Marlin-Error_0

21:26:10.171 : start
21:26:10.171 : echo: External Reset
21:26:10.171 : Marlin1.0.2
21:26:10.171 : echo: Last Updated: Mar 23 2015 21:25:02 | Author: (none, default config)
21:26:10.171 : Compiled: Mar 23 2015
21:26:10.181 : echo: Free Memory: 3155  PlannerBufferBytes: 1232
21:26:10.181 : echo:Hardcoded Default Settings Loaded
21:26:10.181 : echo:Steps per unit:
21:26:10.181 : echo:  M92 X80.00 Y80.00 Z4000.00 E500.00
21:26:10.181 : echo:Maximum feedrates (mm/s):
21:26:10.181 : echo:  M203 X300.00 Y300.00 Z5.00 E25.00
21:26:10.181 : echo:Maximum Acceleration (mm/s2):
21:26:10.191 : echo:  M201 X3000 Y3000 Z100 E10000
21:26:10.191 : echo:Accelerations: P=printing, R=retract and T=travel
21:26:10.191 : echo:  M204 P3000.00 R3000.00 T3000.00
21:26:10.201 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
21:26:10.201 : echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
21:26:10.201 : echo:Home offset (mm):
21:26:10.211 : echo:  M206 X0.00 Y0.00 Z0.00
21:26:10.211 : echo:PID settings:
21:26:10.211 : echo:   M301 P22.20 I1.08 D114.00
21:26:10.211 : echo:Filament settings: Disabled
21:26:10.211 : echo:Z-Probe Offset (mm):
21:26:10.211 : echo:   M851 Z0.00
21:26:10.221 : Error:0
21:26:10.221 : : Extruder switched off. MINTEMP triggered !
21:26:10.221 : Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
21:26:10.683 : N1 M110 *2
21:26:10.683 : N1 M110 *2
21:26:10.683 : N2 M115 *4
21:26:10.783 : N3 M105 *4
21:26:11.133 : N4 M111 S7 *66
21:26:11.133 : N5 T0 *31
21:26:11.133 : N6 M20 *55
21:26:11.133 : N7 M80 *60
21:26:11.756 : echo:SD card ok
21:26:11.756 : N8 M20 *57
21:26:11.861 : N9 M220 S100 *72
21:26:11.861 : N10 M221 S100 *113
21:26:11.861 : N11 M111 S7 *118
21:26:11.861 : echo:Active Extruder: 0
21:26:11.861 : Begin file list
21:26:11.861 : ANDROI~1.GCO
21:26:11.861 : N12 T0 *41
21:26:11.861 : End file list
21:26:11.861 : Begin file list
21:26:11.861 : ANDROI~1.GCO
21:26:11.861 : End file list
21:26:11.871 : echo:Active Extruder: 0
21:26:13.836 : N13 M105 *53