x00003eb00000 : "cache"
- <5>0x00003eb00000-0x000040000000 : "reservoir"
- <6>tl2796_probe successfully proved
- <6>PPP generic driver version 2.4.2
- <6>PPP Deflate Compression module registered
- <6>PPP BSD Compression module registered
- <6>PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- <6>tun: Universal TUN/TAP device driver, 1.6
- <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[WGPIO] WIMAXGPIO: 1.0.1, Samsung WiMax SDIO GPIO Device Driver
- <1>[WGPIO] IOCTL SDIO GPIO driver installing
- <6>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
- s3c-udc : version 15 March 2009 (DMA Mode)
- <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>android_usb gadget: Number of LUNs=1
- <6> lun0: LUN: removable file: (no medium)
- <6>android_usb gadget: android_usb ready
- <7>Registered gadget driver 'android_usb'
- can_request_irq=0
- <6>wake enabled for irq 37
- @@ Slidegpio_isr_setup
- <6>input: s3c-keypad as /devices/virtual/input/input0
- s3c-keypad Initialized
- <6>S3C Keypad Driver
- <6>usbcore: registered new interface driver xpad
- <6>usbcore: registered new interface driver usb_acecad
- <6>acecad: v3.2:USB Acecad Flair tablet driver
- <6>usbcore: registered new interface driver aiptek
- <6>aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>usbcore: registered new interface driver gtco
- GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver hanwang
- <6>usbcore: registered new interface driver kbtab
- <6>kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>usbcore: registered new interface driver wacom
- <6>wacom: v1.52:USB Wacom tablet driver
- <6>bma023 1-0038: bma023 found
- <6>bma023 1-0038: al_version=2, ml_version=1
- <6>input: accelerometer_sensor as /devices/virtual/input/input1
- <6>input: magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input2
- <6>input: raw_magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input3
- <4>i2c-core: driver [yas529] using legacy suspend method
- <4>i2c-core: driver [yas529] using legacy resume method
- <6>input: orientation_sensor as /devices/virtual/input/input4
- <6>wake enabled for irq 166
- <6>GPIO Input Driver: Start gpio inputs for victory-keypad in interrupt mode
- <6>input: victory-keypad as /devices/virtual/input/input5
- <6>input: proximity_sensor as /devices/virtual/input/input6
- <6>input: light_sensor as /devices/virtual/input/input7
- <6>max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
- S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>using rtc device, s3c, for alarms<6>s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
- <6>i2c /dev entries driver
- <6>lirc_dev: IR Remote Control driver registered, major 250
- <6>IR NEC protocol handler initialized
- <6>IR RC5(x) protocol handler initialized
- <6>IR RC6 protocol handler initialized
- <6>IR JVC protocol handler initialized
- <6>IR Sony protocol handler initialized
- <6>IR RC5 (streamzap) protocol handler initialized
- <6>IR LIRC bridge handler initialized
- <6>Linux video capture interface: v2.00
- <6>gspca: v2.13.0 registered
- <6>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
- <6>S3C JPEG Driver, (c) 2007 Samsung Electronics
- <6>JPEG driver for S5PV210
- <6>max17040 9-0036: MAX17040 Fuel-Gauge Ver 03
- <6>device-mapper: uevent: version 1.0.3
- <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>Bluetooth: HCI UART driver ver 2.2
- <6>Bluetooth: HCI H4 protocol initialized
- <6>cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- <6>sdhci: Secure Digital Host Controller Interface driver
- <6>sdhci: Copyright(c) Pierre Ossman
- <6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
- <6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
- <6>mmc0: no vmmc regulator found
- <7>Registered led device: mmc0::
- <6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
- <6>s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
- <6>s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
- <6>mmc1: no vmmc regulator found
- <7>Registered led device: mmc1::
- <6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
- <6>s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
- <6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
- <6>mmc2: no vmmc regulator found
- <7>Registered led device: mmc2::
- <6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <7>Registered led device: red
- <7>Registered led device: blue
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- <6>logger: created 256K log 'log_main'
- <6>logger: created 256K log 'log_events'
- <6>logger: created 256K log 'log_radio'
- <6>logger: created 256K log 'log_system'
- <3>pdp_activate, id: 1
- <3>ttyCSD(id: 1) serial device is created.
- <3>pdp_activate, id: 7
- <3>ttyCDMA(id: 7) serial device is created.
- <3>pdp_activate, id: 9
- <3>ttyTRFB(id: 9) serial device is created.
- <3>pdp_activate, id: 0
- <3>failed to create a serial device for
- <6>wake enabled for irq 43
- <3>[OneDRAM] PHONE_ACTIVE level: LOW , sem: 1, phone_sync: 0
- <6>level device init
- <6>WM8994 Audio Codec 0.1
- <6>s3c_idma_preallocate_buffer: VA-e80c0000 PA-C0000000 163840bytes
- <6>asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
- <6>ALSA device list:
- <6> #0: smdkc110
- <6>oprofile: hardware counters not available
- <6>oprofile: using timer interrupt.
- <6>GACT probability NOT on
- <6>Mirror/redirect action on
- <6>u32 classifier
- <6> Actions configured
- <6>Netfilter messages via NETLINK v0.30.
- <6>nf_conntrack version 0.5.0 (5887 buckets, 23548 max)
- <6>ctnetlink v0.93: registering with nfnetlink.
- <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>xt_time: kernel timezone is -0000
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP cubic registered
- <6>NET: Registered protocol family 10
- <6>Mobile IPv6
- <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>IPv6 over IPv4 tunneling driver
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>Bluetooth: RFCOMM TTY layer initialized
- <6>Bluetooth: RFCOMM socket layer initialized
- <6>Bluetooth: RFCOMM ver 1.11
- <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>NET: Registered protocol family 35
- <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
- <6>ThumbEE CPU extension supported.
- <6>s5pv210_cpufreq_init: S5PV210 cpu-freq driver
- <4>regulator_init_complete: VCC_1.8V: incomplete constraints, leaving on
- <4>regulator_init_complete: VDD_INT: incomplete constraints, leaving on
- <4>regulator_init_complete: VDD_ARM: incomplete constraints, leaving on
- <4>regulator_init_complete: CAM_SENSOR_CORE_1.8V: incomplete constraints, leaving on
- <4>regulator_init_complete: VADC_3.3V: incomplete constraints, leaving on
- <4>regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
- <4>regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
- <4>regulator_init_complete: pd_cam_supply: incomplete constraints, leaving on
- ## wifi_probe
- wifi_set_power = 1
- wifi_set_carddetect = 1
- <6>mmc2: new high speed SDHC card at address e68b
- <6>mmcblk0: mmc2:e68b SU08G 7.40 GiB
- <6> mmcblk0: p1
- <4>mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
- <4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- <4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- <6>mmc1: new SDIO card at address 0001
- F1 signature read @0x18000000=0x9934329
- DHD: dongle ram size is set to 294912(orig 294912)
- wl_create_event_handler thr:45 started
- dhd_attach thr:46 started
- dhd_attach thr:47 started
- dhd_attach thr:48 started
- Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- Dongle Host Driver, version 5.90.195.104
- Compiled in drivers/net/wireless/bcmdhd on Aug 19 2013 at 20:51:42
- wifi_set_power = 0
- =========== WLAN placed in RESET ========
- <6>input: cypress-touchkey as /devices/virtual/input/input8
- <6>cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x37, rev2 = 0xc0
- irq number = 308
- <7>+-----------------------------------------+
- <7>| Quantum Touch Driver Probe! |
- <7>+-----------------------------------------+
- <6>input: qt602240_ts_input as /devices/virtual/input/input9
- <3>0x1c<3>0x34<3>0xff<3>0x00<3>
- <3>0x1c<3>0x34<3>0xff<3>0x00<3>
- <7>[TSP] msg id = 1 90 65 48 71 0 0 0 0
- <6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- <6>s3c-rtc s3c2410-rtc: setting system clock to 2005-01-01 00:00:14 UTC (1104537614)
- <6>FIMC0 registered successfully
- <7>[TSP] msg id = 1 0 65 48 71 0 0 0 0
- <6>FIMC1 registered successfully
- <6>FIMC2 registered successfully
- <6>max8998_charger_probe : MAX8998 Charger Driver Loading
- <6>max8998_charger_probe : pmic interrupt registered
- <6>check_lpm_charging_mode : lpm_charging_mode(0)
- <6>wake enabled for irq 39
- <4>Warning: unable to open an initial console.
- <6>Freeing init memory: 796K
- <6>yaffs: dev is 32505858 name is "mtdblock2" rw
- <6>yaffs: passed flags ""
- <7>yaffs: Attempting MTD mount of 31.2,"mtdblock2"
- <7>yaffs: yaffs_read_super: is_checkpointed 1
- <30>systemd-udevd[154]: starting version 204
- initrd: mounting /dev/mtdblock3
- <3>VFS: could not find a valid V7 on mtdblock3.
- <6>yaffs: dev is 32505859 name is "mtdblock3" rw
- <6>yaffs: passed flags ""
- <7>yaffs: Attempting MTD mount of 31.3,"mtdblock3"
- <7>yaffs: auto selecting yaffs2
- <3>onenand_wait: ECC error = 0x0001
- <3>onenand_wait: ECC error = 0x0001
- <7>yaffs: block 2506 is bad
- <7>yaffs: block 2548 is bad
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>onenand_wait: correctable ECC error = 0x0002
- <7>yaffs: yaffs_read_super: is_checkpointed 0
- <4>init: ureadahead main process (229) terminated with status 5
- <3>init: could not import file '/init.carrier.rc' from '/init.rc'
- <4>init (395): /proc/395/oom_adj is deprecated, please use /proc/395/oom_score_adj instead.
- <3>init: cannot open '/initlogo.rle'
- <6>init: command 'loglevel' r=0
- <6>init: command 'export' r=0
- <6>init: command 'stop' r=0
- <6>init: processing action 0x3a370 (init)
- <6>init: command 'export' r=0
- <6>init: command 'export' r=0
- <6>init: command 'export' r=0
- <6>init: processing action 0x2cfb8 (fs)
- <6>init: mtd partition 0, boot
- <6>init: mtd partition 1, recovery
- <6>init: mtd partition 2, system
- <6>init: mtd partition 3, userdata
- <6>init: mtd partition 4, cache
- <6>init: mtd partition 5, reservoir
- <6>yaffs: dev is 32505858 name is "mtdblock2" rw
- <6>yaffs: passed flags ""
- <7>yaffs: Attempting MTD mount of 31.2,"mtdblock2"
- <7>yaffs: yaffs_read_super: is_checkpointed 1
- <6>init: command 'mount' r=0
- <6>init: command 'mount' r=0
- <6>init: command 'mount' r=-1
- <6>yaffs: dev is 32505860 name is "mtdblock4" rw
- <6>yaffs: passed flags ""
- <7>yaffs: Attempting MTD mount of 31.4,"mtdblock4"
- <7>yaffs: yaffs_read_super: is_checkpointed 0
- <6>init: command 'mount' r=0
- <6>init: processing action 0x35590 (fs)
- <6>init: command 'export' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'symlink' r=0
- <6>init: command 'symlink' r=0
- <6>init: processing action 0x2d0a0 (post-fs)
- <6>init: command 'mount' r=-1
- <6>init: command 'mount' r=0
- <6>init: command 'mount' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'restorecon' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'restorecon' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'mkdir' r=0
- <6>init: processing action 0x35668 (post-fs)
- <6>init: command 'insmod' r=0
- <6>C730SDIO: 1.0.1, Samsung WiBro SDIO Device Driver
- <1>[WiMAX] SDIO driver installing
- <6>init: command 'insmod' r=0
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'exec' r=0
- <6>init: command 'exec' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'exec' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: processing action 0x2d400 (post-fs-data)
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'restorecon' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'copy' r=-1
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'copy' r=-1
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'write' r=-2
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'chmod' r=-2
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: processing action 0x30e10 (post-fs-data)
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: processing action 0x376b8 (post-fs-data)
- <6>init: command 'mkdir' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=-30
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'mkdir' r=0
- <6>init: command 'setprop' r=0
- <6>init: processing action 0x3a418 (post-fs-data)
- <6>init: command 'mkdir' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'mkdir' r=0
- <5>init: starting 'sysinit'
- <6>init: command 'start' r=0
- <6>init: processing action 0x3aa00 (property_service_init)
- <6>init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
- <6>init: command 'property_service_init' r=0
- <6>init: processing action 0x3aa48 (signal_init)
- <6>init: command 'signal_init' r=0
- <6>init: processing action 0x3aa90 (check_startup)
- <6>init: command 'check_startup' r=0
- <6>init: processing action 0x2db80 (boot)
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: waitpid returned pid 6, status = 00000000
- <5>init: process 'sysinit', pid 6 exited
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'ifup' r=0
- <6>init: command 'hostname' r=0
- <6>init: command 'domainname' r=0
- <6>init: command 'setrlimit' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <5>init: starting 'servicemanager'
- <5>init: starting 'victory-rild'
- <5>init: starting 'pvrsrvinit'
- <6>init: command 'class_start' r=0
- <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
- <5>init: starting 'debuggerd'
- <5>init: starting 'surfaceflinger'
- <6>init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
- <5>init: starting 'drm'
- <5>init: starting 'media'
- <5>init: starting 'installd'
- <5>init: starting 'ubuntuappmanager'
- <6>init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
- <5>init: starting 'compcache'
- <6>PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [545, /home/annerabj/android/kernel/samsung/epicmtd/drivers/gpu/pvr/s5pc110/sysconfig.c]
- <6>init: command 'class_start' r=0
- <6>init: processing action 0x35e18 (boot)
- <6>init: command 'mount' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>init: waitpid returned pid 19, status = 00000000
- <5>init: process 'pvrsrvinit', pid 19 exited
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'setprop' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <3>[OneDRAM] - DPRAM_PHONE_POWON ioctl.
- <6>s3cfb s3cfb: [fb0] dma: 0x4fc00000, cpu: 0xeb800000, size: 0x00465000
- <3>[OneDRAM] Phone Power on! sem: 1 lock: 0
- <6>init: command 'chown' r=0
- <3>[OneDRAM] set semaphore: 0
- <6>init: command 'chown' r=0
- <3>[OneDRAM] power control (with GPIO_PHONE_RST_N)
- <6>init: command 'chown' r=0
- <3>init: no such service 'bootanim'
- <6>init: waitpid returned pid 26, status = 00000000
- <5>init: process 'compcache', pid 26 exited
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <3>[OneDRAM] PHONE_ACTIVE level: HIGH, sem: 0, phone_sync: 0
- <3>[OneDRAM] command_handler:2469 - <3>Unknown command.. ff3f
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: processing action 0x38d30 (boot)
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=-22
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: command 'write' r=0
- <6>init: processing action 0x39a98 (boot)
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: processing action 0x3a518 (boot)
- <6>init: command 'chown' r=0
- <6>init: command 'chmod' r=0
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'chown' r=-2
- <6>init: command 'chmod' r=-2
- <6>init: command 'write' r=-2
- <6>init: command 'write' r=-2
- <6>init: processing action 0x3aad8 (queue_property_triggers)
- <6>init: command 'queue_property_triggers' r=0
- <6>init: processing action 0x2f1a8 (property:ro.debuggable=1)
- <5>init: starting 'console'
- <6>init: command 'start' r=0
- <6>init: processing action 0x31808 (property:persist.sys.usb.config=*)
- <6>init: command 'setprop' r=0
- <3>kernel_sec_lfs_debug_level_op: filp_open failed. (-2)
- <5>(kernel_sec_get_debug_level_from_param) The debug value is invalid(0x0)!! Set default level(LOW)
- [oneDRAM] Unknown Cmd: 5401
- [oneDRAM] Unknown Cmd: 5401
- [oneDRAM] Unknown Cmd: 5402
- [oneDRAM] Unknown Cmd: 5401
- [oneDRAM] Unknown Cmd: 5402
- <3>[OneDRAM] Received 0xc8 from MailboxAB (Phone Boot OK).
- <3>[OneDRAM] dpram_init_and_report, sem: 0
- <3>=====> send IRQ: cd
- <3>[OneDRAM] Send 0xc2 to MailboxBA (onedram init finish).
- <3>init: sys_prop: permission denied uid:1001 name:ro.cdma.home.operator.alpha
- <3>init: sys_prop: permission denied uid:1001 name:ro.cdma.home.operator.numeric
- - DPRAM_PHONE_ON ioctl.
- <6>init: processing action 0x37668 (property:ril.bt_macaddr=*)
- <5>init: starting 'bdaddr'
- <6>init: command 'start' r=0
- <6>init: waitpid returned pid 59, status = 00000000
- <5>init: process 'bdaddr', pid 59 exited
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement